Search NASA⌕ Search

SEARCH · Search NASA

Results for “Injections”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Controlled electron injection into the wake wave using plasma density inhomogeneity

The electron injection, for the laser wake field accelerator, controlled through the plasma density inhomogeneity is studied on a basis of analytical estimates and two- and three-dimensional particle-in-cell simulations. The injection scheme requires a concordance of the density scale length and laser intensity. It is shown that at a sloping inhomogeneity of plasma the wave breaking produces stronger singularity of the electron density than at a density discontinuity, but develops slower. With the help of simulations for a moderate laser intensity, we demonstrate the optimal plasma density gradient, where the electron injection into the wake wave forms the electron beam with low divergence, small energy spread and high energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast ion charge exchange spectroscopy measurement using a radially injected neutral beam on the large helical device

An experimental technique to investigate fast ion confinement based on charge exchange spectroscopy of H{sub {alpha}}-light was applied to evaluate the confinement property of perpendicular fast ions in large helical device (LHD). Sensitivities of the H{sub {alpha}} spectra to the pitch angles of injected neutral beams (NBs) and these to the angle between the sight line of the measurement and NB injection path are examined. The energy dependence of the charge exchange cross section significantly affects the observed spectra since the driving NB is injected perpendicular to the magnetic field lines in the geometry of LHD. The measured spectra are compared to the spectra of GNET simulation results and the simulated spectra agreed well with the experimental measurement when we take into account the contribution of halo neutrals. Although it is difficult to obtain the fast ion distribution functions directly, this technique provides useful experimental data in benchmarking simulation codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Porous plug gas injection systems for studies of hydrocarbon dissociation and transport in the DIII-D tokamak

A probe has been designed, constructed, and successfully used to inject methane into the DIII-D lower divertor in a manner imitating natural release by chemical erosion. This porous plug injector (PPI) probe consists of a self-contained gas reservoir with an integrated pressure gauge and a 3 cm diameter porous surface through which gas is injected into the lower divertor of the tokamak. The probe is positioned flush with the divertor target surface by means of the divertor materials evaluation system. Two gas delivery systems were developed: in the first, gas flow is regulated by a remotely controlled microvalve and in the second by a fixed micro-orifice flow restrictor. Because of the large area of the porous surface through which gas is admitted, the injected hydrocarbon molecules see a local carbon surface (>90% carbon) similar to that seen by hydrocarbons being emitted by chemical sputtering from surrounding carbon tiles. The distributed gas source also reduces the disturbance to the local plasma while providing sufficient signal for spectroscopic detection. In situ spectroscopic measurements with the PPI in DIII-D allow the direct calibration of response for measured plasma conditions from a known influx of gas.

36 MATERIALS SCIENCE↗

Laser ion source: A direct plasma injection scheme for two-beam type interdigital-H radio frequency quadrupole linac

We developed a laser ion source using a direct plasma injection scheme (DPIS) as an injection system for a two-beam type radio frequency quadrupole (RFQ) linac with an interdigital-H (IH) type cavity. The laser ion source in the DPIS is directly connected to the RFQ cavity without the low energy beam transport system. We achieved a high current C{sup 2+} beam above 60 mA per beam channel from the ion source. The beam will be injected to the two-beam type IH-RFQ linac, and the linac will generate a beam current of approximately 44 mA per beam channel.

43 PARTICLE ACCELERATORS↗

Beam injection improvement for electron cyclotron resonance charge breeders

The injection of a 1+ beam into an electron cyclotron resonance (ECR) charge breeder is classically performed through a grounded tube placed on its axis at the injection side. This tube presents various disadvantages for the operation of an ECR charge breeder. First experiments without a grounded tube show a better use of the microwave power and a better charge breeding efficiency. The optical acceptance of the charge breeder without decelerating tube allows the injection of high intensity 1+ ion beams at high energy, allowing metals sputtering inside the ion source. The use of this method for refractory metallic ion beams production is evaluated.

43 PARTICLE ACCELERATORS↗

Optics of ion beams for the neutral beam injection system on HL-2A Tokamak

The ion beam optics for the neutral beam injection system on HL-2A Tokomak is studied by two- dimensional numerical simulation program firstly, where the emitting surface is taken at 100 Debye lengths from the plasma electrode. The mathematical formulation, computation techniques are described. Typical ion orbits, equipotential contours, and emittance diagram are shown. For a fixed geometry electrode, the effect of plasma density, plasma potential and plasma electron temperature on ion beam optics is examined, and the calculation reliability is confirmed by experimental results. In order to improve ion beam optics, the application of a small pre-acceleration voltage ({approx}100 V) between the plasma electrode and the arc discharge anode is reasonable, and a lower plasma electron temperature is desired. The results allow optimization of the ion beam optics in the neutral beam injection system on HL-2A Tokomak and provide guidelines for designing future neutral beam injection system on HL-2M Tokomak.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Generation of 500 MeV-1 GeV energy electrons from laser wakefield acceleration via ionization induced injection using CO{sub 2} mixed in He

Laser wakefield acceleration of 500 MeV to 1 GeV electron bunches has been demonstrated using ionization injection in mixtures of 4% to 10% of CO{sub 2} in He. 80 TW laser pulses were propagated through 5 mm gas jet targets at electron densities of 0.4-1.5 Multiplication-Sign 10{sup 19}cm{sup -3}. Ionization injection led to lower density thresholds, a higher total electron charge, and an increased probability of producing electrons above 500 MeV in energy compared to self-injection in He gas alone. Electrons with GeV energies were also observed on a few shots and indicative of an additional energy enhancement mechanism.

