Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sensitive data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

LANDSAT data preprocessing

The effect on LANDSAT data of a Sun angle correction, an intersatellite LANDSAT-2 and LANDSAT-3 data range adjustment, and the atmospheric correction algorithm was evaluated. Fourteen 1978 crop year LACIE sites were used as the site data set. The preprocessing techniques were applied to multispectral scanner channel data and transformed data were plotted and used to analyze the effectiveness of the preprocessing techniques. Ratio transformations effectively reduce the need for preprocessing techniques to be applied directly to the data. Subtractive transformations are more sensitive to Sun angle and atmospheric corrections than ratios. Preprocessing techniques, other than those applied at the Goddard Space Flight Center, should only be applied as an option of the user. While performed on LANDSAT data the study results are also applicable to meteorological satellite data.

Austin, W. W.↗
DOE OSTI2022

Updates and Validation for the n+ 63,65 Cu Cross Sections [Abstract]

The neutron induced total, elastic, and capture cross sections of 63,65 Cu isotopes were selected for evaluation in the resolved and unresolved resonance energy ranges by the National Criticality Safety Program to resolve discrepancies related to benchmark performance. This is especially evident for the series of ZEUS benchmarks in which copper is used as a reflector. Because copper is also used as structural material in both fission and fusion reactors, the need to address benchmark discrepancies linked to nuclear data deficiencies is a task of primary importance. The aim of this work is to describe the steps of evaluation work towards a consistent improvement of the benchmark performance. The R-matrix analysis with the SAMMY code focused on the 63 Cu(n,γ) reaction channel between 100-300 keV coupled to unresolved resonance region parameters up to 650 keV to fit average cross section data from a recent experiment. Due to the high sensitivity of many benchmarks to elastic scattering angular distribution data, especially for the 65 Cu isotope, the impact of these data was tested by generating Legendre coefficients from both resonance parameters and the Hauser-Feshbach model. Guided by the findings of Shaw et al., the performance of the current evaluation for 65 Cu was compared to that of ENDF/B-VII.1 and ENDF/B-VIII.0 by testing the reactivity coefficients corresponding to the validation suite of experimental criticality benchmarks for thermal, intermediate, and fast systems taken from the International Criticality Safety Benchmark Experiments Project Handbook. The benchmark performance is especially sensitive to 63 Cu(n,γ) and 65 Cu elastic scattering for neutron energies in the 100–500 keV region, whereas 100 keV is the upper limit of the resolved resonance region in the ENDF/B-VIII.0 evaluations for 63,65 Cu. The results highlight the need to handle the transition from the resolved resonance region to the high energy region carefully.

07 ISOTOPE AND RADIATION SOURCES↗
NASA NTRS1981

On the sensitivity of numerical weather prediction to remotely sensed marine surface wind data - A simulation study

The reported investigation has the objective to assess the potential impact on numerical weather prediction (NWP) of remotely sensed surface wind data. Other investigations conducted with similar objectives have not been satisfactory in connection with a use of procedures providing an unrealistic distribution of initial errors. In the current study, care has been taken to duplicate the actual distribution of information in the conventional observing system, thus shifting the emphasis from accuracy of the data to the data coverage. It is pointed out that this is an important consideration in assessing satellite observing systems since experience with sounder data has shown that improvements in forecasts due to satellite-derived information is due less to a general error reduction than to the ability to fill data-sparse regions. The reported study concentrates on the evaluation of the observing system simulation experimental design and on the assessment of the potential of remotely sensed marine surface wind data.

Cane, M. A.↗
NASA NTRS1989

Sensitivity of mesoscale-model forecast skill to some initial-data characteristics, data density, data position, analysis procedure and measurement error

The effects of horizontal and vertical data resolution, data density, data location, different objective analysis algorithms, and measurement error on mesoscale-forecast accuracy are studied with observing-system simulation experiments. Domain-averaged errors are shown to generally decrease with time. It is found that the vertical distribution of error growth depends on the initial vertical distribution of the error itself. Larger gravity-inertia wave noise is produced in forecasts with coarser vertical data resolution. The use of a low vertical resolution observing system with three data levels leads to more forecast errors than moderate and high vertical resolution observing systems with 8 and 14 data levels. Also, with poor vertical resolution in soundings, the initial and forecast errors are not affected by the horizontal data resolution.

Warner, Thomas T.↗
NASA NTRS1985

Role of hydroxide impurities in the thermoluminescent behavior of lithium fluoride

The influence of OH ion impurities on thermoluminescent sensitivity and supralinearity in LiF:Mg, Ti is analyzed. Available evidence is shown to be consistant with the presence of Ti-OH and Mg-OH complexes. The track interaction model is used to explain the data, with competing centers decreasing sensitivity and supralinearity at high concentrations.

