Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microstructures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Microstructure development during rapid alloy solidification

Abstract Solidification processing of structural alloys can take place over an extremely wide range of solid–liquid interface velocities spanning six orders of magnitude, from the low-velocity constitutional supercooling limit of microns/s to the high-velocity absolute stability limit of m/s. In between these two limits, the solid–liquid interface is morphologically unstable and typically forms cellular-dendritic microstructures, but also other microstructures that remain elusive. Rapid developments in additive manufacturing have renewed the interest in modeling the high-velocity range, where approximate analytical theories provide limited predictions. In this article, we discuss recent advances in phase-field modeling of rapid solidification of metallic alloys, including a brief description of state-of-the-art experiments used for model validation. We describe how phase-field models can cope with the dual challenge of carrying out simulations on experimentally relevant length- and time scales and incorporating nonequilibrium effects at the solid–liquid interface that become dominant at rapid rates. We present selected results, illustrating how phase-field simulations have yielded unprecedented insights into high-velocity interface dynamics, shedding new light on both the absolute stability limit and the formation of banded microstructures that are a hallmark of rapid alloy solidification near this limit. We also discuss state-of-the-art experiments used to validate those insights. Graphical abstract

36 MATERIALS SCIENCE↗

Effect of α/β Forging on Microstructure and Texture Inhomogeneity in a Ti-1023 Forged Disk

The microstructure and texture distribution of a Ti-1023 forged disk were investigated by scanning electron microscopy and synchrotron-based high-energy X-ray diffraction. The finite element method was used to simulate temperature and strain distribution in order to investigate the relationship of the α/β forging process with microstructure and texture distribution. A bimodal microstructure and rolling textures with large inhomogeneity were observed in the disk. A plate-like and a necklace-like morphology and volume fraction variations of the primary α phase were observed in different regions with different forging conditions, such as temperature, deformation, position, and high density of flow lines. Texture sharpness distribution of the β phase was in good agreement with the strain distribution, which suggests deformation may play the most important part in the texture inhomogeneity. A weak cube texture was obtained near the center of the disk, and fiber textures were found near the rim of the disk. The primary a phase also exhibited a transverse texture, which is favored by large deformation.

36 MATERIALS SCIENCE↗

U-10Mo/Zr Interface Modeling using a Microstructure-Based FEM Approach

The U-10Mo in low enrichments (LEU) has been identified as the most promising alternative to the current highly enriched uranium (HEU) used in the United States’ fleet of high performance research reactors (USHPRRs). The nominal configuration of the new LEU U-10Mo plate fuel comprises a U-10Mo fuel foil enriched to slightly less than 20% U-235 (0.08” to 0.02” thick), a thin Zr interlayer/diffusion barrier (25 m thick) and a relatively thick outer can of 6061 aluminum. Currently, the Zr interlayer is clad by hot roll bonding. Previous studies and observations revealed a thinning of the zirconium (Zr) layer during this fuel fabrication process, which is not desirable from the fuel performance perspective. Coarse UMo grains, dendritic structures, Mo concentration segregation, carbides, and porosity are present in the as-cast material and can lead to a nonuniform UMo/Zr interface. The purpose of the current work is to investigate the effects of these microstructural parameters on the Zr coating variation. A microstructure-based finite-element method model was used in this work, and a study on the effect of homogenization on the interface between U-10Mo and Zr was conducted. The model uses actual backscattered electron–scanning electron microscopy microstructures, Mo concentrations, and mechanical properties to predict the behavior of a representative volume element under compressive loading during the rolling process. The model successfully predicted the experimentally observed thinning of the Zr layer in the as-cast material. The model also uses results from a homogenization model as an input, and a study on the effect of different levels of homogenization on the interface indicated that homogenization helps decrease this thinning. This model can be considered a predictive tool representing a first step for model integration and an input into a larger fuel fabrication performance model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Influence of Homogenization on the Mechanical Properties and Microstructure of the U-10Mo Alloy

