Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHASE STUDIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Effects of bond character on the electronic structure of brownmillerite-phase oxides, Ca[subscript 2] [prime]B[subscript x]Fe[subscript 2-x]O[subscript 5] (B = Al, Ga): an X-ray absorption and electron energy loss spectroscopic study

Brownmillerite-phase transition-metal oxides, Ca{sub 2}B'{sub x}Fe{sub 2-x}O{sub 5} (B' = Al, Ga), have been examined by use of X-ray absorption near-edge spectroscopy (XANES) and electron energy loss spectroscopy (EELS). These studies were performed to examine how the electronic structure was affected as a more (Ga) or less (Al) electronegative metal was substituted for Fe. The oxygen deficient perovskite-like structure is built up of alternating layers having either octahedrally or tetrahedrally coordinated metal atoms. Analysis of the Fe L-, Ga K-, and Al L-edge XANES and EELS spectra confirmed that the group III metals substitute primarily into the tetrahedral site, regardless of the size of the atoms. Through examination of O K-edge spectra, compared to LMTO calculated crystal orbital Hamilton population plots, the change in O-metal bond character with substitution was investigated. It was found that in Ca{sub 2}Ga{sub x}Fe{sub 2-x}O{sub 5}, the peaks in the O K-edge spectra resulting from an excitation of O 1s electrons into hybridized, unoccupied, O 2p-Ga 4p/4s antibonding states decreased in energy and increased in intensity with greater values of x. This is a result of the formation of more covalent O-Ga bonds. No shifts in energy were observed in O K-edge spectra from Ca{sub 2}Al{sub x}Fe{sub 2-x}O{sub 5} as the more ionic O-Al states are overlapped by stronger O-Ca antibonding states. This study shows that the electronic structure of these materials is tunable through selective substitution of metals into the tetrahedral site.

36 MATERIALS SCIENCE↗

Nucleation-Suppressed Phase Stabilization in Fe–Au Nanoparticles

Four nanoparticle compositions, Fe–21, 35, 47, and 67 at. % Au, have been prepared to study the phase stability and solid-state transformation in confined Fe–Au nanoalloys. The formation of two phases, predicted from bulk thermodynamics, has been suppressed in all compositions. Instead, a single phase solid solution forms after heat treatment at 600 °C and slow cooling. However, bulk phase relationships, signified by the precipitation of α-Fe upon cooling, was observed in larger particles (>20 nm) with composition Fe–35 at. % Au. The suppression of the phase transformation/precipitation in small particles is explained thermodynamically, as the free energy decrease associated with the phase transformation does not exceed the increase in energy due to the introduction of an interphase interface (grain boundary) within the cluster. A general equation has been derived to predict the critical cluster size below which transformations are inhibited, which agrees well with the observed experimental results.

36 MATERIALS SCIENCE↗

Negative linear compressibility in Se at ultra-high pressure above 120 GPa

A series of in situ synchrotron X-ray diffraction (XRD) measurements were carried out, combined with first-principles calculations, to study structural phase transitions of selenium at high pressures and room temperature. Several phase transitions were observed, among which an isostructural phase transition was found at around 120 GPa for the first time. Evolved from the rhombohedral (space group R$\bar{3}$m) structure (Se-V), the new phase (Se-V') exhibited an interesting increase of lattice parameter a at pressures from 120 to 148 GPa, known as negative linear compressibility (NLC). The discovery of NLC behavior observed in this work is mainly attributed to the accuracy and fine steps controlled by the membrane system for in situ XRD data collected with an exposure time of 0.5 s. After 140 GPa, a body-centered cubic (b.c.c.) structure Se-VI (space group Im$\bar{3}$m) was formed, which remains stable up to 210 GPa, the highest pressure achieved in this study. The bulk moduli of phases Se-V, Se-V' and Se-VI were estimated to be 83 ± 2, 321 ± 2 and 266 ± 7 GPa, respectively, according to the P–V curve fit by the third-order Birch–Murnaghan equation of state. The Se-V' phase shows a bulk modulus almost 4 times larger than that of the Se-V phase, which is mainly due to the effect of its NLC. NLC in a higher pressure range is always more significant in terms of fundamental mechanism and new materials discovery, yet it has barely been reported at pressures above 100 GPa. This will hopefully inspire future studies on potential NLC behaviors in other materials at ultra-high pressure.

