Search NASA⌕ Search

SEARCH · Search NASA

Results for “Event Detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Preemptive signal integrity control

Techniques are provided herein for pre-emptively reinforcing one or more buses of a computing device against the effects of signal noise that could cause a reduction in signal integrity. The techniques generally include detecting an event (or “trigger”) that would tend to indicate that a reduction in signal integrity will occur, examining a reinforcement action policy and system status to determine what reinforcement action to take, and performing the reinforcement action.

Roberts, David A.↗

Environmental sampling at Amchitka and Adak Islands, Alaska - 15317

Amchitka Island is near the western end of the Aleutian Islands, approximately 2157 km (1340 miles) west-southwest of Anchorage, Alaska. The US government conducted three underground nuclear tests on Amchitka between 1965 and 1971 and has conducted biological monitoring on the island since before 1965; the most recent monitoring occurred in the summer of 2011. A working group of stakeholders collected samples of marine biota, sediment, and sea water for analysis of test-related radionuclides to determine if subsistence- and commercial-catch seafood in the ocean near Amchitka and Adak Island (a reference area) is safe to eat. Dietary intake information for the risk estimates used a range of diets based on published surveys of four Aleut villages and a composite diet. The risk estimates indicated that seafood harvested at Amchitka and Adak is considered safe for consumption at the intake levels for each of five diets evaluated. Although increased cesium concentrations (Cs-134) possibly related to the Fukushima Dai-ichi event were detected in certain samples; the increased levels have not resulted in unacceptable risk from the ingestion of these seafoods. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Persistent Acoustic Sensing for Monitoring A Reactor Facility - Oral Presentation

Measurements over the past few years, taking place within the Multi-Informatics for Nuclear Operations Scenarios (MINOS) project, show that infrasound and low-frequency acoustic monitoring can detect, and often quantify, activities that occur on-site at a large research reactor. Observable activities include: crane translation, lifting, and lowering; differentiation between loaded and unloaded crane operations; access door opening and closing; vehicle operations; and cooling tower fan operation. Advanced data analytic and spectral feature extraction methods can be used to interpret selected signatures to reach a deeper understanding of different reactor activities. These measurements are being conducted using a network of smartphones that continuously operate in conjunction with cloud-based architectures. A recent addition to the system is the development and deployment of a real-time, cloud-based analytic framework that supports near-real-time alarming which can facilitate tip-and-cue protocols. This paper will present recent research advances in this area including studies to explore the transferability of learned parameters from one smartphone to another, the detectability of events from multiple sensors at different locations simultaneously, and the feasibility of porting analytical tools directly to the smartphones to allow edge computing with optimized configurations.

42 ENGINEERING↗

Development of a HT seismic downhole tool.

Enhanced Geothermal Systems (EGS) require the stimulation of the drilled well, likely through hydraulic fracturing. Whether fracturing of the rock occurs by shear destabilization of natural fractures or by extensional failure of weaker zones, control of the fracture process will be required to create the flow paths necessary for effective heat mining. As such, microseismic monitoring provides one method for real-time mapping of the fractures created during the hydraulic fracturing process. This monitoring is necessary to help assess stimulation effectiveness and provide the information necessary to properly create the reservoir. In addition, reservoir monitoring of the microseismic activity can provide information on reservoir performance and evolution over time. To our knowledge, no seismic tool exists that will operate above 125 C for the long monitoring durations that may be necessary. Replacing failed tools is costly and introduces potential errors such as depth variance, etc. Sandia has designed a high temperature seismic tool for long-term deployment in geothermal applications. It is capable of detecting microseismic events and operating continuously at temperatures up to 240 C. This project includes the design and fabrication of two High Temperature (HT) seismic tools that will have the capability to operate in both temporary and long-term monitoring modes. To ensure the developed tool meets industry requirements for high sampling rates (>2ksps) and high resolution (24-bit Analog-to-Digital Converter) two electronic designs will be implemented. One electronic design will utilize newly developed 200 C electronic components. The other design will use qualified Silicon-on-Insulator (SOI) devices and will have a continuous operating temperature of 240 C.

15 GEOTHERMAL ENERGY↗

XMM-NEWTON SLEW SURVEY OBSERVATIONS OF THE GRAVITATIONAL WAVE EVENT GW150914

The detection of the first gravitational wave (GW) transient GW150914 prompted an extensive campaign of follow-up observations at all wavelengths. Although no dedicated XMM-Newton observations have been performed, the satellite passed through the GW150914 error region during normal operations. Here we report the analysis of the data taken during these satellite slews performed two hours and two weeks after the GW event. Our data cover 1.1 and 4.8 deg{sup 2} of the final GW localization region. No X-ray counterpart to GW150914 is found down to a sensitivity of 6 × 10{sup −13} erg cm{sup −2} s{sup −1} in the 0.2–2 keV band. Nevertheless, these observations show the great potential of XMM-Newton slew observations for searching for the electromagnetic counterparts of GW events. A series of adjacent slews performed in response to a GW trigger would take ≲1.5 days to cover most of the typical GW credible region. We discuss this scenario and its prospects for detecting the X-ray counterpart of future GW detections.