In Phase 1 of this study, the mechanical properties of as-cast, depleted uranium alloyed with 10 weight percent molybdenum alloy (U-10Mo) samples were evaluated by high-temperature compression testing. Compression testing was conducted at three strain rates over a temperature range of 400 to 800°C. The results indicated that with increasing test temperature, the material flow stress decreases and the material becomes more sensitive to strain rate. In addition, above the eutectoid transformation temperature (~ 550°C), the drop in material flow stress is prominent and shows a strain-softening behavior, especially at lower strain rates. In the second part of this research, we studied the effect that homogenization heat treatment had on the high temperature mechanical properties and microstructure of the cast U-10Mo alloy. Various homogenization times and temperatures were studied ranging between 800 and 1000°C for 4 to 48 hours. Based on the microstructural response in this homogenization study, a heat treatment cycle of 800°C for 24 hours and another at 1000°C for 16 hours were selected as the times at temperature to achieve a fully homogenized sample. Samples from these conditions were then compression tested at a variety of temperatures ranging from 500 to 800°C. The microstructure of these samples were compared to the as-cast samples and to a baseline sample homogenized at 1000°C for 16 hours. The results indicate that below the eutectoid temperature (~ 550°C) all three samples showed strain hardening and followed similar trends. Above the eutectoid temperature, the yield strength of the material decreased linearly. For the as-cast sample and the sample homogenized at 800°C for 24 hours, the n-values were negative, whereas for the samples homogenized at 1000°C for 16 hours the material exhibited a perfectly plastic behavior. The as-cast sample, heat treated at 800°C for 24 hours, showed significant lamellar structure transformation that seems to have precipitated along the grain boundaries in the molybdenum-lean regions. In similar samples, homogenized at 800°C for 24 hours and tested at 650°C, the backscattered-electron scanning electron microscopy images revealed a composite structure of lamellar phase and nano-scale molybdenum-rich and -lean phases along the grain boundaries. These phases may have been responsible for the lowering of the flow stress in the material observed in the Phase 1 work. For comparison, the samples homogenized at 1000°C for 16 hours showed no such transformations.

36 MATERIALS SCIENCE↗

Graphite Microstructural Characterization Using Time-Domain and Correlation-Based Ultrasonics

Among techniques that have been used to determine elastic modulus in nuclear graphites, ultrasonic methods have enjoyed wide use and standards using contacting piezoelectric tranducers have been developed to ensure repeatability of these types of measurements. However, the use of couplants and the pressures used to effectively couple transducers to samples can bias measurements and produce results that are not wholly related to the properties of the graphite itself. In this work, we have investigated the use of laser ultrasonic methods for making elastic modulus measurements in nuclear graphites. These methods use laser-based transmitters and receivers to gather data and do not require use of ultrasonic couplants or mechanical contact with the sample. As a result, information directly related to the elastic responses of graphite can be gathered even if the graphite is porous, brittle and compliant. In particular, we have demonstrated the use of laser ultrasonics for the determination of both Young’s modulus and shear modulus in a range of nuclear graphites including those that are being considered for use in future nuclear reactors. These results have been analyzed to assess the contributions of porosity and microcracking to the elastic responses of these graphites. Laser-based methods have also been used to assess the moduli of NBG-18 and IG-110 where samples of each grade were oxidized to produce specific changes in porosity. These data were used to develop new models for the elastic responses of nuclear graphites and these models have been used to infer specific changes in graphite microstructure that occur during oxidation that affect elastic modulus. Specifically, we show how ultrasonic measurements in oxidized graphites are consistent with nano/microscale oxidation processes where basal plane edges react more readily than basal plane surfaces. We have also shown the use of laser-based methods to perform shear-wave birefringence measurements and have shown how these measurements can be used to assess elastic anisotropy in nuclear graphites. Using models developed in this program, ultrasonic data were interpreted to extract orientation distribution coefficients that could be used to represent anisotropy in these materials. This demonstration showed the use of ultrasonic methods to quantify anisotropy and how these methods provide more detailed information than do measurements of thermal expansion – a technique commonly used for assessing anisotropy in nuclear graphites. Finally, we have employed laser-based, ultrasonic-correlation techniques in attempts to quantify aspects of graphite microstructure such as pore size and distribution. Results of these measurements indicate that additional work must be performed to make this ultrasonic approach viable for quantitative microstructural characterization.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Microstructure Experiments-Enabled MARMOT Simulations of SiC/SiC-based Accident Tolerant Nuclear Fuel System

