Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffuser Flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Isopycnal Eddy Diffusivities and Critical Layers in the Kuroshio Extension from an Eddying Ocean Model

High spatial resolution isopycnal diffusivities are estimated in the Kuroshio Extension (KE) region (28°–40°N, 120°–190°E) from a global 1/10° Parallel Ocean Program (POP) simulation. The numerical float tracks are binned using a clustering approach. The number of tracks in each bin is thus roughly the same leading to diffusivity estimates that converge better than those in bins defined by a regular geographic grid. Cross-stream diffusivities are elevated in the southern recirculation gyre region, near topographic obstacles and downstream in the KE jet, where the flow has weakened. Along-stream diffusivities, which are much larger than cross-stream diffusivities, correlate well with the magnitudes of eddy velocity. The KE jet suppresses cross-stream mixing only in some longitude ranges. This study estimates the critical layer depth both from linear local baroclinic instability analysis and from eddy phase speeds in the POP model using the Radon transform. The latter is a better predictor of large mixing length in the cross-stream direction. Critical layer theory is most applicable in the intense jet regions away from topography.

54 ENVIRONMENTAL SCIENCES↗

Low cost solar array project. Cell and module formation research area. Process research of non-CZ silicon material

Liquid diffusion masks and liquid dopants to replace the more expensive CVD SiO2 mask and gaseous diffusion processes were investigated. Silicon pellets were prepared in the silicon shot tower; and solar cells were fabricated using web grown where the pellets were used as a replenishment material. Verification runs were made using the boron dopant and liquid diffusion mask materials. The average of cells produced in these runs was 13%. The relationship of sheet resistivity, temperature, gas flows, and gas composition for the diffusion of the P-8 liquid phosphorus solution was investigated. Solar cells processed from web grown from Si shot material were evaluated, and results qualified the use of the material produced in the shot tower for web furnace feed stock.

Source record↗

Determination of rarefied-flow aerodynamics of the Shuttle orbiter from flight measurements on STS-6 and STS-7

This report presents the flight data results from the High Resolution Accelerometer Package (HiRAP) experimment on the sixth and seventh Shuttle missions (i.e. STS-6 and STS-7). The data have been reduced to produce aerodynamic force coefficients, principally L/D in the rarefied flow regime. Also, a technique is used to extract approximate body-axis aerodynamic coefficients from the flight data. Comparisons of the rarefied transition flow aerodynamic behavior between the two sets of flight data indicate differences, primarily in the free-molecule flow coefficients; i.e. STS-7 shows a free-molecule flow behavior which correlates with diffuse surface reflection conditions, while STS-6 does not. The data have also been used to estimate the density profiles in the atmosphere. The atmospheric density is generated from 60 to 160 km from each flight. The density profiles produced have a primary wave structure and differences are observed between the two sets of flight data. A new rarefied transitional flow aerodynamic bridging formula has been generated from the flight data. Comparisons with the flight bridging formula and existing Monte Carlo and wind-tunnel data are made.

Blanchard, R. C.↗

Free-flight Performance of a Rocket-boosted, Air-launched 16-inch-diameter Ram-jet Engine at Mach Numbers up to 2.20

The investigation of air-launched ram-jet engines has been extended to include a study of models with a nominal design free-stream Mach number of 2.40. These models require auxiliary thrust in order to attain a flight speed at which the ram jet becomes self-accelerating. A rocket-boosting technique for providing this auxiliary thrust is described and time histories of two rocket-boosted ram-jet flights are presented. In one flight, the model attained a maximum Mach number of 2.20 before a fuel system failure resulted in the destruction of the engine. Performance data for this model are presented in terms of thrust and drag coefficients, diffuser pressure recovery, mass-flow ratio, combustion efficiency, specific fuel consumption, and over-all engine efficiency.

