SEARCH · Search NASA

Results for “Multiscale simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

All sources NASA NTRS DOE OSTI

DOE OSTI2019

Rapid Multiscale Computational Screening for OLED Host Materials

The design of new host materials for phosphorescent OLEDs is challenging because several physical property requirements must be met simultaneously. A triplet energy (E T ) higher than that of the chosen emitting dopant, appropriate HOMO/LUMO energy levels, good charge carrier transport, and high stability are all required. Here, computational methods were used to screen structures to find the most promising candidates for OLED hosts. The screening was carried out in three Tiers. The Tier 1 selection, based on Density Functional Theory calculations identified a set of eight molecular structures with E T > 2.9 eV, suitable for hosting blue phosphorescent dopants such as iridium(III)bis((4,6-di-fluorophenyl)-pyridinato-N,C2’)picolinate (FIrpic). Phenanthro[9,10 d]imidazole was chosen as the starting point for the Tier 2 selection. Thirty seven unique molecular structures were enumerated by isoelectronic nitrogen transmutation of up to two CH fragments of the phenanthrene. Three molecules, i.e. imidazo[4,5 f] phenanthrolines with nitrogens at the 1,10 , 3,8 and 4,7 positions, were selected for Tier 3, which involved the use of molecular dynamics simulations and electron coupling calculations to predict differences in charge transport between the three materials. The three were explored experimentally through synthesis and device fabrication. The singlet, triplet, and frontier orbital energies computed using single molecule DFT calculations (tiers 1 and 2) were consistent with the experimental values in fluid solution, and the multi scale modeling scheme (tier 3) correctly predicted the poor device performance of one material. Here, we conclude that screening host materials using only single molecule quantum mechanical data was not sufficient to predict whether a given material would make a good OLED host with certainty, however they can be used to screen out materials that are destined to fail due to low singlet/triplet energies or a poor match of the frontier orbital energies to the dopant or transport materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Multiphysics and Multiscale Modeling of Coupled Transport of Chloride Ions in Concrete

Chloride ions (Cl−)-induced corrosion is one of the main degradation mechanisms in reinforced concrete (RC) structures. In most situations, the degradation initiates with the transport of Cl− from the surface of the concrete towards the reinforcing steel. The accumulation of Cl− at the steel-concrete interface could initiate reinforcement corrosion once a threshold Cl− concentration is achieved. An accurate numerical model of the Cl− transport in concrete is required to predict the corrosion initiation in RC structures. However, existing numerical models lack a representation of the heterogenous concrete microstructure resulting from the varying environmental conditions and the indirect effect of time dependent temperature and relative humidity (RH) on the water adsorption and Cl− binding isotherms. In this study, a numerical model is developed to study the coupled transport of Cl− with heat, RH and oxygen (O2) into the concrete. The modeling of the concrete microstructure is performed using the Virtual Cement and Concrete Testing Laboratory (VCCTL) code developed by the U.S. National Institute of Standards and Technology (NIST). The concept of equivalent maturation time is utilized to eliminate the limitation of simulating concrete microstructure using VCCTL in specific environmental conditions such as adiabatic. Thus, a time-dependent concrete microstructure, which depends on the hydration reactions coupled with the temperature and RH of the environment, is achieved to study the Cl− transport. Additionally, Cl− binding isotherms, which are a function of the pH of the concrete pore solution, Cl− concentration, and weight fraction of mono-sulfate aluminate (AFm) and calcium-silicate-hydrate (C-S-H), obtained from an experimental study by the same authors are utilized to account for the Cl− binding of cement hydration products. The temperature dependent RH diffusion was considered to account for the transport of Cl− with moisture transport. The temperature and RH diffusion in the concrete domain, composite theory, and Cl− binding and water adsorption isotherms are used in combination, to estimate the ensuing Cl− diffusion field within the concrete. The coupled transport process of heat, RH, Cl−, and O2 is implemented in the Multiphysics Object-Oriented Simulation Environment (MOOSE) developed by the U.S. Idaho National Laboratory (INL). The model was verified and validated using data from multiple experimental studies with different concrete mixture proportions, curing durations, and environmental conditions. Additionally, a sensitivity analysis was performed to identify that the water-to-cement (w/c) ratio, the exposure duration, the boundary conditions: temperature, RH, surface Cl− concentration, Cl− diffusion coefficient in the capillary water, and the critical RH are the important parameters that govern the Cl− transport in RC structures. In a case study, the capabilities of the developed numerical model are demonstrated by studying the complex 2D diffusion of Cl− in a RC beam located in two different climatic regions: warm and humid weather in Galveston, Texas, and cold and dry weather in North Minnesota, Minnesota, subjected to time varying temperature, RH, and surface Cl− concentrations.

