Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microscopic simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Modeling inter‐reader variability in clinical target volume delineation for soft tissue sarcomas using diffusion model

Abstract Background Accurate delineation of the clinical target volume (CTV) is essential in the radiotherapy treatment of soft tissue sarcomas. However, this process is subject to inter‐reader variability due to the need for clinical assessment of risk and extent of potential microscopic spread. This can lead to inconsistencies in treatment planning, potentially impacting treatment outcomes. Most existing automatic CTV delineation methods do not account for this variability and can only generate a single CTV for each case. Purpose This study aims to develop a deep learning‐based technique to generate multiple CTV contours for each case, simulating the inter‐reader variability in the clinical practice. Methods We employed a publicly available dataset consisting of fluorodeoxyglucose positron emission tomography (FDG‐PET), x‐ray computed tomography (CT), and pre‐contrast T1‐weighted magnetic resonance imaging (MRI) scans from 51 patients with soft tissue sarcoma, along with an independent validation set containing five additional patients. An experienced reader drew a contour of the gross tumor volume (GTV) for each patient based on multi‐modality images. Subsequently, two additional readers, together with the first one, were responsible for contouring three CTVs in total based on the GTV. We developed a diffusion model‐based deep learning method that is capable of generating arbitrary number of different and plausible CTVs to mimic the inter‐reader variability in CTV delineation. The proposed model incorporates a separate encoder to extract features from the GTV masks, leveraging the critical role of GTV information in accurate CTV delineation. Results The proposed diffusion model demonstrated superior performance with the highest Dice Index (0.902 compared to values below 0.881 for state‐of‐the‐art models) and the best generalized energy distance (GED) (0.209 compared to values exceeding 0.221 for state‐of‐the‐art models). It also achieved the second‐highest recall and precision metrics among the compared ambiguous image segmentation models. Results from both datasets exhibited consistent trends, reinforcing the reliability of our findings. Additionally, ablation studies exploring different model structures and input configurations highlighted the significance of incorporating prior GTV information for accurate CTV delineation. Conclusions The proposed diffusion model successfully generates multiple plausible CTV contours for soft tissue sarcomas, effectively capturing inter‐reader variability in CTV delineation.

Dong, Yafei [Yale Biomedical Imaging Institute Yal↗

Anisotropy in the deep Earth

Not provided.Seismic anisotropy has been found in many regions of the Earth's interior. Its presence in the Earth's crust has been known since the 19th century, and is due in part to the alignment of anisotropic crystals in rocks, and in part to patterns in the distribution of fractures and pores. In the upper mantle, seismic anisotropy was discovered 50 years ago, and can be attributed for the most part, to the alignment of intrinsically anisotropic olivine crystals during large scale deformation associated with convection. There is some indication for anisotropy in the transition zone, particularly in the vicinity of subducted slabs. Here we focus on the deep Earth – the lower mantle and core, where anisotropy is not yet mapped in detail, nor is there consensus on its origin. Most of the lower mantle appears largely isotropic, except in the last 200–300 km, in the D" region, where evidence for seismic anisotropy has been accumulating since the late 1980s, mostly from shear wave splitting measurements. Recently, a picture has been emerging, where strong anisotropy is associated with high shear velocities at the edges of the large low shear velocity provinces (LLSVPs) in the central Pacific and under Africa. These observations are consistent with being due to the presence of highly anisotropic MgSiO3 post-perovskite crystals, aligned during the deformation of slabs impinging on the core-mantle boundary, and upwelling flow within the LLSVPs. In this report we also discuss mineral physics aspects such as ultrahigh pressure deformation experiments, first principles calculations to obtain information about elastic properties, and derivation of dislocation activity based on bonding characteristics. Polycrystal plasticity simulations can predict anisotropy but models are still highly idealized and neglect the complex microstructure of polyphase aggregates with strong and weak components. A promising direction for future progress in understanding the origin of seismic anisotropy in the deep mantle and its relation to global mantle circulation, is to link macroscopic information from seismology and microscopic information mineral physics through geodynamics modeling. Anisotropy in the inner core was proposed 30 years ago to explain faster P wave propagation along the direction of the Earth's axis of rotation as well as anomalous splitting of core sensitive free oscillations. There is still uncertainty about the origin of this anisotropy. In particular, it is difficult to explain its strength, based on known elastic properties of iron, as it would require almost perfect alignment of iron crystals. Indeed, the strongly anomalous P travel times observed on paths from the South Sandwich Islands to Alaska may or may not be due to inner core anisotropy, and will need to be explained before consensus can be reached on the strength of anisotropy in the inner core and its origin.