AIR INLETS - NOSE, ANNULAR↗

Experimental Investigation of a High Pressure Ratio Aspirated Fan Stage

The experimental investigation of an aspirated fan stage designed to achieve a pressure ratio of 3.4:1 at 1500 ft/sec is presented in this paper. The low-energy viscous flow is aspirated from diffusion-limiting locations on the blades and flowpath surfaces of the stage, enabling a very high pressure ratio to be achieved in a single stage. The fan stage performance was mapped at various operating speeds from choke to stall in a compressor facility at fully simulated engine conditions. The experimentally determined stage performance, in terms of pressure ratio and corresponding inlet mass flow rate, was found to be in good agreement with the three-dimensional viscous computational prediction, and in turn close to the design intent. Stage pressure ratios exceeding 3:1 were achieved at design speed, with an aspiration flow fraction of 3.5 percent of the stage inlet mass flow. The experimental performance of the stage at various operating conditions, including detailed flowfield measurements, are presented and discussed in the context of the computational analyses. The sensitivity of the stage performance and operability to reduced aspiration flow rates at design and off design conditions are also discussed.

Merchant, Ali↗

Extension to an analysis of turbulent swirling compressible flow for application to axisymmetric small gas turbine ducts

An existing computer program, the Axisymmetric Diffuser Duct Code (ADD code), which calculates compressible turbulent swirling flow through axisymmetric ducts was modified to permit calculation of flows through small gas turbine ducts with struts, guide vanes and large degrees of turning. The improvements include a coordinate generator, an end-wall loss model, and a generalized geometry capability to describe struts and guide vanes in ducts which turn more than 90 degrees. An improved output format was developed to provide the solution on any arbitrary plane in the duct and an extensive literature survey of calculation procedures used in gas turbine technology was completed which suggests improvements in the computer code. Calculations are presented for the flow through the AGT101 small gas turbine inlet duct and turbine exhaust diffuser which demonstrate the ADD code modifications implemented in the investigation. The computed results compare favorably with experimental results.

Anderson, O. L.↗

Advanced optical measuring systems for measuring the properties of fluids and structures

Four advanced optical models are reviewed for the measurement of visualization of flow and structural properties. Double-exposure, diffuse-illumination, holographic interferometry can be used for three-dimensional flow visualization. When this method is combined with optical heterodyning, precise measurements of structural displacements or fluid density are possible. Time-average holography is well known as a method for displaying vibrational mode shapes, but it also can be used for flow visualization and flow measurements. Deflectometry is used to measure or visualize the deflection of light rays from collimation. Said deflection occurs because of refraction in a fluid or because of reflection from a tilted surface. The moire technique for deflectometry, when combined with optical heterodyning, permits very precise measurements of these quantities. The rainbow schlieren method of deflectometry allows varying deflection angles to be encoded with colors for visualization.

Decker, A. J.↗

Annual Research Briefs - 1996, Center for Turbulence Research

Partial contents include: (1) Simulation of jet impingement heat transfer with the k-e-V2 model; (2) A new methodology for turbulence modelers using Direct Numerical Simulation (DNS) database analysis; (3) A particle representation model for the deformation of homogeneous turbulence; (4) Modeling of inhomogeneous compressible turbulence using a two-scale statistical theory; (5) Lewis number effects on partially premixed flames; (6) Conditional moment closure of mixing and reaction in turbulent non-premixed combustion; (7) Dynamic models for LES of turbulent front propagation with a spectral method; (8) Jet noise using large eddy simulation; (9) Towards numerical simulations of trailing-edge aeroacoustics; (10) A model for the onset of vortex breakdown; (11) Compressing an elliptic vortex: transition to turbulence by tumble breakdown; (12) A new method for the adaptive control of vortex-wall interactions; (13) Symmetries in turbulent boundary layer flows; (14) Near-wall models in large eddy simulations of flow behind a backward-facing step; (15) Assessment of the subgrid-scale models at low and high Reynolds numbers; (16) Large-eddy simulations of flow around a NACA 4412 airfoil using unstructured grids; (17) Progress on LES of flow past a circular cylinder; (18) Experimental investigation of flow through an asymmetric plane diffuser; (19) Progress in the large-eddy simulation of an asymmetric plane diffuser; (20) A numerical study of self-similarity in a turbulent plane wake using large-eddy simulation; (21) On the generation of turbulent inflow conditions for boundary layer simulations, and (22) A new class of finite difference schemes.

