Search NASA⌕ Search

SEARCH · Search NASA

Results for “LABELLING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Radiolabeling and in vitro studies of scandium-44 with HOPO chelator for PET imaging

44 Sc has been attracting interest as a clinically viable PET (positron emission tomography) imaging radionuclide due to its high positron branching ratio, 3.97 hour half-life, ideal positron energy of 632 keV and ability to be produced from a generator as well as from a cyclotron. Scandium is also of interest since the coordination is similar to the lanthanides and Ga 3+ that have demonstrated labeling methods. Further, 47 Sc (a potential therapeutic radionuclide) can serve as a matched isotope pair for theranostic applications. While the labeling studies of 44 Sc with DOTA and DOTA derivatives are quite extensive, there is little data on complexation of scandium with the chelator 3,4,3-(LI-1,2-HOPO). This ligand has been used successfully to radiolabel 89 Zr where it was shown to have high stability in vivo. Additionally, preliminary studies with 86 Y, and non-radioactive scandium show promising complexation constants similar to those found with DOTA derivatives. One major advantage of using HOPO is that radiolabeling can be achieved at room temperature while DOTA requires elevated temperatures, that may be detrimental when radiolabeling biomolecules. Radiolabeling of generator produced 44 Sc versus cyclotron produced 44 Sc is also under investigation as there are currently several different post-elution purification methods of generator 44 Sc, and the potential radiolabeling complications of these eluents has not yet been studied. This work focuses on radiolabeling HOPO with generator produced 44 Sc and the in vitro and radioanalytical evaluation of the resulting complexes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2024

Synthesis, Processing, and Use of Isotopically Enriched Epitaxial Oxide Thin Films

Isotopic engineering has emerged as a key approach to study the nucleation, diffusion, phase transitions, and reactions of materials at an atomic level. It aims to uncover mass transport pathways, kinetics, and operational and failure mechanisms of functional materials and devices. Understanding these phenomena leads to deeper insights into important physical processes, such as the transport of ions in energy conversion and storage devices and the role of active sites and supports during heterogeneous catalytic reactions. Likewise, isotopic engineering is being pursued as a means of modifying functionality to enable future technological applications. In this Account, we summarize our recent work employing isotope labeling (e.g., 18 O 2 and 57 Fe) during thin film synthesis and postgrowth processing to reveal growth mechanisms, defect chemistry, and elemental diffusion under working and extreme conditions. Isotope-resolved analysis techniques with nanometer-scale spatial resolution, such as time-of-flight secondary ion mass spectrometry and atom probe tomography, facilitate the accurate quantification of isotopic placement and concentration in our well-defined heterostructures with precisely positioned, isotope-enriched layers. By measuring the nanometer-scale redistribution between natural abundance and isotopically enriched oxygen layers during the deposition of Fe 2 O 3 and Cr 2 O 3 by molecular beam epitaxy, we identified intermixing processes driven by surface adatoms occurring both at the film growth surface and within the first few layers below the surface. Further insights into synthesis mechanisms were gained by studying the tungsten oxide thin films grown by evaporating WO 3 powder in the presence of background 18 O 2 , revealing minimal incorporation of background oxygen during the film formation process. Thermal and radiation-enhanced diffusion in epitaxial Fe and Cr oxides were precisely tracked using 18 O and 57 Fe tracer layers incorporated into model epitaxial oxide thin films. This approach has allowed us to access thermal diffusion behavior at lower temperatures than previously measured, revealing a potential changeover in diffusion mechanism. Understanding radiation-enhanced diffusion in model oxides that represent the surface layers on the structural components of nuclear reactors informs our understanding of their corrosion behavior under irradiation. Isotopic labeling can also provide unique insights into the surface exchange reactions and defect chemistry of electrocatalysts. For instance, tracking the change in 18 O concentration at the surface of an epitaxial LaNiO 3 thin film after the electrocatalytic oxygen evolution reaction revealed the participation of lattice oxygen, confirming a hypothesis that had been proposed previously. Lastly, we highlight a new direction wherein we perform in situ processing studies utilizing isotopic tracers in conjunction with model epitaxial thin films within the atom probe tomography instrument. Additionally, this Account illustrates the great potential of isotopic engineering to enable fundamental mechanistic insights into physical processes and engineer functional properties in epitaxial films, heterostructures, and superlattices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Improved Annotation of Untargeted Metabolomics Data through Buffer Modifications That Shift Adduct Mass and Intensity

