SEARCH · Search NASA

Results for “Estimation method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Design of infrasound-detection system via adaptive LMSTDE algorithm

A proposed solution to an aviation safety problem is based on passive detection of turbulent weather phenomena through their infrasonic emission. This thesis describes a system design that is adequate for detection and bearing evaluation of infrasounds. An array of four sensors, with the appropriate hardware, is used for the detection part. Bearing evaluation is based on estimates of time delays between sensor outputs. The generalized cross correlation (GCC), as the conventional time-delay estimation (TDE) method, is first reviewed. An adaptive TDE approach, using the least mean square (LMS) algorithm, is then discussed. A comparison between the two techniques is made and the advantages of the adaptive approach are listed. The behavior of the GCC, as a Roth processor, is examined for the anticipated signals. It is shown that the Roth processor has the desired effect of sharpening the peak of the correlation function. It is also shown that the LMSTDE technique is an equivalent implementation of the Roth processor in the time domain. A LMSTDE lead-lag model, with a variable stability coefficient and a convergence criterion, is designed.

Khalaf, C. S.↗

NASA NTRS1986

Use of SIR-A and Landsat MSS data in mapping shrub and intershrub vegetation at Koonamore, South Australia

Shrublands cover much of the interior of the Australian continent and support a large grazing industry. Distinguishing the woody perennial vegetation from the smaller herbaceous vegetation and soil-encrusting lichen found between the shrubs is critical for range management but is difficult to do using Landsat data alone. In this study Shuttle Imaging Radar-A (SIR-A) and Landsat data acquired over Koonamore Station are examined together. Given the low topography and fine textured soils at Koonamore, radar return should be primarily determined by the percent area occupied by shrubs. During periods when most of the vegetation was non-vigorous and spectrally homogeneous, SIR-A data, as a surrogate measure of shrub cover, allowed the reflectance due to shrubs in Landsat data to be separated from the reflectance due to the intervening ground. This method allows estimation of the intershrub reflectance properties that are related to herbaceous vegetation, lichen, and bare soil exposures.

Green, G. M.↗

NASA NTRS1986

A full CI treatment of Ne atom - A benchmark calculation performed on the NAS CRAY 2

Full CI calculations are performed for Ne atom using Gaussian basis sets of up to triple-zeta plus double polarization quality. The total valence correlation energy through double, triple, quadruple and octuple excitations is compared for eight different basis sets. These results are expected to be an important benchmark for calibrating methods for estimating the importance of higher excitations.

Bauschlicher, C. W., Jr.↗

NASA NTRS1987

Predicting Visible Range Of An Object

Report and supplementary materials present method for estimating maximum distance which Spartan free flyer seen by star trackers on Space Shuttle. Brightness, and visible range calculated by using simplified model of object as reflector, taking into consideration orientation of object and predicted relative positions of Shuttle and Sun.

King, Joseph C.↗

NASA NTRS1986

Conduction investigations into the magnetic properties of matter

The thermal analysis of a heat exchanger for heating air to temperatures on the order of 3000 C for use in NASA's high temperature wind tunnel is presented. It was ascertained that an externally finned shell-and-tube type of heat exchanger with counterflow could be considered for this application. The methods of estimating the convective heat transfer coefficients are outlined in this report. As a part of thermal design the required size of heat exchanger was predicted. As a result of the extreme length required (approx. = 1/2 km), it was determined that a conventional heat exchanger may not be the most suitable tool for this application.

Chagini, H.↗

NASA NTRS1986

Inversion of SAGE II measurements

Stratospheric aerosol data acquired by the seven channels of the SAGE II passive radiometer system are first converted to atmospheric slant path transmission (SPT) values before deriving inversion values. The sun-pointing configuration permits bypassing calibration equipment required by other instruments and also furnishes high resolution vertical profile data. The retrieval techniques for quantifying the amounts of aerosol, water vapor, NO2 and O3, the species to which the SAGE II sensors are tuned, are summarized, along with methods for estimating the uncertainty in the calculations.

Chu, W. P.↗

NASA NTRS1987

Engineering analysis of slender-body aerodynamics using Sychev similarity parameters

The similarity parameters deduced by Sychev for inviscid hypersonic flow over slender bodies are reviewed and used to correlate flowfield, surface-pressure, normal-force and center-of-pressure data for supersonic flow over thin slender wings and smooth slender bodies at low-to-high angles of attack. Although Sychev expected similarity to hold only for hypersonic freestream and cross flows, it is demonstrated empirically that similarity holds for any value of cross-flow Mach number if the axial flow component is supersonic. It is also shown for thin wings that similarity holds for much larger values of aspect ratio than Sychev supposed. A one-term power-law expression is found to fit all of the normal-force correlations which suggests that it may be possible to develop a simple semi-empirical method for estimating the aerodynamic characteristics of arbitrary slender airframes.