composite theory↗

DOE OSTI2023

Evaluating Mesoscale Convective Systems Over the US in Conventional and Multiscale Modeling Framework Configurations of E3SMv1

Organized mesoscale convective systems (MCSs) contribute a significant amount of precipitation in the Central and Eastern US during spring and summer, which impacts the availability of freshwater and flooding events. However, current global Earth system models cannot capture MCSs well and misrepresent the statistics of precipitation in the region. In this study, we investigate the representation of MCSs in three configurations of the Energy Exascale Earth System Model (E3SMv1) by tracking individual storms based on outgoing longwave radiation using a new application of TempestExtremes. Our results indicate that conventional parameterizations of convection, implemented in both low (LR; ~150 km) and high (HR; ~25 km) resolution configurations, fail to capture almost all MCS-like events, in-part because they underestimate high-level cloud ice associated with deep convection. On the other hand, the multiscale modeling framework (MMF; cloud-resolving models embedded in each grid-column of ~150 km resolution E3SMv1) configuration represents MCSs and their annual cycle better. Nevertheless, relative to observations, the E3SMv1-MMF spatial distribution of MCSs and associated precipitation is shifted eastward, and the diurnal timing is lagged. A comparison between the large-scale environment in E3SMv1-MMF and ERA5 reanalysis suggests that the biases during the summer in E3SMv1-MMF are associated with biases in low-level humidity and meridional moisture transport within the low-level jet. The fact that conventional parameterizations of convection, even with high-resolution, cannot capture MCSs over the US suggests that methods with explicit representation of kilometer-scale convective organization, such as the MMF, may be necessary for improving the simulation of these convective systems.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Coupled Climate Simulations With E3SM‐MMF

Simulations of the recent historical period from 1950 to 2014 are conducted with E3SM‐MMF, which uses an embedded 2D cloud resolving model that runs efficiently on GPUs in place of traditional parameterizations for cloud and turbulence. Analysis of the climate and variability reveal several aspects where E3SM‐MMF produces smaller biases compared to E3SMv2, including better agreement with the observed evolution of global mean surface temperature, although the representation of ENSO is too weak and fast. Three idealized abrupt CO 2 experiments were also conducted to assess climate sensitivity and feedbacks. These yield three estimates of effective climate sensitivity (4.38, 5.21, and 6.06 K), with a corresponding spread in the shortwave cloud feedbacks. These estimates are on the higher end of sensitivity estimates from CMIP ensembles, and the spread indicates substantial state‐dependent feedbacks. These results demonstrate how multiscale modeling framework (MMF) models can be used for climate relevant experiments and projections by leveraging modern GPU enabled computational platforms. The unique qualities of E3SM‐MMF shown in previous literature are largely still present, but various instances of reduced biases suggest that MMF models have utility in improving future projections.

E3SM↗

NASA NTRS2020

Solution of the Nonlinear High-Fidelity Generalized Method of Cells Micromechanics Relations via Order-Reduction Techniques

The High-Fidelity Generalized Method of Cells (HFGMC) is one technique, distinct from traditional finite element approaches, for accurately simulating nonlinear composite material behavior. In this work, the HFGMC global system of equations for doubly-periodic repeating unit cells with nonlinear constituents has been reduced in size through the novel application of a Petrov-Galerkin Proper Orthogonal Decomposition order-reduction scheme in order to improve its computational efficiency. Order-reduced models of an E-glass/Nylon 12 composite led to a 4.8 to 6.3x speedup in the equation assembly/solution runtime while maintaining model accuracy. This corresponded to a 21 to 38 percent reduction in total runtime. The significant difference in assembly/solution and total runtimes was attributed to the evaluation of integration point inelastic field quantities; this step was identical between the unreduced and order-reduced models. Nonetheless, order-reduced techniques offer the potential to significantly improve the computational efficiency of multiscale calculations.