COMPUTATIONAL FLUID DYNAMICS↗

Thin Film Mediated Phase Change Phenomena: Crystallization, Evaporation and Wetting

We focus on two distinct materials science problems that arise in two distinct microgravity environments: In space and within the space of a polymeric network. In the former environment, we consider a near eutectic alloy film in contact with its vapor which, when evaporating on earth, will experience compositionally induced buoyancy driven convection. The latter will significantly influence the morphology of the crystallized end member. In the absence of gravity, the morphology will be dominated by molecular diffusion and Marangoni driven viscous flow, and we study these phenomena theoretically and experimentally. The second microgravity environment exists in liquids, gels, and other soft materials where the small mass of individual molecules makes the effect of gravity negligible next to the relatively strong forces of intermolecular collisions. In such materials, an essential question concerns how to relate the molecular dynamics to the bulk rheological behavior. Here, we observe experimentally the diffusive motion of a single molecule in a single polymer filament, embedded within a polymer network and find anomalous diffusive behavior.

Wettlaufer, John S.↗

Optical experiments on thermophoretically augmented submicron particle deposition from 'dusty' high temperature gas flows

A real-time laser reflectivity method and Pt ribbon targets are used to obtain experimental data on the initial deposition rate of MgO(s) particles of approximately 700 nm diameter from otherwise clean combustion products as a function of target temperature (about 950-1450 K) and mainstream gas temperature (about 1500-1600 K). These preliminary data are used to demonstrate the dominant role of thermophoresis (particle drift down a temperature gradient) and to assess the utility of recently developed theoretical methods for predicting and correlating the temperature dependence of thermophoretically augmented convective-diffusion 'dust' deposition rates from flowing hot gases.

Rosner, Daniel E.↗

Investigation on the use of a Freely Rotating Rotor at the Cowl Face of a Supersonic Conical Inlet to Reduce Inlet Flow Distortion

An investigation has been made on the use of a freely rotating rotor at the cowl face of a supersonic conical diffuser to determine its effectiveness in reducing inlet flow distortion and the penalty in terms of total-pressure loss imposed by such a device when distortions are negligible. Tests were made with a rotor having an inlet tip diameter of 2.18 inches and a ratio of hub radius to tip radius of 0.52, in conjunction with a conical inlet having a 25 deg semi-vertex cone angle, at a Mach number of 2.1 over an angle-of-attack range of 0 deg to 8 deg. A simplified analysis showing that a supersonic, freely rotating rotor with maximum solidity for noninterference between blades will operate in an undistorted flow with a total-pressure defect of 1 percent or less was experimentally verified. Overall total-pressure distortions of 0.1 to 0.4 and Mach number distortions of 0.4 to 1.4, obtained at 4 deg to 8 deg angle of attack, were reduced about 30 percent and 23 percent, respectively, because of the presence of the rotor, with no measurable total-pressure loss. The rotor increased the peak total-pressure recovery at the simulated combustion chamber 1 1/2 and 3 1/2 percent at 6 deg and 8 deg angles of attack, respectively. This increase is attributed to lower diffusion duct losses as a consequence of a more uniform flow created by the rotor.

Goldberg, Theodore J.↗

Correlation between dynamic slowing down and local icosahedral ordering in undercooled liquid Al{sub 80}Ni{sub 20} alloy

We use ab initio molecular dynamics simulations to study the correlation between the local ordering and the dynamic properties of liquid Al{sub 80}Ni{sub 20} alloy upon cooling. Our results evidence a huge increase of local icosahedral ordering (ISRO) in the undercooled regime which is more developed around Ni than Al atoms. We show that ISRO has a strong impact on self-diffusion coefficients of both species and is at the origin of their crossover from Arrhenius to non-Arrhenius behavior around a crossover temperature T{sub X} = 1000 K, located in the undercooled region. We also clearly identify that this temperature corresponds to the development of dynamic heterogeneities and to the breakdown of the Stokes-Einstein relation. At temperatures below this crossover, we find that the behavior of the diffusion and relaxation dynamics is mostly incompatible with predictions of the mode-coupling theory. Finally, an analysis of the van Hove function indicates that the crossover temperature T{sub X} marks the onset of a change in the diffusion mechanism from a normal flow to an activated process with hopping. From these results, the glass-forming ability of the alloy is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ZONAL FLOWS AND LONG-LIVED AXISYMMETRIC PRESSURE BUMPS IN MAGNETOROTATIONAL TURBULENCE

