Search NASA⌕ Search

SEARCH · Search NASA

Results for “Panelized”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Effect of low-speed impact damage and damage location on behavior of composite panels

The effect of low speed impact damage on the compression and tension strength of thin and moderately thick composite specimens was investigated. Impact speed ranged from 50 to 550 ft./sec., with corresponding impact energies from 0.25 to 30.7 ft. x lb. Impact locations were near the center of the specimen or near a lateral unloaded edge. In this study, thin specimens with only 90 degree and + or - 45 degree plies that were impacted away from the unloaded edge suffered less reduction in load carrying capability because of impact damage than of the same specimens impacted near the unloaded edge. Failure loads of thicker compression loaded specimens with a similar stacking sequence were independent of impact location. Failure loads of thin tension loaded specimens with 0 degree plies was independent of impact location, whereas failure loads of thicker compression loaded specimens with 0 degree plies were dependent upon impact location. A finite element analysis indicated that high axial strains occurred near the unloaded edges of the postbuckled panels. Thus, impacts near the unloaded edge would significantly affect the behavior of the postbuckled panel.

Jegley, Dawn C.↗
NASA NTRS1992

Space environmental effects on LDEF composites: Leading graphite/epoxy panel, selected trailing edge specimens

The composite electronics-module cover for the leading edge (row D9) experiment M0003-8 was fabricated from T300 graphite/934 epoxy unidirectional prepreg tape in a multi-oriented layup. This panel contained thermal control coatings in three of the four quadrants with the fourth quadrant left uncoated as a control. The composite experienced different thermal cycling extremes in each quadrant due to the differing optical properties of the coatings. Results will be presented on microcracking and other Low Earth Orbital (LEO) effects on the coated panel substrate.

Dursch, Harry↗
NASA NTRS1991

Space Network Interoperability Panel (SNIP) study

The Space Network Interoperability Panel (SNIP) study is a tripartite study that involves the National Aeronautics and Space Administration (NASA), the European Space Agency (ESA), and the National Space Development Agency (NASDA) of Japan. SNIP involves an ongoing interoperability study of the Data Relay Satellite (DRS) Systems of the three organizations. The study is broken down into two parts; Phase one deals with S-band (2 GHz) interoperability and Phase two deals with Ka-band (20/30 GHz) interoperability (in addition to S-band). In 1987 the SNIP formed a Working Group to define and study operations concepts and technical subjects to assure compatibility of the international data relay systems. Since that time a number of Panel and Working Group meetings have been held to continue the study. Interoperability is of interest to the three agencies because it offers a number of potential operation and economic benefits. This paper presents the history and status of the SNIP study.

Ryan, Thomas↗
NASA NTRS1992

Space Network Interoperability Panel (SNIP) study

The Space Network Interoperability Panel (SNIP) is described in terms of the panel's composition, purpose, history, and ongoing activities. SNIP is a consortium comprising NASA, ESA, and NASDA that is dedicated to the study of interoperability of the data-relay satellite (DRS) systems of the three groups. S-band and Ka-band interoperability are addressed by the SNIP study program by means of defining operations concepts, technical subjects, and other matters relevant to international DRS system compatibility. The potential users of the interoperability scheme are listed, cross-support techniques are described, and the load situations of the three agencies are characterized. A common 'interoperability frequency framework' is proposed, and both left-and right-hand circular polarization are incorporated to enhance flexibility and minimize interference. An operations concept is outlined based on these and other recommendations as developed by the international SNIP study.

Ryan, Thomas↗
NASA NTRS1992

Scattering effects of solar panel on Space Station Space-To-Ground (SGS) antenna performance

The purpose of this study is to characterize the scattering effects of a solar panel on the Space Station Space-to-Ground Subsystem reflector antenna when the antenna is operated in the RF tracking (difference) mode. This analysis is based on a combination of geometrical theory of diffraction and aperture integration techniques. The advantage of this combination method is its capability in predicting reflector antenna patterns not only in the forward region but also in the far-out sidelobes and backlobes. To verify the analytical model, measurements were performed on the Johnson Space Center far-field antenna test facility. Good agreement between computed and measured results was obtained. It was shown from computation and experiment that the solar panel scattering interference causes a shift in null position, a decrease in the depth of the null, as well as a decrease in the gain on the antenna difference mode patterns.

Hwu, Shian U.↗
NASA NTRS1992

Coupled 2D-3D finite element method for analysis of a skin panel with a discontinuous stiffener

This paper describes a computationally efficient analysis method which was used to predict detailed stress states in a typical composite compression panel with a discontinuous hat stiffener. A global-local approach was used. The global model incorporated both 2D shell and 3D brick elements connected by newly developed transition elements. Most of the panel was modeled with 2D elements, while 3D elements were employed to model the stiffener flange and the adjacent skin. Both linear and geometrically nonlinear analyses were performed on the global model. The effect of geometric nonlinearity induced by the eccentric load path due to the discontinuous hat stiffener was significant. The local model used a fine mesh of 3D brick elements to model the region at the end of the stiffener. Boundary conditions of the local 3D model were obtained by spline interpolation of the nodal displacements from the global analysis. Detailed in-plane and through-the-thickness stresses were calculated in the flange-skin interface near the end of the stiffener.