74 ATOMIC AND MOLECULAR PHYSICS↗

Injection and transport properties of fast electrons in ultraintense laser-solid interactions

Fast electron injection and transport in solid foils irradiated by sub-picosecond-duration laser pulses with peak intensity equal to 4 Multiplication-Sign 10{sup 20} W/cm{sup 2} is investigated experimentally and via 3D simulations. The simulations are performed using a hybrid-particle-in-cell (PIC) code for a range of fast electron beam injection conditions, with and without inclusion of self-generated resistive magnetic fields. The resulting fast electron beam transport properties are used in rear-surface plasma expansion calculations to compare with measurements of proton acceleration, as a function of target thickness. An injection half-angle of {approx}50 Degree-Sign -70 Degree-Sign is inferred, which is significantly larger than that derived from previous experiments under similar conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Progress toward fully noninductive discharge operation in DIII-D using off-axis neutral beam injection

The initial experiments on off-axis neutral beam injection into high noninductive current fraction (f{sub NI}), high normalized pressure (β{sub N}) discharges in DIII-D [J. L. Luxon, Fusion Sci. Technol. 48, 828 (2005)] have demonstrated changes in the plasma profiles that increase the limits to plasma pressure from ideal low-n instabilities. The current profile is broadened and the minimum value of the safety factor (q{sub min}) can be maintained above 2 where the profile of the thermal component of the plasma pressure is found to be broader. The off-axis neutral beam injection results in a broadening of the fast-ion pressure profile. Confinement of the thermal component of the plasma is consistent with the IPB98(y,2) scaling, but global confinement with q{sub min}>2 is below the ITER-89P scaling, apparently as a result of enhanced transport of fast ions. A 0-D model is used to examine the parameter space for f{sub NI}=1 operation and project the requirements for high performance steady-state discharges. Fully noninductive solutions are found with 4<β{sub N}<5 and bootstrap current fraction near 0.5 for a weak shear safety factor profile. A 1-D model is used to show that a f{sub NI}=1 discharge at the top of this range of β{sub N} that is predicted stable to n=1, 2, and 3 ideal MHD instabilities is accessible through further broadening of the current and pressure profiles with off-axis neutral beam injection and electron cyclotron current drive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of hole injection enhancement by MoO{sub 3} buffer layer in organic light emitting diodes

An MoO{sub 3} buffer layer prepared by thermal evaporation as hole injection layer was investigated in organic light emitting diodes. The MoO{sub 3} film inserted between the anode and hole transport layer decreased the operating voltage and enhanced power efficiency. Introduction of 1 nm MoO{sub 3} film, which was found to be the optimum layer thickness, resulted in 45% increase in efficiency compared with traditional ITO anode. Results from atomic force microscopy and photoemission spectroscopy showed that smooth surface morphology and suitable energy level alignment of ITO/MoO{sub 3} interface facilitated hole injection and transport. The hole injection and transport mechanism at the ITO/MoO{sub 3} interface in thin and thick buffer layers were analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A wide variety of injection molding technologies is now applicable to small series and mass production

Micro plastic parts open new fields for application, e. g., to electronics, sensor technologies, optics, and medical engineering. Before micro parts can go to mass production, there is a strong need of having the possibility for testing different designs and materials including material combinations. Hence, flexible individual technical and technological solutions for processing are necessary. To manufacture high quality micro parts, a micro injection moulding machine named formicaPlast based on a two-step plunger injection technology was developed. Resulting from its design, the residence time and the accuracy problems for managing small shot volumes with reproducible high accuracy are uncompromisingly solved. Due to their simple geometry possessing smooth transitions and non adherent inner surfaces, the plunger units allow to process 'all' thermoplastics from polyolefines to high performance polymers, optical clear polymers, thermally sensitive bioresorbables, highly filled systems (the so-called powder injection molding PIM), and liquid silicon rubber (LSR, here with a special kit). The applied platform strategy in the 1K and 2K version allows integrating automation for assembling, handling and packaging. A perpendicular arrangement allows encapsulation of inserts, also partially, and integration of this machine into process chains. Considering a wide variety of different parts consisting of different materials, the high potential of the technology is demonstrated. Based on challenging industrial parts from electronic applications (2K micro MID and bump mat, where both are highly structured parts), the technological solutions are presented in more detail.

