Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Manufacture, microstructure and mechanical properties of Mo-W-N nanostructured hard films

Mo{sub 1-x}W{sub x}N{sub y} (x = 0-0.67) hard films were fabricated on wafers of silicon and high speed steel by dc magnetron sputtering technique. The effect of tungsten concentration on the phase composition, microstructure, surface morphology, hardness, adhesion, and corrosion resistance of the films was studied by X-ray diffraction, scanning electron microscopy, nano-indentation, and scratch test. It was found that if the W concentration (x) in the film is in the range of 0-0.52, the films exhibit fcc (Mo,W)N{sub y} single phase where larger W atoms substituted Mo atoms in fcc MoN{sub y}. At higher x values (x > 0.52) the films exhibit a two-phase structure consisting of fcc (Mo,W)N{sub y} and pure bcc tungsten phase. The hardness of the Mo{sub 1-x}W{sub x}N{sub y} films increases at first with increasing x, and then decreases after passing a maximum. The maximum hardness of 47 GPa is obtained at x = 0.37 corresponding to an adhesion strength of 60 N. The Mo-W-N coated high speed steel has a lower corrosion current density and higher corrosion potential than the bare high speed steel substrates.

36 MATERIALS SCIENCE↗

Electronic structure of LiCoO{sub 2} thin films: A combined photoemission spectroscopy and density functional theory study

The electronic properties of LiCoO{sub 2} have been studied by theoretical band-structure calculations (using density functional theory) and experimental methods (photoemission). Synchrotron-induced photoelectron spectroscopy, resonant photoemission spectroscopy (ResPES), and soft x-ray absorption (XAS) have been applied to investigate the electronic structure of both occupied and unoccupied states. High-quality PES spectra were obtained from stoichiometric and highly crystalline LiCoO{sub 2} thin films deposited ''in situ'' by rf magnetron sputtering. An experimental approach of separating oxygen- and cobalt-derived (final) states by ResPES in the valence-band region is presented. The procedure takes advantage of an antiresonant behavior of cobalt-derived states at the 3p-3d excitation threshold. Information about the unoccupied density of states has been obtained by O K XAS. The structure of the Co L absorption edge is compared to semiempirical charge-transfer multiplet calculations. The experimental results are furthermore compared with band-structure calculations considering three different exchange potentials [generalized gradient approximation (GGA), using a nonlocal Hubbard U (GGA+U) and using a hybrid functional (Becke, three-parameter, Lee-Yang-Parr [B3LYP])]. For these different approaches total density of states and partial valence-band density of states have been investigated. The best qualitative agreement with experimental results has been obtained by using a GGA+U functional with U=2.9 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Induced polarized state in intentionally grown oxygen deficient KTaO{sub 3} thin films

Deliberately oxygen deficient potassium tantalate thin films were grown by RF magnetron sputtering on Si/SiO{sub 2}/Ti/Pt substrates. Once they were structurally characterized, the effect of oxygen vacancies on their electric properties was addressed by measuring leakage currents, dielectric constant, electric polarization, and thermally stimulated depolarization currents. By using K{sub 2}O rich KTaO{sub 3} targets and specific deposition conditions, KTaO{sub 3-{delta}} oxygen deficient thin films with a K/Ta = 1 ratio were obtained. Room temperature X-ray diffraction patterns show that KTaO{sub 3-{delta}} thin films are under a compressive strain of 2.3% relative to KTaO{sub 3} crystals. Leakage current results reveal the presence of a conductive mechanism, following the Poole-Frenkel formalism. Furthermore, dielectric, polarization, and depolarization current measurements yield the existence of a polarized state below T{sub pol} {approx} 367 Degree-Sign C. A Cole-Cole dipolar relaxation was also ascertained apparently due to oxygen vacancies induced dipoles. After thermal annealing the films in an oxygen atmosphere at a temperature above T{sub pol}, the aforementioned polarized state is suppressed, associated with a drastic oxygen vacancies reduction emerging from annealing process.