58 GEOSCIENCES↗

Fracture toughness of the sidewall fluorinated carbon nanotube-epoxy interface

The effects of carbon nanotube (CNT) sidewall fluorination on the interface toughness of the CNT epoxy interface have been comprehensively investigated. Nanoscale quantitative single-CNT pull-out experiments have been conducted on individual fluorinated CNTs embedded in an epoxy matrix, in situ, within a scanning electron microscope (SEM) using an InSEM{sup ®} nanoindenter assisted micro-device. Equations that were derived using a continuum fracture mechanics model have been applied to compute the interfacial fracture energy values for the system. The interfacial fracture energy values have also been independently computed by modeling the fluorinated graphene-epoxy interface using molecular dynamics simulations and adhesion mechanisms have been proposed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Control of domain wall pinning by localised focused Ga {sup +} ion irradiation on Au capped NiFe nanowires

Understanding domain wall pinning and propagation in nanowires are important for future spintronics and nanoparticle manipulation technologies. Here, the effects of microscopic local modification of the magnetic properties, induced by focused-ion-beam intermixing, in NiFe/Au bilayer nanowires on the pinning behavior of domain walls was investigated. The effects of irradiation dose and the length of the irradiated features were investigated experimentally. The results are considered in the context of detailed quasi-static micromagnetic simulations, where the ion-induced modification was represented as a local reduction of the saturation magnetization. Simulations show that domain wall pinning behavior depends on the magnitude of the magnetization change, the length of the modified region, and the domain wall structure. Comparative analysis indicates that reduced saturation magnetisation is not solely responsible for the experimentally observed pinning behavior.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photon counting imaging with an electron-bombarded CCD: Towards a parallel-processing photoelectronic time-to-amplitude converter

We have used an electron-bombarded CCD for optical photon counting imaging. The photon event pulse height distribution was found to be linearly dependent on the gain voltage. We propose on this basis that a gain voltage sweep during exposure in an electron-bombarded sensor would allow photon arrival time determination with sub-frame exposure time resolution. This effectively uses an electron-bombarded sensor as a parallel-processing photoelectronic time-to-amplitude converter, or a two-dimensional photon counting streak camera. Several applications that require timing of photon arrival, including Fluorescence Lifetime Imaging Microscopy, may benefit from such an approach. A simulation of a voltage sweep performed with experimental data collected with different acceleration voltages validates the principle of this approach. Moreover, photon event centroiding was performed and a hybrid 50% Gaussian/Centre of Gravity + 50% Hyperbolic cosine centroiding algorithm was found to yield the lowest fixed pattern noise. Finally, the camera was mounted on a fluorescence microscope to image F-actin filaments stained with the fluorescent dye Alexa 488 in fixed cells.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Large scale structure from viscous dark matter

Cosmological perturbations of sufficiently long wavelength admit a fluid dynamic description. We consider modes with wavevectors below a scale k{sub m} for which the dynamics is only mildly non-linear. The leading effect of modes above that scale can be accounted for by effective non-equilibrium viscosity and pressure terms. For mildly non-linear scales, these mainly arise from momentum transport within the ideal and cold but inhomogeneous fluid, while momentum transport due to more microscopic degrees of freedom is suppressed. As a consequence, concrete expressions with no free parameters, except the matching scale k{sub m}, can be derived from matching evolution equations to standard cosmological perturbation theory. Two-loop calculations of the matter power spectrum in the viscous theory lead to excellent agreement with N-body simulations up to scales k=0.2 h/Mpc. The convergence properties in the ultraviolet are better than for standard perturbation theory and the results are robust with respect to variations of the matching scale.