We have undertaken an experimental-computational project that addresses a few key technology gaps associated with the use of SiC/SiC composites for light water reactor fuel cladding. Two principal endeavors in this project are to assess the irradiation-induced microstructural changes and swelling in SiC/SiC composites, and to characterize and model the porous oxide surface layer (when exposed to steam) along SiC recession that is detrimental to the clad integrity under accident conditions. The project tasks are: (i) ion irradiation and characterization (University of Tennessee, Knoxville), (ii) mechanical tests and analysis (University of South Carolina), (iii) steam exposure tests (Oak Ridge National Laboratory), (iv) electron microscopy and spectroscopic characterization (NC State University), (v) x-ray microscopy and reconstruction (University of South Carolina and NC State University), (vi) phase field modeling and simulations (NC State University and Idaho National Laboratory). The effects of 10 MeV Au ion irradiation at 350°C on the microstructure evolution in SiC/SiC composites are investigated at doses up to 400 displacements per atom (dpa) at the University of Tennessee, Knoxville. Atomic force microscopy and optical profilometry reveal irradiation induced axial and radial shrinkage of the fibers for doses greater than 10 dpa. Based on detailed electron microscopy characterization, the primary cause of the fiber shrinkage is attributed to irradiation-induced loss of carbon packets. Additionally, the multilayer PyC interface is observed to portray high resistance to irradiation damage. The mechanical response and failure mechanisms of un-irradiated samples is also assessed through loading tests and X-ray imaging at the University of South Carolina. Steam exposure tests are performed at the Oak Ridge National Laboratory in a facility that represents a reactor pressure vessel under a loss-of-coolant-accident scenario. The samples that are analyzed methodically in this report are tested for 32/31 hours at 1200°C with a velocity of 0.25 cm/s for the pressures: 0.1 MPa, 0.45 MPa, 0.92 MPa and 1.38 MPa. Scanning/transmission electron microscopy analysis conducted at the NC State University (NCSU) shows that the oxide layer thickness increases with the steam pressure. While the oxide layer is crystalline (α- cristobalite) for the pressures 0.45 MPa, 0.92 MPa and 1.38 MPa, the layer is amorphous at 0.1 MPa. Results from Raman spectroscopy have also confirmed the formation of α-cristobalite phase of SiO₂. The abrupt increase in the integrated Raman intensity ratio between steam pressures 0.1 and 0.45 MPa suggests the onset of accelerated crystallization. Non-destructive three dimensional X-ray microscopy/tomography (XCT) and computational image processing techniques are employed by the University of South Carolina to probe the porous oxidation features on SiC samples at varying pressures. Interestingly, most pores are observed to be located away from the surface as well as the oxide-SiC interface. The average oxide layer thickness assessed from the XCT analysis is seen to be in excellent agreement with the values determined through scanning electron microscopy analysis for the highest pressures where the oxide layer is relatively more uniform. A phase-field model developed by the NC State University and Idaho National Laboratory for simulating oxidation of SiC by steam captures the paralinear kinetics of SiC oxidation with a high degree of fidelity. Results from quasi-one-dimensional and two dimensional simulations show that the pores with oxidizing species lead to a higher volatilization rate. These simulations indicate that the enhanced apparent volatilization rates at higher pressures observed in experiments can be rationalized by the increased volatilization from the pores. The project team has also successfully developed the capability to import images from experiments for realistic evolution of the oxidizing microstructure.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Microstructural Characterization of As-Cast MP-1 Experiment U-10Mo Alloy

The Mini-Plate-1 (MP-1) test is the first in a series of fuel testing campaigns with the purpose of achieving regulatory qualification for the U-10Mo monolithic plate-type fuel system. The objective of MP-1 is to assess fuel performance behavior of fuel plates fabricated by a commercial fuel fabricator (BWX Technologies, Inc.) and make sure that the fuel maintains mechanical integrity and geometric stability and behaves in a stable and predictable manner. As a part of MP1 fabrication campaign several castings were prepared. The castings were vacuum induction melted using HEU pieces mixed with a master alloy made up of DU and molybdenum pieces. The Master Alloy was poured by a commercial vendor. There was little mixing during melting. A three-plate mold was utilized to form three U-10Mo plates per melt pour. The work described here shows that the resulting microstructure varies greatly from one cast plate to another, and from the top to the bottom of each cast plate. The extent of variation in microstructural features such as grain size, second phase particle (SPP) distribution and morphology, microsegregation of constituents within the dendritic microstructure, porosity, and casting abnormalities are presented and discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Correlation of Microstructure and Mechanical Properties of Metal Big Area Additive Manufacturing