36 MATERIALS SCIENCE↗

Epitaxial growth of tungsten layers on MgO(001)

Smooth single crystal W(001) layers were grown on MgO(001) substrates by magnetron sputtering at 900 °C. X-ray diffraction ω–2θ scans, ω-rocking curves, pole figures, and reciprocal space maps indicate a 45°-rotated epitaxial relationship: (001){sub W}‖(001){sub MgO} and [010]{sub W}‖[110]{sub MgO}, and a relaxed lattice constant of 3.167 ± 0.001 nm. A residual in-plane biaxial compressive strain is primarily attributed to differential thermal contraction after growth and decreases from −0.012 ± 0.001 to −0.001 ± 0.001 with increasing layer thickness d = 4.8–390 nm, suggesting relaxation during cooling by misfit dislocation growth through threading dislocation glide. The in-plane x-ray coherence length increases from 3.4 to 33.6 nm for d = 4.8–390 nm, while the out-of-plane x-ray coherence length is identical to the layer thickness for d ≤ 20 nm, but is smaller than d for d ≥ 49.7 nm, indicating local strain variations along the film growth direction. X-ray reflectivity analyses indicate that the root-mean-square surface roughness increases from 0.50 ± 0.05 to 0.95 ± 0.05 nm for d = 4.8–19.9 nm, suggesting a roughness exponent of 0.38, but remains relatively constant for d > 20 nm with a roughness of 1.00 ± 0.05 nm at d = 47.9 nm.

36 MATERIALS SCIENCE↗

Thickness dependent structural, magnetic and magneto-transport properties of epitaxial Nd{sub 0.50}Sr{sub 0.50}MnO{sub 3} thin films

We report the thickness-dependent structural, magnetic and magneto-transport properties in epitaxial Nd{sub 0.50}Sr{sub 0.50}MnO{sub 3} thin films (10 to 300nm) prepared by DC magnetron sputtering technique on single crystalline (001) oriented substrate LaAlO{sub 3}. X-ray diffraction pattern reveals the epitaxial growth of all the films and the out-of-plane lattice parameter of films were found to increase with thickness. As thickness of the film increases the paramagnetic insulator (PMI) to ferromagnetic metal (FMM) transition temperature (T{sub C}), charge ordered transition temperature (T{sub CO}) and magnetic moment were found to increase with a strong bifurcation in ZFC-FC magnetization. The asymmetry in the coercivity seen in field dependent magnetization loops (M-H loops) suggests the presence of exchange bias (EB) effect. While temperature dependent resistivity of films show the semiconducting nature for thickness 10-200nm in temperature range from 5-300K, the film of thickness 300nm shows the insulator to metal transition with transition temperature (T{sub IM}) at 175K. Temperature dependent low field magnetoresistance (LFMR) measured at 4kOe found to decrease with thickness and for high field magnetoresistance (HFMR) at 40kOe and 60kOe also show similar dependence and a crossover at intermediate temperature range in the magnitude of MR between 10nm and 200nm films at constant field. Colossal increase in magnetoresistance observed for 10nm film at low temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth and Structural, Magnetic, and Magnetooptical Properties of ZnO Films Doped with a Fe{sup 57} 3d Impurity

ZnO films obtained by high-frequency magnetron sputtering and doped with a Fe{sup 57} metallic 3d impurity by the diffusion method are studied. The type of local environment of Fe{sup 57} impurity atoms on varying the deposition parameters of ZnO films is determined by Mössbauer spectroscopy. It is established that the ground state of Fe{sup 57} impurity atoms corresponds to metallic iron in the magnetically ordered state and there is a small fraction of Fe{sup 57} atoms with a local environment corresponding to the complex oxide Fe{sub 3}O{sub 4}, having the magnetically ordered state; there is also a fraction of iron atoms in the paramagnetic state. The magnetic and magnetooptical parameters of the films were measured using magnetooptic Kerr effect. The spectral dependences of the polar magnetooptic Kerr effect in ZnO(Fe{sup 57}) films are measured in a photon energy range of 1.5–4.5 eV and simulated by the effective-medium method. It is established that ZnO(Fe{sup 57}) possess an easy-plane magnetic anisotropy with a magnetization lying in the film plane.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Mn doping on the structural, optical, and magnetic properties of In{sub 2}O{sub 3} films