36 MATERIALS SCIENCE↗

Coexisting Multiple Martensites in Ni 57-x Mn 21+x Ga 22 Ferromagnetic Shape Memory Alloys: Crystal Structure and Phase Transition

A comprehensive study of the crystal structure and phase transition as a function of temperature and composition in Ni 57–x Mn 21+x Ga 22 (x = 0, 2, 4, 5.5, 7, 8) (at. %) magnetic shape memory alloys was performed by a temperature-dependent synchrotron X-ray diffraction technique and transmission electron microscopy. A phase diagram of this Ni 57–x Mn 21+x Ga 22 alloy system was constructed. The transition between coexisting multiple martensites with monoclinic and tetragonal structures during cooling was observed in the Ni 51.5 Mn 26.5 Ga 22 (x = 5.5) alloy, and it was found that 5M + 7M multiple martensites coexist from 300 K to 160 K and that 5M + 7M + NM multiple martensites coexist between 150 K and 100 K. The magnetic-field-induced transformation from 7M martensite to NM martensite at 140 K where 5M + 7M + NM multiple martensites coexist before applying the magnetic field was observed by in situ neutron diffraction experiments. The present study is instructive for understanding the phase transition between coexisting multiple martensites under external fields and may shed light on the design of novel functional properties based on such phase transitions.

36 MATERIALS SCIENCE↗

Chiral NNLO sat descriptions of nuclear multipole resonances within the random-phase approximation

We study nuclear multipole resonances in the framework of the random-phase approximation by using the chiral potential NNLO sat . This potential includes two- and three-body terms that have been simultaneously optimized to low-energy nucleon-nucleon scattering data and selected nuclear structure data. Our main focuses have been the isoscalar monopole, isovector dipole, and isoscalar quadrupole resonances of the closed-shell nuclei, 4 He, 16,22,24 O, and 40,48 Ca. These resonance modes have been widely observed in experiment. In addition, we use a renormalized chiral potential Vlow-k, based on the N 3 LO two-body potential by Entem and Machleidt [Phys. Rev. C 68, 041001 (2011)]. This introduces a dependency on the cutoff parameter used in the normalization procedure as reported in previous works by other groups. While NNLO sat can reasonably reproduce observed multipole resonances, it is not possible to find a single cutoff parameter for the V low-k potential that simultaneously describes the different types of resonance modes. The sensitivity to the cutoff parameter can be explained by missing induced three-body forces in the calculations. Our results for neutron-rich 22,24 O show a mixing nature of isoscalar and isovector resonances in the dipole channel at low energies. We predict that 22 O and 24 O have low-energy isoscalar quadrupole resonances at energies lower than 5 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Concurrent Hyperfractionated Radiation Therapy and Chemotherapy in Locally Advanced (Stage III) Non-Small-Cell Lung Cancer: Single Institution Experience With 600 Patients

Purpose: Our institutional experience with the use of hyperfractionated radiation therapy (RT) alone or concurrently with chemotherapy (RT-CHT) in Stage III non-small-cell lung cancer was reviewed. Methods and Materials: Three phase III and two phase II studies included a total of 600 patients. Hyperfractionated RT alone was given to 127 patients, and hyperfractionated RT-CHT was given to 473 patients. RT doses were 64.8 Gy and 69.6 Gy (using 1.2 Gy twice daily) and 67.6 Gy (using 1.3 Gy twice daily). CHT consisted of concurrent administration of carboplatin and etoposide to 409 patients and concurrent administration of carboplatin and paclitaxel to 64 patients. Results: The median survival times were 19 months, 21 months, and 12 months for all, RT-CHT, and RT-only patients, respectively. The survival difference between the RT-CHT and RT group was significant (p < 0.0001). Four-year rates of local progression-free survival (LPFS) and distant metastasis-free survival (DMFS) were 29% and 35%, respectively, for the entire group. The RT-CHT group had significantly better LPFS rates than the RT group (31% for the RT-CHT group vs. 16% for the RT group; p = 0.0015) but not DMFS rates (36% for the RT-CHT group vs. 36% for the RT group, p = 0.0571). Acute high-grade esophagitis, pneumonitis, and hematological toxicities were seen most frequently and in 11%, 9%, and 12% of patients, respectively. Late high-grade esophageal and bronchopulmonary toxicity were each seen in 6% of patients. Conclusions: Compared to the majority of existing phase II and III studies, this study reconfirmed the excellent results achieved with concurrent RT-CHT, including low toxicity. Concurrent RT-CHT results in survival benefit primarily by increasing LPFS, not DMFS.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Effects of twin boundary mobility on domain microstructure evolution in magnetic shape memory alloys: Phase field simulation

