Search NASA⌕ Search

SEARCH · Search NASA

Results for “SCATTERING FUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Investigation on phonon scattering in a GaAs nanowire field effect transistor using the non-equilibrium Green's function formalism

Using quantum transport simulations, the impact of electron-phonon scattering on the transfer characteristic of a gate-all-around nanowire (GaAs) field effect transistor (NWFET) has been thoroughly investigated. The Non-Equilibrium Green's Function formalism in the effective mass approximation using a decoupled mode decomposition has been deployed. NWFETs of different dimensions have been considered, and scattering mechanisms including acoustic, optical and polar optical phonons have been included. The effective masses were extracted from tight binding simulations. High and low drain bias have been considered. We found substantial source to drain tunnelling current and significant impact of phonon scattering on the performance of the NWFET. At low drain bias, for a 2.2 × 2.2 nm{sup 2} cross-section transistor, scattering caused a 72%, 77%, and 81% decrease in the on-current for a 6 nm, 10 nm, and 20 nm channel length, respectively. This reduction in the current due to scattering is influenced by the increase in the tunnelling current. We include the percentage tunnelling for each valley at low and high drain bias. It was also found that the strong quantisation caused the relative position of the valleys to vary with the cross-section. This had a large effect on the overall tunnelling current. The phonon-limited mobility was also calculated, finding a mobility of 950 cm{sup 2}/V s at an inversion charge density of 10{sup 12 }cm{sup −2} for a 4.2 × 4.2 nm{sup 2} cross-section device.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An analysis of scatter decomposition

A formal analysis of a mapping method known as scatter decomposition (SD) is presented. SD divides an irregular domain into many equal-size pieces and distributes them modularly among processors. It is shown that, if a correlation in workload is a convex function of distance, then scattering a more finely decomposed domain yields a lower average processor workload variance; if the workload process is stationary Gaussian and the correlation function decreases linearly in distance to zero and then remains zero, scattering a more finely decomposed domain yields a lower expected maximum processor workload. Finally, if the correlation function decreases linearly across the entire domain, then (among all mappings that assign an equal number of domain pieces to each processor) SD minimizes the average processor workload variance. The dependence of these results on the assumption of decreasing correlation is illustrated with cases where a coarser granularity actually achieves better load balance.

Nicol, David M.↗

Silver nanoparticles on nanopatterned LiF(110) surface studied by extreme ultraviolet light scattering

A LiF(110) surface featuring a ridge-and-valley nanopatterned structure periodic along the [−1,1,0] direction (period and height of the order of 30 nm and 10 nm, respectively) formed by [001] macrosteps exposing (100) and (010) facets was functionalized by rows of Ag nanoparticles and studied by elastic light scattering in the energy range 50–100 eV. Families of diffraction efficiencies curves were taken at grazing incidence angle and fixed photon energy as a function of scattering angle, and elastic scattering curves were taken at fixed scattering angle as a function of energy. The scattering curves presented well-defined features ascribable to the periodicities of the surface, or equivalently to the reciprocal q{sub X} vectors correlated with the power spectral density features of topological images of atomic force microscopy. Other characteristics of the functionalized surface, including the height of ridge-valley profile, the Ag nanoparticle dimensions, and the material distribution in the scattering plane, were obtained by fitting the experimental zero and first order efficiency curves to simulation results of a parameterized model. The simulations were carried out adapting an in-house code based on the electromagnetic differential method, and the different material properties were taken into account by a space dependent complex dielectric constant. Information along the direction perpendicular to the scattering plane was not accessible but morphological insights were obtained combining light diffraction with atomic force microscopy. The results indicate nanoparticles with a quasi-ellipsoidal shape prolate along the ridge direction with minor and major axes of ∼12 nm and ∼21 nm, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Use of radial symmetry for the calculation of cylindrical absorption coefficients and optimal capillary loadings

