Search NASA⌕ Search

SEARCH · Search NASA

Results for “Measuring instruments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Determination of instrumentation errors from measured data using maximum likelihood method

The maximum likelihood method is used for estimation of unknown initial conditions, constant bias and scale factor errors in measured flight data. The model for the system to be identified consists of the airplane six-degree-of-freedom kinematic equations, and the output equations specifying the measured variables. The estimation problem is formulated in a general way and then, for practical use, simplified by ignoring the effect of process noise. The algorithm developed is first applied to computer generated data having different levels of process noise for the demonstration of the robustness of the method. Then the real flight data are analyzed and the results compared with those obtained by the extended Kalman filter algorithm.

Keskar, D. A.↗

Cloud particle effects on laminar flow and instrumentation for their measurement aboard a NASA LFC aircraft

Fuel costs account now for approximately 60 percent of the direct operating costs of airlines and future commercial transport will utilize advanced technologies for saving fuel on the basis of drag reduction. Laminar flow control (LFC) represents such an advanced technology. A new laminar flow wing on a reconfigured WB-66 aircraft was tested in the X-21 flight program. The tests confirmed that extensive laminar flow could be achieved at subsonic transport cruise conditions. Factors affecting adversely the maintenance of laminar flow were found to be related to ice particles encountered during the penetration of cirrus clouds or haze. The present investigation is concerned with the effect of ice particles on LFC, taking into account the results obtained in the Leading Edge Flight Test (LEFT) being conducted by NASA. Attention is given to ice particle measurements in the LEFT program.

Davis, R. E.↗

A comparison of turbulence intensity measurements using a laser velocimeter and a hot wire in a low speed jet flow

The study involves a simultaneous measurement with both instruments along radial scans at two axial locations in the jet exiting from the turbulent pipe and an axial scan at the 75-percent radial location in the jet from the convergent nozzle. The results suggest that, within the limits of flow stationarity, both instruments yield measurements in good agreement, + or - 0.8-percent in turbulence intensity, below a turbulence intensity (the ensemble standard deviation divided by the local mean velocity) of 20 percent. From turbulence intensities of 20 percent to a maximum of 75 percent, the measurements exhibit the same trends; for reasons discussed here, however, the comparisons are not of the quality as those below 20 percent. It is found that correcting the turbulence intensity data for velocity bias errors increases the results by an average of 2 percent in turbulence intensity above the hot wire results and the uncorrected laser velocimeter data. The results are seen as calling into question the validity of using the velocity bias correction and time average techniques for turbulence intensity measurements.

Meyers, J. F.↗

The ALICE instrument and the measured cosmic ray elemental abundances

A Large Isotopic Composition Experiment (ALICE) is a balloon-borne spectrometer which can determine the elemental and isotopic composition of galactic cosmic rays with energies near 1 GeV/nucleon. ALICE was flown from Prince Albert, Canada in August 1987, and remained at float altitude (120,000 feet) for 14.7 hours. In this paper, we describe the experimental methods and analysis which will be used for subsequent isotopic analysis. We obtained very precise charge resolution over the entire designed range: 0.10 and 0.16 charge units at neon and iron, respectively. Results on the galactic cosmic ray abundances and absolute fluxes of the elements from neon through nickel are reported.

Esposito, J. A.↗

Accuracy of total ozone retrieval from NOAA SBUV/2 measurements: Impact of instrument performance

The National Oceanic and Atmospheric Administration/National Environmental Satellite Data and Information Service (NOAA/NESDIS) has been collecting and evaluating the solar backscattered ultraviolet (SBUV/2) instrument data from NOAA 9 and NOAA 11 spacecraft since March 1985. Over 5 years (March 1985 to October 1990) of NOAA 9 (version 5.0) and over 4 years (January 1989 to June 1993) of NOAA 11 (version 6.0) reprocessed data are now available to the scientific community to study geophysical phenomena involving ozone. This paper examines the impact of the instrument performance on total ozone retrieval from the two instruments. We estimate that at the end of October 1990 the total postlaunch error for NOAA 9 due to instrument alone is -2.2%. A significant fraction of this error (-1.9%) is due to diffuser degradation which is not accounted for in the version 5 reprocessing. The estimate for NOAA 11 total postlaunch instrument error, at the end of June 1993, is -0.4%.

Ahmad, Z.↗

Data archive for NO(y) from observations and construction and testing of airborne instrument for simultaneous measurement of NO, NO2, NO(y), and O3

The compilation and archiving of NO(x) and NO(y) measurements began in mid-March 1994. Since the submission of the first report, data summaries have been obtained for the TROPOZ 2, STRATOZ 3, OCTA and TOR/Schauinsland campaigns, and the full data sets will become a part of this archive in the near future. Climatologies of NO(x) and NO(y) have been developed from these and previously archived data sets, including the available GTE campaigns (ABLE-2A, B, -3A, B, CITE-2, -3, TRACE-A, PEM WEST-A) and AASE 1 and 2. The data have been grouped by season and altitude (boundary layer and 3 km ranges in the free troposphere). Maps showing median values of midday NO, NO(x) and NO(y) have been produced for each season for the boundary layer and 3 km ranges of the free troposphere. The statistics of the data (median, mean, and standard deviation, central 67% and 90%) have also been determined, and are shown in representative figures included in this report.

Carroll, Mary Anne↗

FOXSI-2 Solar Microflares: Multi-Instrument Differential Emission Measure Analysis

Outline: Overview of FOXSI-2 (Focusing Optics X-ray Solar Imager) coordinated microflare observations with Hinode/XRT (X-Ray Telescope) and SDO/AIA (Solar Dynamics Observatory/Atmospheric Imaging Assembly); Temperature response functions for FOXSI-2, XRT and AIA; Combined Differential Emission Measure (DEM) analysis - to determine the amount of plasma in the line of sight that emits the radiation as a function of temperature; Thermal energy released during the microflares; Summary.

Athiray, P. S.↗

Compressive Sensing Based Space Flight Instrument Constellation for Measuring Gravitational Microlensing Parallax

In this work, we provide a compressive sensing architecture for implementing on a space based observatory for detecting transient photometric parallax caused by gravitational microlensing events. Compressive sensing (CS) is a simultaneous data acquisition and compression technique, which can greatly reduce on-board resources required for space flight data storage and ground transmission. We simulate microlensing parallax observations using a space observatory constellation, based on CS detectors. Our results show that average CS error is less than 0.5% using 25% Nyquist rate samples. The error at peak magnification time is significantly lower than the error for distinguishing any two microlensing parallax curves at their peak magnification. Thus, CS is an enabling technology for detecting microlensing parallax, without causing any loss in detection accuracy.

compressive sensing↗