79 ASTRONOMY AND ASTROPHYSICS↗

Dynamic Scheduling: Target of Opportunity Observations of Gravitational Wave Events

The simultaneous detection of electromagnetic and gravitational waves from the coalescence of two neutron stars (GW170817 and GRB170817A) has ushered in a new era of ‘multimessenger’ astronomy, with electromagnetic detections spanning from gamma to radio. This great opportunity for new scientific investigations raises the issue of how the available multimessenger tools can best be integrated to constitute a powerful method to study the transient Universe in particular. To facilitate the classification of possible optical counterparts to gravitational wave events, it is important to optimize the scheduling of observations and the filtering of transients, both key elements of the follow-up process. In this work, we describe the existing workflow whereby telescope networks such as GRANDMA and GROWTH are currently scheduled; we then present modifications we have developed for the scheduling process specifically, so as to face the relevant challenges that have appeared during the latest observing run of Advanced LIGO and Advanced Virgo. We address issues with scheduling more than one epoch for multiple fields within a skymap, especially for large and disjointed localizations. This is done in two ways: by optimizing the maximum number of fields that can be scheduled and by splitting up the lobes within the skymap by right ascension to be scheduled individually. In addition, we implement the ability to take previously observed fields into consideration when rescheduling. We show the improvements that these modifications produce in making the search for optical counterparts more efficient, and we point to areas needing further improvement.

Gravitational waves↗

Measurement of the total cross section of the reaction K{sup -}p{yields}{sigma}{sup 0}{gamma} between 514 and 750 MeV/c

We report the first measurements of the total cross section of the reaction K{sup -}p{yields}{sigma}{sup 0}{gamma} at eight beam momenta from 514 to 750 MeV/c. The data were obtained at the Alternating Gradient Synchrotron (AGS) at Brookhaven National Laboratory using the Crystal Ball detector consisting of 672 NaI crystals. All charged particles were vetoed by a barrel of plastic scintillators, resulting in a study of only the neutral decays of the {sigma}{sup 0}. The prompt photon and the photons from the decay products of {sigma}{sup 0} were detected for each reconstructed event; the neutron was also detected in a small fraction of the events.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Martian seismicity

During the Viking mission to Mars, the seismometer on Lander II collected approximately 0.24 earth years of observational data, excluding periods of time dominated by wind-induced Lander vibration. The 'quiet-time' data set contains no confirmed seismic events. A proper assessment of the significance of this fact requires quantitative estimates of the expected detection rate of the Viking seismometer. The first step is to calculate the minimum magnitude event detectable at a given distance, including the effects of geometric spreading, anelastic attenuation, seismic signal duration, seismometer frequency response, and possible poor ground coupling. Assuming various numerical quantities and a Martian seismic activity comparable to that of intraplate earthquakes, the appropriate integral gives an expected annual detection rate of 10 events, nearly all of which are local. Thus only two to three events would be expected in the observational period presently on hand and the lack of observed events is not in gross contradiction to reasonable expectations. Given the same assumptions, a seismometer 20 times more sensitive than the present instrument would be expected to detect about 120 events annually.

Goins, N. R.↗

Effect of Baseline Period on Quantification of Climate Extremes over the United States

Extreme weather events, including heatwaves, heavy precipitation, and drought, have a large impact on society through human health, destruction of infrastructure, ecological change, and economic losses. Reanalyses such as NASA’s Modern Era Retrospective Analysis, version 2 (MERRA-2) are a valuable tool for analyzing past extreme events to determine their underlying causes and how extremes have changed over the past four decades. The detection of extreme events relies on a threshold for precipitation or temperature that is derived using a reference period, which can then be used to determine how extreme an event was or what the return period is. Operational centers typically use a 30-year climatology period that shifts in time every ten years, while the World Meteorological Organization suggests that the maximum amount of data should be included for the detection of extreme events due to their rare occurrence. As global and regional climate continues to change, the interpretation of extreme events is reliant on the baseline period that is used for the underlying thresholds and can be a source of uncertainty for the policy making community. Three baseline periods – 1981-2010, 1991-2020, and 1981-2020 – will be used to compute percentiles of temperature and precipitation across the contiguous United States and will then by employed to determine monthly indices representing heatwaves, cold spells, and extreme precipitation events. A spatial and temporal analysis of the resulting extreme weather indices will demonstrate the appropriateness for each baseline period for the evaluation of extreme events.