The problem of numerically evaluating absorption correction factors for cylindrical samples has been revisited using a treatment that fully takes advantage of the sample symmetry. It is shown that the path lengths for all points within the sample at all possible diffraction angles can be trivially determined once the angle-dependent distance distribution for a single line of points is calculated. This provides advantages in both computational efficiency and in gaining an intuitive understanding of the effects of absorption on diffraction data. A matrix of absorption coefficients calculated for µR products between 0 and 20 for diffraction angles θ D of 0° to 90° were used to examine the influence of (1) capillary diameter and of (2) sample density on the overall scattered intensity as a function of diffraction angle, where µ is the linear absorption coefficient for the sample and R is the capillary radius. Based on this analysis, the optimal sample loading for a capillary experiment to maximize diffraction at angles of 0 – 50° is in general expected to be achieved when the maximum radius capillary compatible with the beam is used, and when the sample density is adjusted to be 3/(4µR) of its original density.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of charge transfer excitations in hexacyanomanganate(III) with Mn K-edge resonant inelastic x-ray scattering

We use hard x-ray resonant inelastic x-ray scattering (RIXS) and density functional theory (DFT) calculations to characterize charge transfer excitations in K{sub 3}Mn(CN){sub 6}. The combination of RIXS measurements and DFT calculations allows us to characterize the strength of the ligand-metal electronic interaction and assign the Raman resonances in the RIXS spectra to charge transfer excitations. With x-ray excitation energies resonant with the T{sub 2g} and E{sub g} pre-edge peaks derived predominantly from the Mn 3d orbitals, we observe Raman resonances in the energy transfer range from 2 to 12 eV, which results from the filling of the 1s core-hole from T{sub 1u}-symmetry occupied orbitals. DFT calculations indicate that these orbitals exhibit primarily ligand character, supporting the assignment of the energy transfer resonances to ligand-to-metal charge transfer excitations. Our RIXS measurements and DFT calculations also indicate that the E{sub g}-orbital spin-splits by roughly 0.8 eV, though we do not cleanly resolve the two absorption peaks in the RIXS spectra. We also see evidence for a metal-to-ligand charge transfer (MLCT) excitation when exciting with a 6545.0 eV incident photon, roughly 4 eV above the E{sub g} absorption peaks. The 6545.0 eV resonant emission spectrum shows a 6.0 eV energy transfer resonance, which corresponds to a final state hole in the T{sub 2g} partially occupied orbital. DFT calculations indicate that excitation at 6545.0 eV populates an unoccupied T{sub 1u}-symmetry orbital of primarily ligand character. Given the predominantly metal character of the final state hole, we assign the 6.0 eV Raman resonance to a MLCT excitation. These measurements demonstrate the ability of hard x-ray RIXS to characterize the valence electronic structure of coordination compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Contribution of twist-3 multigluon correlation functions to single spin asymmetry in semi-inclusive deep inelastic scattering

As a possible source of the single transverse-spin asymmetry, we study the contribution from purely gluonic correlation represented by the twist-3 ''three-gluon correlation'' functions in the transversely polarized nucleon. We first define a complete set of the relevant three-gluon correlation functions, and then derive its contribution to the twist-3 single-spin-dependent cross section for the D-meson production in semi-inclusive deep inelastic scattering, which is relevant to determine the three-gluon correlations. Our cross-section formula differs from the corresponding result in the literature, and the origin of the discrepancy is clarified.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Limitations to the room temperature mobility of two- and three-dimensional electron liquids in SrTiO{sub 3}

We analyze and compare the temperature dependence of the electron mobility of two- and three-dimensional electron liquids in SrTiO{sub 3}. The contributions of electron-electron scattering must be taken into account to accurately describe the mobility in both cases. For uniformly doped, three-dimensional electron liquids, the room temperature mobility crosses over from longitudinal optical (LO) phonon-scattering-limited to electron-electron-scattering-limited as a function of carrier density. In high-density, two-dimensional electron liquids, LO phonon scattering is completely screened and the mobility is dominated by electron-electron scattering up to room temperature. The possible origins of the observed behavior and the consequences for approaches to improve the mobility are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coherence Measurements for Excited to Excited State Transitions in Barium