(In{sub 1−x}Mn{sub x}){sub 2}O{sub 3} films were grown by radio frequency-magnetron sputtering technique. Effect of Mn doping on the structural, optical, and magnetic properties of films is investigated systematically. The detailed structure analyses suggest that Mn ions substitute for In{sup 3+} sites of the In{sub 2}O{sub 3} lattice in the valence of +2 states, and Mn-related secondary phases or clusters as the source of ferromagnetism is safely ruled out. All films show typical room temperature ferromagnetism. The saturation magnetization M{sub s} increases first, and then decreases, while carrier concentration n{sub c} decreases monotonically with Mn doping, implying that the ferromagnetism is not directly induced by the mediated carriers. The optical bandgap E{sub g} of films decreases monotonically with the increase of Mn concentration, and there exists a linear functional dependence between E{sub g} and n{sub c}{sup 2/3}, which is consistent with Burstein-Moss shift arguments. It can be concluded that the ferromagnetic order in Mn-doped In{sub 2}O{sub 3} films is intrinsic, arising from Mn atoms substitution for the In sites of In{sub 2}O{sub 3} lattice. The oxygen vacancies play a mediation role on the ferromagnetic couplings between the Mn ions.

36 MATERIALS SCIENCE↗

Effect of interfacial interactions on the thermal conductivity and interfacial thermal conductance in tungsten–graphene layered structure

Graphene film was deposited by microwave plasma assisted deposition on polished oxygen free high conductivity copper foils. Tungsten–graphene layered film was formed by deposition of tungsten film by magnetron sputtering on the graphene covered copper foils. Tungsten film was also deposited directly on copper foil without graphene as the intermediate film. The tungsten–graphene–copper samples were heated at different temperatures up to 900 °C in argon atmosphere to form an interfacial tungsten carbide film. Tungsten film deposited on thicker graphene platelets dispersed on silicon wafer was also heated at 900 °C to identify the formation of tungsten carbide film by reaction of tungsten with graphene platelets. The films were characterized by scanning electron microscopy, Raman spectroscopy, and x-ray diffraction. It was found that tungsten carbide film formed at the interface upon heating only above 650 °C. Transient thermoreflectance signal from the tungsten film surface on the samples was collected and modeled using one-dimensional heat equation. The experimental and modeled results showed that the presence of graphene at the interface reduced the cross-plane effective thermal conductivity and the interfacial thermal conductance of the layer structure. Heating at 650 and 900 °C in argon further reduced the cross-plane thermal conductivity and interface thermal conductance as a result of formation nanocrystalline tungsten carbide at the interface leading to separation and formation of voids. The present results emphasize that interfacial interactions between graphene and carbide forming bcc and hcp elements will reduce the cross-plane effective thermal conductivity in composites.

36 MATERIALS SCIENCE↗

Effect of Substrate Temperature on Structural, Morphological, Magnetic, and Electrical Properties of Fe{sub 2}CoSi Heusler Alloy Thin Films for Spin-Based Device Applications

Fe{sub 2}CoSi based Heusler alloy thin films are deposited on single crystal Si (111) substrate at different substrate temperatures varying from room temperature to 600 °C using ultrahigh vacuum DC magnetron sputtering. Structural analysis of the prepared thin films is carried out using GI-XRD measurement and it conform ordered L2{sub 1} crystal structure of the films deposited at 450 °C and above. The atomic force microscopic (AFM) images of Fe{sub 2}CoSi thin films exhibiting 3D-like growth on Si (111) substrate at varying temperatures. The magnetic property of the thin films is studied using vibrating sample magnetometer (VSM). At 450 °C of substrate temperature, the prepared thin film exhibits high saturation magnetization (M{sub s} = 948 emu/cc) and low coercivity (H{sub c} = 8 Oe). The self-energy magnetization of the film and its own field is very high, when the temperature of the substrate was maintained at 450 °C and switching field ratio for this film was obtained as ~ 0.9 due to its high crystallinity and atomic ordering. The electrical property of Fe{sub 2}CoSi thin film is investigated using four-probe technique and a positive magnetoresistive behavior was observed for thin film deposited at a substrate temperature of 450 °C which indicates the possible half-metallic nature at room temperature. The enhanced magnetic and electrical properties obtained for the thin film prepared at 450 °C substrate temperature is highly suitable for spin based device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Novel hard, tough HfAlSiN multilayers, defined by alternating Si bond structure, deposited using modulated high-flux, low-energy ion irradiation of the growing film

