Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Temperature effect on zinc oxysulfide-Zn(O,S) films synthesized by atomic layer deposition for Cu(In,Ga)Se{sub 2} solar cells

Thin films of Zn(O,S) were deposited by atomic layer deposition from diethylzinc, water (H{sub 2}O), and hydrogen sulfide (H{sub 2}S). First, a study on the influence of the H{sub 2}S/(H{sub 2}O+H{sub 2}S) pulse ratio from pure ZnO to pure ZnS was performed at deposition temperature T{sub dep}=120 and 200 °C. Zn(O,S) films had higher S content than expected, and this effect was stronger at T{sub dep}=200 °C. Then, Zn(O,S) films have been synthesized over the range of temperature 120–220 °C at the constant H{sub 2}S/(H{sub 2}O+H{sub 2}S) pulse ratio of 9%. For T{sub dep}<180 °C, high and almost constant S content has been measured in the films. The significant increase of the S/(O+S) atomic ratio for T{sub dep}>180 °C confirmed that exchange reactions occurred between the Zn(O,S) growing films and H{sub 2}S. The grazing incidence x-ray diffraction patterns showed Zn(O,S) films with hexagonal wurtzite structures and with an optimum crystallization for temperatures T{sub dep}=160–180 °C. Indeed, in this temperature range, well crystallized and large grains were obtained which was in good correlation with the film morphology determined by scanning electron microscope; and Hall effect measurements revealed low resistivities, high carrier concentrations (>10{sup 19} cm{sup −3}), and low mobilities. From these results, the authors propose the existence of a temperature range where the properties undergo significant changes while the atomic composition remains constant.

36 MATERIALS SCIENCE↗

Surface passivation of Fe{sub 3}O{sub 4} nanoparticles with Al{sub 2}O{sub 3} via atomic layer deposition in a rotating fluidized bed reactor

Iron(II,III) oxide (Fe{sub 3}O{sub 4}) nanoparticles have shown great promise in many magnetic-related applications such as magnetic resonance imaging, hyperthermia treatment, and targeted drug delivery. Nevertheless, these nanoparticles are vulnerable to oxidation and magnetization loss under ambient conditions, and passivation is usually required for practical applications. In this work, a home-built rotating fluidized bed (RFB) atomic layer deposition (ALD) reactor was employed to form dense and uniform nanoscale Al{sub 2}O{sub 3} passivation layers on Fe{sub 3}O{sub 4} nanoparticles. The RFB reactor facilitated the precursor diffusion in the particle bed and intensified the dynamic dismantling of soft agglomerates, exposing every surface reactive site to precursor gases. With the aid of in situ mass spectroscopy, it was found that a thicker fluidization bed formed by larger amount of particles increased the residence time of precursors. The prolonged residence time allowed more thorough interactions between the particle surfaces and the precursor gas, resulting in an improvement of the precursor utilization from 78% to nearly 100%, even under a high precursor feeding rate. Uniform passivation layers around the magnetic cores were demonstrated by both transmission electron microscopy and the statistical analysis of Al mass concentrations. Individual particles were coated instead of the soft agglomerates, as was validated by the specific surface area analysis and particle size distribution. The results of thermogravimetric analysis suggested that 5 nm-thick ultrathin Al{sub 2}O{sub 3} coatings could effectively protect the Fe{sub 3}O{sub 4} nanoparticles from oxidation. The x-ray diffraction patterns also showed that the magnetic core crystallinity of such passivated nanoparticles could be well preserved under accelerated oxidation conditions. The precise thickness control via ALD maintained the saturation magnetization at 66.7 emu/g with a 5 nm-thick Al{sub 2}O{sub 3} passivation layer. This good preservation of the magnetic properties with superior oxidation resistance will be beneficial for practical magnetic-based applications.