Metal Big Area Additive Manufacturing (MBAAM) is a novel wire-arc additive manufacturing method that uses a correction-based approach developed at the Oak Ridge National Laboratory (ORNL). This approach is an integrated software method that minimizes the dynamic nature of welding and compensates for build height. The MBAAM process is used to fabricate simple geometry thin walled specimens, using a C-Mn steel weld wire, to investigate the scatter in mechanical properties and correlate them to the underlying microstructure. The uni-axial tensile tests show isotropic tensile and yield properties with respect to building directions, although some scatter in elongation is observed. Large scatter is observed in the Charpy Impact tests. The microstructure characterization reveals mostly homogenous ferrite grains with some pearlite, except for some changes in morphology and grain size at the interface between the build and the base plate. The measured properties and microstructure are compared with the toughness and strength values reported in the literature, and a hypothesis is developed to rationalize the differences. Overall, the MBAAM process creates stable, isotropic, and weld-like mechanical properties in the deposit, while achieving a precise geometry obtained through a real-time feedback sensing, closed loop control system.

36 MATERIALS SCIENCE↗

Effects of Bi Addition on the Microstructure and Mechanical Properties of Nanocrystalline Ag Coatings

Here in this study we investigated the effects of Bi addition on the microstructure and mechanical properties of an electrodeposited nanocrystalline Ag coating. Microstructural features were investigated with transmission electron microscopy (TEM). The results indicate that the addition of Bi introduced nanometer-scale Ag-Bi solid solution particles and more internal defects to the initial Ag microstructures. The anisotropic elastic-plastic properties of the Ag nanocrystalline coating with and without Bi addition were examined with nanoindentation experiments in conjunction with the recently-developed inverse method. The results indicate that the as-deposited nanocrystalline Ag coating contained high mechanical anisotropy. With the addition of 1 atomic percent (at%) Bi, the anisotropy within Ag-Bi coating was very small, and yield strength of the nanocrystalline Ag-Bi alloy in both longitudinal and transverse directions were improved by over 100% compared to that of Ag. On the other hand, the strain-hardening exponent of Ag-Bi was reduced to 0.055 from the original 0.16 of the Ag coating. Furthermore, the addition of Bi only slightly increased the electrical resistivity of the Ag-Bi coating in comparison to Ag. Lastly, results of our study indicate that Bi addition is a promising method for improving the mechanical and physical performances of Ag coating for electrical contacts.

36 MATERIALS SCIENCE↗

Microcomputed X-Ray Tomographic Imaging and Image Processing for Microstructural Characterization of Explosives

Microstructural characterization of composite high explosives (HEs) has become increasingly important over the last several decades in association with the development of high fidelity mesoscale modeling and an improved understanding of ignition and detonation processes. HE microstructure influences not only typical material properties (e.g., thermal, mechanical) but also reactive behavior (e.g., shock sensitivity, detonation wave shape). A detailed nondestructive 3D examination of the microstructure has generally been limited to custom-engineered samples or surrogates due to poor contrast between the composite constituents. Highly loaded (>90 wt%) HE composites such as plastic-bonded explosives (PBX) are especially difficult. Here, we present efforts to improve measurement quality by using single and dual-energy microcomputed X-ray tomography and state-of-the-art image processing techniques to study a broad set of HE materials. Some materials, such as PBX 9502, exhibit suitable contrast and resolution for an automatic segmentation of the HE from the polymer binder and the voids. Other composite HEs had varying levels of success in segmentation. Post-processing techniques that used commercially available algorithms to improve the segmentation quality of PBX 9501 as well as zero-density defects such as cracks and voids could be easily segmented for all samples. Aspects of the materials that lend themselves well to this type of measurement are discussed.

36 MATERIALS SCIENCE↗

Effect of Initial Microstructure on the Toughness of Coarse-Grained Heat-Affected Zone in a Microalloyed Steel

Toughness of the coarse-grained-heat-affected-zone (CGHAZ) strongly depends on the prior austenite grain size. The prior austenite grain size is affected not only by chemical composition, thermal cycle, and dissolution of second-phase particles, but also by the initial microstructure. The effect of base metal microstructure (ferrite/pearlite obtained by air cooling and martensite obtained by water-quenching) on Charpy impact toughness of the CGHAZ has been investigated for different heat inputs for high-heat input welding of a microalloyed steel. A welding thermal cycle with a heat input of 100 kJ/cm and 400 kJ/cm were simulated on the MMS-300 system. Despite a similar microstructure in the CGHAZ of both the base metals, the average Charpy impact energy for the air-cooled base metal was found to be higher than the water-quenched base metal. Through thermo-kinetic simulations, it was found that a higher enrichment of Mn/C at the ferrite/austenite transformation interface of the CGHAZ of water-quenched base metal resulted in stabilizing austenite at a lower A1 temperature, which resulted in a coarser austenite grain size and eventually lowering the toughness of the CGHAZ.