Hf{sub 1−x−y}Al{sub x}Si{sub y}N (0 ≤ x ≤ 0.14, 0 ≤ y ≤ 0.12) single layer and multilayer films are grown on Si(001) at 250 °C using ultrahigh vacuum magnetically unbalanced reactive magnetron sputtering from a single Hf{sub 0.6}Al{sub 0.2}Si{sub 0.2} target in mixed 5%-N{sub 2}/Ar atmospheres at a total pressure of 20 mTorr (2.67 Pa). The composition and nanostructure of Hf{sub 1−x−y}Al{sub x}Si{sub y}N films are controlled by varying the energy E{sub i} of the ions incident at the film growth surface while maintaining the ion-to-metal flux ratio constant at eight. Switching E{sub i} between 10 and 40 eV allows the growth of Hf{sub 0.78}Al{sub 0.10}Si{sub 0.12}N/Hf{sub 0.78}Al{sub 0.14}Si{sub 0.08}N multilayers with similar layer compositions, but in which the Si bonding state changes from predominantly Si–Si/Si–Hf for films grown with E{sub i} = 10 eV, to primarily Si–N with E{sub i} = 40 eV. Multilayer hardness values, which vary inversely with bilayer period Λ, range from 20 GPa with Λ = 20 nm to 27 GPa with Λ = 2 nm, while fracture toughness increases directly with Λ. Multilayers with Λ = 10 nm combine relatively high hardness, H ∼ 24 GPa, with good fracture toughness.

36 MATERIALS SCIENCE↗

High temperature magnetic properties of Fe{sub 81-x}Co{sub x}Ga{sub 19}/Si(100) films

Fe{sub 81-x}Co{sub x}Ga{sub 19} (with x ranging from 0 to 19 at.% Co) films with thicknesses of about 110 nm were deposited on Si(100) substrates by the dc magnetron sputtering method. The structures of these films at room temperature (RT) were analyzed by x-ray diffraction. Magnetic hysteresis loops of each film were measured from room temperature (RT) to 800 deg. C, and their saturation magnetization (4{pi}M{sub S}) and coercivity (H{sub C}) were plotted as a function of temperature (T). Saturation magnetostriction ({lambda}{sub S}) at RT was also measured. The substitution of Co for Fe would give rise to increases in H{sub C} and {lambda}{sub S}. In terms of high temperature magnetic properties, (A) we find that for each film, there is one low-temperature-phase Curie point (T{sub C1}) and one high-temperature-phase Curie point (T{sub C2}); (B) based on the temperature dependence of 4{pi}M{sub S}, we calculated the reduced hyperbolic Bessel function I{sub 5/2}(T); from the relationship {lambda}{sub S}(T)=I{sub 5/2}(T)x{lambda}{sub S}(RT), we can compare the performances of {lambda}{sub S}(T) at higher temperatures; and (C) H{sub C} decreases slightly as T increases initially, but it reaches a maximum when either T{sub C1} or T{sub C2} is approached. It is concluded that the Fe{sub 62}Co{sub 19}Ga{sub 19} film has the optimal high-temperature magnetic properties, including a larger {lambda}{sub S}(T), higher T{sub C1}, and moderate H{sub C}(T).

36 MATERIALS SCIENCE↗

The effect of millisecond flash lamp annealing on electrical and structural properties of ZnO:Al/Si structures

The effect of millisecond flash lamp annealing (FLA) on aluminum doped ZnO (AZO) films and their interface with Si have been studied. The AZO films were deposited by magnetron sputtering on Si (100) substrates. The electrical and structural properties of the film and AZO/Si structures were characterized by current–voltage, capacitance–voltage, and deep level transient spectroscopy measurements, X-ray diffraction, and secondary ion mass spectrometry. The resistivity of the AZO film is reduced to a close to state-of-the-art value of 2 × 10{sup −4} Ω cm after FLA for 3 ms with an average energy density of 29 J/cm{sup 2}. In addition, most of the interfacial defects energy levels are simultaneously annealed out, except for one persisting shallow level, tentatively assigned to the vacancy-oxygen complex in Si, which was not affected by FLA. Subsequent to the FLA, the samples were treated in N{sub 2} or forming gas (FG) (N{sub 2}/H{sub 2}, 90/10%{sub mole}) ambient at 200–500 °C. The latter samples maintained the low resistivity achieved after the FLA, but not the former ones. The interfacial defect level persisting after the FLA is removed by the FG treatment, concurrently as another level emerges at ∼0.18 eV below the conduction band. The electrical data of the AZO films are discussed in term of point defects controlling the resistivity, and it is argued that the FLA promotes formation of electrically neutral clusters of Zink vacancies (V{sub Zn}'s) rather than passivating/compensating complexes between the Al donors and V{sub Zn}'s.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Recent development of the Multi-Grid detector for large area neutron scattering instruments