36 MATERIALS SCIENCE↗

Preparation and Properties of FeCo Nanoparticles

Fe-Co nanoparticles were prepared from the binary Fe-Co oxalate. The formation of FeCo metallic phase begun at 290 deg. C as determined from the X-ray diffraction patterns recorded during heating of the oxalate sample in hydrogen atmosphere. The reduction finished at 500 deg. C by formation of bcc FeCo phase with a mean particle size of about 50 nm. Analysis of the Moessbauer spectra shows that the ferromagnetic FeCo phase is represented by two sextets corresponding to interiors and surfaces of the nanoparticles. In addition, a weak paramagnetic component, represented by the doublet, was observed which was ascribed to fine particles in a superparamagnetic state. TEM images have shown conglomerates of particles with the composition of about 50 at. % Fe and 50 at. % Co.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and Raman scattering study of Ni-doped CoFe{sub 2}O{sub 4}

Raman scattering measurements were made on polycrystalline CoFe{sub 2}O{sub 4} and Co{sub 0.5}Ni{sub 0.5}Fe{sub 2}O{sub 4} ferrites as prepared by solid-state reaction route. Rietveld refined X-ray diffraction pattern confirmed the formation of single-phase and both of the samples perfectly indexed in cubic spinel structure with Fd3m space group. Slight reduction in the lattice parameter of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2}O{sub 4} has been observed as compared to CoFe{sub 2}O{sub 4}. From Raman scattering spectra, a shoulder like feature has been observed in both of the compounds reveals that octahedral site is occupied by Co, Ni and Fe ions and tetrahedral site is occupied by only Fe ion.

36 MATERIALS SCIENCE↗

Structural and optical changes induced by incorporation of antimony into InAs/GaAs(001) quantum dots

We present experimental evidence of Sb incorporation inside InAs/GaAs(001) quantum dots exposed to an antimony flux immediately before capping with GaAs. The Sb composition profile inside the nanostructures as measured by cross-sectional scanning tunneling and electron transmission microscopies show two differentiated regions within the quantum dots, with an Sb rich alloy at the tip of the quantum dots. Atomic force microscopy and transmission electron microscopy micrographs show increased quantum-dot height with Sb flux exposure. The evolution of the reflection high-energy electron-diffraction pattern suggests that the increased height is due to changes in the quantum-dot capping process related to the presence of segregated Sb atoms. These structural and compositional changes result in a shift of the room-temperature photoluminescence emission from 1.26 to 1.36 {mu}m accompanied by an order of magnitude increase in the room-temperature quantum-dot luminescence intensity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanoflow electrospinning serial femtosecond crystallography

A low flow rate liquid microjet method for delivery of hydrated protein crystals to X-ray lasers is presented. Linac Coherent Light Source data demonstrates serial femtosecond protein crystallography with micrograms, a reduction of sample consumption by orders of magnitude. An electrospun liquid microjet has been developed that delivers protein microcrystal suspensions at flow rates of 0.14–3.1 µl min{sup −1} to perform serial femtosecond crystallography (SFX) studies with X-ray lasers. Thermolysin microcrystals flowed at 0.17 µl min{sup −1} and diffracted to beyond 4 Å resolution, producing 14 000 indexable diffraction patterns, or four per second, from 140 µg of protein. Nanoflow electrospinning extends SFX to biological samples that necessitate minimal sample consumption.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Necessary Experimental Conditions for Single-Shot Diffraction Imaging of DNA-Based Structures with X-ray Free-Electron Lasers

It has been proposed that the radiation damage to biological particles and soft condensed matter can be overcome by ultrafast and ultraintense X-ray free-electron lasers (FELs) with short pulse durations. The successful demonstration of the “diffraction-before-destruction” concept has made single-shot diffraction imaging a promising tool to achieve high resolutions under the native states of samples. However, the resolution is still limited because of the low signal-to-noise ratio, especially for biological specimens such as cells, viruses, and macromolecular particles. Here, we present a demonstration single-shot diffraction imaging experiment of DNA-based structures at SPring-8 Angstrom Compact Free Electron Laser (SACLA), Japan. Through quantitative analysis of the reconstructed images, the scattering abilities of gold and DNA were demonstrated. Suggestions for extracting valid DNA signals from noisy diffraction patterns were also explained and outlined. To sketch out the necessary experimental conditions for the 3D imaging of DNA origami or DNA macromolecular particles, we carried out numerical simulations with practical detector noise and experimental geometry using the Linac Coherent Light Source (LCLS) at the SLAC National Accelerator Laboratory, USA. In conclusion, the simulated results demonstrate that it is possible to capture images of DNA-based structures at high resolutions with the technique development of current and next-generation X-ray FEL facilities.

