Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distributed temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Grain temperature fluctuations - A key to infrared spectra

Interstellar grains of radius less than 003 microns are known to have a fluctuating temperature because their internal energy is comparable to the energy of UV and visible photons. The exact resultant grain temperature distribution is given by studying the multiphoton absorption processes. This distribution satisfies an homogeneous integral equation which can be solved by an iteration technique. These small grains generally emit at shorter wavelengths than big cold grians and therefore could help in the interpretation of the infrared spectra (1-1000 microns) of various astrophysical objects.

Desert, F. X.↗
NASA NTRS1987

Thermal Stresses in Silicon-Web Growth

Mathematical model represents thermomechanical behavior of solid web of rectangular cross section as pulled from melt of same material. Intended for application to growth of silicon webs or ribbons, model general enough to be applicable to other materials as well. Shows suitable temperature distribution results in stress-free ribbon. Conceptual ribbon of rectangular cross section pulled from melt. Simplified configuration used to calculate thermal conditions for stress-free ribbon.

Wade, Ben K.↗
NASA NTRS1987

Numerical Simulation Of Silicon-Ribbon Growth

Mathematical model includes nonlinear effects. In development simulates growth of silicon ribbon from melt. Takes account of entire temperature and stress history of ribbon. Numerical simulations performed with new model helps in search for temperature distribution, pulling speed, and other conditions favoring growth of wide, flat, relatively defect-free silicon ribbons for solar photovoltaic cells at economically attractive, high production rates. Also applicable to materials other than silicon.

Woda, Ben K.↗
NASA NTRS1986

Mathematical model for the Bridgman-Stockbarger crystal growing system

In a major technical breakthrough, a computer model for Bridgman-Stockbarger crystal growth was developed. The model includes melt convection, solute effects, thermal conduction in the ampule, melt, and crystal, and the determination of the curved moving crystal-melt interface. The key to the numerical method is the use of a nonuniform computational mesh which moves with the interface, so that the interface is a mesh surface. In addition, implicit methods are used for advection and diffusion of heat, concentration, and vorticity, for interface movement, and for internal gracity waves. This allows large time-steps without loss of stability or accuracy. Numerical results are presented for the interface shape, temperature distribution, and concentration distribution, in steady-state crystl growth. Solutions are presented for two test cases using water, with two different salts in solution. The two diffusivities differ by a factor of ten, and the concentrations differ by a factor of twenty.

Roberts, G. O.↗
NASA NTRS1986

Image restoration and superresolution as probes of small scale far-IR structure in star forming regions

Far-infrared continuum studies from the Kuiper Airborne Observatory are described that are designed to fully exploit the small-scale spatial information that this facility can provide. This work gives the clearest picture to data on the structure of galactic and extragalactic star forming regions in the far infrared. Work is presently being done with slit scans taken simultaneously at 50 and 100 microns, yielding one-dimensional data. Scans of sources in different directions have been used to get certain information on two dimensional structure. Planned work with linear arrays will allow us to generalize our techniques to two dimensional image restoration. For faint sources, spatial information at the diffraction limit of the telescope is obtained, while for brighter sources, nonlinear deconvolution techniques have allowed us to improve over the diffraction limit by as much as a factor of four. Information on the details of the color temperature distribution is derived as well. This is made possible by the accuracy with which the instrumental point-source profile (PSP) is determined at both wavelengths. While these two PSPs are different, data at different wavelengths can be compared by proper spatial filtering. Considerable effort has been devoted to implementing deconvolution algorithms. Nonlinear deconvolution methods offer the potential of superresolution -- that is, inference of power at spatial frequencies that exceed D lambda. This potential is made possible by the implicit assumption by the algorithm of positivity of the deconvolved data, a universally justifiable constraint for photon processes. We have tested two nonlinear deconvolution algorithms on our data; the Richardson-Lucy (R-L) method and the Maximum Entropy Method (MEM). The limits of image deconvolution techniques for achieving spatial resolution are addressed.

Lester, D. F.↗
NASA NTRS1986

Utilization of VAS satellite data in the initialization of an oceanic-cyclogenesis simulation

A series of experiments was performed to test various method of incorporating Visible Infrared Spin Scan Radiometer Atmospheric Sounder (VAS)-sounding data into the initial conditions of the Penn State University/National Center for Atmospheric mesoscale model. The VAS data for this ocean-cyclogenesis case consist of 110 irregularly distributed temperature and humidity soundings located over the North Pacific Ocean and apply at approximately 1200 GMT 10 November 1981. Various methods of utilizing VAS data in the initial condition of a mesoscale model were evaluated.

