Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffusion bonding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

CO 2 -Induced displacement and diffusive transport of shale geofluids in silica nanopores of varying sizes

The need to recover our energy resources in a sustainable manner necessitates the development of technological approaches to reduce water use and enhance the use and storage of alternative processing fluids such as CO 2 . These societal and technological needs require a fundamental understanding of the pore-scale organization and transport behaviors of confined fluids. Therefore, the aim of this study is to establish a molecular-scale basis for evaluating CO 2 -induced selective adsorption and diffusive transport behavior of hydrocarbon fluids such as propane and toluene in silica nanopores with sizes in the range of 2–10 nm. The studied fluids are composed of CO 2 -propane, CO 2 -propane-toluene, and CO 2 -toluene. CO 2 was found to adsorb preferentially to the silica surfaces by forming hydrogen bonds with the surface hydroxyl (–OH) groups. The selective adsorption of CO 2 over propane was significantly higher compared to toluene at the pore sizes in the range of 2–10 nm. Increasing pore size reduces the extent of CO 2 , propane and toluene adsorbed on the silica surfaces while the corresponding diffusivities increased. Anisotropic diffusivities of the confined molecules were noted. More polar and higher molecular weight constituents of the oil such as toluene diffuse more slowly in confinement. These studies provide detailed scientific insights into the role of CO 2 in enhancing hydrocarbon recovery from unconventional and complex porous environments. These molecular-scale investigations suggest that CO 2 has a higher tendency to displace lighter aliphatic hydrocarbon molecules such as propane away from the surface as opposed to heavier hydrocarbon molecules such as toluene.

42 ENGINEERING↗

Mechanochemical synthesis of hydraulically reactive calcium silicate minerals via thermally-assisted mechanical grinding

This study explores a thermally assisted mechanochemical approach alternative to conventional cement synthesis as a potential to produce hydraulically reactive calcium silicate phases. Ball milling of mixed CaO/SiO 2 feedstocks at temperature ranges 100-300 °C increases the formation of the Ca-O-Si bonds and precursor reactivity. Spectroscopic analyses (FTIR, MAS-NMR, UV-Vis DRS) indicate increasing amorphization with milling temperature, attributed to improved mixing and thermally assisted diffusion. Upon hydration, all treated samples exhibit exothermic heat release, with the sample prepared at 300 °C showing the most pronounced reactivity. Thermal analysis reveals weight loss consistent with C-S-H formation, confirming cement-like behavior. In summary, moderate thermal input during milling promotes structural activation and enhances downstream hydraulic reactivity, providing a proof-of-concept for energy-reduced cement precursor processing.

Alite↗

Enabling hydrogen chemisorption on charged graphene

Two-dimensional (2D) materials, including graphitic derivatives, have long been of interest for hydrogen storage applications, due to their high theoretical storage capacity, low weight, and other useful properties. However, poor kinetics for hydrogen adsorption and surface diffusion as part of the proposed spillover process for hydrogenation have limited their technological potential. Here, we use first-principles calculations to study electronic doping as a means to improve hydrogen chemisorption on graphene, which we use here as a proxy for graphitic derivatives more broadly. We find that positively charged graphene sheets have vastly improved kinetics for hydrogen diffusion and adsorption, while they limit unwanted hydrogen desorption. This combination of effects should favor hydrogen chemisorption via spillover. We connect these trends to the C–H bond, which introduces states near the Fermi level. These states are depopulated as electrons are removed, thereby lowering the bond energy and permitting more facile movement of hydrogen. Our results suggest that spillover mechanisms for hydrogen chemisorption should be revisited if strategies to apply a large charge to graphitic systems can be realized. Moreover, switchable application of the charge may lead to the reversible chemisorption of hydrogen. While the large magnitude of charging required suggests that graphene itself may not be suitable for reversible hydrogen chemisorption, the factors we identify and discuss could significantly boost the prospects of graphitic derivatives and other 2D or layered materials for hydrogen storage applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature dependence of nuclear quantum effects on liquid water via artificial neural network model based on SCAN meta-GGA functional

We investigate the temperature dependence of nuclear quantum effects (NQEs) on structural and dynamic properties of liquid water by training a neural network force field using first-principles molecular dynamics (FPMD) based on the strongly constrained and appropriately normed meta-generalized gradient approximation exchange-correlation approximation. The FPMD simulation based on density functional theory has become a powerful computational approach for studying a wide range of condensed phase systems. However, its large computational cost makes it difficult to incorporate NQEs in the simulation and investigate temperature dependence of various properties. To circumvent this difficulty, we use an artificial neural network model and employ the thermostatted ring polymer MD approach for studying the temperature dependence of NQEs on various properties. The NQEs generally bring the radial distribution functions closer to the experimental measurements. Translational diffusivity and rotational dynamics of water molecules are both slowed down by the NQEs. The competing inter-molecular and intra-molecular quantum effects on hydrogen bonds, as discussed by Habershon, Markland, and Manolopoulos [J. Chem. Phys. 131(2), 024501 (2019)], can explain the observed temperature dependence of the NQEs on the dynamical properties in our simulation.

