Search NASA⌕ Search

SEARCH · Search NASA

Results for “Optical Absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

X-ray irradiation-induced ionization of CdS{sub 1-x}Se{sub x} nanocrystals embedded in borosilicate glass

Optical absorption spectra of x-ray irradiated CdS{sub 1-x}Se{sub x} nanocrystals embedded in a borosilicate glass matrix are studied. The observed transformation of the confinement-related features in the spectra is related to the x-ray-induced negative ionization of the nanocrystals with charge transfer across the nanocrystal/matrix interface. The radiation-induced changes and their relaxation upon postirradiation storage as a function of nanocrystal size and composition are discussed.

36 MATERIALS SCIENCE↗

p-type conduction in sputtered indium oxide films

We report p-type conductivity in intrinsic indium oxide (IO) films deposited by magnetron sputtering on fused quartz substrates under oxygen-rich ambient. Highly oriented (111) films were studied by x-ray diffraction, optical absorption, and Hall effect measurements. We fabricated p-n homojunctions on these films.

36 MATERIALS SCIENCE↗

Low gap amorphous GaN{sub 1-x}As{sub x} alloys grown on glass substrate

Amorphous GaN{sub 1-x}As{sub x} layers with As content in the range of x=0.1 to 0.6 were grown by molecular beam epitaxy on Pyrex glass substrate. These alloys exhibit a wide range of band gap values from 2.2 to 1.3 eV. We found that the density of the amorphous films is {approx}0.8-0.85 of their corresponding crystalline value. These amorphous films have smooth morphology, homogeneous composition, and sharp well defined optical absorption edges. The measured band gap values for the crystalline and amorphous GaN{sub 1-x}As{sub x} alloys are in excellent agreement with the predictions of the band anticrossing model. The high absorption coefficient of {approx}10{sup 5} cm{sup -1} for the amorphous GaN{sub 1-x}As{sub x} films suggests that relatively thin films (on the order of 1 {mu}m) are necessary for photovoltaic application.

36 MATERIALS SCIENCE↗

Structural and optical properties of dilute InAsN grown by molecular beam epitaxy

We perform a structural and optical characterization of InAs{sub 1-x}N{sub x} epilayers grown by molecular beam epitaxy on InAs substrates (x < or approx. 2.2%). High-resolution x-ray diffraction (HRXRD) is used to obtain information about the crystal quality and the strain state of the samples and to determine the N content of the films. The composition of two of the samples investigated is also obtained with time-of-flight secondary ion mass spectroscopy (ToF-SIMS) measurements. The combined analysis of the HRXRD and ToF-SIMS data suggests that the lattice parameter of InAsN might significantly deviate from Vegard's law. Raman scattering and far-infrared reflectivity measurements have been carried out to investigate the incorporation of N into the InAsN alloy. N-related local vibrational modes are detected in the samples with higher N content. The origin of the observed features is discussed. We study the compositional dependence of the room-temperature band gap energy of the InAsN alloy. For this purpose, photoluminescence and optical absorption measurements are presented. The results are analyzed in terms of the band-anticrossing (BAC) model. We find that the room-temperature coupling parameter for InAsN within the BAC model is C{sub NM}=2.0{+-}0.1 eV.

36 MATERIALS SCIENCE↗

Fabrication Of Nano-Silver Thin Films Using Self Assembly And Its Interaction With Proteins

The silver nanoparticle thin films were prepared with an aim to use them for sensing of biomolecules. The monolayers of arachidic acid were deposited on glass plates by Langmuir Blodgett (LB) technique and silver nanoparticles thin films were deposited within the arachidic acid films. Small angle XRD studies confirm the formation of ordered array of nanoparticles. These thin films were treated with a model protein, bovine serum albumin (BSA a natural protein). From the optical absorption spectra a shift in the intensity as well as lambda max ({lambda}max) could be observed when silver thin films were treated with BSA.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dye-Sensitization Of Nanocrystalline ZnO Thin Films

