Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLUORINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Oxide-free InAs(111)A interface in metal-oxide-semiconductor structure with very low density of states prepared by anodic oxidation

In this letter, we present structural, compositional, and electrical characteristics of anodic oxide layer-based metal-oxide-semiconductor (MOS) capacitors on n-type InAs(111)A, along with the effect of a thin fluorinated interfacial passivation layer. Electrochemical oxidation in acid electrolyte with addition of fluorine (NH{sub 4}F) led to the formation of oxygen free well-ordered wide gap fluorinated interfacial layer at InAs(111)A with the fixed charge (Q{sub fix}) and density of interface states (D{sub it}) in the range of (4–6) × 10{sup 10 }cm{sup −2} and (2–12) × 10{sup 10 }eV{sup −1 }cm{sup −2}, respectively. We found that MOS capacitors showed excellent capacitance-voltage characteristics with very small frequency dispersion (<1% and <15 mV). Fluorinated interfacial layer consists of crystalline isostructural compound with the InAs substrate, which remains intact with the atomic smoothness and sharpness that explain unpinned behavior of the Fermi level.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Updated THM astrophysical factor of the {sup 19}F(p,α){sup 16}O reaction and influence of new direct data at astrophysical energies

Fluorine nucleosynthesis represents one of the most intriguing open questions in nuclear astrophysics. It has triggered new measurements which may modify the presently accepted paradigm of fluorine production and establish fluorine as an accurate probe of the inner layers of asymptotic giant branch (AGB) stars. Both direct and indirect measurements have attempted to improve the recommended extrapolation to astrophysical energies, showing no resonances. In this work, we will demonstrate that the interplay between direct and indirect techniques represents the most suitable approach to attain the required accuracy for the astrophysical factor at low energies, E{sub c.m.}≲300 keV, which is of interest for fluorine nucleosynthesis in AGB stars. We will use the recently measured direct {sup 19}F(p,α){sup 16}O astrophysical factor in the 600 keV≲E{sub c.m.}≲800 keV energy interval to renormalize the existing Trojan Horse Method (THM) data spanning the astrophysical energies, accounting for all identified sources of uncertainty. This has a twofold impact on nuclear astrophysics. It shows the robustness of the THM approach even in the case of direct data of questionable quality, as normalization is extended over a broad range, minimizing systematic effects. Moreover, it allows us to obtain more accurate resonance data at astrophysical energies, thanks to the improved {sup 19}F(p,α){sup 16}O direct data. Finally, the present work strongly calls for more accurate direct data at low energies, so that we can obtain a better fitting of the direct reaction mechanism contributing to the {sup 19}F(p,α){sup 16}O astrophysical factor. Indeed, this work points out that the major source of uncertainty affecting the low-energy S(E) factor is the estimate of the non-resonant contribution, as the dominant role of the 113 keV resonance is now well established.

79 ASTRONOMY AND ASTROPHYSICS↗

Kinetics of Separations of Volatile Fluorides from Used Fuel Using NF3

The study of the fluorination of UO2 with various fluorinating agents using thermogravimetric analysis (TGA) is well documented. Additional research has examined the fluorination of other metals and metal oxides. Seeing the possible benefit of using analogous fluorination technologies to affect separations in used nuclear fuel, we have expanded the existing research to an investigation of the reaction of NF3 with UO2 and NpO2. The conversion fractions gathered from experimental results have been compared with those predicted by existing models for various rate-limiting phenomena.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Syntheses and characterization of elpasolite-type ammonium alkali metal hexafluorometallates(III)