Yao, Yi (ORCID:0000000299576979)↗

Modeling Coupled Chemo-Mechanical Behavior of Randomly Oriented NMC811 Polycrystalline Li-Ion Battery Cathodes

This paper develops a three-dimensional, transient, chemo-mechanical model that predicts the performance of single secondary particle Li-ion battery cathodes. The secondary particles are composed of numerous (approximately 60) randomly oriented single-crystal primary particles. The model incorporates concentration-dependent and anisotropic material properties. As much as possible, electrochemical, transport, and structural properties for crystalline NMC811 (Li x Ni 0.8 Mn 0.1 Co 0.1 O 2 ) are taken from prior publications. Weak Van der Waals bonding between primary particles is modeled empirically using a spring analogy, which enables local primary-particle separations (disintegration) and subsequent reattachments. The model fully couples Li diffusion and the mechanical response. Results include predictions of local Li-concentrations and stresses. High stresses are found near grain boundaries, especially when the lattice orientations are greatly misaligned. Particle separations are characterized in terms of a damage parameter. The model is used to predict the effects of design and operating conditions, including charge/discharge rates, cycling scenarios, and particle sizes.

25 ENERGY STORAGE↗

Formation and Combustion of Smoke in Laminar Flames

The nature and formation of smoke and its combustion were investigated. Smoke, which consist of tiny mesomorphous crystals tightly packed into popcorn-ball-like particles that agglomerate to give filaments, was found to contain about 5 percent of the hydrogen originally present in the fuel. Factors affecting smoke formation were studied in both diffusion flames and premixed Bunsen flames. It is suggested that smoking tendency increases with increasing stability of the carbon skeleton of the molecule, as determined by relative bond strength.

Schalla, Rose L↗

High temperature barrier coatings for refractory metals

Improvements in high temperature oxidation resistant metal coating technology will allow NASA and commercial entities to develop competitive civil space transport and communication systems. The success of investigations completed in this program will have a positive impact on broadening the technology base for high temperature materials. The work reported herein describes processes and procedures for successfully depositing coherent oxidation barrier coatings on refractory metals to prevent degradation under very severe operating environments. Application of the new technology developed is now being utilized in numerous Phase 3 applications through several prominent aerospace firms. Major achievements have included: (1) development of means to deposit thick platinum and rhodium coatings with lower stress and fewer microcracks than could be previously achieved; (2) development of processes to deposit thick adherent coatings of platinum group metals on refractory substrates that remain bonded through high temperature excursions and without need for intermediate coatings (bonding processes unique to specific refractory metals and alloys have been defined; (3) demonstration that useful alloys of refractory and platinum coatings can be made through thermal diffusion means; (4) demonstration that selected barrier coatings on refractory substrates can withstand severe oxidizing environments in the range of 1260 deg and 1760 deg C for long time periods essential to the life requirements of the hardware; and (5) successful application of the processes and procedures to prototype hardware. The results of these studies have been instrumental in improved thermal oxidation barrier coatings for the NASP propulsion system. Other Phase 3 applications currently being exploited include small uncooled thrusters for spacecraft and microsatellite maneuvering systems.

Malone, G. A.↗

Flame Spray Strain Gages with Improved Durability and Lifetimes

The focus of this APP research program was to improve the bond coats used in the fabrication of flame sprayed instrumentation. Typically. a bond coat is applied to a superalloy surface prior to the application of a thin dielectric coating onto which instrumentation is placed. After affixing the instrumentation, a much thicker ceramic topcoat is typically applied to protect the instrumentation from harsh environments. The fatigue life of NiCoCrAlY coated superalloys was extended beyond current state-of-the-art by relatively simple and cost effective means. Heat treatment in reduced oxygen partial pressures at 1750 to 1800 F effectively doubled the fatigue life of NiCoCrAlY coated substrates relative to as-sprayed substrates and when used in conjunction with platinum diffusion barriers yielded a four fold increase in the fatigue life of NiCoCrAlY coated substrates. Further improvements in the fatigue life of thermally sprayed coatings were made by employing intermediate coatings, which minimized thermal expansion differences between the bond coat and top coat. Combinatorial chemistry experiments yielded an optimum composition for an intermediate TCE matching coating that showed considerable promise in extending the fatigue life of thermal spray instrumentation. The intermediate coating had two functions: to reduce the surface roughness of the peaks and valleys associated with the as-sprayed NiCoCrAlY bond coat, and to produce a thin layer of a mixture of Al2O3 and NiCoCrAlY that exhibited an intermediate TCE. The optimal composition of the intermediate coating consisted of 60 wt% Al2O3 and 40 wt% NiCoCrAlY, as determined by energy dispersive analysis of x-rays (EDS). Intermediate coatings having this composition were prepared by physical vapor deposition and the resulting coating systems are being evaluated in our test facility.