Nannocrystalline and nanoporus thin films of ZnO were synthesized on glass substrates by using wet chemical drop casting method. X-ray diffraction measurements on these samples confirmed the formation of ZnO nanocrystallites in hexagonal wurtzite phase with mean size of {approx}20 nm. Photo sensitization of these nanostructured ZnO thin films was carried out using three types of dyes Rhodamine 6 G, Chlorophyll and cocktail of Rhodamine 6 G and Chlorophyll in 1:1 ratio. Dye sensitized ZnO thin films showed enhanced optical absorption in visible spectral region compared to the pristine ZnO thin films.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Quantum mechanical study of the coupling of plasmon excitations to atomic-scale electron transport

The coupling of optical excitation and electron transport through a sodium atom in a plasmonic dimer junction is investigated using time-dependent density functional theory. The optical absorption and dynamic conductance is determined as a function of gap size. Surface plasmons are found to couple to atomic-scale transport through several different channels including dipolar, multipolar, and charge transfer plasmon modes. These findings provide insight into subnanoscale couplings of plasmons and atoms, a subject of general interest in plasmonics and molecular electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactive hydroxyl radical-driven oral bacterial inactivation by radio frequency atmospheric plasma

We demonstrated bacterial (Streptococcus mutans) inactivation by a radio frequency power driven atmospheric pressure plasma torch with H{sub 2}O{sub 2} entrained in the feedstock gas. Optical emission spectroscopy identified substantial excited state OH generation inside the plasma and relative OH formation was verified by optical absorption. The bacterial inactivation rate increased with increasing OH generation and reached a maximum 5-log{sub 10} reduction with 0.6%H{sub 2}O{sub 2} vapor. Generation of large amounts of toxic ozone is drawback of plasma bacterial inactivation, thus it is significant that the ozone concentration falls within recommended safe allowable levels with addition of H{sub 2}O{sub 2} vapor to the plasma.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Location of trivalent lanthanide dopant energy levels in (Lu{sub 0.5}Gd{sub 0.5}){sub 2}O{sub 3}

The location of Ln{sup 3+} dopant energy levels relative to bands in (Lu{sub 0.5}Gd{sub 0.5}){sub 2}O{sub 3} was studied. A several-steps analysis of XPS measurements on heavy lanthanides sesquioxides Ln{sub 2}O{sub 3} (Ln = Gd, Tb, Dy, Er, Tm, Yb, Lu) and on Sc{sub 2}O{sub 3} and Y{sub 2}O{sub 3} reference materials were used to locate Ln{sup 3+} dopant ground state relative to the top of the valence band in (Lu{sub 0.5}Gd{sub 0.5}){sub 2}O{sub 3} within an error bar of {+-}0.4 eV. The agreement between XPS data and model was found improved relative to previous studies. When compared to XPS analysis, prediction based on optical absorption shows a slight underestimation attributed to the lack of precision in Ce{sup 4+} charge transfer band measurement.

36 MATERIALS SCIENCE↗

Thiols as Effective Capping Molecules to Synthesize High-Quality ZnO Nanocrystals

In our present work, an alternative approach to synthesize Zinc oxide (ZnO) quantum dots (QDs) using simple aqueous route under ambient conditions is reported. ZnO QDs were synthesized using zinc nitrate as a precursor and different thiols as effective capping molecules. The synthesized powders were characterized by XRD and UV-Vis optical absorption. The XRD results indicated that as synthesized ZnO QDs had pure hexagonal wurtzite structure and 2-ME capped ZnO QDs gives smallest sized nanoparticles. All these nanoparticles emit clearly visible blue emission under UV lamp.