Most of the Neutron Scattering facilities are committed in a continuous program of modernization of their instruments, requiring large area and high performance thermal neutron detectors. Beside scintillators detectors, {sup 3}He detectors, like linear PSDs (Position Sensitive Detectors) and MWPCs (Multi-Wires Proportional Chambers), are the most current techniques nowadays. Time Of Flight instruments are using {sup 3}He PSDs mounted side by side to cover tens of m{sup 2}. As a result of the so-called '{sup 3}He shortage crisis{sup ,} the volume of 3He which is needed to build one of these instruments is not accessible anymore. The development of alternative techniques requiring no 3He, has been given high priority to secure the future of neutron scattering instrumentation. This is particularly important in the context where the future ESS (European Spallation Source) will start its operation in 2019-2020. Improved scintillators represent one of the alternative techniques. Another one is the Multi-Grid introduced at the ILL in 2009. A Multi-Grid detector is composed of several independent modules of typically 0.8 m x 3 m sensitive area, mounted side by side in air or in a vacuum TOF chamber. One module is composed of segmented boron-lined proportional counters mounted in a gas vessel; the counters, of square section, are assembled with Aluminium grids electrically insulated and stacked together. This design provides two advantages: First, magnetron sputtering techniques can be used to coat B{sub 4}C films on planar substrates, and second, the neutron position along the anode wires can be measured by reading out individually the grid signals with fast shaping amplifiers followed by comparators. Unlike charge division localisation in linear PSDs, the individual readout of the grids allows operating the Multi-Grid at a low amplification gain, hence this detector is tolerant to mechanical defects and its production accessible to laboratories equipped with standard equipment. Prototypes of different configurations and sizes have been developed and tested. A demonstrator, with a sensitive area of 0.8 m x 3 m, has been studied during the CRISP European project; it contains 1024 grids, and a surface of isotopically enriched B{sub 4}C film close to 80 m{sup 2}. Its size represented a challenge in terms of fabrication and mounting of the detection elements. Another challenge was to make the gas chamber mechanically compatible with operation in a vacuum TOF chamber. Optimal working condition of this detector was achieved by flushing Ar-CO{sub 2} at a pressure of 50 mbar, and by applying 400 Volts on the anodes. This unusual gas pressure allows to greatly simplifying the mechanics of the gas vessel in vacuum. The detection efficiency has been measured with high precision for different film thicknesses. 52% has been measured at 2.5 Angstrom, in good agreement with the MC simulation. A high position resolution has been achieved by centre of gravity measurement of the TOT (Time-Over-Threshold) signals between neighbouring grids. These results, as well as other detection parameters, including gamma sensitivity and spatial uniformity, will be presented. (author)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Thickness-Dependent Thermal Oxidation of Ni into NiO Thin Films

We report thickness-dependent thermal oxidation in Ni (t = 10–300 nm) thin films exposed to air annealing and the resulting vibrational, magnetic and electrical properties of Ni films deposited directly on thermally oxidized Si substrate using magnetron sputtering technique at ambient temperature. As-deposited Ni films exhibit face-centred cubic structure with fine crystals and large lattice constant (a{sub Ni}) at lower t (< 50 nm). With increasing t, a{sub Ni} decreases and approaches to bulk value. With increasing T{sub A}, a{sub Ni} not only decreases to bulk Ni due to improved crystallization but also reduces below bulk Ni for t > 50 due to formation of NiO. The relative fraction of Ni and NiO in annealed films up to 400 {sup ∘}C strongly depends on t. Annealing Ni films at 500 {sup ∘}C results into complete oxidation of Ni into granular-type NiO. X-ray reflectivity studies reveal that oxidation process occurs from surface of the films converting Ni into NiO possibly through layer by layer process, which is subtle to t. Raman spectra show that intensity ratio between one-phonon longitudinal optical (LO) and two-phonon LO bands decreases and intensity of two-magnon band increases with increasing t for films annealed at particular T{sub A}. This confirms the growth of NiO not only with increasing T{sub A}, but also with t. As-deposited films exhibit ferromagnetism at room temperature. The presence of Ni and NiO in annealed films implies coexistence of ferromagnetic and antiferromagnetic interactions, leading to tunable exchange bias (H{sub E}), whose magnitude strongly depends on the ratio between Ni and NiO. Electrical resistance (R) of the as-deposited Ni films decreases with increasing t and follows the Namba’s model. Upon annealing, R increases largely due to oxidation of Ni. The observed results are explained on the basis of thickness dependent thermal oxidation process with increasing T{sub A}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The n-type conduction of indium-doped Cu{sub 2}O thin films fabricated by direct current magnetron co-sputtering