Fralick, Gustave↗

Molecular hydrogen solvated in water – A computational study

The aqueous hydrogen molecule is studied with molecular dynamics simulations at ambient temperature and pressure conditions, using a newly developed flexible and polarizable H{sub 2} molecule model. The design and implementation of this model, compatible with an existing flexible and polarizable force field for water, is presented in detail. The structure of the hydration layer suggests that first-shell water molecules accommodate the H{sub 2} molecule without major structural distortions and two-dimensional, radial-angular distribution functions indicate that as opposed to strictly tangential, the orientation of these water molecules is such that the solute is solvated with one of the free electron pairs of H{sub 2}O. The calculated self-diffusion coefficient of H{sub 2}(aq) agrees very well with experimental results and the time dependence of mean square displacement suggests the presence of caging on a time scale corresponding to hydrogen bond network vibrations in liquid water. Orientational correlation function of H{sub 2} experiences an extremely short-scale decay, making the H{sub 2}–H{sub 2}O interaction potential essentially isotropic by virtue of rotational averaging. The inclusion of explicit polarizability in the model allows for the calculation of Raman spectra that agree very well with available experimental data on H{sub 2}(aq) under differing pressure conditions, including accurate reproduction of the experimentally noted trends with solute pressure or concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NO 2 oxidation reactivity and burning mode of diesel particulates

The NO 2 oxidation kinetics and burning mode for diesel particulate from light-duty and medium-duty engines fueled with either ultra low sulfur diesel or soy methyl ester biodiesel blends have been investigated and are shown to be significantly different from oxidation by O 2 . Oxidation kinetics were measured using a flow-through packed bed microreactor for temperature programmed reactions and isothermal differential pulsed oxidation reactions. The burning mode was evaluated using the same reactor system for flowing BET specific surface area measurements and HR-TEM with fringe analysis to evaluate the nanostructure of the nascent and partially oxidized particulates. The low activation energy measured, specific surface area progression with extent of oxidation, HR-TEM images and difference plots of fringe length and tortuosity paint a consistent picture of higher reactivity for NO 2 , which reacts indiscriminately immediately upon contact with the surface, leading to the Zone I or shrinking core type oxidation. In comparison, O 2 oxidation is shown to have relatively lower reactivity, preferentially attacking highly curved lamella, which are more reactive due to bond strain, and short lamella, which have a higher proportion of more reactive edge sites. Furthermore, this preferential oxidation leads to Zone II type oxidation, where solid phase diffusion of oxygen via pores contributes significantly to slowing the overall oxidation rate, by comparison.

33 ADVANCED PROPULSION SYSTEMS↗

Modeling material interfaces with hybrid adhesion method

A molecular dynamics simulation approach is presented to approximate layered material structures using discrete interatomic potentials through classical mechanics and the underlying principles of quantum mechanics. This method isolates the energetic contributions of the system into two pure material layers and an interfacial region used to simulate the adhesive properties of the diffused interface. The strength relationship of the adhesion contribution is calculated through small-scale separation calculations and applied to the molecular surfaces through an inter-layer bond criterion. By segregating the contributions into three regions and accounting for the interfacial excess energies through the adhesive surface bonds, it is possible to model each material with an independent potential while maintaining an acceptable level of accuracy in the calculation of mechanical properties. This method is intended for the atomistic study of the delamination mechanics, typically observed in thin-film applications. Therefore, the work presented in this paper focuses on mechanical tensile behaviors, with observations in the elastic modulus and the delamination failure mode. To introduce the hybrid adhesion method, we apply the approach to an ideal bulk copper sample, where an interface is created by disassociating the force potential in the middle of the structure. Various mechanical behaviors are compared to a standard EAM control model to demonstrate the adequacy of this approach in a simple setting. In addition, we demonstrate the robustness of this approach by applying it on (1) a Cu-Cu 2 O interface with interactions between two atom types, and (2) an Al-Cu interface with two dissimilar FCC lattices. These additional examples are verified against EAM and COMB control models to demonstrate the accurate simulation of failure through delamination, and the formation and propagation of dislocations under loads. Finally, the results conclude that by modeling the energy contributions of an interface using hybrid adhesion bonds, we can provide an accurate approximation method for studies of large-scale mechanical properties, as well as the representation of various delamination phenomena at the atomic scale.