Douglas, Sharon G.↗
NASA NTRS1987

Further generalization of an equivalent plate representation for aircraft structural analysis

Recent developments from a continuing effort to provide an equivalent plate representation for aircraft structural analysis are described. Previous work provided an equivalent plate analysis formulation that is capable of modeling aircraft wing structures with a general planform such as cranked wing boxes. However, the modeling is restricted to representing wing boxes having symmetric cross sections. Further developments, which are described, allow modeling of wing cross sections having asymmetries that can arise from airfoil camber or from thicknesses being different in the upper and lower cover skins. An implementation of thermal loadings, which are described as temperature distributions over the planform of the cover skins, has been included. Spring supports have been added to provide for a more general set of boundary conditions. Numerical results are presented to assess the effect of wing camber on the static and dynamic response of an example wing structure under pressure and thermal loading. These results are compared with results from a finite element analysis program to indicate how well a cambered wing box can be represented with an equivalent plate formulation.

Giles, Gary L.↗
NASA NTRS1987

Numerical study of the effects of boundary conditions on the measurement and calibration of gardon type heat flux sensors

To monitor the high-intensity heat flux conditions that occur in the space shuttle main engine (SSME), it is necessary to use specifically designed heat flux sensors. These sensors, which are of the Gardon-type, are exposed on the measuring face to high-intensity radiative and convective heat fluxes and on the other face to convective cooling. To improve the calibration and measurement accuracy of these gauges, researchers are studing the effect that the thermal boundary conditions have on gauge performance. In particular, they are studying how convective cooling effects the field inside the sensor and the measured heat flux. The first phase of this study involves a numerical study of these effects. Subsequent phases will involve experimental verification. A computer model of the heat transfer around a Garden-type heat flux sensor was developed. Two specific geometries are being considered are: (1) heat flux sensor mounted on a flat-plate; and (2) heat flux sensor mounted at the stagnation point of a circular cylinder. Both of these configurations are representative of the use of heat flux sensors in the components of the SSME. The purpose of the analysis is to obtain a temperature distribution as a function of the boundary conditions.

Krane, M.↗
NASA NTRS1987

Langmuir probe surveys of an arcjet exhaust

Electrostatic (Langmuir) probes of both spherical and cylindrical geometry have been used to obtain electron number density and temperature in the exhaust of a laboratory arcjet. The arcjet thruster operated on nitrogen and hydrogen mixtures to simulate fully decomposed hydrazine in a vacuum environment with background pressures less than 0.05 Pa. The exhaust appears to be only slightly ionized (less than 1 percent) with local plasma potentials near facility ground. The current-voltage characteristics of the probes indicate a Maxwellian temperature distribution. Plume data are presented as a function of arcjet operating conditions and also position in the exhaust.

Zana, Lynnette M.↗
NASA NTRS1987

Thermocapillary bubble migration for large Marangoni Numbers

The thermocapillary motion of spherical bubbles present in an unbounded liquid with a linear temperature distribution, when the Reynolds number and the Marangoni number are large is analyzed. Previous calculations of the terminal velocity performed for this parametric range did not take into complete consideration the thermal boundary layer present near the surface of the bubble. A scaling analysis is presented for this problem. The thermal boundary layer is analyzed by an integral method. The resulting terminal velocity is lower than the one previously calculated, though it is of the same order of magnitude.

Balasubramaniam, R.↗
NASA NTRS1987

Solid sulfur in vacuum: Sublimation effects on surface microtexture, color and spectral reflectance, and applications to planetary surfaces

A form of sulfur that is white at room temperature and very fluffy in texture has been found in laboratory experiments on the effects of vacuum sublimation (evaporation) on solid sulfur. This work is an outgrowth of proton sputtering experiments on sulfur directed toward understanding Jovian magnetospheric effects on the surface of Io. Fluffy white sulfur is formed on the surface of solid yellow, tan, or brown sulfur melt freezes in vacuum by differential (fractional) evaporation of two or more sulfur molecular species present in the original sulfur; S(8) ring sulfur is thought to be the dominant sublimination phase lost to the vacuum sink, and polymeric chain sulfur S(u) the dominant residual phase that remains in place, forming the residual fluffy surface layer. The reflectance spectrum of the original sulfur surface is greaty modified by formation of the fluffy layer: the blue absorption band-edge and shoulder move 0.05 to 0.06 microns toward shorter wavelengths resulting in a permanent increase in reflectivity near 0.42 to 0.46 microns; the UV reflectivity below 0.40 microns is reduced. This form of sulfur should exist in large quantity on the surface of Io, especially in hotspot regions if there is solid free sulfur there that has solidified from a melt. Its color and spectra will indicate relative crystallization age on a scale of days to months and/or surface temperature distribution history.