Experimental studies concerning elastic and inelastic electron scattering by coherently ensembles of Ba (...6s6p (sub 1)P(sub 1)) atoms with various degrees of alignment will be described. An in-plane, linearly-polarized laser beam was utilized to prepare these target ensembles and the electron scattering signal as a function of polarization angle was measured for several laser geometries at fixed impact energies and scattering angles. From these measurements, we derived cross sections and electron-impact coherence parameters associated with the electron scattering process which is time reverse of the actual experimentally studied process. This interpretation of the experiment is based on the theory of Macek and Herte. The experimental results were also interpreted in terms of cross sections and collision parameters associated with the actual experimental processes. Results obtained so far will be presented and plans for further studies will be discussed.

Trajmar, S.↗

Metal–Carbodithioate-Based 3D Semiconducting Metal–Organic Framework: Porous Optoelectronic Material for Energy Conversion

Solar energy conversion requires the working compositions to generate photoinduced charges with high potential and the ability to deliver charges to the catalytic sites and/or external electrode. These two properties are typically at odds with each other and call for new molecular materials with sufficient conjugation to improve charge conductivity but not as much conjugation as to overly compromise the optical band gap. In this work, we developed a semiconducting metal-organic framework (MOF) prepared explicitly through metal-carbodithioate"(-CS 2 ) n M" linkage chemistry, entailing augmented metal-linker electronic communication. The stronger ligand field and higher covalent character of metal-carbodithioate linkages-when combined with spirofluorene-derived organic struts and nickel-(II) ion-based nodes-provided a stable, semiconducting 3D-porous MOF, Spiro-CS 2 Ni. This MOF lacks long-range ordering and is defined by a flexible structure with non-aggregated building units, as suggested by reverse Monte Carlo simulations of the pair distribution function obtained from total scattering experiments. The solvent-removed "closed pore"material recorded a Brunauer-Emmett-Teller area of similar to 400m 2 /g, where the "open pore" form possesses90 wt % solvent-accessible porosity. Electrochemical measurements suggest that Spiro-CS 2 Ni possesses a band gap of 1.57 eV(sigma = 10 -7 S/cm at -1.3 V bias potential),which can be further improved by manipulating the d-electron configuration through an axial coordination (ligand/substrate), the latter of which indicates usefulness as an electrocatalyst and/or a photoelectrocatalyst(upon substrate binding). Transient-absorption spectroscopy reveals a long-lived photo-generated charge-transfer state (τ CR = 6.5 mu s) capable of chemical transformation under a biased voltage. Spiro-CS 2 Ni can endure a compelling range of pH(1-12 for weeks) and hours of electrochemical and photoelectrochemical conditions in the presence of water and organic acids. We believe this work provides crucial design principles for low-density, porous,light-energy-conversion materials.

36 MATERIALS SCIENCE↗

Scaling laws in high-energy inverse Compton scattering

Based upon the rate equations for the photon distribution function obtained in the previous paper, we study the inverse Compton scattering process for high-energy nonthermal electrons. Assuming the power-law electron distribution, we find a scaling law in the probability distribution function P{sub 1}(s), where the peak height and peak position depend only on the power-index parameter. We solved the rate equation analytically. It is found that the spectral intensity function also has the scaling law, where the peak height and peak position depend only on the power-index parameter. The present study will be particularly important to the analysis of the X-ray and gamma-ray emission models from various astrophysical objects such as radio galaxies and supernova remnants.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Extrapolation of scattering data to the negative-energy region. II. Applicability of effective range functions within an exactly solvable model

A problem of analytical continuation of scattering data to the negative-energy region to obtain information about bound states is discussed within an exactly solvable potential model. This work is continuation of the previous one by the same authors [L. D. Blokhintsev et al., Phys. Rev. C 95, 044618 (2017)]. The goal of this paper is to determine the most effective way of analytic continuation for different systems. The d + α and α + 12 C systems are considered and, for comparison, an effective-range function approach and a recently suggested Δ method [O. L. Ramírez Suárez and J.-M. Sparenberg, Phys. Rev. C 96, 034601 (2017).] are applied. We conclude that the method is more effective for heavier systems with large values of the Coulomb parameter, whereas for light systems with small values of the Coulomb parameter the effective-range function method might be preferable.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Investigating the Effect of Added Salt on the Chain Dimensions of Poly(ethylene oxide) through Small-Angle Neutron Scattering