36 MATERIALS SCIENCE↗

Removal of deuterium retained in boron powder by oxygen or high-temperature bakeout

Fuel retention in dust accumulated in fusion devices is a potential operational hazard. Boronization is one of the leading wall-conditioning candidates for future fusion devices. Fuel retention characteristics of boron dust must be studied to accurately understand the potential hazards of boron dust in fusion devices. We evaluated the retention of deuterium (D) in commercially available boron powder as a proxy for tritium retention in boron dust. Diffuse reflectance infrared Fourier transform spectroscopy revealed that boron powder between 300 and 500 K exposed to neutral hydrogen (H 2 ) gas retains H via B-H bonding. We utilized D 2 exposures of 17,400 L on the boron powder, which led to retention on the order of 0.5 g D per 100 kg B or 1.2 g D per m 2 B, as estimated from temperature programmed desorption measurements. We evaluated how powder bakeouts under ultra-high vacuum (UHV), or in an oxygen (O 2 ) or H 2 gas backfilled environment can remove the retained fuel. Bakeouts below 523 K under UHV exhibited poor D removal, promoting recapture of D 2 present as background gas in the chamber. Higher temperature bakeouts led to the removal of over 80% of the retained D within 3 days (623 K) or 1 h (723 K). Bakeouts at 423 K under an O 2 gas environment removed ∼150% more retained D from the boron powder, when compared to bakeouts conducted under UHV. These results suggest that efficient fuel removal from boron dust can be achieved by high-temperature bakeout (>623 K) or by bakeouts at lower temperature (423 K) under an O 2 environment.

Bakeout↗

Nanosecond X-ray diffraction of shock-compressed superionic water ice

Since Bridgman’s discovery of five solid water (H 2 O) ice phases in 1912, studies on the extraordinary polymorphism of H 2 O have documented more than seventeen crystalline and several amorphous ice structures, as well as rich metastability and kinetic effects. Here, this unique behaviour is due in part to the geometrical frustration of the weak intermolecular hydrogen bonds and the sizeable quantum motion of the light hydrogen ions (protons). Particularly intriguing is the prediction that H 2 O becomes superionic—with liquid-like protons diffusing through the solid lattice of oxygen—when subjected to extreme pressures exceeding 100 gigapascals and high temperatures above 2,000 kelvin.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Communication: Improved ab initio molecular dynamics by minimally biasing with experimental data

Accounting for electrons and nuclei simultaneously is a powerful capability of ab initio molecular dynamics (AIMD). However, AIMD is often unable to accurately reproduce properties of systems such as water due to inaccuracies in the underlying electronic density functionals. This shortcoming is often addressed by added empirical corrections and/or increasing the simulation temperature. We present here a maximum-entropy approach to directly incorporate limited experimental data via a minimal bias. Biased AIMD simulations of water and an excess proton in water are shown to give significantly improved properties both for observables which were biased to match experimental data and for unbiased observables. Here, this approach also yields new physical insight into inaccuracies in the underlying density functional theory as utilized in the unbiased AIMD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

3D Modeling of Ultrasonic Wave Interaction with Disbonds and Weak Bonds

Ultrasonic techniques, such as the use of guided waves, can be ideal for finding damage in the plate and pipe-like structures used in aerospace applications. However, the interaction of waves with real flaw types and geometries can lead to experimental signals that are difficult to interpret. 3-dimensional (3D) elastic wave simulations can be a powerful tool in understanding the complicated wave scattering involved in flaw detection and for optimizing experimental techniques. We have developed and implemented parallel 3D elastodynamic finite integration technique (3D EFIT) code to investigate Lamb wave scattering from realistic flaws. This paper discusses simulation results for an aluminum-aluminum diffusion disbond and an aluminum-epoxy disbond and compares results from the disbond case to the common artificial flaw type of a flat-bottom hole. The paper also discusses the potential for extending the 3D EFIT equations to incorporate physics-based weak bond models for simulating wave scattering from weak adhesive bonds.

