Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERSTITIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Effect of hydrogen on the mechanical properties of titanium and its alloys

Occluded hydrogen resulting from cathodic charging of commercially pure titanium and titanium alloys, Ti-8Al-1Mo-1V and Ti-6Al-4V, was shown to cause embrittlement of the alloys. Embrittlement was a function of the interstitial hydrogen content rather than the amount of precipitated titanium hydride. The effects of hydrogen concentration on the critical strain for plastic instability along pure shear directions was determined for alloys Ti-8Al-1Mo-1V and Ti-5Al-2.5Sn. Hydrogen, in concentrations below that necessary for spontaneous hydride precipitation, increased the strain necessary for instability formation or instability failure. The strain rate sensitivity also increased with increasing hydrogen concentration. The effect of hydrogen on slip and twinning was determined for titanium single crystals. The critical resolved shear stress for prism slip was increased and the critical resolved shear stress for twinning was decreased with increasing hydrogen concentration.

Beck, F. H.↗
NASA NTRS1975

Moessbauer studies in zinc-manganese ferrites for use in measuring small velocities and accelerations with great precision

Mossbauer spectroscopy was used for a systematic study of the magnetic behavior of manganese and zinc in mixed ferrites. It was observed that Zn2+ has preference to substitute Mn2+ at interstitial sites where the metal ions are tetrahedrally coordinated with four oxygen neighbors. The internal magnetic hyperfine field at the tetrahedral iron site is larger than that at the octahedral site. The relaxation effects were observed to play an important role as the zinc contents were increased, while the spin-correlation time and the magnetic field were observed to decrease in strength. It is concluded that Mossbauer effect data on complex materials, when used in conjunction with other data, can provide useful insight into the origin of the microscopic properties of magnetic materials.

Escue, W. T.↗
NASA NTRS1975

Hardness behavior of binary and ternary niobium alloys at 77 and 300 K

An investigation was conducted to determine the effects of alloy additions of zirconium, hafnium, molybdenum, tungsten, rhenium, ruthenium, osmium, rhodium, and iridium on the hardness of niobium. Both binary and ternary alloys were investigated by means of hardness tests at 77 and 300 K. Results showed that atomic size misfit plays a dominant role in controlling the hardness of binary niobium alloys. Alloy softening, which occurred at dilute solute additions, is most likely due to an extrinsic mechanism involving interaction between solute elements and interstitial impurities.

Stephens, J. R.↗
NASA NTRS1976

Alloy softening in binary iron solid solutions

An investigation was conducted to determine softening and hardening behavior in 19 binary iron-alloy systems. Microhardness tests were conducted at four temperatures in the range 77 to 411 K. Alloy softening was exhibited by 17 of the 19 alloy systems. Alloy softening observed in 15 of the alloy systems was attributed to an intrinsic mechanism, believed to be lowering of the Peierls (lattice friction) stress. Softening and hardening rates could be correlated with the atomic radius ratio of solute to iron. Softening observed in two other systems was attributed to an extrinsic mechanism, believed to be associated with scavenging of interstitial impurities.

Stephens, J. R.↗
NASA NTRS1976

Effects of water immersion to the neck on pulmonary circulation and tissue volume in man

A rapid noninvasive breathing method is used to obtain serial measurements of the pulmonary capillary blood flow, diffusing capacity per unit of alveolar volume, combined pulmonary tissue plus capillary volume, functional residual capacity, and oxygen consumption in five normal subjects undergoing 6 h of sitting, 4 h of sitting while immersed to the neck in thermoneutral water, and 4 h of lying in thermoneutral water to the neck. The rebreathing method employed a test gas mixture containing 0.5% C2H2, 0.3% C(18)O, 10% He, 21% O2, and balance N2. It is shown that immersion to the neck in the seated posture results in significant increases in sodium excretion cardiac output, and diffusing capacity per unit of alveolar volume. The pulmonary tissue plus capillary volume did not change, demonstrating that the central vascular engorgement induced by water immersion is not accompanied by significant extravasation of fluid into the pulmonary interstitial space.