Nash, D. B.↗
NASA NTRS1987

Diffuse infrared emission of the galaxy: Large scale properties

A quantitative analysis of Infrared Astronomy Satellite (IRAS) data in the galactic plane shows that: about 66% of the power radiated in the 100 micron band comes from the diffuse medium, the other 33% coming from well identified luminous sources. The diffuse emission has almost constant colors throughout the Galaxy, similar to the local cirrus colors. The sources have a much lower 12 micron/25 micron and a much high 60 micron/100 micron emission ratio than the diffuse component, giving a very striking anticorrelation in the color-color diagrams. The separation between one narrow and a second broader component shows that the molecular component does not provide much more than one half of the diffuse emission in the molecular ring: this implies a 4 pi nuI(nu) emissivity at 100 microns for the atomic component of about 2.4 x 10 to the minus 30th watts per H atom, 10 times higher than the emissivity of the molecular component at the same galactocentric radius. The atomic component emissivity measures the interstellar radiation field density. The temperature distribution of the 2 components is discussed comparing IRAS data with measures of the 900 micron emission of the galactic plane, which appears to be dominated by cold dust in the narrow component.

Puget, J. L.↗
NASA NTRS1987

Survey of the galactic disk from 1 = -150 deg to 1 = 82 deg in the submillimeter range

The first almost complete survey of the galactic disk from 1 = -150 deg to 1 = 82 deg in the submillimeter range (effective wavelength = 380 microns), performed with the AGLAE balloon-borne instrument modified to include a submillimeter channel, is reported. The instrumentation and observational procedures are described, as are the signal processing and calibration. The results are presented as a profile of the submillimeter brightness of the galactic disk displayed as a function of the galactic longitude. This profile exhibits diffuse emission all along the disk with bright peaks associated with resolved sources. The averaged galactic spectrum is in agreement with a temperature distribution of the interstellar cold dust.

Caux, Emmanuel↗
NASA NTRS1986

Development of an emulation-simulation thermal control model for space station application

The orbiting space station being developed by NASA will have many thermal sources and sinks as well as requirements for the transport of thermal energy through large distances. The station is also expected to evolve over twenty or more years from an initial design. As the station evolves, thermal management will become more difficult. Thus, analysis techniques to evaluate the effects of changing various thermal loads and the methods utilized to control temperature distributions in the station are essential. Analysis techniques, including a user-friendly computer program, were developed which should prove useful to thermal designers and system analysts working on the space station. The program uses a data base and user input to compute costs, sizes, and power requirements for individual components and complete systems. User input consists of selecting mission parameters, selecting thermal acquisition configurations, transport systems and distances, and thermal rejection configurations. The capabilities of the program may be expanded by including additional thermal models as subroutines.

Hartley, James G.↗
NASA NTRS1985

Optimal cure cycle design for autoclave processing of thick composites laminates: A feasibility study

The thermal analysis and the calculation of thermal sensitivity of a cure cycle in autoclave processing of thick composite laminates were studied. A finite element program for the thermal analysis and design derivatives calculation for temperature distribution and the degree of cure was developed and verified. It was found that the direct differentiation was the best approach for the thermal design sensitivity analysis. In addition, the approach of the direct differentiation provided time histories of design derivatives which are of great value to the cure cycle designers. The approach of direct differentiation is to be used for further study, i.e., the optimal cycle design.

Hou, Jean W.↗
NASA NTRS1986

Thermal analysis of an orthotropic engineering body

This work is an effort in determining the temperature distribution of an orthotropic engineering body. First the governing partial differential equation is derived, then, a finite element procedure using variational approach is developed for the solution of the governing equation. Finally, a computer program provides a set of satisfactory results.

Fu, K.-C.↗
NASA NTRS1986

The temperature structure in accretion flows onto massive protostars

Radiation transfer problems involved in the infall of dust and gas during star formation are studied. Dust properties are discussed, and modifications of spherical radiative transfer equations are presented that permit forward scattering by dust to be treated for the small size of the star relative to the inner radius of the shell. A procedure for deriving the stellar radiation field incident on the inner edge of the shell is developed. The temperature correction procedure of Cassinelli and Hartmann (1975) for extended stellar atmospheres is modified so that the multitemperature nature of the grains in the cloud may be derived. Temperature distributions for three schematic models in which the density is prespecified are discussed. Radiative acceleration of grains is addressed, showing that the proper mean opacity differs by a large factor from the Rosseland mean opacity that is commonly used. Emergent fluxes for the models are given.

Wolfire, Mark G.↗
NASA NTRS1986

Initiation of breakdown in slender compressible vortices

The initiation of the breakdown process for axially symmetric compressible flows is investigated using a numerical solution of the conservation equations for mass, momentum, and energy. The vortex is isolated, with its axis parallel to the direction of the main stream, and the core radius is small compared to the breakdown length. Computations for several flowfields indicate that the breakdown of the solution is shifted further downstream with increasing Mach number until breakdown is no longer observed. In the subsonic case, the influence of the initial temperature distribution on the breakdown length of the solution is more pronounced than in the supersonic case, with heating of the core enhancing breakdown, and cooling delaying it. The breakdown of the solution is seen to always occur for nonvanishing axial velocity components.

Krause, E.↗