Wang, J. T.↗
NASA NTRS1992

Paneling methods with vorticity effects and corrections for nonlinear compressibility

Supersonic panel methods and axisymmetric body-modeling singularity methods are presently combined with corrections for nonlinear flow phenomena to a complete missile, its airbreathing inlets, and wing-body combinations. The computer code LRCDM2 is used as an illustrative example of the methods in question. Attention is given to a preliminary method which employs panels to estimate additive drag and lift acting on supersonic rectangular inlets, as well as to the method used to correct off-body flowfields for the presence of a shock. Examples of missile applications of these methods with the appropriate nonlinear corrections are presented.

Dillenius, Marnix F. E.↗
NASA NTRS1993

Crushable Washers For Bolting Composite Panels

Crushable washers proposed for use in protecting composite-material (matrix/fiber) panels against overloads applied by nut-and-bolt fasteners. Intended for use at drilled holes, where strengths of composite panels reduced by exposure of ends of fibers. Washer consists of metal skin filled with microcapsules of epoxy resin and hardener. Alternatively, filled with fibers collapsing under given load. Crushing action simultaneously fractures microcapsules (if used), releasing components of epoxy. These components mix and fill bolthole and fiber-reinforcement interstices. Epoxy then hardens, locking fasteners in place.

Daech, Alfred F.↗
NASA NTRS1991

Payload advisory panel recommendations

The Payload Advisory Panel proposes a restructured Earth Observing System (EOS) mission to address high-priority science and environmental policy issues in Earth System Science. These issues have been identified through studies conducted by the Intergovernmental Panel on Climate Change (IPCC), the United States Environmental Protection Agency (EPA), and the Committee on Earth and Environmental Sciences (CEES). The restructured EOS defers efforts to improve the understanding of the middle and upper stratosphere and solid earth geophysics. The strategy of the mission combines high priority new measurements with continuation of critical data sets begun by missions which precede EOS. Collaborative arrangements with international partners are an essential part of the program and additional arrangements are posed. The need for continuity in Earth observations and the urgency of environmental questions require launch of some EOS elements as soon as possible. They further require maintenance of the EOS objective of obtaining consistent 15-year measurement records.

Moore, Berrien, III↗
NASA NTRS1992

Report on the final panel discussion on computational aeroacoustics

Some important conclusions about future prospects for aeroacoustics in general, and for computational aeroacoustics in particular, that were reached in the course of the Final Panel Discussion of the Workshop on Computational Aeroacoustics held from 6 to 9 April 1992 by ICASE and NASA Langley Research Center are summarized by the panel chairman. Aeroacoustics must now be involved in interactions with computational fluid dynamics (as applied not only to deterministic flows but also to the statistical characteristics of turbulence), while additionally incorporating rigorous comparisons with experiment. The new Computational Aeroacoustics will press forward in two parallel ways. In one of them, CFD will be used to determine aeroacoustic source strengths, the associated radiation being derived by the Acoustic Analogy approach in one of its forms. In the other, a direct Computational Aeroacoustics will apply CFD techniques over a region extending beyond the flow field so as to include at least the beginnings of the acoustic far field. There are some particularly important areas of study, including rotor noise, boundary-layer noise, and the noise of supersonic jets, where it is strongly recommended that use of both methods is continued. On the other hand, important problems of the diffraction of radiation from aeroacoustic sources around complicated aircraft shapes will require the use of comprehensively Computational Aeroacoustics, while Acoustic Analogy methods seem better suited to estimating subsonic jet noise. The study of model problems to allow comparisons with experiment will be valuable in both lines of attack.

Lighthill, James↗
NASA NTRS1991

Improvements to a method for the geometrically nonlinear analysis of compressively loaded stiffened composite panels

This report describes progress made during the period July 1991 to December 1991 on the tasks identified in the technical proposals for the subject grant. The plans for further effort on each of the tasks are outlined. The computer implementation of the method of analysis under development is referred to in this document as NLPAN. These tasks included: (1) implementation of continuation methods; (2) dynamic analysis capability; (3) additional boundary condition options for the panel ends; (4) transverse pressure loading; (5) second-order displacement fields; and (6) results for an i-stiffened panel with a complex cross section.