Hemsch, Michael J.↗

NASA NTRS1987

Oscillator strengths for S I, S II, and S III

A series of calculations for atomic data of various sulfur and oxygen ions is examined. Recent observations of the Io plasma torus obtained with the Voyager UV Spectrometer, the IUE satellite short wavelength spectrograph, and the rocket-borne faint object telescope are discussed. The calculation of oscillator strengths for S II, the P I sequence, S I, and S III in terms of configuration interaction effects is described. The derivation of orbital wave functions is considered. The use of the close coupling method to estimate collision strengths is studied. The accuracy of these calculations depends on: (1) the number of states used in the close coupling expansion; (2) resonance contributions to the thermally averaged collision strength; and (3) the quality of the target state wave functions. Tables of the derived oscillator strengths are presented.

Ho, Y. K.↗

NASA NTRS1987

Space station software reliability analysis based on failures observed during testing at the multisystem integration facility

Quality of software not only is vital to the successful operation of the space station, it is also an important factor in establishing testing requirements, time needed for software verification and integration as well as launching schedules for the space station. Defense of management decisions can be greatly strengthened by combining engineering judgments with statistical analysis. Unlike hardware, software has the characteristics of no wearout and costly redundancies, thus making traditional statistical analysis not suitable in evaluating reliability of software. A statistical model was developed to provide a representation of the number as well as types of failures occur during software testing and verification. From this model, quantitative measure of software reliability based on failure history during testing are derived. Criteria to terminate testing based on reliability objectives and methods to estimate the expected number of fixings required are also presented.

Tamayo, Tak Chai↗

NASA NTRS1987

Two-color method for optical astrometry - Theory and preliminary measurements with the Mark III stellar interferometer

The two-color method for interferometric astrometry provides a means of reducing the error in a stellar position measurement attributable to atmospheric turbulence. The primary limitation of the method is shown to be turbulent water vapor fluctuations. Secondary atmospheric effects caused by diffraction from small refractive-index inhomogeneities and differential refraction for the observation of stars away from zenith are shown to introduce errors that behave as white noise and which should not be significant. Other potential error sources due to photon noise, systematic instrumental effects, and imperfect data reduction are also considered. The improvement in accuracy possible with the two-color method is estimated as a factor of 5-10 over the corresponding one-color measurement. Some preliminary two-color measurements with the Mark III stellar interferometer at Mt. Wilson are presented, which demonstrate a factor of about 5 reduction in the amplitude of the atmospheric fluctuations in a stellar position measurement.

Colavita, M. Mark↗

NASA NTRS1986

Uncertainty of in-flight thrust determination

Methods for estimating the measurement error or uncertainty of in-flight thrust determination in aircraft employing conventional turbofan/turbojet engines are reviewed. While the term 'in-flight thrust determination' is used synonymously with 'in-flight thrust measurement', in-flight thrust is not directly measured but is determined or calculated using mathematical modeling relationships between in-flight thrust and various direct measurements of physical quantities. The in-flight thrust determination process incorporates both ground testing and flight testing. The present text is divided into the following categories: measurement uncertainty methodoogy and in-flight thrust measurent processes.

Abernethy, Robert B.↗

NASA NTRS1987

A five-level program for ions of astrophysical interest

An interactive FORTRAN program is presented which determines the physical conditions in a nebula given an appropriate emission-line intensity ratio, or the line emissivities given a density and temperature. A method for estimating ionic abundances based on the H-beta emissivity is also included. The relevant underlying physics is reviewed and a detailed description of the operation of the program given. Uncertainties in the interpretation of the results are discussed briefly.

De Robertis, M. M.↗

NASA NTRS1988

Outcomes of planetary close encounters - A systematic comparison of methodologies

Several methods for estimating the outcomes of close planetary encounters are compared on the basis of the numerical integration of a range of encounter types. An attempt is made to lay the foundation for the development of predictive rules concerning the encounter outcomes applicable to the refinement of the statistical mechanics that apply to planet-formation and similar problems concerning planetary swarms. Attention is given to Oepik's (1976) formulation of the two-body approximation, whose predicted motion differs from the correct three-body behavior.