59 BASIC BIOLOGICAL SCIENCES↗

Rumpling of LiF(001) surface from fast atom diffraction

Quantum diffraction of fast atoms scattered from the topmost layer of surfaces under grazing angles of incidence can be employed for the analysis of detailed structural properties of insulator surfaces. From comparison of measured and calculated diffraction patterns we deduce the rumpling of the topmost surface layer of LiF(001) (i.e., an inward shift of Li{sup +} ions with respect to F{sup -} ions). The effect of thermal vibrations on the measurement of rumpling is accounted for by ab initio calculations of the mean-square vibrational amplitudes of surface ions. At room temperature this leads to a reduction of the apparent rumpling by 0.008 A. We then obtain a rumpling of (0.05{+-}0.04) A, which improves its accuracy achieved in previous work.

36 MATERIALS SCIENCE↗

Simulations of radiation damage as a function of the temporal pulse profile in femtosecond X-ray protein crystallography

Serial femtosecond X-ray crystallography of protein nanocrystals using ultrashort and intense pulses from an X-ray free-electron laser has proved to be a successful method for structural determination. However, due to significant variations in diffraction pattern quality from pulse to pulse only a fraction of the collected frames can be used. Experimentally, the X-ray temporal pulse profile is not known and can vary with every shot. This simulation study describes how the pulse shape affects the damage dynamics, which ultimately affects the biological interpretation of electron density. The instantaneously detected signal varies during the pulse exposure due to the pulse properties, as well as the structural and electronic changes in the sample. Here ionization and atomic motion are simulated using a radiation transfer plasma code. Pulses with parameters typical for X-ray free-electron lasers are considered: pulse energies ranging from 10 4 to 10 7 J cm -2 with photon energies from 2 to 12 keV, up to 100 fs long. Radiation damage in the form of sample heating that will lead to a loss of crystalline periodicity and changes in scattering factor due to electronic reconfigurations of ionized atoms are considered here. The simulations show differences in the dynamics of the radiation damage processes for different temporal pulse profiles and intensities, where ionization or atomic motion could be predominant. Overall, the different dynamics influence the recorded diffracted signal in any given resolution and will affect the subsequent structure determination.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nano-scale orientation mapping of graphite in cast irons

A diametrical section of a graphite spheroid from a ductile iron sample was prepared using the focused ion beam-lift out technique. Characterization of this section was carried out through automated crystal orientation mapping in a transmission electron microscope. This new technique automatically collects electron diffraction patterns and matches them with precalculated templates. The results of this investigation are crystal orientation and phase maps of the specimen, which bring new light to the understanding of growth mechanisms of this peculiar graphite morphology. This article shows that mapping the orientation of carbon-based materials such as graphite, which is difficult to achieve with conventional techniques, can be performed automatically and at high spatial resolution using automated crystal orientation mapping in a transmission electron microscope. - Highlights: • ACOM/TEM can be used to study the crystal orientation of carbon-based materials. • A spheroid is formed by conical sectors radiating from a central nuclei. • Misorientations exist within the conical sectors, defining various orientation domains.

36 MATERIALS SCIENCE↗

Investigations on the temperature dependent electrical and magnetic properties of NiTiO{sub 3} by molten salt synthesis