Ricks, Trenton M.↗

DOE OSTI2022

The Schwarz alternating method for transient solid dynamics

Abstract In our earlier work, we formulated the Schwarz alternating method as a means for concurrent multiscale coupling in finite deformation solid mechanics for quasi‐static problems. Herein, we advance this method for the study of transient dynamic multiscale solid mechanics problems where information is exchanged back and forth between small and large scales. The extension to dynamics relies on the notion of a global time stepper. Within each global time step, the subdomains are coupled by the standard Schwarz iterative process. Remarkably, each subdomain can use its own time step or even its own time integrator to advance its solution in time, provided that they synchronize at each global time step. We study the performance of the Schwarz method on several examples designed for this purpose. Our numerical experiments demonstrate that the method is capable of coupling regions with different mesh resolutions, different element types, and different time integration schemes (e.g., implicit and explicit), all without introducing any artifacts that afflict other coupling methods for transient dynamics. Finally, we apply the dynamic Schwarz alternating method to the simulation of a bolted joint subjected to dynamic loading, as a demonstration of the performance of the method in a realistic scenario.

Mota, Alejandro↗

DOE OSTI2020

Multiscale modeling of shear banding in metallic glasses (Final report)

Metallic glasses (MGs) possess remarkably high strength but suffer from minimal tensile ductility due to the formation of catastrophic shear bands. The goal of this research project is to develop an understanding of the microstructures and deformation mechanisms that control shear banding in MGs, which will enable the development of MGs with enhanced plasticity. Two scientific objectives have been pursued. (1) Understand the underlying mechanisms of shear banding phenomena in presence of nanoscale heterogeneities in MGs. (2) Understand the evolution of MG heterogenous structure upon thermomechanical stimuli for plasticity enhancement through controlling and distributing multiple shear bands.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Scale interactions and anisotropy in Rayleigh–Taylor turbulence

We study energy scale transfer in Rayleigh–Taylor (RT) flows by coarse graining in physical space without Fourier transforms, allowing scale analysis along the vertical direction. Two processes are responsible for kinetic energy flux across scales: baropycnal work Λ, due to large-scale pressure gradients acting on small scales of density and velocity; and deformation work Π, due to multiscale velocity. Our coarse-graining analysis shows how these fluxes exhibit self-similar evolution that is quadratic-in-time, similar to the RT mixing layer. We find that Λ is a conduit for potential energy, transferring energy non-locally from the largest scales to smaller scales in the inertial range where Π takes over. In three dimensions, Π continues a persistent cascade to smaller scales, whereas in two dimensions Π rechannels the energy back to larger scales despite the lack of vorticity conservation in two-dimensional (2-D) variable density flows. This gives rise to a positive feedback loop in 2-D RT (absent in three dimensions) in which mixing layer growth and the associated potential energy release are enhanced relative to 3-D RT, explaining the oft-observed larger α values in 2-D simulations. Despite higher bulk kinetic energy levels in two dimensions, small inertial scales are weaker than in three dimensions. Moreover, the net upscale cascade in two dimensions tends to isotropize the large-scale flow, in stark contrast to three dimensions. Furthermore, our findings indicate the absence of net upscale energy transfer in three-dimensional RT as is often claimed; growth of large-scale bubbles and spikes is not due to ‘mergers’ but solely due to baropycnal work Λ.