Extremes↗

Applying Waveform Correlation to Reduce Seismic Analyst Workload Due to Repeating Mining Blasts

Agencies that monitor for underground nuclear tests are interested in techniques that automatically characterize mining blasts to reduce the human analyst effort required to produce high–quality event bulletins. Waveform correlation is effective in finding similar waveforms from repeating seismic events, including mining blasts. We report the results of an experiment to detect and identify mining blasts for two regions, Wyoming (U.S.A.) and Scandinavia, using waveform templates recorded by multiple International Monitoring System stations of the Preparatory Commission for the Comprehensive Nuclear–Test–Ban Treaty Organization (CTBTO PrepCom) for up to 10 yr prior to the time of interest. We discuss approaches for template selection, threshold setting, and event detection that are specialized for characterizing mining blasts using a sparse, global network. We apply the approaches to one week of data for each of the two regions to evaluate the potential for establishing a set of standards for waveform correlation processing of mining blasts that can be generally applied to operational monitoring systems with a sparse network. Here, we compare candidate events detected with our processing methods to the Reviewed Event Bulletin of the International Data Centre to assess potential reduction in analyst workload.

58 GEOSCIENCES↗

Detection Limits and Near‐Field Ground Motions of Fast and Slow Earthquakes

Abstract We investigate theoretical limits to detection of fast and slow seismic events, and spatial variations of ground motion expected from M 6 earthquakes at short epicentral distances. The analyses are based on synthetic velocity seismograms calculated with the discrete wavenumber method assuming seismic velocities and attenuation properties of the crust in Southern California. The examined source properties include different magnitudes ( M −1.0 to M 6.0), static stress drops (0.1–10 MPa), and slow and fast ruptures (0.1–0.9 of shear wave velocity). For the M 6 events we also consider variations in rise times producing crack‐ and pulse‐type events and different rupture directivities. Slow events produce ground motion with considerably lower amplitude than corresponding regular fast earthquakes with the same magnitude, and hence are significantly more difficult to detect. The static stress drop and slip rise time also affect the maximum radiated seismic motion, and hence event detectability. Apart from geometrical factors, the saturation and depletion of seismic ground motion at short epicentral distances stem from radiation pattern, earthquake size (magnitude, stress drop), and rupture directivity. The rupture velocity, rise time, and directivity affect significantly the spatial pattern of the ground motions. The results can help optimizing detection of slow and fast small earthquakes and understand the spatial distribution of ground motion generated by large events.

58 GEOSCIENCES↗

Event Horizon Image within Black Hole Shadow

We argue that a genuine image of the black hole viewed by a distant observer is not its shadow, but a more compact event horizon image probed by the luminous matter plunging into black hole. The external border of the black hole shadow is washed out by radiation from matter plunging into black hole and approaching the event horizon. This effect will crucially influence the results of future observations by the Event Horizon Telescope. We show that gravitational lensing of the luminous matter plunging into black hole provides the possibility for visualization of the event horizon. The lensed image of the event horizon is formed by the highly red-shifted photons emitted by the plunging matter very near the black hole event horizon and detected by a distant observer. The resulting event horizon image is a gravitationally lensed projection on the celestial sphere of the whole black hole event horizon sphere. Seemingly, black holes are the unique objects in the Universe which may be viewed by distant observers at once from both the front and back sides.

79 ASTRONOMY AND ASTROPHYSICS↗

Radiation-Tolerant Intelligent Memory Stack - RTIMS

This innovation provides reconfigurable circuitry and 2-Gb of error-corrected or 1-Gb of triple-redundant digital memory in a small package. RTIMS uses circuit stacking of heterogeneous components and radiation shielding technologies. A reprogrammable field-programmable gate array (FPGA), six synchronous dynamic random access memories, linear regulator, and the radiation mitigation circuits are stacked into a module of 42.7 42.7 13 mm. Triple module redundancy, current limiting, configuration scrubbing, and single- event function interrupt detection are employed to mitigate radiation effects. The novel self-scrubbing and single event functional interrupt (SEFI) detection allows a relatively soft FPGA to become radiation tolerant without external scrubbing and monitoring hardware

Ng, Tak-kwong↗

A Comparison of Stratospheric Smoke Events Seen by SAGE II (1984-2005) and SAGE III (2017-2021)