36 MATERIALS SCIENCE↗

Direct observation of heat dissipation in individual suspended carbon nanotubes using a two-laser technique

A two-laser technique is used to investigate heat spreading along individual single walled carbon nanotube (SWCNT) bundles in vacuum and air environments. A 532 nm laser focused on the center of a suspended SWCNT bundle is used as a local heat source, and a 633 nm laser is used to measure the spatial temperature profile along the SWCNT bundle by monitoring the G band downshifts in the Raman spectra. A constant temperature gradient is observed when the SWCNT bundle is irradiated in vacuum, giving direct evidence of diffusive transport of the phonons probed by the Raman laser. In air, however, we observe an exponentially decaying temperature profile with a decay length of about 7 {mu}m, due to heat dissipation from the SWCNT bundle to the surrounding gas molecules. The thermal conductivity of the suspended carbon nanotube (CNT) is determined from its electrical heating temperature profile as measured in vacuum and the nanotube bundle diameter measured via transmission electron microscopy. Based on the exponential decay curves measured in three different CNTs in air, the heat transfer coefficient between the SWCNTs and the surrounding air molecules is found to range from 1.5 x 10{sup 3} to 7.9 x 10{sup 4} W/m{sup 2} K, which is smaller than the 1 x 10{sup 5} W/m{sup 2} K thermal boundary conductance value calculated using the kinetic theory of gases. This measurement is insensitive to the thermal contact resistance, as no temperature drops occur at the ends of the nanotube. It is also insensitive to errors in the calibration of the G band temperature coefficient. The optical absorption is also obtained from these results and is on the order of 10{sup -5}.

36 MATERIALS SCIENCE↗

Effect of compressive stress on stability of N-doped p-type ZnO

Nitrogen-doped p-type zinc oxide (p-ZnO:N) thin films were fabricated on a-/c-plane sapphire (a-/c-Al{sub 2}O{sub 3}) by plasma-assisted molecular beam epitaxy. Hall-effect measurements show that the p-type ZnO:N on c-Al{sub 2}O{sub 3} degenerated into n-type after a preservation time; however, the one grown on a-Al{sub 2}O{sub 3} showed good stability. The conversion of conductivity in the one grown on c-Al{sub 2}O{sub 3} ascribed to the faster disappearance of N{sub O} and the growing N{sub 2(O)}, which is demonstrated by x-ray photoelectron spectroscopy (XPS). Compressive stress, caused by lattice misfit, was revealed by Raman spectra and optical absorption spectra, and it was regarded as the root of the instability in ZnO:N.

36 MATERIALS SCIENCE↗

Modeling pulsed-laser melting of embedded semiconductor nanoparticles

Pulsed-laser melting (PLM) is commonly used to achieve a fast quench rate in both thin films and nanoparticles. A model for the size evolution during PLM of nanoparticles confined in a transparent matrix, such as those created by ion-beam synthesis, is presented. A self-consistent mean-field rate equations approach that has been used successfully to model ion beam synthesis of germanium nanoparticles in silica is extended to include the PLM process. The PLM model includes classical optical absorption, multiscale heat transport by both analytical and finite difference methods, and melting kinetics for confined nanoparticles. The treatment of nucleation and coarsening behavior developed for the ion beam synthesis model is modified to allow for a non-uniform temperature gradient and for interacting liquid and solid particles with different properties. The model allows prediction of the particle size distribution after PLM under various laser fluences, starting from any particle size distribution including as-implanted or annealed simulated samples. A route for narrowing the size distribution of embedded nanoparticles is suggested, with simulated distribution widths as low as 15% of the average size.

36 MATERIALS SCIENCE↗

Band gap engineering in BiNbO{sub 4} for visible-light photocatalysis

We have investigated the electronic structure of anionic mono- (S, N, and C) and co-doping (N-N, C-N, S-C, and S-N) on BiNbO{sub 4} for the visible-light photocatalysis. The maximum band gap reduction of pure BiNbO{sub 4} is possible with the (C-S) co-doping and minimum with N mono-doping. The calculated binding energies show that the co-doped systems are more stable than their mono-doped counterparts. Our optical absorption curves indicate that the mono- (C) and co-anionic doped (N-N and C-S) BiNbO{sub 4} systems are promising materials for visible light photocatalysis.