Annotation of untargeted high-resolution full-scan LC-MS metabolomics data remains challenging due to individual metabolites generating multiple LC-MS peaks arising from isotopes, adducts and fragments. Adduct annotation is a particular challenge, as the same mass difference between peaks can arise from adduct formation, fragmentation, or different biological species. To address this, here we describe a Buffer Modification Workflow (BMW), in which the same sample is run by LC-MS in both liquid chromatography solvent with 14 NH 3 -acetate buffer, and in solvent with the buffer modified with 15 NH 3 -formate. Buffer switching results in characteristic mass and signal intensity changes for adduct peaks, facilitating their annotation. This relatively simple and convenient chromatography modification annotated yeast metabolomics data with similar effectiveness to growing the yeast in isotope-labeled media. Application to mouse liver data annotated both known metabolite and known adduct peaks with 95% accuracy. Altogether, it identified 26% of ~ 27,000 liver LC-MS features as putative metabolites, of which ~ 2600 showed HMDB or KEGG database formula match. This workflow is well-suited to biological samples that cannot be readily isotope labeled, including plants, mammalian tissues, and tumors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Automated Coupling of Nanodroplet Sample Preparation with Liquid Chromatography–Mass Spectrometry for High-Throughput Single-Cell Proteomics

Single-cell proteomics can provide critical biological insight into the cellular heterogeneity that is masked by bulk-scale analysis. Here, we have developed a nanoPOTS (nanodroplet processing in one pot for trace samples) platform and demonstrated its broad applicability for single-cell proteomics. However, because of nanoliter-scale sample volumes, the nanoPOTS platform is not compatible with automated LC-MS systems, which significantly limits sample throughput and robustness. To address this challenge, we have developed a nanoPOTS autosampler allowing fully automated sample injection from nanowells to LC-MS systems. We also developed a sample drying, extraction, and loading workflow to enable reproducible and reliable sample injection. The sequential analysis of 20 samples containing 10 ng tryptic peptides demonstrated high reproducibility with correlation coefficients of >0.995 between any two samples. The nanoPOTS autosampler can provide analysis throughput of 9.6, 16, and 24 single cells per day using 120, 60, and 30 min LC gradients, respectively. As a demonstration for single-cell proteomics, the autosampler was first applied to profiling protein expression in single MCF10A cells using a label-free approach. At a throughput of 24 single cells per day, an average of 256 proteins was identified from each cell and the number was increased to 731 when the Match Between Runs algorithm of MaxQuant was used. Using a multiplexed isobaric labeling approach (TMT-11plex), ~77 single cells could be analyzed per day. We analyzed 152 cells from three acute myeloid leukemia cell lines, resulting in a total of 2558 identified proteins with 1465 proteins quantifiable (70% valid values) across the 152 cells. These data showed quantitative single-cell proteomics can cluster cells to distinct groups and reveal functionally distinct differences.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

13 C-Isotope-Assisted Assessment of Metabolic Quenching During Sample Collection from Suspension Cell Cultures

Metabolomics and fluxomics are core approaches to directly profile and interrogate cellular metabolism in response to various genetic or environmental perturbations. In order to accurately measure the abundance and isotope enrichment of intracellular metabolites, cell culture samples must be rapidly harvested and cold-quenched to preserve the in vivo metabolic state of the cells at the time of sample collection. When dealing with suspension cultures, this process is complicated by the need to separate the liquid culture media from cellular biomass prior to metabolite extraction. Here, we examine the efficacy of several commonly used metabolic quenching methods, using the model cyanobacterium Synechocystis sp. PCC 6803 as an example. Multiple 13 C-labeled compounds, including 13 C-bicarbonate, 13 C-glucose and 13 C-glutamine, were used as tracers during the sample collection and cold-quenching process to assess the extent of metabolic turnover after cells were harvested from culture flasks. We show that the combination of rapid filtration followed by 100% cold (–80°C) methanol quenching exhibits the highest quenching efficiency, while mixing cell samples with a partially frozen 30% methanol slurry (–24°C) followed by centrifugation is slightly less effective at quenching metabolism but enables less laborious sample processing. By contrast, rapidly mixing the cells with a saline ice slurry (~0°C) is less effective as indicated by high isotope-labeling rates after sample harvest, while mixing the cells with 60% cold methanol (–65°C) prior to centrifugation causes significant metabolite loss. Furthermore, this study demonstrates a rigorous, quantitative, and broadly applicable method for assessing the metabolic quenching efficacy of protocols used for sample collection in metabolomics and fluxomics studies.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Mass Spectrometry-Based High-Throughput Quantification of Bioproducts in Liquid Culture