We have measured the effect of added salt on the chain dimensions of mixtures of poly(ethylene oxide) (PEO) and lithium bis(trifluoromethanesulfonyl)imide salt (LiTFSI) in the melt state through small-angle neutron scattering (SANS) experiments. Scattering profiles from blends of hydrogenated and deuterated PEO mixed with LiTFSI were measured as a function of salt concentration. Scattering profiles from pure deuterated PEO/LiTFSI mixtures were used for background-subtraction purposes. The densities of PEO/LiTFSI mixtures of varying salt concentrations were measured to calculate partial molar monomer volumes of PEO and LiTFSI to account for nonideal mixing. Kratky plots of the scattering profiles were used to calculate the salt concentration dependence of statistical segment length. At low salt concentrations, segment length decreases with increasing salt concentration, before increasing with increasing salt concentration in the high salt concentration regime. The random phase approximation was used to predict theoretical scattering profiles from the calculated segment lengths and partial molar volumes; there is excellent agreement between the theoretical and measured scattering profiles at all salt concentrations. There appears to be a correlation between chain dimensions and coordination between lithium ions and EO monomers. Finally, the scattering profiles of the pure deuterated PEO/LiTFSI mixtures suggested the presence of ion clusters of characteristic size of 0.6 nm at high salt concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two-dimensional overdamped fluctuations of the soft perovskite lattice in CsPbBr 3

Lead halide perovskites exhibit structural instabilities and large atomic fluctuations thought to impact their optical and thermal properties, yet detailed structural and temporal correlations of their atomic motions remain poorly understood. Here, these correlations are resolved in CsPbBr 3 crystals using momentum-resolved neutron and X-ray scattering measurements as a function of temperature, complemented with first-principles simulations. We uncover a striking network of diffuse scattering rods, arising from the liquid-like damping of low-energy Br-dominated phonons, reproduced in our simulations of the anharmonic phonon self-energy. Here, these overdamped modes cover a continuum of wave vectors along the edges of the cubic Brillouin zone, corresponding to two-dimensional sheets of correlated rotations in real space, and could represent precursors to proposed two-dimensional polarons. Further, these motions directly impact the electronic gap edge states, linking soft anharmonic lattice dynamics and optoelectronic properties. These results provide insights into the highly unusual atomic dynamics of halide perovskites, relevant to further optimization of their optical and thermal properties.

36 MATERIALS SCIENCE↗

Influence of magnetism on Dirac semimetallic behavior in nonstoichiometric Sr 1 - y Mn 1 - z Sb 2 ( y ~ 0.07 , z ~ 0.02 )

Nonstoichiometric Sr 1-y Mn 1-z Sb 2 (y,z < 0.1) is known to exhibit a coexistence of magnetic order and the nontrivial semimetallic behavior. Here, we report the magnetism and its strong coupling to the semimetallic behavior, by a combined use of inelastic neutron scattering (INS) and density functional theory (DFT). A phase separation consisting of a majority antiferromagentic phase and a minority ferromagnetic phase is proposed. We found a relatively large spin excitation gap ≈ 8.5meV at 5 K, and the interlayer magnetic exchange constant only 2.8% of the dominant intralayer magnetic interaction, evidencing a quasi-2D magnetism in Sr 1-y Mn 1-z Sb 2 . Using DFT, we find a strong influence of magnetic orders on the electronic band structure and the Dirac dispersions near the Fermi level along the Y-S direction in the presence of a ferromagnetic order. Furthermore, we demonstrate that the size of the ferromagnetic ordered moment is an effective strategy to tune Dirac/Weyl dispersions near the Fermi level. Lastly, our study unveils novel interplay between the magnetic order, ordered moment, and electronic band topology in Sr 1-y Mn 1-z Sb 2 and opens pathways to control the relativistic band structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