Indium-doped Cu{sub 2}O thin films were fabricated on K9 glass substrates by direct current magnetron co-sputtering in an atmosphere of Ar and O{sub 2}. Metallic copper and indium disks were used as the targets. X-ray diffraction showed that the diffraction peaks could only be indexed to simple cubic Cu{sub 2}O, with no other phases detected. Indium atoms exist as In{sup 3+} in Cu{sub 2}O. Ultraviolet-visible spectroscopy showed that the transmittance of the samples was relatively high and that indium doping increased the optical band gaps. The Hall effect measurement showed that the samples were n-type semiconductors at room temperature. The Seebeck effect test showed that the films were n-type semiconductors near or over room temperature (<400 K), changing to p-type at relatively high temperatures. The conduction by the samples in the temperature range of the n-type was due to thermal band conduction and the donor energy level was estimated to be 620.2–713.8 meV below the conduction band. The theoretical calculation showed that indium doping can raise the Fermi energy level of Cu{sub 2}O and, therefore, lead to n-type conduction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fast X-ray Nanotomography with Sub-10 nm Resolution as a Powerful Imaging Tool for Nanotechnology and Energy Storage Applications

In the last decade, transmission X-ray microscopes (TXMs) have come into operation in most of the synchrotrons worldwide. They have proven to be outstanding tools for non-invasive ex and in situ 3D characterization of materials at the nanoscale across varying range of scientific applications. However, their spatial resolution has not improved in many years, while newly developed functional materials and microdevices with enhanced performances exhibit nanostructures always finer. Here, optomechanical breakthroughs leading to fast 3D tomographic acquisitions (85 min) with sub-10 nm spatial resolution, narrowing the gap between X-ray and electron microscopy, are reported. These new achievements are first validated with 3D characterizations of nanolithography objects corresponding to ultrahigh-aspect-ratio hard X-ray zone plates. Then, this powerful technique is used to investigate the morphology and conformality of nanometer-thick film electrodes synthesized by atomic layer deposition and magnetron sputtering deposition methods on 3D silicon scaffolds for electrochemical energy storage applications.

36 MATERIALS SCIENCE↗

Controlled Growth of Single‐Crystal Graphene Wafers on Twin‐Boundary‐Free Cu(111) Substrates

Single-crystal graphene (SCG) wafers are needed to enable mass-electronics and optoelectronics owing to their excellent properties and compatibility with silicon-based technology. Controlled synthesis of high-quality SCG wafers can be done exploiting single-crystal Cu(111) substrates as epitaxial growth substrates recently. However, current Cu(111) films prepared by magnetron sputtering on single-crystal sapphire wafers still suffer from in-plane twin boundaries, which degrade the SCG chemical vapor deposition. Here, in this study, it is shown how to eliminate twin boundaries on Cu and achieve 4 in. Cu(111) wafers with ≈95% crystallinity. The introduction of a temperature gradient on Cu films with designed texture during annealing drives abnormal grain growth across the whole Cu wafer. In-plane twin boundaries are eliminated via migration of out-of-plane grain boundaries. SCG wafers grown on the resulting single-crystal Cu(111) substrates exhibit improved crystallinity with >97% aligned graphene domains. As-synthesized SCG wafers exhibit an average carrier mobility up to 7284 cm 2 V −1 s −1 at room temperature from 103 devices and a uniform sheet resistance with only 5% deviation in 4 in. region.

36 MATERIALS SCIENCE↗

Direct Release of Sombrero-Shaped Magnetite Nanoparticles via Nanoimprint Lithography

Magnetic nanoparticles produced via nanoimprint lithography can change the current paradigm of fabrication processes from chemical “bottom-up” synthesis to “top-down” fabrication. The combination of controlled nondirectional magnetron sputtering, ETFE mold, bilayer lift-off, and dry etching release can control the shape, size, and structure of the fabricated nanoparticles. The resulting magnetic nanoparticles have a novel “sombrero” shape with complex and unique physical/magnetic properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