To meet the ever-increasing need for high-throughput screening in metabolic engineering, information-rich, fast screening methods are needed. Mass spectrometry (MS) provides an efficient and general approach for metabolite screening and offers the capability of characterizing a broad range of analytes in a label-free manner, but often requires a range of sample clean-up and extraction steps. Liquid extraction surface analysis (LESA) coupled MS is an image-guided MS surface analysis approach that directly samples and introduces metabolites from a surface to MS. Here, we combined the advantages of LESA–MS and an acoustic liquid handler with stable isotope-labeled internal standards. This approach provides absolute quantitation of target chemicals from liquid culture-dried droplets and enables high-throughput quantitative screening for microbial metabolites. In this paper, LESA–MS was successfully applied to quantify several different metabolites (itaconic acid, triacetic acid lactone, and palmitic acid) from different yeast strains in different mediums, demonstrating its versatility, accuracy, and efficiency across a range of microbial engineering applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Laser Ablation Molecular Isotopic Spectrometry for Molecules Formation Chemistry in Femtosecond-Laser Ablated Plasmas

Recently, laser ablated molecular isotopic spectrometry (LAMIS) has expanded its capability to explore molecules formation mechanism in laser-induced plasma in addition to isotope analysis. LAMIS is a powerful tool for tracking the origination of atoms that is involved in formation of investigated molecules by labeling atoms with their isotopic substitution. The evolutionary formation pathways of organic molecules, especially of C 2 dimers and CN radicals, were frequently reported. However, very little is known about the formation pathways for metallic radicals and heterodimers in laser ablated plasma. This research focuses on elucidating the formation pathways of AlO radicals in femtosecond laser ablated plasma from 18 O-labeled Al 2 O 3 pellet. Plasmas expanding with strong forward bias in the direction normal to the sample surface were generated in the wake of a weakly ionized channel created by a femtosecond laser. The formation mechanism of AlO and influence of air were investigated with multiple plasma diagnostic methods such as monochromatic fast gating imaging, spatiotemporal resolved optical emission spectroscopy, and LAMIS. An advanced LAMIS fitting procedure was used to deduce the spatiotemporal distributions of Al 18 O and Al 16 O number densities and also their ratios. We found that the Al 16 O/Al 18 O number density ratio is higher for plasma portion closer to the sample surface, which suggests that chemical reactions between the plasma plume and ambient air are more intense at the tail of the plasma. The results also reveals that direct association of free Al and O atoms is the main mechanism for the formation of AlO at the early stage of the plasma. Finally, to the contrast, chemical reactions between plasma materials and ambient oxygen molecules and the isotope exchange effect are the dominant mechanisms of the formation of AlO and evolution of Al 16 O/Al 18 O number density ratio at the late stage of the plasma.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Solid-State NMR Studies Reveal Native-like β-Sheet Structures in Transthyretin Amyloid

Structural characterization of amyloid rich in cross-β structures is crucial for unraveling the molecular basis of protein misfolding and amyloid formation associated with a wide range of human disorders. Elucidation of the β-sheet structure in noncrystalline amyloid has, however, remained an enormous challenge. Here we report structural analyses of the β-sheet structure in a full-length transthyretin amyloid using solid-state NMR spectroscopy. Magic-angle-spinning (MAS) solid-state NMR was employed to investigate native-like β-sheet structures in the amyloid state using selective labeling schemes for more efficient solid-state NMR studies. Analyses of extensive long-range 13 C- 13 C correlation MAS spectra obtained with selectively 13 CO- and 13 Cα-labeled TTR reveal that the two main β-structures in the native state, the CBEF and DAGH β-sheets, remain intact after amyloid formation. The tertiary structural information would be of great use for examining the quaternary structure of TTR amyloid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Cofactor Complexes of DesD, a Model Enzyme in the Virulence-related NIS Synthetase Family