Crystal structures of three fluorides (NH{sub 4}){sub 2}NaFeF{sub 6}, (Fe), (NH{sub 4}){sub 2}NaGaF{sub 6}, (Ga), and (NH{sub 4}){sub 2}NaCrF{sub 6}, (Cr), as well as a substituted compound [(NH{sub 4}){sub 1-x}K{sub x}]{sub 2}KAlF{sub 6} (x{approx}0.17), (Al), have been refined using single-crystal and powder X-ray diffraction techniques. All these four ammonium hexafluorides have a cubic elpasolite-type structure and crystallize in the space group Fm3-bar m with lattice constants a=8.483(3), 8.450 (3), 8.4472(2) and 8.724(3) A for compounds (Fe), (Ga), (Cr) and (Al), respectively. The effective ionic radius of the ammonium ion calculated from those compounds has a mean value of R=1.729 A for CN=12. An ultraviolet-visible absorption spectrum of (NH{sub 4}){sub 2}NaCrF{sub 6}, measured at room temperature, gives a crystal field (Dq=1575 cm{sup -1}) and Racah parameters (B=758 cm{sup -1} and C=3374 cm{sup -1}). Abnormal anisotropic thermal parameters of fluorine atoms have been observed in the compound (Al), and interpreted to arise from four strong hydrogen bonds (F...H-N) that are distributed in a square form around each fluorine atom. - Graphical abstract: Abnormal anisotropic thermal parameters of fluorine atoms have been observed in the compound [(NH{sub 4}){sub 1-x}K{sub x}]{sub 2}KAlF{sub 6} (x{approx}0.17), and interpreted to arise from four strong hydrogen bonds (F...H-N) that are distributed in a square form around each fluorine atom. The endmembers' phase transitions at low temperature are believed to be caused by them.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lubricant-Infused Nanoparticulate Coatings Assembled by Layer-by-Layer Deposition

Omniphobic coatings are designed to repel a wide range of liquids without leaving stains on the surface. A practical coating should exhibit stable repellency, show no interference with color or transparency of the underlying substrate and, ideally, be deposited in a simple process on arbitrarily shaped surfaces. We use layer-by-layer (LbL) deposition of negatively charged silica nanoparticles and positively charged polyelectrolytes to create nanoscale surface structures that are further surface-functionalized with fluorinated silanes and infiltrated with fluorinated oil, forming a smooth, highly repellent coating on surfaces of different materials and shapes. We show that four or more LbL cycles introduce sufficient surface roughness to effectively immobilize the lubricant into the nanoporous coating and provide a stable liquid interface that repels water, low-surface-tension liquids and complex fluids. The absence of hierarchical structures and the small size of the silica nanoparticles enables complete transparency of the coating, with light transmittance exceeding that of normal glass. The coating is mechanically robust, maintains its repellency after exposure to continuous flow for several days and prevents adsorption of streptavidin as a model protein. The LbL process is conceptually simple, of low cost, environmentally benign, scalable, automatable and therefore may present an efficient synthetic route to non-fouling materials.

Sunny, S↗

High Performance Anion Exchange Membrane Fuel Cells Enabled by Fluoropoly(olefin) Membranes

Abstract Although the peak power density of anion exchange membrane fuel cells (AEMFCs) has been raised from ≈0.1 to ≈1.4 W cm −2 over the last decade, a majority of AEMFCs reported in the literature have not been demonstrated to achieve consistently high performance and steady‐state operation. Poly(olefin)‐based AEMs with fluorine substitution on the aromatic comonomer show considerably higher dimensional stability compared to samples that do not contain fluorine. More importantly, fluorinated poly(olefin)‐based AEMs exhibit high hydroxide conductivity without excessive hydration due to a new proposed mechanism where the fluorinated dipolar monomer facilitates increased hydroxide dissociation and transport. Using this new generation of AEMs, a stable, high‐performance AEMFC is operated for 120 h. When the fuel cell configuration is subjected to a constant current density of 600 mA cm −2 under H 2 /O 2 flow, the cell voltage declines only 11% (from 0.75 to 0.67 V) for the first 20 h during break‐in and the cell voltage loss is low (0.2 mV h −1 ) over the subsequent 100 h of cell testing. The ease of synthesis, potential for low‐cost commercialization, and remarkable ex situ properties and in situ performance of fluoropoly(olefin)‐based AEM renders this material a benchmark membrane for practical AEMFC applications.