36 MATERIALS SCIENCE↗

Domain wall displacement by remote spin-current injection

We demonstrate numerically the ability to displace a magnetic domain wall (DW) by remote spin current injection. We consider a long and narrow magnetic nanostripe with a single DW. The spin-polarized current is injected perpendicularly to the film plane through a small nanocontact which is located at certain distance from the DW initial position. We show that the DW motion can be initiated not only by conventional spin-transfer torque but also by indirect spin-torque, created by remote spin-current injection and then transferred to the DW by the exchange-spring mechanism. An analytical description of this effect is proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fast electron spin resonance controlled manipulation of spin injection into quantum dots

In our spin-injection light-emitting diodes, electrons are spin-polarized in a semimagnetic ZnMnSe spin aligner and then injected into InGaAs quantum dots. The resulting electron spin state can be read out by measuring the circular polarization state of the emitted light. Here, we resonantly excite the Mn 3d electron spin system with microwave pulses and perform time-resolved measurements of the spin dynamics. We find that we are able to control the spin polarization of the injected electrons on a microsecond timescale. This electron spin resonance induced spin control could be one of the ingredients required to utilize the quantum dot electrons or the Mn spins as qubits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical spin injection into InGaAs/GaAs quantum wells: A comparison between MgO tunnel barriers grown by sputtering and molecular beam epitaxy methods

An efficient electrical spin injection into an InGaAs/GaAs quantum well light emitting diode is demonstrated thanks to a CoFeB/MgO spin injector. The textured MgO tunnel barrier is fabricated by two different techniques: sputtering and molecular beam epitaxy. The maximal spin injection efficiency is comparable for both methods. Additionally, the effect of annealing is also investigated for the two types of samples. Both samples show the same trend: an increase of the electroluminescence circular polarization (P{sub c}) with the increase of annealing temperature, followed by a saturation of P{sub c} beyond 350 °C annealing. Since the increase of P{sub c} starts well below the crystallization temperature of the full CoFeB bulk layer, this trend could be mainly due to an improvement of chemical structure at the top CoFeB/MgO interface. This study reveals that the control of CoFeB/MgO interface is essential for an optimal spin injection into semiconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rare-earth neutral metal injection into an electron beam ion trap plasma

We have designed and implemented a neutral metal vapor injector on the SuperEBIT high-energy electron beam ion trap at the Lawrence Livermore National Laboratory. A horizontally directed vapor of a europium metal is created using a thermal evaporation technique. The metal vapor is then spatially collimated prior to injection into the trap. The source's form and quantity constraints are significantly reduced making plasmas out of metal with vapor pressures ≤10{sup −7} Torr at ≥1000 °C more obtainable. A long pulsed or constant feed metal vapor injection method adds new flexibility by varying the timing of injection and rate of material being introduced into the trap.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Efficient room temperature spin-Hall injection across an oxide barrier

Spin Hall injection is demonstrated at room temperature using Pt metal and AlO{sub x} barriers. A substantial spin accumulation, comparable to that of a magnetic spin injection, is transferred into a mesoscopic Cu wire from an adjacent Pt wire across an AlO{sub x} barrier. The Pt spin Hall angle is 0.030 ± 0.007 when assuming a Pt spin diffusion length λ{sub pt} > 6 nm and 0.09 ± 0.02 when assuming λ{sub pt} = 2 nm. Nearly (66 ± 6)% of the spin accumulation on the Pt surface is transferred into the Cu across the AlO{sub x}, enabling an efficient spin Hall injection scheme.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of the helicity injection rate and the Lundquist number on spheromak sustainment

The dynamics of the magnetic relaxation process during the sustainment of spheromak configurations at different helicity injection rates is studied. The three-dimensional activity is recovered using time-dependent resistive magnetohydrodynamic simulations. A cylindrical flux conserver with concentric electrodes is used to model configurations driven by a magnetized coaxial gun. Magnetic helicity is injected by tangential boundary flows. Different regimes of sustainment are identified and characterized in terms of the safety factor profile. The spatial and temporal behavior of fluctuations is described. The dynamo action is shown to be in close agreement with existing experimental data. These results are relevant to the design and operation of helicity injected devices, as well as to basic understanding of the plasma relaxation mechanism in quasi-steady state.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microparticle injection effects on microwave transmission through an overly dense plasma layer

Microparticles injected into a plasma have been shown to deplete the free electron population as electrons are collected through the process of microparticles charging to the plasma floating potential. However, these charged microparticles can also act to scatter electromagnetic signals. These experiments investigate microwave penetration through a previously impenetrable overly dense plasma layer as microparticles are injected and the physical phenomena associated with the competing processes that occur due to electron depletion and microwave scattering. The timescales for when each of these competing processes dominates is analyzed in detail. It was found that while both processes play a significant and dominant role at different times, ultimately, transmission through this impenetrable plasma layer can be significantly increased with microparticle injection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