The Stratospheric Aerosol and Gas Experiment (SAGE II) operated for over 20 years (1984-2005) and collected near global observations of aerosol extinction coefficient from the upper troposphere to about40 km. SAGE III has flown aboard the International Space Station (ISS) since 2017 and has collected comparable aerosol measurements during this period. The SAGE II record is dominated by recovery from El Chichón (1982) and the Pinatubo eruption of 1991 with a few smaller volcanic events that are detectable in the data set. In addition, a number of pyrocumulus events injected smoke into the lower stratosphere with magnitudes that are comparable to the smaller volcanic events. The shorter SAGE III/ISS record is qualitatively different than SAGE II’s with a number of small to moderate volcanic eruptions in both low and high latitudes (e.g., Ambae in 2018 and Raikoke in 2020) as well several smokeevents including the two largest events seen by SAGE-like instruments: the BC pyrocumulus event in 2017 and the Australian brush fires of 2020/2021. In this paper, I will review the detection and quantification of the magnitude of these smoke events with a particular focus on the differences between the two data periods.

SAGE↗

Quantifying SAGE II (1984-2005) and SAGE III/ISS (2017-2022) Observations of Smoke in the Stratosphere

The Stratospheric Aerosol and Gas Experiment (SAGE II) operated for over 20 years (1984-2005) and collected near global observations of aerosol extinction coefficient from the upper troposphere to about 40 km. SAGE III has flown aboard the International Space Station (ISS) since 2017 and has collected comparable aerosol measurements during this period. The SAGE II record is dominated by recovery from El Chichón (1982) and the Pinatubo eruption of 1991 with a few smaller volcanic events that are detectable in the data set. In addition, a number of pyrocumulus events injected smoke into the lower stratosphere with magnitudes that are comparable to the smaller volcanic events. The shorter SAGE III/ISS record is qualitatively different than SAGE II’s with a number of small to moderate volcanic eruptions in both low and high latitudes (e.g., Ambae in 2018 and Raikoke in 2020) as well several smoke events including the two largest events seen by SAGE-like instruments: the BC pyrocumulus event in 2017 and the Australian brush fires of 2020/2021. In this paper, I will review the detection and quantification of the magnitude of these smoke events with a particular focus on the differences between the two data periods.

Smoke↗

Quantifying SAGE II (1984-2005) and SAGE III/ISS (2017-2022) Observations of Smoke in the Stratosphere

The Stratospheric Aerosol and Gas Experiment (SAGE II) operated for over 20 years (1984-2005) and collected near global observations of aerosol extinction coefficient from the upper troposphere to about 40 km. SAGE III has flown aboard the International Space Station (ISS) since 2017 and has collected comparable aerosol measurements during this period. The SAGE II record is dominated by recovery from El Chichón (1982) and the Pinatubo eruption of 1991 with a few smaller volcanic events that are detectable in the data set. In addition, a number of pyrocumulus events injected smoke into the lower stratosphere with magnitudes that are comparable to the smaller volcanic events. The shorter SAGE III/ISS record is qualitatively different than SAGE II’s with a number of small to moderate volcanic eruptions in both low and high latitudes (e.g., Ambae in 2018 and Raikoke in 2020) as well several smoke events including the two largest events seen by SAGE-like instruments: the BC pyrocumulus event in 2017 and the Australian brush fires of 2020/2021. In this talk, I will review the detection and quantification of the magnitude of these smoke events with a particular focus on the differences between the two data periods.

Smoke Stratosphere SAGE↗

Quantifying SAGE II (1984-2005) and SAGE III/ISS (2017-2022) Observations of Smoke in the Stratosphere

The Stratospheric Aerosol and Gas Experiment (SAGE II) operated for over 20 years (1984-2005) and collected near global observations of aerosol extinction coefficient from the upper troposphere to about 40 km. SAGE III has flown aboard the International Space Station (ISS) since 2017 and has collected comparable aerosol measurements during this period. The SAGE II record is dominated by recovery from El Chichón (1982) and the Pinatubo eruption of 1991 with a few smaller volcanic events that are detectable in the data set. In addition, a number of pyrocumulus events injected smoke into the lower stratosphere with magnitudes that are comparable to the smaller volcanic events. The shorter SAGE III/ISS record is qualitatively different than SAGE II’s with a number of small to moderate volcanic eruptions in both low and high latitudes (e.g., Ambae in 2018 and Raikoke in 2020) as well several smoke events including the two largest events seen by SAGE-like instruments: the BC pyrocumulus event in 2017 and the Australian brush fires of 2020/2021. In this talk, I will review the detection and quantification of the magnitude of these smoke events with a particular focus on the differences between the two data periods.

SAGE↗