Zhu, Liang↗

Single‐Junction Binary‐Blend Nonfullerene Polymer Solar Cells with 12.1% Efficiency

A new fluorinated nonfullerene acceptor, ITIC‐Th1, has been designed and synthesized by introducing fluorine (F) atoms onto the end‐capping group 1,1‐dicyanomethylene‐3‐indanone (IC). On the one hand, incorporation of F would improve intramolecular interaction, enhance the push–pull effect between the donor unit indacenodithieno[3,2‐b]thiophene and the acceptor unit IC due to electron‐withdrawing effect of F, and finally adjust energy levels and reduce bandgap, which is beneficial to light harvesting and enhancing short‐circuit current density ( J SC ). On the other hand, incorporation of F would improve intermolecular interactions through CF···S, CF···H, and CF···π noncovalent interactions and enhance electron mobility, which is beneficial to enhancing J SC and fill factor. Indeed, the results show that fluorinated ITIC‐Th1 exhibits redshifted absorption, smaller optical bandgap, and higher electron mobility than the nonfluorinated ITIC‐Th. Furthermore, nonfullerene organic solar cells (OSCs) based on fluorinated ITIC‐Th1 electron acceptor and a wide‐bandgap polymer donor FTAZ based on benzodithiophene and benzotriazole exhibit power conversion efficiency (PCE) as high as 12.1%, significantly higher than that of nonfluorinated ITIC‐Th (8.88%). The PCE of 12.1% is the highest in fullerene and nonfullerene‐based single‐junction binary‐blend OSCs. Moreover, the OSCs based on FTAZ:ITIC‐Th1 show much better efficiency and better stability than the control devices based on FTAZ:PC 71 BM (PCE = 5.22%).

Zhao, Fuwen↗

Chemoenzymatic Platform for Synthesis of Chiral Organofluorines Based on Type II Aldolases

Abstract Aldolases are C−C bond forming enzymes that have become prominent tools for sustainable synthesis of complex synthons. However, enzymatic methods of fluorine incorporation into such compounds are lacking due to the rarity of fluorine in nature. Recently, the use of fluoropyruvate as a non‐native aldolase substrate has arisen as a solution. Here, we report that the type II HpcH aldolases efficiently catalyze fluoropyruvate addition to diverse aldehydes, with exclusive (3 S )‐selectivity at fluorine that is rationalized by DFT calculations on a mechanistic model. We also measure the kinetic parameters of aldol addition and demonstrate engineering of the hydroxyl group stereoselectivity. Our aldolase collection is then employed in the chemoenzymatic synthesis of novel fluoroacids and ester derivatives in high stereopurity (d.r. 80–98 %). The compounds made available by this method serve as precursors to fluorinated analogs of sugars, amino acids, and other valuable chiral building blocks.

Fang, Jason↗

The use of gas chromatography – high resolution mass spectrometry for suspect screening and non-targeted analysis of per- and polyfluoroalkyl substances

This study is a workflow development for the analysis, identification, and categorization of per- and polyfluoroalkyl substances (PFAS) using gas chromatography-high resolution mass spectrometry (GC-HRMS) with non-targeted analysis (NTA) and suspect screening techniques. The behavior of various PFAS in a GC-HRMS was studied with regards to retention indices, ionization susceptibility, fragmentation patterns, etc. A custom PFAS database was constructed from 141 diverse PFAS. The database contains mass spectra from electron ionization (EI) mode, as well as MS and MS/MS spectra from positive and negative chemical ionization (PCI and NCI, respectively) modes. Common fragments of PFAS were identified across a diverse set of 141 PFAS analyzed. A workflow for suspect screening of PFAS and partially fluorinated products of incomplete combustion/destruction (PICs/PIDs) was developed which utilized both the custom PFAS database and external databases. PFAS and other fluorinated compounds were identified in both a challenge sample (designed to test the identification workflow) and incineration samples suspected to contain PFAS and fluorinated PICs/PIDs. The challenge sample resulted in a 100% true positive rate (TPR) for PFAS which were present in the custom PFAS database. In conclusion, several fluorinated species were tentatively identified in the incineration samples using the developed workflow.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Production of anhydrous ƒ-element fluorides through the ionothermal treatment of ƒ-element oxalates