Highlights: ► NiTiO{sub 3} particles were synthesized by simple molten salt technique. ► The single phase compound formation was confirmed through XRD analysis. ► The detailed impedance properties of NiTiO{sub 3} were studied at elevated temperature. ► The conductance spectra were fitted using Jonscher Power Law. ► Low temperature magnetization behaviour was explained by core shell model. - Abstract: Submicron-sized NiTiO{sub 3} particles were successfully synthesized by simple molten salt method. The phase purity and crystal structure was confirmed through X-ray diffraction. The characteristics bands of Ni-O and Ti-O were identified using Fourier Transform Infra-red spectrum. The SEM and TEM images shows that the particles are lying in the range of 150–300 nm and selected area electron diffraction pattern (SAED) infers the single crystalline nature of NiTiO{sub 3}. The impedance spectra elucidate the grain interior conducting mechanism and semi-conducting nature of NiTiO{sub 3} at elevated temperatures. The frequency dependent conductance spectra were found to obey Jonscher's power law and a maximum value of conductivity observed was 2 × 10{sup −5} S cm{sup −1} at 520 °C. The magnetic susceptibility measurement infers the antiferromagnetic behavior with the Neel temperature (T{sub N}) of 14.9 K. The increase in coercivity below T{sub N} reveals the coexistence of antiferromagnetic with superparamagnetic behavior. B–H curve represents the first order phase transition from antiferromagnetic to ferromagnetic transition.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis and formation mechanism of hexagonal yttrium hydroxide fluoride nanobundles

Graphical abstract: The formation of yttrium hydroxide fluorides nanobundles can be expressed as a precipitation transformation from cubic NaYF{sub 4} to hexagonal NaYF{sub 4} and to hexagonal Y(OH){sub 2.02}F{sub 0.98} owing to ion exchange. - Highlights: • Novel Y(OH){sub 2.02}F{sub 0.98} nanobundles have been successfully prepared by hydrothermal method. • The branched nanobundles composed of numerous oriented-attached nanoparticles has been studied. • The growth mechanism is proposed to be ion exchange and precipitation transformation. - Abstract: This article presents the fabrication of hexagonal yttrium hydroxide fluoride nanobundles via one-pot hydrothermal process, using yttrium nitrate, sodium hydroxide and ammonia fluoride as raw materials to react in propanetriol solvent. The X-ray diffraction pattern clearly reveals that the grown product is pure yttrium hydroxide fluoride, namely Y(OH){sub 2.02}F{sub 0.98}. The morphology and microstructure of the synthesized product is testified to be nanobundles composed of numerous oriented-attached nanoparticles as observed from the field emission scanning electron microscopy (FESEM). The chemical composition was analyzed by the energy dispersive spectrum (EDS), confirming the phase transformation of the products which was clearly consistent with the result of XRD analysis. It is proposed that the growth of yttrium hydroxide fluoride nanobundles be attributed to ion exchange and precipitation transformation.

36 MATERIALS SCIENCE↗

Long ranged structural modulation in the pre-morphotropic phase boundary cubic-like state of the lead-free piezoelectric Na{sub 1/2}Bi{sub 1/2}TiO{sub 3}-BaTiO{sub 3}

The nature of the pre-morphotropic phase boundary (MPB) cubic-like state in the lead-free piezoelectric ceramics (1−x)Na{sub 1/2}Bi{sub 1/2}TiO{sub 3}-(x)BaTiO{sub 3} at x ∼ 0.06 has been examined in detail by electric field and temperature dependent neutron diffraction, x-ray diffraction, dielectric and ferroelectric characterization. The superlattice reflections in the neutron diffraction patterns cannot be explained with the tetragonal P4bm and the rhombohedral (R3c) phase coexistence model. The cubic like state is rather a result of long ranged modulated complex octahedral tilt. This modulated structure exhibits anomalously large dielectric dispersion. The modulated structure transforms to a MPB state on poling. The field-stabilized MPB state is destroyed and the modulated structure is restored on heating the poled specimen above the Vogel-Fulcher freezing temperature. The results show the predominant role of competing octahedral tilts in determining the nature of structural and polar states in Na{sub 1/2}Bi{sub 1/2}TiO{sub 3}-based ferroelectrics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Indium doped zinc oxide nanowire thin films for antireflection and solar absorber coating applications