42 ENGINEERING↗

NASA NTRS2011

Comparison of Magnetospheric MultiScale (MMS) Formation Design Algorithms

The MMS mission consists of four identical spinning spacecraft in a tetrahedron-like formation during predefined orbital regions-of-interest [1]. The MMS formation will fly about a highly eccentric orbit to study magnetic reconnection in the Earth.s magnetosphere. The mission is divided in two main science phases of markedly different orbit size. Phase 1 is a 1.2 R(sub E) x 12 R(sub E) (R(sub E) equals one Earth radius) orbit phase where science will be performed on the day-side of the magnetosphere, and Phase 2 is a 1.2 R(sub E) x 25 R(sub E) orbit phase where science will be performed on the night-side of the magnetosphere. For each phase, the MMS formation initially will fly a series of tetrahedron sizes ranging between 10-km and 400-km to assist the science team in determining the best value for the remainder of the phase. This paper presents a preliminary comparison of the algorithms currently available to determine desired MMS formation states. After a brief description of the MMS formation flying metrics and associated requirements, the five formation design algorithm combinations considered here are presented. Monte Carlo simulations determine the performance of each algorithm defined in terms of formation lifetime and fuel consumption. Preliminary results focusing on the smaller formation size for Phase 1 are discussed and the conclusions are presented along with indications for future work.

Mann, L.↗

DOE OSTI2023

New formation and fate of Isoprene SOA markers revealed by field data-constrained modeling

Particulate 2-methyltetrols (2-MT) and 2-methylglyceric acid (2-MG) are typically used to indicate the abundance of isoprene-derived secondary organic aerosols (SOA). However, their formation and fate are not fully understood. In this study, we showed that particulate 2-MT and 2-MG collected at multiple monitoring sites under a wide range of atmospheric and emission conditions, with concentrations spanning six orders of magnitudes, are well reproduced with an expanded isoprene-SOA scheme implemented into the Community Multiscale Air Quality (CMAQ) model. The scheme considers their three-phase (gas-aqueous-organic phase) partitioning, formation from acid-driven multiphase reactions, and degradation by OH radicals in the gas and aqueous phases. The model results reveal that a non-aqueous formation pathway or direct biogenic emission is needed to supplement the commonly assumed acid-driven multiphase reaction process to explain the observed 2-MT concentrations. This missing pathway contributes to 20–40% of 2-MT in areas with aerosol pH < 2 and more than 70% under less acidic conditions (pH~2–5), such as those encountered in the western US and China. The typical summertime gas-phase photochemical lifetimes of 2-MT and 2-MG are estimated to be 4–6 and 20–30 h, respectively, and their aqueous lifetimes are approximately 20–40 h. Our simulations show that predicted 2-MT is mainly influenced by its aqueous phase loss to OH, but 2-MG is more sensitive to gas phase OH loss due to the preferential partitioning of the two tracers in the aqueous and gas phases, respectively.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

GrainPaint: A multi-scale diffusion-based generative model for microstructure reconstruction of large-scale objects

Simulation-based approaches to microstructure generation can suffer from a variety of limitations, such as high memory usage, long computational times, and difficulties in generating complex geometries. Generative machine learning models present a way around these issues, but they have previously been limited by the fixed size of their generation area. Here, we present a new microstructure generation methodology leveraging advances in inpainting using denoising diffusion models to overcome this generation area limitation. We show that microstructures generated with the presented methodology are statistically similar to grain structures generated with a kinetic Monte Carlo simulator, SPPARKS.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Low-Resolution Models for the Interaction Dynamics of Coated Gold Nanoparticles with β2-microglobulin

A large number of low-resolution models have been proposed in the last decades to reduce the computational cost of molecular dynamics simulations for bio-nano systems, such as those involving the interactions of proteins with functionalized nanoparticles (NPs). For the proteins, “minimalist” models at the one-bead-per residue (Cα-based) level and with implicit solvent are well established. For the gold NPs, widely explored for biotechnological applications, mesoscale (MS) models treating the NP core with a single spheroidal object are commonly proposed. In this representation, the surface details (coating, roughness, etc.) are lost. These, however, and the specificity of the functionalization, have been shown to have fundamental roles for the interaction with proteins. We presented a mixed-resolution coarse-grained (CG) model for gold NPs in which the surface chemistry is reintroduced as superficial smaller beads. We compared molecular dynamics simulations of the amyloid β2-microglobulin represented at the minimalist level interacting with NPs represented with this model or at the MS level. Our finding highlights the importance of describing the surface of the NP at a finer level as the chemical-physical properties of the surface of the NP are crucial to correctly understand the protein-nanoparticle association.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Bridging Scales to Model Reactive Diffusive Transport in Porous Media