The pivotal role of uranium and plutonium fluorides in the nuclear fuel cycle, particularly in the pyrochemical reduction process, is well recognized. Traditionally, the fluorination of uranium and plutonium materials relies on the use of highly toxic and corrosive gases (e.g., HF (g) , F 2(g) ). Herein, we present an alternative approach using the ionic liquid 1‑butyl‑3-methylimidazolium hexafluorophosphate ([Bmim][PF 6 ] (l) ) and/or hexafluorophosphoric acid (HPF 6(aq) ) as fluorinating agents for the ƒ-element oxalates M$^{III}_{2}$(C 2 O 4 ) 3 ∙ 9H 2 O (s) M$^{III}_{2}$(C 2 O 4 ) 3 ∙ 9H 2 O (s) (M III = Ce, Pu) and M IV (C 2 O 4 ) 2 ∙ 6H 2 O (s) (M IV = Th, U). Our findings demonstrate that [Bmim][PF 6 ] (l) and HPF 6(aq) enable the ionothermal fluorination of ƒ-element oxalates, resulting in the formation of anhydrous CeF 3(s) , ThF 4(s) , and UF 4(s) within 2 hours at 200 °C. This method also facilitates the partial fluorination of plutonium(III) oxalate, yielding a mixture of anhydrous PuF 3(s) and an unidentified phase. Overall, the ionothermal treatment approach offers a safer and more efficient means of producing anhydrous ƒ-element fluorides than conventional methods involving hazardous gases. In addition, we describe the morphology of UF 4(s) materials as a function of production route and demonstrate the presence of morphological signatures that could be used during a nuclear forensic investigation.

Cerium↗

Superior long-term cycling of high-voltage lithium-ion batteries enabled by single-solvent electrolyte

A new single-solvent electrolyte system comprising lithium bis(fluorosuflonyl) imide (LiFSI) and beta-fluorinated sulfone (TFPMS) was designed to enable very stable long-term cycling of high-voltage lithium-ion batteries. Compared to other fluorinated solvents such as alpha-fluorinated sulfone (FMES) and fluorinated carbonate (FEMC), which are prone to reduction on the graphite anode, the LiFSI-TFPMS system displayed outstanding compatibility with graphite. While regular carbonate and sulfone from the LiFSI electrolyte system are compatible with the graphite anode, their high solvating power not only induces severe corrosion on the aluminum cathode current collector at high voltage, but also renders a low aggregation level at a normal salt concentration (about 1.0 M), resulting in the formation of an unstable solid-electrolyte interphase (SEI) on the graphite anode. Owing to the low solvating power of TFPMS, the aggregation level of the LiFSI-TFPMS system is relatively high even at normal salt concentration, which not only facilitates the formation of a robust SEI by the sacrificial decomposition of LiFSI, but also suppresses the aluminum corrosion of the LiFSI electrolyte system at high voltage. Together with the high intrinsic anodic stability of TFPMS, the superior cycling performance of graphite parallel to LiNi 0.6 Co 0.2 Mn 0.2 O 2 cells was achieved by employing the non-flammable LiFSI-TFPMS single-solvent electrolyte system.

25 ENERGY STORAGE↗

Effect of the Hydrofluoroether Cosolvent Structure in Acetonitrile-Based Solvate Electrolytes on the Li+ Solvation Structure and Li-S Battery Performance.

We evaluate hydrofluoroether (HFE) cosolvents with varying degrees of fluorination in the acetonitrile-based solvate electrolyte to determine the effect of the HFE structure on the electrochemical performance of the Li-S battery. Solvates or sparingly solvating electrolytes are an interesting electrolyte choice for the Li-S battery due to their low polysulfide solubility. The solvate electrolyte with a stoichiometric ratio of LiTFSI salt in acetonitrile, (MeCN)(2)-LiTFSI, exhibits limited polysulfide solubility due to the high concentration of LiTFSI. We demonstrate that the addition of highly fluorinated HFEs to the solvate yields better capacity retention compared to that of less fluorinated HFE cosolvents. Raman and NMR spectroscopy coupled with ab initio molecular dynamics simulations show that HFEs exhibiting a higher degree of fluorination coordinate to Li+ at the expense of MeCN coordination, resulting in higher free MeCN content in solution. However, the polysulfide solubility remains low, and no crossover of polysulfides from the S cathode to the Li anode is observed.