Indium doped ZnO nanowire thin films were prepared by thermal oxidation of Zn-In metal bilayer films at 500°C. The ZnO:In nanowires are 20-100 nm in diameter and several tens of microns long. X-ray diffraction patterns confirm the formation of oxide and indicate that the films are polycrystalline, both in the as deposited and annealed states. The transmission which is <2% for the as deposited Zn-In films increases to >90% for the ZnO:In nanowire films. Significantly, the reflectance for the as deposited films is < 10% in the region between 200 to 1500 nm and < 2% for the nanowire films. Thus, the as deposited films can be used solar absorber coatings while the nanowire films are useful for antireflection applications. The growth of nanowires by this technique is attractive since it does not involve very high temperatures and the use of catalysts.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of structural phase transformation in FeGaO{sub 3} on its magnetic and ferroelectric properties

We investigate the structural phase transformation from orthorhombic to rhombohedral structure in FeGaO{sub 3} by adopting a combined effect of mechanical alloying/milling and solid state sintering techniques. The structural phase formation of the FeGaO{sub 3} compound has been characterized by X-ray diffraction pattern. Mechanical milling played a significant role on the stabilization of rhombohedral phase in FeGaO{sub 3}, where as high temperature sintering stabilized the system in orthorhombic phase. A considerable difference has been observed in magnetic and ferroelectric properties of the system in two phases. The system in rhombohedral (R-3c) phase exhibited better ferromagnetic and of ferroelectric properties at room temperature in comparison to orthorhombic (Pc2{sub 1}n) phase. The rhombohedral phase appears to be good for developing metal doped hematite system for spintronics applications and in that process mechanical milling played an important role.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of calcium on structural and morphological properties of BiMnO{sub 3} thin films

Bi{sub 1-x}Ca{sub x}MnO{sub 3} (x = 0, 0.1, 0.2, 0.4) thin films were deposited on n–type silicon (100) substrate by RF magnetron sputtering. The X-ray diffraction pattern showed that the films were in monoclinic structure with C2 space group. The crystallite size and strain in the prepared films were measured by W-H plot. The surface morphology of the films was examined by atomic force microscope. The thickness of films was measured by thickness monitor in the sputtering system. From the analysis, it has been concluded that the optimum level for calcium doping is 20 at.% in the Bi site of BiMnO{sub 3} thin film, which will lead a way for further research in the Ca doped BiMnO{sub 3} system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The kinetic dose limit in room-temperature time-resolved macromolecular crystallography

Protein X-ray structures are determined with ionizing radiation that damages the protein at high X-ray doses. As a result, diffraction patterns deteriorate with the increased absorbed dose. Several strategies such as sample freezing or scavenging of X-ray-generated free radicals are currently employed to minimize this damage. However, little is known about how the absorbed X-ray dose affects time-resolved Laue data collected at physiological temperatures where the protein is fully functional in the crystal, and how the kinetic analysis of such data depends on the absorbed dose. Here, direct evidence for the impact of radiation damage on the function of a protein is presented using time-resolved macromolecular crystallography. The effect of radiation damage on the kinetic analysis of time-resolved X-ray data is also explored.

59 BASIC BIOLOGICAL SCIENCES↗

Plasma Electrolytic Oxidation Coatings on Pure Ti Substrate: Effects of Na{sub 3}PO{sub 4} Concentration on Morphology and Corrosion Behavior of Coatings in Ringer’s Physiological Solution

Plasma electrolytic oxidation has been used as a relatively new method for applying ceramic coatings having different features. In the present study, commercially pure titanium is used as substrate, and effects of trisodium phosphate electrolyte concentration on the microstructure, as well as corrosion behavior of the coating in Ringer’s physiological solution are investigated. The morphology and phase compositions of coatings were analyzed by using scanning electron microscopy (SEM) and x-ray diffraction patterns. The study on the corrosion behavior of samples in a Ringer’s physiological solution was carried out using open-circuit potential potentiodynamic polarization and electrochemical impedance spectroscopy. The results of electrochemical analysis proved that higher concentration of phosphate electrolyte leads to increase in the corrosion resistance of applied coatings. Accordingly, obtained results revealed that the optimum electrolyte concentration for the best corrosion behavior was 20 g L{sup −1}. Furthermore, SEM images and reduction in the dielectric breakdown potential indicated that increase in the electrolyte concentration leads to morphological improvement and smoothening of the surface.

36 MATERIALS SCIENCE↗