Effects of twin boundary mobility on domain microstructure evolution during magnetic field-induced deformation in magnetic shape memory alloys are studied by phase field micromagnetic microelastic modeling. The simulations show that different twin boundary mobilities lead to drastically different domain microstructures and evolution pathways, yielding very different magnetization and strain responses, even with opposite signs. The study also reveals complex domain phenomena in magnetic shape memory alloys.

36 MATERIALS SCIENCE↗

Nanosized low-temperature phases of titanium(IV) oxide with anatase and η-phase structures: composition, structure, and photocatalytic properties

Nanosized low-temperature modifications of titanium(IV) oxide with the anatase and η-phase (TiO{sub 2–x}•mH{sub 2}O) structures were prepared by the sulfate method (pH <3) and for the first time characterized by a complex of methods (X-ray diffractometry, scanning electron microscopy, IR spectroscopy, Raman spectroscopy, differential scanning calorimetry, low-temperature sorption capacity of samples to nitrogen, and differentiating dissolution). The physicochemical properties of the modifications were compared. Differences in compositions of the surface and volumes of the samples, compositions and structures of the phases (structure of η-phase is superstructure to anatase), and microstructure elements (sizes of crystallites, nanoparticles, and specific surface area; volume of nano- and ultrananopores) were revealed. The region of η-phase stability was found in the coordinates of temperature (T = 50–95 °C) and hydrolysis duration (τ = 10–80 min) and temperature (T≤200 °C) and annealing duration (τ <6 h). The distinctions in the thermal behavior of the nanosized anatase and η-phase were studied. The photocatalytic activity (PCA) is determined by the physicochemical characteristics of the samples and phases and also by the composition and structure of the decomposed substrate. In the case of difenoxazole, the PCA is affected by the compositions of the samples, phases, and surface (the presence of OH groups) and specific surface area, whereas the composition of the samples and specific surface area affect the PCA in the case of thiamethoxam.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of calcium in ash on the corrosion performance of Ni-based alloys in simulated oxy-fuel environment

Increasing the efficiency of coal power plants requires raising the operating temperature above 650°C. However, coal ash can severely attack alloy materials at high temperature. For example, the corrosion rates of commercial Fe- and Ni-based alloys are generally greater than 2 mm/year at 750°C in the gas environment of oxy-fuel combustion. Thus, a critical study is needed to determine the effect of the constituents in the ash on corrosion and find an approach to reduce the corrosion rates in an ash-laden environment at high temperature. The role of CaO in the ash (typical of U.S. Western coal ash) has been investigated in laboratory exposure environments with various structural alloys. Detailed results are presented on weight change, scale thickness, internal penetration, microstructural characteristics of corrosion products, and the cracking of scales for the alloys after exposure at 750°C. The thermal stability of K3Al(SO4)3 under the environment of oxy-fuel combustion was determined by thermogravimetric analysis and differential thermal analysis. The reaction of this low melting temperature salt with the CaO-containing ash is discussed. In addition, we performed synchrotron nanobeam X-ray analysis to study the phase and chemical composition of the oxide layers on the alloy surface. Results from these studies are used to address the role of CaO in ash in the long-term corrosion performance of alloys.