79 ASTRONOMY AND ASTROPHYSICS↗

Direct numerical simulations of agglomeration of circular colloidal particles in two-dimensional shear flow

Colloidal agglomeration of nanoparticles in shear flow is investigated by solving the fluid-particle and particle-particle interactions in a 2D system. We use an extended finite element method in which the dynamics of the particles is solved in a fully coupled manner with the flow, allowing an accurate description of the fluid-particle interfaces without the need of boundary-fitted meshes or of empirical correlations to account for the hydrodynamic interactions between the particles. Adaptive local mesh refinement using a grid deformation method is incorporated with the fluid-structure interaction algorithm, and the particle-particle interaction at the microscopic level is modeled using the Lennard-Jones potential. Motivated by the process used in fabricating fuel cell catalysts from a colloidal ink, the model is applied to investigate agglomeration of colloidal particles under external shear flow in a sliding bi-periodic Lees-Edwards frame with varying shear rates and particle fraction ratios. Both external shear and particle fraction are found to have a crucial impact on the structure formation of colloidal particles in a suspension. Segregation intensity and graph theory are used to analyze the underlying agglomeration patterns and structures, and three agglomeration regimes are identified.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulated CO 2 storage efficiency factors for saline formations of various lithologies and depositional environments using new experimental relative permeability data

Saline formations are attractive geologic reservoirs for permanent carbon dioxide (CO 2 ) storage. Here, the U.S. Department of Energy's National Energy Technology Laboratory (DOE-NETL) has worked to develop and refine methods and tools for the calculation of CO 2 storage potential in subsurface reservoirs. DOE-NETL's CO 2 -SCREEN provides an online tool for executing these storage methods. CO 2 storage efficiency terms are input parameters in DOE-NETL's methods and equations embedded in the CO 2 -SCREEN, which assesses pore space available for CO 2 storage. In this work, a modeling workflow was initiated to refine two CO 2 storage efficiency terms - volumetric displacement (E V ) and microscopic displacement (E d ). The models are based on new experimental relative permeability data that are specific to homogenous lithology and depositional environments of key subsurface saline formations targeted for CO 2 storage. In future work, heterogenous features will be added to this initial modeling effort to update efficiency factors as described in DOE-NETL's methods and CO 2 -SCREEN tool. E V accounts for the volume utilized in the reservoir under the areal plume, while E d accounts for saturation values in the plume to assess efficiency of CO 2 storage at the pore scale. The results of this work are significant in that prior values were based on a limited geologically non-specific relative permeability data set that were collected prior to 2009. Specifically, we applied numerical simulations using TOUGH3 models to update CO 2 storage efficiency values for supercritical CO 2 injection into brine-saturated reservoirs for three lithologies (clastics, limestone, dolomite) and six depositional environments (Marginal Marine, Strand Plain, Deltaic Complex Fluvial, Aeolian, Shallow Marine, and Reef) that have a high potential for geologic CO 2 storage. Experimental relative permeability data in cores from these environments were utilized in the models with corresponding rock type/sedimentary environment. Results of this study showed that dolomite followed by limestone generated higher ranges of storage efficiency compared to clastics. The updated values provided a tighter efficiency range for clastics, lower P 10 but higher P 90 range for limestone, and higher P 10 and P 90 for dolomite. In general, tighter reservoirs with relatively low permeability and porosity were associated with higher E V and E d , showing efficient reservoir and pore utilization in these scenarios. High reservoir pressure and temperature associated with increasing depth increased the E V , and high CO 2 injection rates resulted in increases in E V and E d , while the impact of permeability anisotropy was minimal after the 30-year injection period.

03 NATURAL GAS↗

Coupling Experiments and Simulations to Understand Metallic Fuel Behavior

The development of metal alloy fuels for minor actinide transmutation in fast reactor systems is of high importance. However, it faces numerous technical challenges such as: i) fuel behavior has to be benign during core off-normal events; ii) fuel has to maintain integrity to high burnup; iii) low minor actinide fabrication loss under remote handling conditions; and iv) fuel has to lend itself to low-loss recycling process. Limited experimental fuel performance data is currently available to support the selection of a fuel type for a transmutation system. Metallic fuels are being considered for application in fast reactor environment due to the high burn-up, high fissile and fertile density capability, inherent safety characteristics, favorable thermal response, and relatively easy recycling process. The uranium-plutonium-zirconium (U-Pu- Zr) based alloys are considered as one of the most promising metallic fuels for such application. In this work, we present results of microstructural characterization of Pu-Zr and U-Pu-Zr alloys and provide much needed linkage between thermal properties and microscopic scale observation. A firm understanding of microstructural evolution in reactor materials is imperative and will lead to deeper understanding of in-reactor degradation behavior, creating a new generation of radiation-resistant materials and fuels with the potential for significant increases in burn-up.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The influence of cooling rate on condensation of iron, aluminum, and uranium oxide nanoparticles