hydrofluoroether cosolvent↗

Simultaneous Increase in Open-Circuit Voltage and Efficiency of Fullerene-Free Solar Cells through Chlorinated Thieno[3,4- b ]thiophene Polymer Donor

The chlorinated polymer, PBTCl, has been found to be an efficient donor in nonfullerene polymer solar cells (PSCs), which showed a blue-shifted absorbance compared to that of its fluorine analogue (PTB7-th) and resulted in more complementary light absorption with a nonfullerene acceptor, such as ITIC. Meanwhile, chlorine substitution lowered the HOMO level of PBTCl, which increased the open-circuit voltage of the corresponding polymer-based devices. The 2D GIWAXS analysis illustrated that the PBTCl/ITIC blend film exhibited a “face-on” orientation and scattering features of both PBTCl and ITIC, suggesting that the blend of PBTCl and ITIC was phase-separated and formed individual crystalline domains of the donor and acceptor, which promoted charge transfer in the bicontinuous film and eventually elevated the solar energy conversion efficiency. The PBTCl-based nonfullerene PSC exhibited a maximum PCE of 7.57% with a Voc of 0.91 V, which was an approximately 13% increasing in the PCE compared to that of the fluorine-analogue-based device.

36 MATERIALS SCIENCE↗

A Comparative Ab Initio Study of the Primary Hydration and Proton Dissociation of Various Imide and Sulfonic Acid Ionomers

We compare the role of neighboring group substitutions on proton dissociation of hydrated acidic moieties suitable for proton exchange membranes through electronic structure calculations. Three pairs of ionomers containing similar electron withdrawing groups within the pair were chosen for the study: two fully fluorinated sulfonyl imides (CF3SO2NHSO2CF3 and CF3CF2SO2NHSO2CF3), two partially fluorinated sulfonyl imides (CH3SO2NHSO2CF3 and C6H5SO2NHSO2CF2CF3), and two aromatic sulfonic acid based material s (CH3C6H4SO3H and CH3 OC6 - H3OCH3C6H4SO3H). Fully optimized counterpoise (CP) corrected geometries were obtained for each ionomer fragment with the inclusion of water molecules at the B3LYP/6-311G** level of density functional theory. Spontaneous proton dissociation was observed upon addition of three water molecules in each system, and the transition to a solvent-separated ion pair occurred when four water molecules were introduced. No considerable quantitative or qualitative differences in proton dissociation, hydrogen bond networks formed, or water binding energies were found between systems containing similar electron withdrawing groups. Each of the sulfonyl imide ionomers exhibited qualitatively similar results regarding proton dissociation and separation. The fully fluorinated sulfonyl imides, however, showed a greater propensity to exist in dissociated and ion-pair separated states at low degrees of hydration than the partially fluorinated sulfonyl imides. This effect is due to the additional electron withdrawing groups providing charge stabilization as the dissociated proton migrates away from the imide anion.

30 DIRECT ENERGY CONVERSION↗

Frictional Properties of Mixed Fluorocarbon/Hydrocarbon Silane Monolayers: A Simulation Study