We study the behavior of magnetorotational turbulence in shearing box simulations with a radial and azimuthal extent up to 10 scale heights. Maxwell and Reynolds stresses are found to increase by more than a factor of 2 when increasing the box size beyond two scale heights in the radial direction. Further increase of the box size has little or no effect on the statistical properties of the turbulence. An inverse cascade excites magnetic field structures at the largest scales of the box. The corresponding 10% variation in the Maxwell stress launches a zonal flow of alternating sub- and super-Keplerian velocity. This, in turn, generates a banded density structure in geostrophic balance between pressure and Coriolis forces. We present a simplified model for the appearance of zonal flows, in which stochastic forcing by the magnetic tension on short timescales creates zonal flow structures with lifetimes of several tens of orbits. We experiment with various improved shearing box algorithms to reduce the numerical diffusivity introduced by the supersonic shear flow. While a standard finite difference advection scheme shows signs of a suppression of turbulent activity near the edges of the box, this problem is eliminated by a new method where the Keplerian shear advection is advanced in time by interpolation in Fourier space.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stellar convection. III - Convection at large Rayleigh numbers

The results of a numerical, three-dimensional study of convection in a self-gravitating sphere of Boussinesq fluid with a Rayleigh number of 10-billion and a Prandtl number of 1 are presented. The velocity and temperature are computed by using spectral methods in the horizontal and finite-differencing in the radial directions. An eddy viscosity and diffusivity are needed to model the subresolution flow. For Rayleigh numbers much less than 10-billion the flows do not have well-defined inertial ranges, and an eddy viscosity and diffusivity cannot be assigned in this self-consistent manner. By computing the energy spectra as well as the detailed energy budgets as a function of wavenumber, it is shown that for Rs = 10-billion there is an inertial range for the modes corresponding to spherical harmonics with l greater than 6.

Marcus, P. S.↗

Experimental Investigation of Diffuser Hub Injection to Improve Centrifugal Compressor Stability

Results from a series of experiments to investigate whether centrifugal compressor stability could be improved by injecting air through the diffuser hub surface are reported. The research was conducted in a 4:1 pressure ratio centrifugal compressor configured with a vane-island diffuser. Injector nozzles were located just upstream of the leading edge of the diffuser vanes. Nozzle orientations were set to produce injected streams angled at 8, 0 and +8 degrees relative to the vane mean camber line. Several injection flow rates were tested using both an external air supply and recirculation from the diffuser exit. Compressor flow range did not improve at any injection flow rate that was tested. Compressor flow range did improve slightly at zero injection due to the flow resistance created by injector openings on the hub surface. Leading edge loading and semi-vaneless space diffusion showed trends similar to those reported earlier from shroud surface experiments that did improve compressor flow range. Opposite trends are seen for hub injection cases where compressor flow range decreased. The hub injection data further explain the range improvement provided by shroud-side injection and suggest that different hub-side techniques may produce range improvement in centrifugal compressors.

Skoch, Gary J.↗

Surface diffusion in reversed-phase liquid chromatography

More than 40 years ago, Giddings pointed out in 'Dynamics of Chromatography' that surface diffusion should become an important research topic in the kinetics of chromatographic phenomena. However, few studies on surface diffusion in adsorbents used in chromatography were published since then. Most scientists use ordinary rate equations to study mass transfer kinetics in chromatography. They take no account of surface diffusion and overlook the significant contributions of this mass transfer process to chromatographic behavior and to column efficiency at high mobile phase flow rate. Only recently did the significance of surface diffusion in separation processes begin to be recognized in connection with the development of new techniques of fast flow, high efficiency chromatography. In this review, we revisit the reports on experimental data on surface diffusion and introduce a surface-restricted molecular diffusion model, derived as a first approximation for the mechanism of surface diffusion, on the basis of the absolute rate theory. We also explain how this model accounts for many intrinsic characteristics of surface diffusion that cannot properly be explained by the conventional models of surface diffusion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Radiant Extinction Of Gaseous Diffusion Flames