The understudied nonribosomal-peptide-synthetase-independent siderophore (NIS) synthetase family has been increasingly associated with virulence in bacterial species due to its key role in the synthesis of hydroxamate and carboxylate "stealth" siderophores. We have identified a model family member, DesD, from Streptomyces coelicolor , to structurally characterize using a combination of a wild-type and a Arg306Gln variant in apo , cofactor product AMP-bound, and cofactor reactant ATP-bound complexes. The kinetics in the family has been limited by solubility and reporter assays, so we have developed a label-free kinetics assay utilizing a single-injection isothermal-titration-calorimetry-based method. We report second-order rate constants that are 50 times higher than the previous estimations for DesD. Our Arg306Gln DesD variant was also tested under identical buffer and substrate conditions, and its undetectable activity was confirmed. These are the first reported structures for DesD, and they describe the critical cofactor coordination. This is also the first label-free assay to unambiguously determine the kinetics for an NIS synthetase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A Review of Biodegradable Plastics: Chemistry, Applications, Properties, and Future Research Needs

Environmental concerns over waste plastics’ effect on the environment are leading to the creation of biodegradable plastics. Biodegradable plastics may serve as a promising approach to manage the issue of environmental accumulation of plastic waste in the ocean and soil. Biodegradable plastics are the type of polymers that can be degraded by microorganisms into small molecules (e.g., H 2 O, CO 2 , and CH 4 ). However, there are misconceptions surrounding biodegradable plastics. For example, the term “biodegradable” on product labeling can be misconstrued by the public to imply that the product will degrade under any environmental conditions. Such misleading information leads to consumer encouragement of excessive consumption of certain goods and increased littering of products labeled as “biodegradable”. Here this review not only provides a comprehensive overview of the state-of-the-art biodegradable plastics but also clarifies the definitions and various terms associated with biodegradable plastics, including oxo-degradable plastics, enzyme-mediated plastics, and biodegradation agents. Analytical techniques and standard test methods to evaluate the biodegradability of polymeric materials in alignment with international standards are summarized. The review summarizes the properties and industrial applications of previously developed biodegradable plastics and then discusses how biomass-derived monomers can create new types of biodegradable polymers by utilizing their unique chemical properties from oxygen-containing functional groups. The terminology and methodologies covered in the paper provide a perspective on directions for the design of new biodegradable polymers that possess not only advanced performance for practical applications but also environmental benefits.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Root carbon interation with soil minerals is dynamic, leaving a legacy of microbially derived residues

Minerals preserve the oldest most persistent soil carbon, and mineral characteristics appear to play a critical role in the formation of soil organic matter (SOM) associations. To test the hypothesis that carbon source and soil microorganisms also influence mineral-SOM associations, we incubated permeable minerals bags in soil microcosms with and without plants, in a 13CO2 labelling chamber. Mineral bags contained quartz, ferrihydrite, kaolinite, or native soil minerals isolated via density separation. Using 13C-NMR, FTICR-MS, and lipidomics, we traced plant-derived carbon onto minerals harvested from microcosms at three plant growth stages, characterizing total carbon, 13C enrichment, and SOM chemistry. While C accumulation was rapid and mineral-dependent, the accumulated amount was not significantly affected by the presence of plant roots. However, the rhizosphere did shape the chemistry of mineral-associated SOM. Minerals incubated in the rhizosphere were associated with a more diverse array of compounds with different C functional groups (carbonyl, aromatics, carbohydrates, lipids) than minerals incubated in a bulk soil control. These diverse rhizosphere-derived compounds may represent a “transient fraction” of mineral SOM, rapidly exchanging with mineral surfaces. Our results also suggest that many of the lipids which persist on minerals are microbially-derived with a large fraction of fungal lipids.