Greenberg, Richard↗

NASA NTRS1988

Observations of comets and asteroids

All available ground-based observational techniques are used to study the chemical and physical properties of the small bodies of the solar system, primarily comets and secondarily asteroids. The ultimate goal is to use these bodies to understand the formation and evolution of the solar system. The analysis of charge coupled device (CCD) images of comet P/Halley continued. This included a mojor revision of a paper on the periodicities of CN jets in Halley showing that their periodicity is 7.3 days, not 2.2 days. It also included an analysis of the continuum images which showed that the dust in jets is much redder than in the ambient coma. Calculations with Mie theory suggest that the particles that show the strongest effects of radiation pressure. Much effort was expended devising methods to estimate the level of sky background of the many images in which comet extends to the edge of the chip. Examined images of comet Wilson were taken over many months in 1987. Wilson, a dynamically new comet, shows none of the short-term variability or jet structure (either dusty jets or jets of radicals seen in Halley. This is presumably due to the lack of a mantle or the nucleus. Median-imaging of sky was as a technique for removing residual flat-fielding errors in CCD images. A Monte Carlo model and a convolution model were developed for studying temporal variability of gaseous daughter products.

Ahearn, Michael F.↗

NASA NTRS1988

Planetary astronomy: Rings, satellites, and asteroids

Studies of planetary rings focus on the dynamical processes that govern astronomically observable ring properties and structure. These investigations thus help reveal properties of the rings as well as probe the gravity fields of the planets. Satellite studies involve interpretation of orbital motion to extract information regarding the gravity fields of the outer planets and the physical properties of the satellites themselves. Asteroid lightcurve work is designed to investigate the large-scale shapes of the asteroids, as well as to reveal anomalous features such as major topography, possible satellites, or albedo variations. Work on the nature of viscous transport in planetary rings, emphasizing the role of individual particles' physical properties, has yielded a method for estimating both angular momentum and mass transport given an optical-thickness gradient. This result offers the prospect of ringlet instability, which may explain the square-profile ringlets in Saturn's C Ring. Thermal and reflected lightcurves of 532 Herculina have been interpreted to show that albedo variations cannot be the primary cause of variations. A lightcurve simulation has been developed to model complex asteroidal figures. Bamberga was observed during the December occultation as part of the joint LPL-Lowell program.

Greenberg, Richard↗

NASA NTRS1989

Kaon-nucleus scattering

The derivations of the Lippmann-Schwinger equation and Watson multiple scattering are given. A simple optical potential is found to be the first term of that series. The number density distribution models of the nucleus, harmonic well, and Woods-Saxon are used without t-matrix taken from the scattering experiments. The parameterized two-body inputs, which are kaon-nucleon total cross sections, elastic slope parameters, and the ratio of the real to the imaginary part of the forward elastic scattering amplitude, are presented. The eikonal approximation was chosen as our solution method to estimate the total and absorptive cross sections for the kaon-nucleus scattering.

Hong, Byungsik↗

NASA NTRS1989

A laboratory investigation into microwave backscattering from sea ice

The purpose of the research reported here was to determine the sources of scattering of artificial sea ice, to compare backscatter measurements semi-quantitatively with theoretical predictions, and to develop inexpensive polarimetric radars for sea ice backscatter studies. A brief review of the dielectric properties of sea ice and of commonly used surface and volume scattering theories is presented. We provide a description of the backscatter measurements performed and experimental techniques used. The development of inexpensive short-range polarimetric radars is discussed. We discuss limitations of this system and the development of a radar that avoids the oscillator instability problems of continuously tunable oscillators by doing measurements at discrete frequencies, using a synthesized frequency source. We present results of simple test of copolar phase capability and a simple method of doing phase calibrations. We discuss ice surface characterization data and techniques. We also present a method of estimating the standard deviation of rms height and correlation length for cases of few data points.

Bredow, Jonathan W.↗

NASA NTRS1989

Experimental verification of damping mechanisms in a composite beam

A method of estimating the distributed damping parameters based on the measured modal parameters (frequency and damping ratios) was derived. Three different mathematical models were used to model the damping mechanism of a quasi-isotropic pultruded cantilevered beam. These three models were (1) viscous (air) damping, (2) strain rate damping, and (3) both viscous and strain rate damping. The eigenvalues of the partial differential equation model were found to be uninfluenced by any of the three assumed damping models. Values were obtained for each of the damping models as well as the modulus of elasticity of the beam. It was found that the two-parameter damping model provided the best fit to measured modal data. However, the two-parameter damping model could only reproduce the measured damping ratios to within 85 percent.

Cudney, Harley H.↗