Search NASA⌕ Search

SEARCH · Search NASA

Results for “SPACE STATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Analog FM/FM versus digital color TV transmission aboard space station

Langley Research Center is developing an integrated fault tolerant network to support data, voice, and video communications aboard Space Station. The question of transmitting the video data via dedicated analog channels or converting it to the digital domain for consistancy with the test of the data is addressed. The recommendations in this paper are based on a comparison in the signal-to-noise ratio (SNR), the type of video processing required aboard Space Station, the applicability to Space Station, and how they integrate into the network.

Hart, M. M.↗

Adaption of Space Station technology for lunar operations

The possible use of Space Station technology in a lunar base program is discussed, focusing on the lunar lander/ascent vehicles and surface modules. The application of the Space Station data management system, software, and communications, tracking, guidance, navigation, control, and power technologies is examined. The benefits of utilizing this technology for lunar operations are considered.

Garvey, J. M.↗

A study of knowledge-based systems for the Space Station

A rapid turnaround study on the potential uses of knowledge-based systems for Space Station Freedom was conducted from October 1987 through January 1988. Participants included both NASA personnel and experienced industrial knowledge engineers. Major results of the study included five recommended systems for the Baseline Configuration of the Space Station, an analysis of sensor hooks and scars, and a proposed plan for evolutionary growth of knowledge-based systems on the Space Station.

Friedland, Peter↗

Evolutionary Space Station Guidance Navigation and Control (GN/C) study

The guidance, navigation, and control (GN&C) techniques and equipment to support evolutionary space station concepts were analyzed. Simulations of the evolutionary space station configurations and operational concepts were conducted to analyze the attitude control, reboost, and traffic management accommodation requirements. A summary of the mission concepts, space station configurations, simulation results, and the impact on the baseline GN&C systems are presented.

Kennedy, Jerry↗

Space Station Simulation Computer System (SCS) study for NASA/MSFC. Volume 1: Baseline architecture report

NASA's Space Station Freedom Program (SSFP) planning efforts have identified a need for a payload training simulator system to serve as both a training facility and as a demonstrator to validate operational concepts. The envisioned MSFC Payload Training Complex (PTC) required to meet this need will train the Space Station payload scientists, station scientists, and ground controllers to operate the wide variety of experiments that will be onboard the Space Station Freedom. The Simulation Computer System (SCS) is made up of the computer hardware, software, and workstations that will support the Payload Training Complex at MSFC. The purpose of this SCS Study is to investigate issues related to the SCS, alternative requirements, simulator approaches, and state-of-the-art technologies to develop candidate concepts and designs.

Source record↗

Space Station Simulation Computer System (SCS) study for NASA/MSFC. Volume 2: Baseline architecture report

NASA's Space Station Freedom Program (SSFP) planning efforts have identified a need for a payload training simulator system to serve as both a training facility and as a demonstrator to validate operational concepts. The envisioned MSFC Payload Training Complex (PTC) required to meet this need will train the Space Station payload scientists, station scientists, and ground controllers to operate the wide variety of experiments that will be onboard the Space Station Freedom. The Simulation Computer System (SCS) is the computer hardware, software, and workstations that will support the Payload Training Complex at MSFC. The purpose of this SCS Study is to investigate issues related to the SCS, alternative requirements, simulator approaches, and state-of-the-art technologies to develop candidate concepts and designs.

Source record↗

Space Station crew workload - Station operations and customer accommodations

The features of the Space Station which permit crew members to utilize work time for payload operations are discussed. The user orientation, modular design, nonstressful flight regime, in space construction, on board control, automation and robotics, and maintenance and servicing of the Space Station are examined. The proposed crew size, skills, and functions as station operator and mission specialists are described. Mission objectives and crew functions, which include performing material processing, life science and astronomy experiments, satellite and payload equipment servicing, systems monitoring and control, maintenance and repair, Orbital Maneuvering Vehicle and Mobile Remote Manipulator System operations, on board planning, housekeeping, and health maintenance and recreation, are studied.

Shinkle, G. L.↗

A global analysis of the electrodynamic interactions between a space station and the ionospheric plasma environment

A general analysis of the electrodynamic interactions between a space station with two biased platforms and the ionospheric plasma is presented. This problem can be separated into a far-field problem, concerned with the electromagnetic interference surrounding the entire space station, and a near-field problem, concentrated on the interactions in the vicinity of the biased platforms. The far-field problem is solved by application of plasma fluid theory. The space station will generate a radiation field composed mainly of the Alfven waves. This far-field radiation depends on the details of the near-field current collection. Computer particle simulations were performed in the near-field of the biased platform to study the plasma flow field, the sheath structure and the current collection. Approximate analytical solutions to the near-field are also obtained. The far-field and near-field solutions are coupled to provide a global description of the electrodynamic interactions.

Wang, J.↗

Space station automation study-satellite servicing. Volume 1: Executive summary

A plan for advancing the state of automation and robotics technology as an integral part of the U.S. space station development effort was studied. This study was undertaken: (1) to determine the benefits that will accrue from using automated systems onboard the space station in support of satellite servicing; (2) to define methods for increasing the capacity for, and effectiveness of satellite servicing while reducing demands on crew time and effort and on ground support; (3) to find optimum combinations of men/machine activities in the performance of servicing functions; and (4) project the evolution of automation technology needed to enhance or enable satellite servicing capabilities to match the evolutionary growth of the space station. A secondary intent is to accelerate growth and utilization of robotics in terrestrial applications as a spin-off from the space station program.