Rhizosphere, soil organic matter, grassland, 13C-N↗
DOE OSTI2026

Quantitative DNA Stable Isotope Probing Identifies Active Microorganisms Assimilating Volatile Fatty Acids in Full-Scale Enhanced Biological Phosphorus Removal Processes

Enhanced biological phosphorus removal (EBPR) systems often rely on exogenous carbon sources, such as volatile fatty acids (VFAs), to achieve higher P removal. Here, we employed DNA quantitative stable isotope probing (qSIP) using two VFAs, acetate and propionate, in cyclic anaerobic/aerobic incubations to assess their effects on P cycling and microbial activity with biomass from two full-scale EBPR water resource-recovery facilities that utilize VFA addition. We found that anaerobic VFA uptake preferences differed within known groups of PAOs, such as Candidatus Accumulibacter and Tetrasphaera-affiliated members (e.g., Ca. Phosphoribacter), between the two biomasses. The combination of qSIP with metagenomics identified isotopically labeled phages that were linked to active PAOs, highlighting their potential roles in modulating EBPR community composition and activity. The highest levels of anaerobic labeling from acetate were in genomes belonging to Saccharimonadales and Rickettsiales, which are generally host-associated with bacteria and eukaryotes, respectively. Furthermore, this finding highlights the possibility of cross-feeding between PAO hosts and their parasites or predators, as well as the role of so-far uncharacterized organisms participating in carbon cycling under EBPR conditions. Collectively, these results expand our understanding of the ecological interactions involved in communities anaerobically uptaking VFAs and cycling P that are central to EBPR.

Polyphosphate accumulating organisms↗
DOE OSTI2019

Quantifying the Role of the Relative Humidity-Dependent Physical State of Organic Particulate Matter in the Uptake of Semivolatile Organic Molecules

The uptake of gas-phase dicarboxylic acids to organic particulate matter (PM) was investigated to probe the role of the PM physical state in exchange processes between gas-phase semivolatile organic molecules and organic PM. A homologous series of probe molecules, specifically isotopically labeled 13C-dicarboxylic acids, was used in conjunction with aerosol mass spectrometry to obtain a quantitative characterization of the uptake to organic PM for different relative humidities (RHs). The PM was produced by the dark ozonolysis of unlabeled α-pinene. The uptake of 13C-labeled oxalic, malonic, and α-ketoglutaric acids increased stepwise by 5 to 15 times with increases in RH from 15 to 80%. The enhanced uptake with increasing RH was explained primarily by the higher molecular diffusivity in the particle phase, as associated with changes in the physical state of the organic PM from a nonliquid state to a progressively less-viscous liquid state. At high RH, the partitioning of the probe molecules to the particle phase was more associated with physicochemical interactions with the organic PM than that with the co-absorbed liquid water. Additionally, uptake of the probe molecules also increased with a decrease in volatility along the homologous series. This study quantitatively shows the key roles of the particle physical state in governing the interactions of organic PM with semivolatile organic molecules.

42 ENGINEERING↗
DOE OSTI2020

Probing the Electronic Structure of a Thorium Nitride Complex by Solid-State 15N NMR Spectroscopy

The solid-state 15N NMR powder spectra of the thorium nitride complex, [K(18-crown-6)(THF)2][(R2N)3Th(m-15N)(Th(NR2)3] ([K][1-15N], R = SiMe3), and the thorium amide complex, [Th(NR2)3(15NH2)] (2-15N) were recorded. The spectrum for [K][1-15N] represents the first reported solid-state 15N NMR data for an actinide nitride complex. The experimentally measured tensor spans are 847 ppm for [K][1-15N] and 237 ppm for 2-15N. Both shielding tensors exhibit a near-zero asymmetry parameter, which for [K][1-15N] is consistent with a local rotational symmetry of its 15N-labelled nitride ligand. For 2-15N, the lack of asymmetry can be rationalized by a quasi-free Th-NH2 bond rotation in the solid-state. DFT calculations overestimate the tensor span somewhat for [K][1-15N], but provide isotropic shifts in good agreement with both the solid-state and solution values for both complexes. Natural localized molecular orbital (NLMO) analyses of the nuclear shielding reveal that the larger tensor span in [K][1-15N] vs. 2-15N is primarily a consequence of more pronounced covalency of the N-Th bonds, and large spin-orbit coupling due to significant Th 5f orbital contribution to those bonds, impacting the principal components of the shielding tensor perpendicular to the Th-N-Th axis. Overall, our analysis confirms the involvement of the 5f orbitals in Th-N multiple bonds, and further demonstrates the value of solid-state NMR spectroscopy for interrogating actinide-ligand bonding.