The absence of buoyancy-induced flows in microgravity (mu:g) and the resulting increase in the reactant residence time significantly alters the fundamentals of many combustion processes. Substantial differences between normal gravity (ng) and :g flames have been reported in experiments on candle flames [1, 2], flame spread over solids [3, 4], droplet combustion [5,6], and others. These differences are more basic than just in the visible flame shape. Longer residence times and higher concentration of combustion products in the flame zone create a thermochemical environment that changes the flame chemistry and the heat and mass transfer processes. Processes such as flame radiation, that are often ignored in ng, become very important and sometimes even controlling. Furthermore, microgravity conditions considerably enhance flame radiation by: (i) the build-up of combustion products in the high-temperature reaction zone which increases the gas radiation, and (ii) longer residence times make conditions appropriate for substantial amounts of soot to form which is also responsible for radiative heat loss. Thus, it is anticipated that radiative heat loss may eventually extinguish the Aweak@ (low burning rate per unit flame area) :g diffusion flame. Yet, space shuttle experiments on candle flames show that in an infinite ambient atmosphere, the hemispherical candle flame in :g will burn indefinitely [1]. This may be because of the coupling between the fuel production rate and the flame via the heat-feedback mechanism for candle flames, flames over solids and fuel droplet flames. Thus, to focus only on the gas-phase phenomena leading to radiative extinction, aerodynamically stabilized gaseous diffusion flames are examined. This enables independent control of the fuel flow rate to help identify conditions under which radiative extinction occurs. Also, spherical geometry is chosen for the :g experiments and modeling because: (i) It reduces the complexity by making the problem one-dimensional. (ii) The spherical diffusion flame completely encloses the soot which is formed on the fuel rich side of the reaction zone. This increases the importance of flame radiation because now both soot and gaseous combustion products co-exist inside the high temperature spherical diffusion flame. (iii) For small fuel injection velocities, as is usually the case for a pyrolyzing solid, the diffusion flame in :g around the solid naturally develops spherical symmetry. Thus, spherical diffusion flames are of interest to fires in :g and identifying conditions that lead to radiation-induced extinction is important for spacecraft fire safety.

Berhan, S.↗

Synthetic Jet Interaction With A Turbulent Boundary Layer Flow

Perhaps one of the more notable advances to have occurred in flow control technology in the last fifteen years is the application of surface-issuing jets for separation control on aerodynamic surfaces. The concept was introduced by Johnston and Night (1990) who proposed using circular jets, skewed and inclined to the wall, to generate streamwise vortices for the purpose of mitigating boundary layer separation. The skew and inclination angles have subsequently been shown to affect the strength and sign of the ensuing vortices. With a non-circular orifice, in addition to skew and inclination, the yaw angle of the major axis of the orifice can influence the flow control effectiveness of the jet. In particular, a study by Chang arid Collins (1997) revealed that a non-circular orifice, yawed relative to the freestream, can be used to control the size and strength of the vortices produced by the control jet. This early work used jets with only a steady injection of mass. Seifert et al. revealed that an unsteady blowing jet, could be as effective at separation control as a steady jet but with less mass flow. Seifert et al. showed that small amplitude blowing oscillations superimposed on a low momentum steady jet Was the most effective approach to delaying separation on a NACA 0015 airfoil at post-stall angles of attack. More recent work suggests that perhaps the most efficient jet control effect comes from a synthetic (oscillatory) jet where the time-averaged mass flux through the orifice is zero, but the net wall normal momentum is non-zero. The control effectiveness of synthetic jets has been demonstrated for several internal and external flow fields used synthetic jet control on a thick, blunt-nosed airfoil to delay stall well beyond the stall angles for the uncontrolled airfoil and with a dramatic increase in the lift-to-drag performance. Amitay et al. used an array of synthetic jets to mitigate flow separation in curved and diffusing ducts. While the control effectiveness of synthetic jet actuators in an application setting has been confirmed through a number of studies, the fluid dynamic mechanism by which control is effected is not well understood. Issues like yaw angle arid velocity ratio that have been studied for steady control jets have not been investigated for synthetic jets. Moreover, the role played by the inherently unsteady nature of a synthetic jet in the interaction with the controlled flow is not known. Some recent work by Rinehart and Glazer and Smith suggests that away from tile immediate vicinity of the jet orifice the flow field is steady in the mean, and that the interaction of a synthetic jet and a boundary layer creates a secondary flow in the boundary layer consisting primarily of streamwise vortices.

Smith, Douglas R.↗