Begin, R.↗
NASA NTRS1976

Effect of chromium on low-temperature deformation of high-purity iron

A series of very low interstitial Fe-Cr alloys containing 0, 1, 3, 5, and 10 wt% Cr were prepared by vacuum melting and fabricated under argon to 1.83 mm diam wires exposed in an alumina system to wet hydrogen for 200 h at 1423 K followed by 1000 h in ZrH2-purified hydrogen at 1573 K. The wires were then transverse-rolled into thin sheet and cut into tensile specimens subjected to electropolishing and strained to fracture in a series of cryogenic baths ranging from 4.2 K to room temperature. It is shown that small Cr additions lower the twinning stress so that yielding occurs by twinning rather than by slip. Cr in amounts up to 10 wt% has little effect on the yield strength of high-purity Fe between 147 and 300 K, and ductility is not greatly affected at any test temperature. Higher solute contents provide appreciable strengthening only at temperatures of 112 K and below.

Kelley, M. J.↗
NASA NTRS1976

Fast Na/+/-ion transport in skeleton structures

The skeleton structures considered in the investigations consist of a rigid subarray with an interconnected interstitial space in which ions move in three dimensions. The classes of skeleton structures investigated include the Im3 phase of high-pressure KSbO3, the defect-pyrochlore structure illustrated by RbMgAlF6, and the carnegieite structure of high-temperature NaAlSiO4. A description is given of the results obtained in transport measurements involving dense polycrystalline ceramic disks. Results obtained in the case of the Na(+)-ion transport in Na3Zr2PSi2O12 appear particularly promising concerning the possible use of such substances in solid-electrolyte applications.

Goodenough, J. B.↗
NASA NTRS1976

The 55 K specific heat anomaly in palladium hydride

A specific heat anomaly in PdH and PdD has been observed by Aston et al. (1957) close to 55 K. Its position was found to be independent of hydrogen concentration and its magnitude to be linear in hydrogen concentration. Ferguson's (1965) and Brodowsky's (1972) explanations of the anomaly are shown to be unsatisfactory. This is true also for the detailed mechanical statistical model proposed by Staford and McLellan (1974) for interstitial solid solutions of hydrogen in transition metals. It is shown that Gopal's (1966) simple Schottky model of specific heat anomaly, which considers a system of several levels with Boltzmann statistics, provides much better agreement with experiment than the more elaborate models, both in magnitude and in predicting a linear dependence on hydrogen concentration.

Jacobi, N.↗
NASA NTRS1976

The origin of chondrules - Experimental investigation of metastable liquids in the system Mg2SiO4-SiO2

Laser-melted magnesium silicate droplets were supercooled 400-750 C below their equilibrium liquidus temperatures before crystallization and their texture was compared with that of meteoritic and lunar chondrules. Crystal morphology, width and texture were studied in relation to nucleation temperature and bulk composition. It was found that the only phase to nucleate from the forsterite-enstatite normative melts was forsterite. Highly siliceous glass, about 65% SiO2 by weight, was identified interstitially to the forsterite crystals in seven of the MgSiO4 spherules and was thought to be present in all.

Blander, M.↗
NASA NTRS1976

Sustained load crack growth design data for Ti-6Al-4V titanium alloy tanks containing hydrazine

Results are presented for an experimental study intended to provide sustained load crack growth (SLCG) data for Ti-6Al-4V titanium alloy tanks containing MIL-P-26536 hydrazine and refined hydrazine. Fracture mechanics data on crack growth threshold for heat-treated forgings, aged and unaged welds, and aged and unaged heat-affected zones (HAZ) are presented. All tests were made on uniaxially loaded fracture mechanics specimens involving part-through cracks, and an electrical discharge machined notch was used to start the crack. Fracture mechanics design curves of crack growth threshold stress intensity versus temperature are obtained for the temperature range 40-71 C. Major conclusions are that extreme susceptibility to SLCG in hydrazine is a universal property of unaged weld metal in Ti-6Al-4V titanium alloy of normal interstitial content, and that aging both weld metal and HAZ at 510 C for 4 hr after welding completely removes all susceptibility to SLCG induced by hydrazine, with less susceptibility to SLCG in refined hydrazine.

Lewis, J. C.↗
NASA NTRS1977

Extraction of trace elements from ores

Trace elements, such as interstitial impurities, can be extracted by low-pressure, relatively low-temperature vaporization from compositions in which they occur.

Ikramuddin, M.↗
NASA NTRS1977

Cryogenic Properties of a New Tough-Strong Iron Alloy

A program was undertaken to develop an iron-base alloy having a fracture toughness of 220 MPa. m superscript 1/2 with a corresponding yield stress of 1.4 GPa (200 ksi) at-196 C. An Fe-12Ni alloy was selected as the base alloy. Factors considered included reactive metal additions, effects of interstitial impurities, strengthening mechanisms, and weldability. The goals were met in an Fe-12Ni-0.5Al alloy strengthened by thermomechanical processing or by precipitate strengthening with 2 percent Cu. The alloy is weldable with the weld metal and heat affected zone in the postweld annealed condition having toughness equivalent to the base alloy.