36 MATERIALS SCIENCE↗

Investigation of Microstructures and Tensile Properties of 316L Stainless Steel Fabricated via Laser Powder Bed Fusion

In this study, a thorough investigation of the microstructures and tensile properties of 316L stainless steel fabricated via laser powder bed fusion (L-PBF) was done. 316L stainless steel specimens with two different thicknesses of 1.5 mm and 4.0 mm fabricated under similar conditions were utilized. Microstructural characterization was performed using optical microscopy (OM) and scanning electron microscopy (SEM) equipped with electron backscatter diffraction (EBSD). Melt pools and cellular structures were observed using OM, whereas EBSD was utilized to obtain the grain size, grain boundary characteristics, and crystallographic texture. The 1.5 mm thick sample demonstrated a yield strength (YS) of 538.42 MPa, ultimate tensile strength (UTS) of 606.47 MPa, and elongation to failure of 69.88%, whereas the 4.0 mm thick sample had a YS of 551.21 MPa, UTS of 619.58 MPa, and elongation to failure of 73.66%. These results demonstrated a slight decrease in mechanical properties with decreasing thickness, with a 2.4% reduction in YS, 2.1% reduction in UTS, and 5.8% reduction in elongation to failure. In addition to other microstructural features, the cellular structures were observed to be the major contributors to the high mechanical properties. Using the inverse pole figure (IPF) maps, both thicknesses depicted a crystallographic texture of {001} <101> in their as-built state. However, when subjected to tensile loads, texture transitions to {111} <001> and {111} <011> were observed for the 1.5 mm and 4.0 mm samples, respectively. Additionally, EBSD analysis revealed the pre-existence of high-density dislocation networks and a high fraction of low-angle grain boundaries. Interestingly, twinning was observed, suggesting that the plastic deformation occurred through dislocation gliding and deformation twinning.

316L stainless steel↗

Effect of heat treatment on microstructure and hardness of Grade 91 steel

The modified 9Cr-1Mo steel (Grade 91) is a material of choice in fossil-fuel-fired power plants with increased efficiency, service life, and reduction in emission of greenhouse gases. It is also considered a prospective material for the Next Generation Nuclear Power Plant for application in reactor pressure vessels at temperatures up to 650°C. In this paper, heat treatment of the modified 9Cr-1Mo steel was studied by normalizing and tempering the steel at various temperatures and times, with the ultimate goal of improving its creep resistance and optimizing material hardness. The microstructural evolution of the heat treated steels was correlated with the differential scanning calorimetric results. Optical microscopy, scanning and transmission electron microscopy in conjunction with microhardness profiles and calorimetric plots were used to understand the evolution of microstructure including precipitate structures in modified 9Cr-1Mo steel and relate it to the mechanical behavior of the steel. Thermo-CalcTM calculations were used to support experimental work and provide guidance in terms of the precipitate stability and microstructural evolution. Furthermore, the carbon isopleth and temperature dependencies of the volume fraction of different precipitates were constructed. The predicted and experimentally observed results were found to be in good agreement.

20 FOSSIL-FUELED POWER PLANTS↗

Influence of Thermal and Radiation Effects on Microstructural and Mechanical Properties of Nb-1Zr

Refractory metals and alloys offer attractive high-temperature properties, most of which are suitable for applications in nuclear environments including high temperature strength, good thermal conductivity, and compatibility with most liquid metal coolants. One of only two commercially produced Nb-alloys, Nb-1Zr has long been considered for various compact reactor designs. Nb-1Zr has also recently been considered for high-performance Gen IV gas reactor concepts. However, there are significant gaps in the irradiated materials database, especially at temperatures above 800 K. Recent work has shown that irradiated properties of Nb-1Zr are strongly controlled by phase-related transformations in the microstructure. Changes in the microstructure (obtained via scanning and transmission electron microscopy) and corresponding mechanical properties of Nb-1Zr were examined following fission reactor irradiation experiments at temperatures of 1073, 1223 and 1373 K to 1.9 dpa (displacements per atom) and compared with material thermally aged for similar exposure times of ~1100 h. Thermally driven changes in the development of precipitate phases showed a greater influence on mechanical properties compared to irradiation-induced defects for these irradiation conditions. The changes in material density, electrical resistivity and mechanical properties of the irradiated and thermally aged materials in association with microstructural developments are discussed.