Fundamental observations of particle size distributions are needed to develop models that predict the fate and transport of radioactive materials in the atmosphere following a nuclear incident. The extent of material transport is influenced by the time scales of particle formation processes (e.g., condensation, coagulation). In this study, we investigated the influence of cooling time scales on size distributions of uranium, aluminum, and iron oxide particles that are synthesized separately under identical run conditions inside the controlled environment of an argon plasma flow reactor. Two distinct temperature distributions are imposed along the flow reactor by varying the argon flow rate downstream of the plasma torch. The vaporized reactants of uranium, aluminum, and iron are cooled from about 5000K to 1000K before they are collected on silicon wafers for ex situ scanning electron microscope analysis. The microscope images show that the sizes of the largest aluminum and iron oxide particles heavily depend on the cooling time scales, whereas significant size variation with cooling rate is not observed for uranium oxide particles. In addition, the size distribution of aluminum oxide particles exhibits the broadest range among all three metal oxides studied. We performed simulations of particle size distributions using a kinetic model that couples gas phase oxidation chemistry with particle formation processes, including nucleation, condensation, and coagulation. The model results demonstrate the strong sensitivity of particle size distribution to different cooling histories (i.e., temperature vs residence time) along the flow reactor. In conclusion, the kinetic model also helps identify directions for future research to improve the predictions.

36 MATERIALS SCIENCE↗

A one-dimensional stochastic approach to the study of cyclic voltammetry with adsorption effects

In this study, a one-dimensional stochastic model based on the random walk approach is used to simulate cyclic voltammetry. The model takes into account mass transport, kinetics of the redox reactions, adsorption effects and changes in the morphology of the electrode. The model is shown to display the expected behavior. Furthermore, the model shows consistent qualitative agreement with a finite difference solution. This approach allows for an understanding of phenomena on a microscopic level and may be useful for analyzing qualitative features observed in experimentally recorded signals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiation-induced surface degradation of GaAs and high electron mobility transistor structures

Transistor heterostructures with high-carrier-mobility have been studied. It is shown that, as the {gamma}-irradiation dose {Phi} increases, their degradation occurs in the following sequence. (i) At {Phi} < 10{sup 7} rad, the GaAs surface layer is damaged to a depth of 10 nm due to a >0.2-eV decrease in the diffusion energy of intrinsic defects and, probably, atmospheric oxygen. (ii) At {Phi} > 10{sup 7} rad, highly structurally disordered regions larger than 1 {mu}m are formed near microscopic defects or dislocations. (iii) At {Phi} > 10{sup 8} rad, there occurs degradation of the internal AlGaAs/InGaAs/GaAs interfaces and the working channel. An effective method for studying the degradation processes in heterostructures is to employ a set of structural diagnostic methods to analyze processes of radiation-induced and aging degradation, in combination with theoretical simulation of the occurring processes.

36 MATERIALS SCIENCE↗

Generation of a frequency comb and applications thereof

Apparatus for generating a microwave frequency comb (MFC) in the DC tunneling current of a scanning tunneling microscope (STM) by fast optical rectification, cause by nonlinearity of the DC current vs. voltage curve for the tunneling junction, of regularly-spaced, short pulses of optical radiation from a focused mode-locked, ultrafast laser, directed onto the tunneling junction, is described. Application of the MFC to high resolution dopant profiling in semiconductors is simulated. Application of the MFC to other measurements is described.

47 OTHER INSTRUMENTATION↗

Biofouling of filtration membranes in wastewater reuse: In situ visualization with confocal laser scanning microscopy

The filtration membranes utilized in advanced treatment of municipal wastewater are prone to biological fouling. Permeability loss and water recovery limitations due to fouling necessitate additional pretreatment and membrane cleaning, which raise the cost of water reuse. Better fouling mitigation calls for a deeper understanding of biofilm behavior on water reuse membranes. This study uses confocal microscopy to monitor biofouling under realistic conditions. To simulate water reuse, a miniature flow cell with microfiltration and ultrafiltration membranes was operated under typical filtration conditions using secondary effluent from California's East Bay Municipal Utility District. The growing biofilms were stained for extracellular polymeric substances and live and dead cells, and they were monitored in situ under filtration conditions with a confocal laser scanning microscope to produce 2-D and 3-D images. In situ image series revealed biofilm growth and removal processes including internal and external fouling, extracellular polymeric substance production, wrinkling, delamination, and film re-deposition. Additionally, changes in biofilm morphology between in situ and ex situ images highlighted limitations of ex situ imaging. Here, these results provide insight into the physical and biological mechanisms of biofouling in hopes of informing the development of improved techniques for biofouling mitigation.