36 MATERIALS SCIENCE↗

Effects of Chlorine in Ash on the Corrosion Performance of Ni-Based Alloys in a Simulated Oxy-Fuel Environment

Coal ash can severely attack alloy materials at high temperature. To understand coal ash corrosion, a critical study is needed to determine the effect of the elements in ash on corrosion and find an approach to reduce the corrosion rates in an ash environment at high temperature. Chlorine is a harmful element in coal. The role of chlorine in ash corrosion is investigated in simulated oxy-fuel environments. Long time tests up to 3000 hours were performed on various structural alloys at 750°C. Detailed results are presented on weight change, scale thickness, internal penetration, microstructural characteristics of corrosion products, and the cracking of scales for the alloys after exposure at 750°C for 3000h. In addition, we performed synchrotron nanobeam Furthermore X-ray analysis to study the phase and chemical composition of the oxide layers on the alloy surface. Results from these studies are used to address the role of chlorine in ash in the long-term corrosion performance of alloys. Nanobeam X-ray and SEM analyses indicate that chlorine can modify the diffusion mechanism near alloy surface, and increase corrosion rate.

01 COAL, LIGNITE, AND PEAT↗

Probing magnon–magnon coupling in exchange coupled Y 3 Fe 5 O 12 /Permalloy bilayers with magneto-optical effects

We demonstrate the magnetically-induced transparency (MIT) effect in Y 3 Fe 5 O 12 (YIG)/Permalloy (Py) coupled bilayers. The measurement is achieved via a heterodyne detection of the coupled magnetization dynamics using a single wavelength that probes the magneto-optical Kerr and Faraday effects of Py and YIG, respectively. Clear features of the MIT effect are evident from the deeply modulated ferromagnetic resonance of Py due to the perpendicular-standing-spin-wave of YIG. We develop a phenomenological model that nicely reproduces the experimental results including the induced amplitude and phase evolution caused by the magnon–magnon coupling. Our work offers a new route towards studying phase-resolved spin dynamics and hybrid magnonic systems

36 MATERIALS SCIENCE↗

Chiral extrapolation of pion-pion scattering phase shifts within standard and unitarized Chiral Perturbation Theory

We calculate the pion-pion elastic scattering phase shifts for pion masses from the chiral limit to values of interest for lattice studies. At low energies, we use the standard Chiral Perturbation Theory expressions to one and two loops. In addition, we study the phase shifts' mass dependence in the resonance region by means of dispersion theory in the form of unitarized Chiral Perturbation Theory and the inverse amplitude method. We pay particular attention to the case when resonances are close to threshold, illustrating the different behavior between scalar and vector resonances. We also provide the estimation of uncertainties, which are dominated by those of the O(p{sup 6}) chiral parameters.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Polarization effects and phase equilibria in high-energy-density polyvinylidene-fluoride-based polymers.

Using first-principles calculations, the phase diagrams of polyvinylidene fluoride (PVDF) and its copolymers under an applied electric field are studied and phase transitions between their nonpolar {alpha} and polar {beta} phases are discussed. The results show that the degree of copolymerization is a crucial parameter controlling the structural phase transition. In particular, for tetrafluoroethylene (TeFE) concentration above 12%, PVDF-TeFE is stabilized in the {beta} phase, whereas the {alpha} phase is stable for lower concentrations. As larger electric fields are applied, domains with smaller concentrations ({le} 12%) undergo a transition from the {alpha} to the {beta} phase until a breakdown field of {approx}600 MV m{sup -1} is reached. These structural phase transitions can be exploited for efficient storage of electrical energy.

36 MATERIALS SCIENCE↗

Inducing thermodynamically blocked atomic ordering via strongly driven nonequilibrium kinetics

Ultrafast light-matter interactions enable inducing exotic material phases by promoting access to kinetic processes blocked in equilibrium. Despite potential opportunities, actively using nonequilibrium kinetics for material discovery is limited by the poor understanding on intermediate states of driven systems. Here, using single-pulse time-resolved imaging with x-ray free-electron lasers, we found intermediate states of photoexcited bismuth nanoparticles that showed kinetically reversed surface ordering during ultrafast melting. This entropy-lowering reaction was further investigated by molecular dynamics simulations to reveal that observed kinetics were thermodynamically buried in equilibrium, which emphasized the critical role of electron-mediated ultrafast free-energy modification in inducing exotic material phases. This study demonstrated that ultrafast photoexcitations of electrons provide an efficient strategy to induce hidden material phases by overcoming thermodynamic barriers via nonequilibrium reaction pathways.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Heavy Ion Collisions: Baryon Density Frontier