36 MATERIALS SCIENCE↗

Multi-physics microstructural simulation of sintering.

Simulating the detailed evolution of microstructure at the mesoscale is increasingly being addressed by a number of methods. Discrete element modeling and Potts kinetic Monte Carlo have achieved success in capturing different aspects of sintering well. Discrete element cannot treat the details of neck formation and other shape evolution, especially when considering particles of arbitrary shapes. Potts kMC treats the micorstructural evolution very well, but cannot incorporate complex stress states that form especially during differential sintering. A model that is capable of simulating microstructural evolution during sintering at the mesoscale and can incorporate differential stresses is being developed. This multi-physics model that can treat both interfacial energies and the inter-particle stresses will be introduced. It will be applied to simulate microstructural evolution while resolving individual particles and the stresses that develop between them due to local shrinkage. Results will be presented and the future development of this model will be discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

TEM Characterization of High Burn-up Microstructure of U-7Mo Alloy

As an essential part of global nuclear non-proliferation effort, the RERTR program is developing low enriched U-Mo fuels (< 20% U-235) for use in research and test reactors that currently employ highly enriched uranium fuels. One type of fuel being developed is a dispersion fuel plate comprised of U-7Mo particles dispersed in Al alloy matrix. Recent TEM characterizations of the ATR irradiated U-7Mo dispersion fuel plates include the samples with a local fission densities of 4.5, 5.2, 5.6 and 6.3 E+21 fissions/cm3 and irradiation temperatures of 101-136?C. The development of the irradiated microstructure of the U-7Mo fuel particles consists of fission gas bubble superlattice, large gas bubbles, solid fission product precipitates and their association to the large gas bubbles, grain subdivision to tens or hundreds of nanometer size, collapse of bubble superlattice, and amorphisation. This presentation will describe the observed microstructures specifically focusing on the U-7Mo fuel particles. The impact of the observed microstructure on the fuel performance and the comparison of the relevant features with that of the high burn-up UO2 fuels will be discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Understanding to Hierarchical Microstructures of Crab (Chinese hairy) Shell as a Natural Architecture

This work was done to better understand the microstructures, composition and mechanical properties of Chinese hairy crab shell. For fully revealing its hierarchical microstructure, the crab shell was observed with electron microscope under different magnifications from different facets. XRD, EDS, FTIR and TGA techniques have been used to characterize the untreated and chemically-treated crab shells, which provided enough information to determine the species and relative content of components in this biomaterial. Combined the microstructures with constituents analysis, the structural principles of crab shell was detailedly realized from different structural levels beyond former reports. To explore the relationship between structure and function, the mechanical properties of shell have been measured through performing tensile tests. The contributions of organics and minerals in shell to the mechanical properties were also discussed by measuring the tensile strength of de-calcification samples treated with HCl solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructural Characterization of Irradiated Fuels and Materials for the United States High Performance Research Reactor Fuel Development Program and the Fuel Cycle Research and Development Program

In an effort to contribute to the development of advanced nuclear fuel for research reactors, monolithic and dispersion plate fuels will be examined to determine how irradiation parameters such as fission density, fission rate, and irradiation temperature, as well as mechanical parameters such as composition and fabrication, affect the final microstructure of the fuel, post irradiation. Electron Backscatter Detection (EBSD) analysis capabilities of irradiated materials will be developed as well as improvements on irradiated sample preparation in order to provide higher quality samples for SEM, FIB, and TEM. In addition, image analysis techniques developed at Idaho National Laboratory (INL) will be employed to examine microstructural features such as fission product precipitates and fission gas bubbles. The main goals are to further develop EBSD capabilities on irradiated material; characterize microstructure of irradiated fuel to support qualification; develop a consistent, effective process for image analysis using INL developed software; and provide repeatable, statistically-confident, critically assessed data to further modeling efforts. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