Because of small surface area to volume ratios nanoscale devices can exhibit dominant surface forces that can quickly degrade unlubricated contacting surfaces. While fluorinated materials have been widely used as lubricants, because of their low critical surface tension and high thermal and mechanical stability, fluorinated monolayer coatings, which are suitable for lubricating nanoscale devices, are less effective as lubricants. Although fluorinated monolayers are more stable than their hydrocarbon counterparts against elevated temperature and humidity, they are known to exhibit higher frictional forces. To overcome this issue, here we study mixed monolayers composed of both hydrocarbon and fluorocarbon chains. Hydrocarbon-based monolayers have been widely studied and shown to improve frictional properties and device life. To investigate the frictional behavior of mixed fluorocarbon/hydrocarbon monolayers, molecular dynamics simulations of pure hydrogenated and fluorinated chains and mixed fluorinated/hydrogenated chains on silica surfaces have been performed. The adhesion and friction between the nanoconfined monolayers as a function of normal load, chain length, and chemical composition of the monolayer coating have been investigated, and mixed fluorocarbon/hydrocarbon monolayers found to outperform both pure fluorocarbon and pure hydrocarbon monolayers. Surface coverage was found to have a significant effect on the performance of all systems studied with higher surface coverage resulting in lower frictional forces. The simulations also show that when the hydrocarbon chains in the monolayer are longer than the fluorocarbon chains, a liquidlike layer is formed by the longer hydrocarbon chains that protrudes above the shorter fluorocarbon chains and aids in friction reduction. A frictional load dependence is also seen in these mixed monolayer systems because of repulsive interactions between the fluorocarbon base layer and the hydrocarbon liquidlike layer. A chain length difference of eight carbons between the base layer and the liquidlike layer was found to provide the lowest friction, while both a larger (because of increased entanglement) and a smaller (insufficient atoms between the contacting base layers to form a liquidlike layer) chain length difference increased friction.

Chemistry↗

The integrated adjustment of chlorine substitution and two-dimensional side chain of low band gap polymers in organic solar cells

A series of conjugated T2 polymers (PBBF1-T2 and PBBCl1-T2), and T3 polymers (PBBF1-T3, PBBCl1-T3 and PBBCl2-T3) were synthesized using chlorinated/fluorinated benzothiadiazole (BT) and the two-dimensional benzo[1,2-b:4,5-b']dithiophene (BDT) units as the building blocks. When compared to the fluorinated polymer, the performance of the polymer photovoltaic devices showed that these chlorinated polymers gave extended optical absorption spectrum, and lower highest occupied molecular orbital (HOMO) energy levels. The introduction of chlorine atoms increases the twist angle between the polymer backbones, and led to a lower HOMO energy level and resulted in the increase of open circuit voltage (V oc) up to 0.84 V in PBBCl2-T3 based devices with a two chlorine substitution. However, the device based on PBBCl1-T3 with only one chlorine atom exhibited the best power conversion efficiency (PCE) which was as high as 6.87% with a V oc of 0.73 V, and this was about 10% higher than that of its fluorinated analogs. Here, this result indicated that the introduction of chlorine atoms into polymers is not only a simple route to synthesize a large amount of material and which avoids the tedious synthesis steps in widely used fluorinated polymers, but it is also a feasible and effective strategy to fine tune the energy level of polymer solar cell with optimized PCE. Furthermore, it is worth noting that the introduction of longer π-conjugation side chains could minimize the influence of chlorine substitution by reducing the twist angle between the polymer backbones, which would reduce the gap of V oc between the chlorinated polymers and their fluorinated analogs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ga lithography in sputtered niobium for superconductive micro and nanowires

This work demonstrates the use of focused ion beam (FIB) implanted Ga as a lithographic mask for plasma etching of Nb films. Using a highly collimated Ga beam of a FIB, Nb is implanted 12 nm deep with a 14 nm thick Ga layer providing etch selectivity better than 15:1 with fluorine based etch chemistry. Implanted square test patterns, both 10 μm by 10 μm and 100 μm by 100 μm, demonstrate that doses above than 7.5 × 10{sup 15 }cm{sup −2} at 30 kV provide adequate mask protection for a 205 nm thick, sputtered Nb film. The resolution of this dry lithographic technique is demonstrated by fabrication of nanowires 75 nm wide by 10 μm long connected to 50 μm wide contact pads. The residual resistance ratio of patterned Nb films was 3. The superconducting transition temperature (T{sub c}) = 7.7 K was measured using a magnetic properties measurement system. This nanoscale, dry lithographic technique was extended to sputtered TiN and Ta here and could be used on other fluorine etched superconductors such as NbN, NbSi, and NbTi.

77 NANOSCIENCE AND NANOTECHNOLOGY↗