Published by ECS. Two novel scale-bridging algorithms to model reaction-diffusion transport in porous media are presented. The algorithms are based on direct numerical simulations and couple the information of a micro-scale model, which accounts for the large field of view provided by micro X-ray computed tomography (X-ray CT), and a nano-scale model, which locally resolves transport in the fine structure extracted from nano X-ray CT. The micro-scale model is discretized in the through-plane direction into a 1D grid, where effective properties and internal boundaries are determined based on the results from the nano-scale model. The validated algorithms are used to examine transport of oxygen in precious group metal-free electrodes considering both zero- and first-order kinetics. Unlike conventional methods, the results show that the effective diffusivity is not a passive property but increases in regions where the reaction-rate coefficient is large. The proposed algorithms account for the multiscale coupling of reaction-diffusion transport and material microstructure, thus improving the predictions compared to conventional methods.

42 ENGINEERING↗

NASA NTRS2009

A Continuum-Atomistic Analysis of Transgranular Crack Propagation in Aluminum

A concurrent multiscale modeling methodology that embeds a molecular dynamics (MD) region within a finite element (FEM) domain is used to study plastic processes at a crack tip in a single crystal of aluminum. The case of mode I loading is studied. A transition from deformation twinning to full dislocation emission from the crack tip is found when the crack plane is rotated around the [111] crystallographic axis. When the crack plane normal coincides with the [112] twinning direction, the crack propagates through a twinning mechanism. When the crack plane normal coincides with the [011] slip direction, the crack propagates through the emission of full dislocations. In intermediate orientations, a transition from full dislocation emission to twinning is found to occur with an increase in the stress intensity at the crack tip. This finding confirms the suggestion that the very high strain rates, inherently present in MD simulations, which produce higher stress intensities at the crack tip, over-predict the tendency for deformation twinning compared to experiments. The present study, therefore, aims to develop a more realistic and accurate predictive modeling of fracture processes.

Yamakov, V.↗

DOE OSTI2026

Revealing EDL-driven reduction mechanisms in binary, ternary, and quaternary fluorinated electrolytes via an integrated MD–DFT–ML framework

Accurately predicting solid electrolyte interphase (SEI) formation requires explicitly resolving the electric double layer (EDL) structure, which deviates significantly from that of the bulk electrolyte. Although an established molecular dynamics (MD) and Density Functional Theory (DFT) framework can model SEI formation by evaluating reduction reactions of local clusters in the EDL, it suffers from a combinatorial computational bottleneck. To overcome this limitation, we introduce a machine-learning-accelerated simulation workflow (MD–DFT–ML), integrating a gradient-boosted regression model trained on EDL composition data to efficiently predict reduction potentials. We apply this framework to seven fluorinated electrolytes comprising fluorinated anions, a fluorinated ester solvent, two types of diluent (ion-solvating ester vs. non-solvating ether), and an FEC additive. The analysis shows that the EDL selectively accumulates cation-binding species; consequently, the non–cation-binding ether diluent rarely enters the EDL and makes minimal contributions to SEI formation. DFT calculations on statistically representative EDL clusters provide reduction potentials and fluorine-release pathways, while the ML model, which substantially reduces the DFT workload, predicts cluster reduction energies with a mean absolute error of 0.1 eV. The combined MD–DFT–ML approach also quantifies contributions from different sources to LiF formation in the SEI. This methodology establishes a generalizable route for multiscale modeling electrolyte and interphase design for next-generation electrochemical energy-storage systems.