Leckey, C.↗

Diffusion of oxygen in amorphous Al{sub 2}O{sub 3}, Ta{sub 2}O{sub 5}, and Nb{sub 2}O{sub 5}

The self-diffusivity of oxygen in amorphous Al{sub 2}O{sub 3} (a-Al{sub 2}O{sub 3}), a-Ta{sub 2}O{sub 5}, and a-Nb{sub 2}O{sub 5} was investigated along with structural analysis in terms of pair distribution function (PDF). The low activation energy, ∼1.2 eV, for diffusion in the oxides suggests a single atomic jump of oxygen ions mediated via vacancy-like defects. However, the pre-exponential factor for a-Ta{sub 2}O{sub 5} and a-Nb{sub 2}O{sub 5} with lower bond energy was two orders of magnitude larger than that for a-Al{sub 2}O{sub 3} with higher bond energy. PDF analyses revealed that the short-range configuration in a-Ta{sub 2}O{sub 5} and a-Nb{sub 2}O{sub 5} was more broadly distributed than that in a-Al{sub 2}O{sub 3}. Due to the larger variety of atomic configurations of a-Ta{sub 2}O{sub 5} and a-Nb{sub 2}O{sub 5}, these oxides have a higher activation entropy for diffusion than a-Al{sub 2}O{sub 3}. The entropy term for diffusion associated with short-range structures was shown to be a dominant factor for diffusion in amorphous oxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

X-ray photoelectron (XPS) and Diffuse Reflectance Infra Fourier Transformation (DRIFT) study of Ba{sub 0.5}Sr{sub 0.5}Co{sub x}Fe{sub 1-x}O{sub 3-{delta}} (BSCF: x=0-0.8) ceramics

The X-ray photoelectron spectra (XPS) of sintered BSCF ceramics (Ba{sub 0.5}Sr{sub 0.5}Co{sub x}Fe{sub 1-x}O{sub 3-{delta}},0{<=}x{<=}0.8) were measured at room temperature (RT). Peak areas of Fe{sub 2p1}, Fe{sub 2p3}, Fe{sub 3p} and Co{sub 3p} increased systematically with increasing cobalt concentration, while their binding energies (BEs) remained the same (723.3, 710.0, 55.0 and 60.9 eV, respectively). However, the BEs of lattice oxygen in O{sub 1s} (528.1 eV) and Ba{sub 4d} for the BaO bond (87.9V and 90.2 eV) increased with increasing cobalt concentration. The shoulder peak of Ba{sub 3d}/Co{sub 2p} increased from 778.0 to 778.7 eV, which implies that this peak can be attributed to another Ba XPS peak (described as Ba{sub 2nd} in this study) due to the overlapping area between barium cations and oxygen anions. The overall peak areas of Ba{sub 4d} increased up to x=0.4, and then decreased, which coincides with the behavior of the Diffuse Reflectance Infrared Fourier Transform (DRIFT) bands representing adsorbed CO{sub 3}{sup 2-} ({nu}CO{sub 3}{sup 2-}) and structurally bonded CO{sub 3}{sup 2-} ({nu}{sub 2}, {nu}{sub 3}) (800-1200 and 862/1433 cm{sup -1}, respectively). - Graphical abstract: The bonding of CO{sub 3}{sup 2-} to the surface of BSCF perovskite and the bonding state between cations vs. oxygen have been suggested. Highlights: > XPS and DRIFT were measured on BSCF (BSCF: x=0-0.8) samples. > The identity of Ba{sub 3d}/Co{sub 2p} XPS shoulder peak at {approx}778.0 was suggested. > The bonding behavior of CO{sub 3}{sup 2-} to the BSCF prevoskite structure was studied substantially.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

From Salt in Solution to Solely Ions: Solvation of Methyl Viologen in Deep Eutectic Solvents and Ionic Liquids

Solvation and transport properties of methlyviologen dichloride in mixtures of choline chloride (ChCl) and ethylene glycol (EG) including the deep eutectic solvent (DES) ethaline were studied through physical property measurements, cyclic voltammetry, and Raman spectroscopy. The transport properties of the solvate structures in ethaline and ChCl:EG mixtures were compared to a well-studied ionic liquid (IL), 1-methyl-1-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide, [PYR 13 ][TFSI] through the lens of hole theory. Here by exchanging the chloride anion of ethaline with bis(trifuoromethylsufonyl)imide) anion, [TFSI], is found to increase the fluidity of the solvent and promoted stronger solute-solvent interactions. Raman spectroscopy shows that methylviologen is solvated by EG in solutions with ChTFSI but interstitially accommodated in void spaces in both ChCl solutions and [PYR 13 ][TFSI]. Here, complex solvents such as DESs are regarded as “designer solvents” and we demonstrate that the physical properties and solvation characteristics of these fluids can be varied by anion exchange of hydrogen bond acceptors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