Source record↗
NASA NTRS1993

Propulsion Systems Panel deliberations

The Propulsion Systems Panel was established because of the specialized nature of many of the materials and structures technology issues related to propulsion systems. This panel was co-chaired by Carmelo Bianca, MSFC, and Bob Miner, LeRC. Because of the diverse range of missions anticipated for the Space Transportation program, three distinct propulsion system types were identified in the workshop planning process: liquid propulsion systems, solid propulsion systems and nuclear electric/nuclear thermal propulsion systems.

Bianca, Carmelo J.↗
NASA NTRS1993

Entry Systems Panel deliberations

The Entry Systems Panel was chaired by Don Rummler, LaRC and Dan Rasky, ARC. As requested, each panel participant prior to the workshop prepared and delivered presentations to: (1) identify technology needs; (2) assess current programs; (3) identify technology gaps; and (4) identify highest payoff areas R&D. Participants presented background on the entry systems R&D efforts and operations experiences for the Space Shuttle Orbiter. These participants represented NASA Centers involved in research (Ames Research Center), development (Johnson Space Center) and operations (Kennedy Space Center) and the Shuttle Orbiter prime contractor. The presentations lead to the discovery of several lessons learned.

Rasky, Daniel J.↗
NASA NTRS1992

Thermo-elastoviscoplastic snapthrough behavior of cylindrical panels

The thermo-elastoviscoplastic snapthrough behavior of simply supported cylindrical panels is investigated. The analysis is based on nonlinear kinematic relations and nonlinear rate-dependent unified constitutive equations which include both Bodner-Partom's and Walker's material models. A finite element approach is employed to predict the inelastic buckling behavior. Numerical examples are given to demonstrate the effects of several parameters which include the temperature, thickness and flatness of the panel. Comparisons of buckling responses between Bodner-Partom's model and Walker's model are given. The creep buckling behavior, as an example of time-dependent inelastic deformation, is also presented.

Song, Y.↗
NASA NTRS1991

Reflectance stability analysis of Spectralon diffuse calibration panels

The Multi-angle Imaging SpectroRadiometer (MISR) plans to use deployable diffuse reflectance panels to provide periodic radiometric calibrations of its nine cameras while in-flight. Near-Lambertian reflectance characteristics are desirable to facilitate flat-field camera intercomparisons. Also required is panel spatial and spectral uniformity, and stability with time. Spectralon, a commercially available polytetrafluoroethylene (PTFE) compound, has been baselined in the MISR design. To assess the suitability of this material, a series of degradation tests were planned and implemented. These included UV vacuum exposure and proton bombardment tests which simulated the exposure levels to be encountered during the mission life. Proton levels are now considered too low to be of concern, but UV vacuum tests demonstrate sensitivity to material contamination. Material investigations have concluded that hydrocarbons are present in the bulk of the material, and that plastic packaging materials can introduce additional surface-layer contamination. It is found however, that these unwanted elements can be eliminated through vacuum pumping at elevated temperatures. Exposure to a UV source, while in vacuum, is again planned for a set of targets which have been vacuum baked. This will assess the stability of the pure PTFE form.

Bruegge, Carol J.↗
NASA NTRS1992

Composite materials for precision space reflector panels

One of the critical technology needs of large precision reflectors for future astrophysical and optical communications satellites lies in the area of structural materials. Results from a materials research and development program at NASA Langley Research Center to provide materials for these reflector applications are discussed. Advanced materials that meet the reflector panel requirements are identified, and thermal, mechanical and durability properties of candidate materials after exposure to simulated space environments are compared. A parabolic, graphite-phenolic honeycomb composite panel having a surface accuracy of 70.8 microinches rms and an areal weight of 1.17 lbm/sq ft was fabricated with T50/ERL1962 facesheets, a PAEI thermoplastic surface film, and Al and SiO(x) coatings.

Tompkins, Stephen S.↗
NASA NTRS1993

Damage progression in stiffened composite panels

The design of composite structures requires an evaluation of their safety and durability under service loads and possible overload conditions. This paper presents a computational tool that has been developed to examine the response of stiffened composite panels via the simulation of damage initiation, growth, accumulation, progression, and propagation to structural fracture or co*lapse. The structural durability of a composite panel with a discontinuous stiffener is investigated under compressive loading induced by the gradual displacement of an end support. Results indicate damage initiation and progression to have significant effects on structural behavior under loading. Utilization of an integrated computer code for structural durability assessment is demonstrated.

Minnetyan, Levon↗
NASA NTRS1993

Design of a blade stiffened composite panel by a genetic algorithm

Genetic algorithms (GAs) readily handle discrete problems, and can be made to generate many optima, as is presently illustrated for the case of design for minimum-weight stiffened panels with buckling constraints. The GA discrete design procedure proved superior to extant alternatives for both stiffened panels with cutouts and without cutouts. High computational costs are, however, associated with this discrete design approach at the current level of its development.

Nagendra, S.↗