Source record↗

Space station executive summary

An executive summary of the modular space station study is presented. The subjects discussed are: (1) design characteristics, (2) experiment program, (3) operations, (4) program description, and (5) research implications. The modular space station is considered a candidate payload for the low cost shuttle transportation system.

Source record↗

Space Station Parametric Models

The development of two parametric models for a four-panel planar initial space station is described. The derivations of the distributed parameter model are presented in detail with the hope that the same method and procedures can be employed for stations with different configurations or for changes within the same configuration class. The 19-DOF finite-element model is also described. With the availability of the 19-DOF and a lower-DOF space station models, the frequency characteristics of the various dynamical systems in the space station environment are identified.

Hamidi, M.↗

Space Station trash removal system

A trash removal system for space stations is described. The system is comprised of a disposable trash bag member and an attached, compacted large, lightweight inflatable balloon element. When the trash bag member is filled, the astronaut places the bag member into space through an airlock. Once in the vacuum of space, the balloon element inflates. Due to the large cross-sectional area of the balloon element relative to its mass, the combined balloon element and the trash bag member are slowed by atmospheric drag to a much greater extent than the Space Station's. The balloon element and bag member lose altitude and re-enter the atmosphere, and the elements and contents are destroyed by aerodynamic heating. The novelty of this system is in the unique method of using the vacuum of space and aerodynamic heating to dispose of waste material with a minimum of increase in orbital debris.

Petro, Andrew J.↗

Thermal Control System of the ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS)

The ECOSystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) is a thermal infrared imaging multispectral scanner science mission. ECOSTRESS is designed and built by the NASA Jet Propulsion Laboratory and will be deployed on the International Space Station (ISS). ECOSTRESS will measure the water loss from growing leaves and the evaporation from the soil by measuring the temperature of plants and will gather data on the health of the agriculture system on Earth. The ISS orbit will allow ECOSTRESS to take observations at different times during each day over the seasons to provide coverage over the contiguous United States. The ECOSTRESS Thermal Control System (TCS) consists of a combination of active and passive components to maintain the ECOSTRESS components within the allowable flight temperature (AFT) limits. The active thermal control systems include mechanical cryocoolers, heaters and a single-phase pumped fluid loop for Instrument and Payload. The focal plane detector is cooled to 65K by a pair of mechanical cryocoolers and a third mechanical cryocooler cools an intermediate cold shield to 130K. The pumped fluid loop transfers the instrument waste heat to JAXA’s Japanese Exposed Module External Facility (JEM-EF) provided external fluid loop before rejection to space from the ISS radiators. The passive TCS includes multi-layer and single layer insulations, flexible thermal links and coatings on the radiometer. This paper describes the ECOSTRESS instrument TCS architecture, instrument thermal requirements and key design drivers, the top level thermal design and analysis approach, and reports preliminary test results.

Carroll, Brian↗

Space station operations task force summary report

A companion to the Space Stations Operation Task Force Panels' Reports, this document summarizes all space station program goals, operations, and the characteristics of the expected user community. Strategies for operation and recommendations for implementation are included.

Source record↗

Space station neutral external environment

Molecular contamination levels arising from the external induced neutral environment of the Space Station (Phase 1 configuration) were calculated using the MOLFLUX model. Predicted molecular column densities and deposition rates generally meet the Space Station contamination requirements. In the doubtful cases of deposition due to materials outgassing, proper material selection, generally excluding organic products exposed to the external environment, must be considered to meet contamination requirements. It is important that the Space Station configuration, once defined, is not significantly modified to avoid introducing new unacceptable contamination sources.

Ehlers, H.↗

Space Station multiple access communications system

The development of a multiple access communications system (MACS) for the space-to-space communications on the Space Station is discussed. The communications capabilities of the FHMA, CDMA, TDMA, SDMA, and FDMA techniques are evaluated; FDMA was selected for the space-to-space communications on the Space Station because of its lower complexity and growth capability. The proposed space-to-space multiple access system for the Space Station is a digitally modulated Ku-band FDMA system with a distributed architecture; this system would transmit on frequencies between 13.4 and 13.7 GHz and receive on frequencies between 14.6 and 14.89 GHz, and the bandwidth will support seven high-data-rate users and 12 low-data-rate users. The IF components and antennas for the MACS are examined. A multiple access breadboard design is described.

Olson, Nanci A.↗

Disturbance and vibration isolation in space stations by means of mechanical decoupling

A decoupling approach to disturbance and vibration isolation in large space stations composed of modules interconnected by flexible members is proposed. A simplified mathematical model for the motion of the space station core and a laboratory module with both torsional vibration and translational motion decouplers is used in this study. The dynamic behavior of the model in the presence of decoupler friction is analyzed. Estimates for the maximum excursions of the laboratory module induced by various types of external disturbance are derived. The paper concludes with a simulation study involving the hard-docking of a space shuttle with a space station.

Wang, P. K. C.↗

Integrated dynamic analysis simulation of space stations with controllable solar arrays (supplemental data and analyses)

Space station and solar array data and the analyses which were performed in support of the integrated dynamic analysis study. The analysis methods and the formulated digital simulation were developed. Control systems for space station altitude control and solar array orientation control include generic type control systems. These systems have been digitally coded and included in the simulation.

Heinrichs, J. A.↗