Stephens, J. R.↗
NASA NTRS1976

Pyroxene-spinel intergrowths in lunar and terrestrial pyroxenes

The paper describes the oriented intergrowth of spinel and pyroxene in a pigeonite from Luna 20, an augite from Apollo 16 anorthosite 67075, and an orthopyroxene from a spinel lherzolite nodule from the San Quintin volcanic field, Mexico. Using Mo K alpha radiation, photographs were taken of small, hand-picked single-crystals. A mechanism of exsolution is suggested in which the oxygen framework remains intact and spinel nuclei are formed by the migration of cations from interstitial sites and tetrahedral sites in the original non-stoichiometric pyroxene.

Okamura, F. P.↗
NASA NTRS1976

Thermal diffusivity of four Apollo 17 rock samples

The modified Angstrom technique was used to measure the thermal diffusivity of four Apollo 17 rock samples in air at pressures of 1 atm and one-millionth torr in the temperature range 80-460 K, and in CO2 at different pressures for various temperature ranges and at different temperatures for the range of interstitial CO2 gas pressure 1 atm to 0.0001 torr. The experiments with CO2 were intended to simulate Martian conditions, and it was found that the thermal diffusivity of lunar crystalline basalt and breccia varies very little with temperature in a simulated Martian environment, which indicates that the thermal processes in the Martian regolith could be more straightforward than in the lunar regolith.

Horai, K.-I.↗
NASA NTRS1975

Petrographic analysis of Apollo 16 samples 66083,1 and 67943,1

Sample 66083,1 was a 0.5 g sample of 2-4 mm fines from a clod of white impact ejecta. Petrography of 12 fragments of it reveals the following types of fragments: a breccia with a glassy matrix containing about 20-30% of crystal fragments, a fragment of partly devitrified glass, a fine-grained feldspar-rich rock containing plagioclase laths with about 10% of interstitial pyroxene and olivine, a breccia consisting of clasts of plagioclase and plagioclase-rich rock in a fine-grained microcrystalline feldspathic groundmass, a fragment of plagioclase clasts in a fine-grained groundmass of plagioclase and ferromagnesians with some opaques, and a crystalline rock made of subequal amounts of plagioclase and ferromagnesians with some opaque material. For sample 67943,1, all but two fragments could be classed as brecciated anorthosites.

Mason, B.↗
NASA NTRS1977

The Kramer Creek, Colorado meteorite - A new L4 chondrite

Results of bulk chemical analyses and mineralogical and petrographic studies of a chondrite found at Kramer Creek, Colorado, are reported. The meteorite has been classified as an L-group chondrite on the basis of its bulk chemistry, the fayalite content of its olivine (21.7%) and the ferrosilicate content of its pyroxene (18.3%). The presence of interstitial glass and the iron oxide percent mean deviations for olivine and low-Ca pyroxene (2.4 and 4.6%) place the specimen in petrologic group 4 of the Van Schmus and Wood classification (1967)

Gibson, E. K., Jr.↗
NASA NTRS1977

Body composition changes in monkeys during long-term exposure to high acceleration fields

Adult male pig-tailed monkeys, weighing 10-14 kg, were subjected to continuous centrifuging stress for 7 months in acceleration fields up to 2.5 g. In vivo analytical techniques were used to evaluate parameters of body composition, body-fluid distribution, and hematology. Statistically significant losses in total body mass, lean body mass, total body water, extracellular water content and interstitial water content proportional to the level of high g were demonstrated.

Pace, N.↗
NASA NTRS1977

Effects of defect recombination centers on radiation damage in solar cells

Defect production in silicon is modeled on a computer by solving a large system of rate equations. The model includes the main, known defects that are stable at operating temperatures of solar cells in outer space; most of these defects are secondary and tertiary defects. The preliminary result shows that the presence of defect recombination centers for primary defects (i.e., vacancy and interstitial) can effectively reduce the production rates of those stable defects and, consequentially, improve the lifetime of solar cells operating in radiation environment. The characteristics of the defect recombination center required for better solar cell performance along with prospective candidates are discussed.

Cheng, L. J.↗