actinides, covalent bonding, Nuclear Magnetic Reso↗
DOE OSTI2022

Gamma-Ray-Induced Formation of Uranyl Peroxide Cage Clusters

Aqueous solutions of lithium uranyl triperoxide, Li 4 [UO 2 (O 2 ) 3 ] (LiUT), were irradiated with gamma rays at room temperature and found to form the uranyl peroxide cage cluster, Li 24 [(UO 2 )(O 2 )(OH)] 24 (Li–U 24 ). Raman spectroscopy and 18 O labeling were used to identify the Raman-active vibrations of LiUT. With these assignments, the concentration of LiUT was tracked as a function of radiation dose. A discrepancy between monomer removal and cluster formation suggests that the reaction proceeds by the assembly of an intermediate. Non-negative matrix factorization was used to separate Raman spectra into components and resulted in the identification of a unique intermediate species. Much of the conversion appears to be driven by water radiolysis products, particularly the hydroxyl radical. Furthermore, this differs from the 18 O-labeled copper-catalyzed formation of U 24 , which progresses at a steady rate with no observation of intermediates. Li–U 24 in solution decomposes at high radiation doses resulting in a solid insoluble product similar to Na-compreignacite, Na 2 (UO 2 ) 6 O 4 (OH) 6 ·7H 2 O, which contains uranyl oxyhydroxy sheets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

QuantumScents: Quantum-Mechanical Properties for 3.5k Olfactory Molecules

Quantitative structure–odor relationships are critically important for studies related to the function of olfaction. Current literature data sets contain expert-labeled molecules but lack feature data. This paper introduces QuantumScents, a quantum mechanics augmented derivative of the Leffingwell data set. QuantumScents contains 3.5k structurally and chemically diverse molecules ranging from 2 to 30 heavy atoms (CNOS) and their corresponding 3D coordinates, total PBE0 energy, molecular dipole moment, and per-atom Hirshfeld charges, dipoles, and ratios. The authors demonstrate that Hirshfeld charges and ratios contain sufficient information to perform molecular classification by training a Message Passing Neural Network with chemprop (Heid, E.; et al. ChemRxiv, 2023, DOI: 10.26434/chemrxiv-2023-3zcfl) to predict scent labels. Finally, the QuantumScents data set is freely available on Zenodo along with the authors’ code, example models, and data set generation workflow (https://zenodo.org/doi/10.5281/zenodo.8239853).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Synthesis and Evaluation of a Bifunctional Chelator for Thorium-227 Targeted Radiotherapy

Thorium-227 (227Th) is an α-emitting radionuclide currently under investigation for targeted alpha therapy. Available chelators used for this isotope suffer from challenging multistep syntheses. Here, we present the synthesis and preclinical evaluation of a novel bifunctional chelator, p-SCN-Bn-DOTHOPO, which contains an isothiocyanate group that is suitable for conjugation to biological molecules. This bifunctional chelator was prepared with a 26% overall yield in four steps and conjugated to the human epidermal growth factor receptor 2 targeting antibody, trastuzumab. The resulting immunoconjugate was labeled with [227Th]ThIV (pH 5.5, room temperature, 60 min) with ≥95% radiochemical yield and purity. The conjugate was also labeled with zirconium-89 (89Zr), which can be used for positron emission tomography imaging. The radiometal complexes were subsequently investigated for their biological stability. The results described here provide insight into ligand design strategies and optimization of chelators for the development of the next generation of 89Zr and 227Th radiopharmaceuticals.

Thorium↗
DOE OSTI2022

Synthesis of β-Deuterated Amino Acids via Palladium-Catalyzed H/D Exchange

Despite several synthetic approaches that have been developed for α-deuterated amino acids, the synthesis of β-deuterated amino acids has remained a challenge. Herein, we disclose a palladium catalyzed H/D exchange protocol for a β-deuterated N-protected amino amide, which can be converted to a β-deuterated amino acid simply by removal of protecting groups. Further, this protocol is highly efficient, simply manipulated, and appliable for deuterium-labeling of many amino amides. In addition, deuterium labeling of phenylalanine derivatives was also successful when pivalic acid served as an additive to promote the H/D exchange process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