36 MATERIALS SCIENCE↗

Partially filled intermediate band of Cr-doped GaN films

We investigated the band structure of sputtered Cr-doped GaN (GaCrN) films using optical absorption, photoelectron yield spectroscopy, and charge transport measurements. It was found that an additional energy band is formed in the intrinsic band gap of GaN upon Cr doping, and that charge carriers in the material move in the inserted band. Prototype solar cells showed enhanced short circuit current and open circuit voltage in the n-GaN/GaCrN/p-GaN structure compared to the GaCrN/p-GaN structure, which validates the proposed concept of an intermediate-band solar cell.

36 MATERIALS SCIENCE↗

Effect of proton bombardment on InAs dots and wetting layer in laser structures

The effect of proton bombardment on carrier lifetime and photoluminescence of InAs quantum dots was measured. Optical absorption and transmission electron microscopy show the dots retain their integrity under bombardment. A decrease in ground state photoluminescence with increasing dose is not explained by the decrease in dot carrier lifetime alone, but also by bombardment-induced non-radiative recombination in the wetting layer, which reduces the dot electron population at fixed excitation. To exploit the relative radiation immunity of quantum dots, it is necessary to maximise the dot density and capture probability per dot to minimize the effect of wetting layer recombination.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Energy transfer kinetics in oxy-fluoride glass and glass-ceramics doped with rare-earth ions

An investigation of donor-acceptor energy transfer kinetics in dual rare earths doped precursor oxy-fluoride glass and its glass-ceramics containing NaYF{sub 4} nano-crystals is reported here, using three different donor-acceptor ion combinations such as Nd-Yb, Yb-Dy, and Nd-Dy. The precipitation of NaYF{sub 4} nano-crystals in host glass matrix under controlled post heat treatment of precursor oxy-fluoride glasses has been confirmed from XRD, FESEM, and transmission electron microscope (TEM) analysis. Further, the incorporation of dopant ions inside fluoride nano-crystals has been established through optical absorption and TEM-EDX analysis. The noticed decreasing trend in donor to acceptor energy transfer efficiency from precursor glass to glass-ceramics in all three combinations have been explained based on the structural rearrangements that occurred during the heat treatment process. The reduced coupling phonon energy for the dopant ions due to fluoride environment and its influence on the overall phonon assisted contribution in energy transfer process has been illustrated. Additionally, realization of a correlated distribution of dopant ions causing clustering inside nano-crystals has also been reported.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetron-sputter deposition of high-indium-content n-AlInN thin film on p-Si(001) substrate for photovoltaic applications

Al{sub 0.278}In{sub 0.722}N thin films have been grown on p-type Si(001) and c-plane sapphire substrates by employing radio-frequency magnetron-sputter deposition at elevated temperatures. High-resolution x-ray diffraction, as well as pole-figure measurements, reveals no phase separation of the thin films. The Al{sub 0.278}In{sub 0.722}N film grown on p-Si(001) substrate is a typical fiber-texture with AlInN(0001)//Si(001) while that on the c-sapphire exhibits the onset of epitaxy. Microscopic studies reveal that the growth is dominated by a columnar mechanism and the average columnar grain diameter is about 31.5 and 50.8 nm on p-Si(001) and c-sapphire substrates, respectively. Photoluminescence at room-temperature exhibits a strong emission peak at 1.875 eV, smaller than the optical absorption edge (2.102 eV) but larger than the theoretical bandgap energy (1.70 eV), which is attributable to the band-filling effect, as is supported by the high electron density of 4.5 Multiplication-Sign 10{sup 20} cm{sup -3}. The n-Al{sub 0.278}In{sub 0.722}N/p-Si(001) heterostructure is tested for solar cells and the results are discussed based on the I-V characteristics and their fittings.

36 MATERIALS SCIENCE↗