ultrafiltration↗

A Detailed Examination of the Topological Constraints of Lamellae-Forming Block Copolymers

A microscopic molecular model of polymeric molecules that captures the effects of topological constraints is used to consider how microphase segregation can alter the distribution of entanglements both in space and along chain contours. Such topological constraints are obtained by using the Z1 algorithm, and it is found that for diblock copolymers in the lamellar morphology they are not homogeneously distributed, but instead exhibit a spatial dependence as a consequence of the self-organization of the polymer blocks. The specific shape of the inhomogeneous distribution is affected by the molecular weight of the copolymer. The microscopic information obtained by these calculations is then compared with the corresponding results generated from a coarser description of entangled block copolymers that includes soft intermolecular interactions and slip-springs, whose role is to incorporate the effects of entanglements that are lost during coarse-graining. Finally, this comparison is helpful for improving coarse-grained simulation approaches for use in multiscale studies of large-scale, self-assembled multicomponent polymer systems.

36 MATERIALS SCIENCE↗

Enabling Magnesium Anodes by Tuning the Electrode/Electrolyte Interfacial Structure

Here, a new deposition mechanism is presented in this study to achieve highly reversible plating and stripping of magnesium (Mg) anodes for Mg-ion batteries. It is known that the reduction of electrolyte anions such as bi s (trifluoromethanesulfonyl) imide (TFSI - ) causes Mg surface passivation, resulting in poor electrochemical performance for Mg-ion batteries. We reveal that the addition of sodium cations (Na + ) in Mg-ion electrolytes can fundamentally alter the interfacial chemistry and structure at the Mg anode surface. The molecular dynamics simulation suggests that Na + cations contribute to a significant population in the interfacial double layer so that TFSI - anions are excluded from the immediate interface adjacent to the Mg anode. As a result, the TFSI - decomposition is largely suppressed so does the formation of passivation layers at the Mg surface. This mechanism is supported by our electrochemical, microscopic, and spectroscopic analyses. The resultant Mg deposition demonstrates smooth surface morphology and lowered overpotential compared to the pure Mg(TFSI) 2 electrolyte.

25 ENERGY STORAGE↗

Cosmology at the end of the world

In the last two decades the anti-de Sitter/conformal field theory (AdS/CFT) correspondence has emerged as a focal point of many research interests. In particular, it functions as a stepping stone to a still-missing full quantum theory of gravity. In this context, a pivotal question is if and how cosmological physics can be studied using AdS/CFT. Motivated by string theory, braneworld cosmologies propose that our universe is a four-dimensional membrane embedded in a bulk five-dimensional AdS spacetime. We show how such a scenario can be microscopically realized in AdS/CFT using special field theory states dual to an ‘end-of-the-world brane’ moving in a charged black hole spacetime. Observers on the brane experience cosmological physics and approximately four-dimensional gravity, at least locally in spacetime. Finally, this result opens a path towards a description of quantum cosmology and the simulation of cosmology on quantum machines.

79 ASTRONOMY AND ASTROPHYSICS↗

Non-equilibrium insertion of lithium ions into graphite

Graphite has been regarded as the most important anode material for currently used lithium-ion batteries due to its two-dimensional (2D) nature hosting ionic intercalations. However, the kinetic insertion of Li ions is still not well known microscopically. In this work, we investigate the real-time intercalation process of Li ions using in situ transmission electron microscopy. We observe the lithium insertion process at the atomic scale, in which the graphite layers undergo expansion, forming wrinkles and finally inhomogeneous cracks as the Li ions accumulate, different from the proposed models. Leveraging on theoretical simulations, Li-ion migration driven by an external electrical field is suggested to be induced into the irreversible wrinkled structures. This non-equilibrium behavior that occur in lithium-ion batteries can be more pronounced at a high charging rate, which will practically degrade the capacity of graphite. Furthermore, this work unveils the reaction scenario of the non-equilibrium Li-ion insertion, which benefits the understanding of the performance of graphite-based energy-storage devices.

25 ENERGY STORAGE↗