Actual problems on studying the phase QCD diagram in current and planned experiments are discussed. The need for a systematic study of states of the hadronic matter in regions of high baryon density is emphasized. The opportunities opened by experiments at the NICA complex are considered.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

First-Principles Discovery of Novel LiInP 2 S 6 Polymorphs with Promising Optoelectronic Responses

Recent advances in two-dimensional (2D) van der Waals (vdW) metal thiophosphates have attracted considerable attention due to their promising ionic conductivity, optical characteristics, and tunable physical properties. Within this material family, LiInP 2 S 6 has emerged as an intriguing candidate, not only because of its sensitivity to air and moisture but also due to its suitable band gap within the UV−vis range, enabling potential optoelectronic and photocatalytic applications. In this study, through comprehensive first-principles investigations, we unveil two previously unreported polymorphs of LiInP 2 S 6 in the monoclinic C2/c and trigonal P3̅1c (in-gap) space groups, in addition to examining the experimentally synthesized P3̅1c (in-layer) phase. Our studies identify the C2/c structure as the ground state, lying 9 meV per unit cell lower in energy than the experimentally realized trigonal P3̅1c (in-layer) phase. Further, we systematically examine the elastic, mechanical, thermodynamical, dynamical, electronic, and optical properties of all three polymorphs, confirming their mechanical, thermal, and dynamical stability. Notably, the P3̅1c (in-gap) phase exhibits enhanced stiffness, while the calculated indirect band gaps and strong photon absorption in the UV−vis range (∼3 eV) highlight the potential of the studied LiInP 2 S 6 phases for iontronic devices and optoelectronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Suppressing η-phase development in steel-cemented tungsten carbide: A spark plasma sintering study

We describe the phase stability of a cemented tungsten carbide prepared using a high-vanadium tool steel as the cementing/binder phase and confirm suppression of (Fe, W) 6 C η-phase formation, attributed to the preferential formation of a V 0.78 W 0.22 C 1-x phase that exists as islands within the Fe-rich binder matrix. The samples were prepared using spark plasma sintering (SPS), starting from commercially available WC and A11-LVC tool steel powders. The starting powders were ball milled adding 10, 15, and 20 vol.% steel. An A11-LVC tool steel was chosen as a low-cost hard steel (49 HRC) that does not contain Ni or Co but has a high vanadium (~9 wt.%) and carbon (~1.75 wt.%) content. Our results show that sintering by SPS can produce high-density (>98%) WC-steel specimens in which the matrix wets the WC grain surfaces and formation of the brittle η-phase is avoided. The η phase is often regarded as embrittling and undesirable, and its presence can result in degradation of mechanical properties. Microhardness values for the WC-10 and WC-15 vol.% steel samples were 12.3 ± 1.2 and 13.0 ± 0.9 GPa, respectively, whereas the fracture toughness values were 8.83 ± 0.48 and 8.81 ± 0.61 MPa·m 1/2 , respectively.

36 MATERIALS SCIENCE↗

Phase stability and transformation in a light-weight high-entropy alloy

Light-weight high-entropy alloys (HEAs) with a vast alloy-design space have offered new avenues to explore novel low-cost, high strength-to-weight ratio structural materials. Studying their phase stability and possible transformations is critical for designing microstructures for optimal material properties. However, the complex local atomic environment of HEAs poses challenges to the fundamental understanding of phase stability and transformation behaviors. The present paper investigates the phase stability and transformation behaviors of a newly-designed light-weight Al 1.5 CrFeMnTi HEA by integrated experimental and theoretical approaches. The coherent precipitation of the L2 1 phase within the body-centered-cubic (BCC) matrix at intermediate temperatures was observed, and the size, shape, coherency, and spatial distribution of the L2 1 phase were subsequently altered through selected annealing treatments. Moreover, the CALculation of PHAse Diagrams (CALPHAD) and first-principle calculations successfully optimize the compositions of light-weight HEAs with a coherent BCC/L2 1 two-phase structure. Finally, shed light by the present study, novel light-weight HEAs, featuring the lower density (below 6 g/cm 3 ) and cost, can be designed for high-temperature applications.

36 MATERIALS SCIENCE↗