DFT-MD-ML workflow↗

DOE OSTI2024

Accelerating multiscale electronic stopping power predictions with time-dependent density functional theory and machine learning

Knowing the rate at which particle radiation releases energy in a material, the “stopping power,” is key to designing nuclear reactors, medical treatments, semiconductor and quantum materials, and many other technologies. While the nuclear contribution to stopping power, i.e., elastic scattering between atoms, is well understood in the literature, the route for gathering data on the electronic contribution has for decades remained costly and reliant on many simplifying assumptions, including that materials are isotropic. We establish a method that combines time-dependent density functional theory (TDDFT) and machine learning to reduce the time to assess new materials to hours on a supercomputer and provide valuable data on how atomic details influence electronic stopping. Our approach uses TDDFT to compute the electronic stopping from first principles in several directions and then machine learning to interpolate to other directions at a cost of 10 million times fewer core-hours. We demonstrate the combined approach in a study of proton irradiation in aluminum and employ it to predict how the depth of maximum energy deposition, the “Bragg Peak,” varies depending on the incident angle—a quantity otherwise inaccessible to modelers and far outside the scales of quantum mechanical simulations. The lack of any experimental information requirement makes our method applicable to most materials, and its speed makes it a prime candidate for enabling quantum-to-continuum models of radiation damage. The prospect of reusing valuable TDDFT data for training the model makes our approach appealing for applications in the age of materials data science.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Design, fabrication, and testing of a water-cooled tungsten-foam high-heat flux plasma-facing module

Here, we present a comprehensive study detailing the design, fabrication and testing a new modular “finger” component, featuring a hexagonal tungsten foam armor tile bonded to the top surface of the water-cooled finger unit. The mechanical, thermal, and particle transport properties of the tungsten foam armor were determined for a wide range of porosity and cell size, and then combined in an equivalent solid material with “effective” properties suitable for large-scale simulations. A series of 3-D multiphysics simulations for coupled thermal and mechanical behavior of the “finger” module are used to optimize the design before fabrication. The simulation results show that, for the expected experimental conditions, a safe range of heat flux and foam porosity is possible for both water-cooling and helium-cooling. Based on these multiphysics simulations, an optimum finger cooling module has been fabricated at Ultramet, Inc. A series of experiments were designed to study the thermomechanical performance of the “finger” unit under steady-state and transient thermal loading at surface heat flux up to 16 MW/m 2 in the High Energy Flux Test facility (HEFTY) at UCLA. Testing conditions included low-power, steady-state plasma exposure at 6 MW/m 2 , followed by severe high heat flux cycles at 16 MW/m 2 . Results of these tests are explained through comparisons with multiphysics simulations. To eliminate the effects of thermomechanical damage carried out on a module on its thermo-mechanical response on a subsequent test, three different yet identically designed and fabricated finger modules were tested. The results show that the current design is capable of cooling the walls of fusion devices at surface heat flux up to 6 MW/m 2 without failure, and that the failure heat flux limit is below 16 MW/m 2 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2026

Group-Additivity–Embedded Multiscale Modeling for Electric Field-Enhanced Nanocatalysis

Elucidating structure-performance relationships remains a central challenge in field-enhanced catalysis, where nanoparticles exhibit nonuniform surface sites with site-dependent responses to electric fields. Low-coordination sites (edges, corners, and tips) are particularly electric field-sensitive (EF), leading to nonuniform charge distribution, adsorption energies, and catalytic activity. Here, using ammonia decomposition on a ruthenium cluster as a model system, we develop a transferable multiscale framework integrating density functional theory, group additivity (GA), Brønsted-Evans-Polanyi scaling, and microkinetic modeling to predict EF-dependent activity across nonuniform cluster sites. Across sites and fields, the nitrogen adsorption energy (E N ) emerges as the governing descriptor, yielding robust volcano relationships whose optimum shifts systematically with field: negative fields strengthen N binding via electron accumulation, while positive fields weaken N binding via charge depletion, moving the optimal E N toward weaker binding. Microkinetic analysis shows that N≡N bond formation remains the key kinetic bottleneck over most conditions; positive fields lower the effective barrier and, critically, increase the fraction of near-optimal active sites, leading to a net enhancement in overall activity relative to zero-field and negative-field cases. By capturing EF- and site-dependent energetics with high accuracy and low computational cost, this GA-embedded multi-scale simulation workflow provides a physically interpretable route to predict and design field-enhanced nanocatalysis.

ammonia decomposition↗