Stoebe, T. G.↗
NASA NTRS2009

Acceleration Environment of the International Space Station

Measurement of the microgravity acceleration environment on the International Space Station has been accomplished by two accelerometer systems since 2001. The Microgravity Acceleration Measurement System records the quasi-steady microgravity environment, including the influences of aerodynamic drag, vehicle rotation, and venting effects. Measurement of the vibratory/transient regime, comprised of vehicle, crew, and equipment disturbances, has been accomplished by the Space Acceleration Measurement System-II. Until the arrival of the Columbus Orbital Facility and the Japanese Experiment Module, the location of these sensors, and therefore, the measurement of the microgravity acceleration environment, has been limited to within the United States Laboratory. Japanese Aerospace Exploration Agency has developed a vibratory acceleration measurement system called the Microgravity Measurement Apparatus which will be deployed within the Japanese Experiment Module to make distributed measurements of the Japanese Experiment Module's vibratory acceleration environment. Two Space Acceleration Measurement System sensors from the United States Laboratory will be re-deployed to support vibratory acceleration data measurement within the Columbus Orbital Facility. The additional measurement opportunities resulting from the arrival of these new laboratories allows Principal Investigators with facilities located in these International Space Station research laboratories to obtain microgravity acceleration data in support of their sensitive experiments. The Principal Investigator Microgravity Services project, at NASA Glenn Research Center, in Cleveland, Ohio, has supported acceleration measurement systems and the microgravity scientific community through the processing, characterization, distribution, and archival of the microgravity acceleration data obtained from the International Space Station acceleration measurement systems. This paper summarizes the PIMS capabilities available to the International Space Station scientific community, introduces plans for extending microgravity analysis results to the newly arrived scientific laboratories, and provides summary information for known microgravity environment disturbers.

McPherson, Kevin↗
DOE OSTI2018

Diagnostic Models for Wind Turbine Gearbox Components Using SCADA Time Series Data: Preprint

This paper presents a scalable, autonomous framework for diagnostics of wind turbine gearbox failures using a multi-feature supervisory control and data acquisition data set spanning multiple years. Because of the size of the data set studied, all algorithms were constructed to be scalable using a Spark-Hadoop data framework. An unsupervised approach was used to detect significant failures based on predetermined criteria. The initial criteria selected were an abnormal spike in turbine component temperature followed by a turbine power off, which helps reduce the number of potential false alarms. To detect abnormal spikes in component temperature, a model was introduced to adjust the temperature data for effects caused by ambient temperature and normal temperature increases when loaded. This study evaluates methods for normalizing temperature sensor data to identify anomalies. The models that performed the best were a linear regression and a multivariate polynomial regression. The proposed process for finding failures has tunable parameters that can be adjusted to be more or less sensitive. The combination of sensor data normalization and application of these criteria is successful in finding turbine failures resulting in downtime. The proposed methods can operate without failure or maintenance logs and can be utilized for offline analysis of large high-resolution data sets.

17 WIND ENERGY↗
DOE OSTI2023

The effect of chemical functional groups on the octane sensitivity of fuel blends for spark-ignited and multimode engines

We report the octane sensitivity of fuel blends containing blendstocks of diverse chemical functionalities blended in concentrations up to 20% by volume into BOBs (Blendstocks for Oxygenate Blending). This study focuses on the blendstocks containing functional groups which lack reliable octane number data. The effects on octane sensitivity of blends of cyclopropanes, alkyl carbonates, oxiranes, alcohols, ketones, esters, nitrogen-containing compounds, cyclic and olefinic hydrocarbons, multifunctional materials containing combinations of these functionalities, and the co-blends of the blendstocks with ethanol in a BOB have been evaluated. Octane sensitivity of the blends containing functional groups that haven’t been evaluated before are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Joint inversion of gravity and cosmic ray muon flux at a well-characterised site for shallow subsurface density prediction

Estimating subsurface density is important for imaging various geologic structures such as volcanic edifices, reservoirs, and aquifers. Muon tomography has recently been used to complement traditional gravity measurements as a powerful method for probing shallow subsurface density structure beneath volcanoes. Gravity and muon data have markedly different spatial sensitivities and, as a result, the combination is useful for imaging structures on spatial scales that are larger than the area encompassed by crossing muon trajectories. Here we explore and test a joint inversion of gravity and muon data in a study area where there is an independently-characterised target anomaly: a regionally extensive, high-density layer beneath Los Alamos, New Mexico, USA. We resolve the nearly flat-lying structure using a unique experimental set-up wherein surface and subsurface gravity and muon measurements are obtained above and below the target volume. Our results show that with minimal geologic (prior) constraints, the joint inversion correctly recovers salient features of the expected density structure. The results of our study illustrate the potential of combining surface and subsurface (e.g., borehole) gravity and muon measurements to invert for shallow geologic structures.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Ring laser gyroscopes in the underground Gran Sasso Laboratories

Gyroscopes IN GEneral Relativity (GINGER) is a proposed experiment with the aim of measuring the gravito-electric (known also as De Sitter effect) and gravito-magnetic effects (or Lense – Thirrings effect) in a ground laboratory, foreseen by general relativity, through an array of large dimension ring laser gyroscopes. The site is located inside the Gran Sasso laboratories (LNGS) of INFN, under more than one thousand meter underground, well protected from surface perturbations. GINGERINO is a square ring-laser prototype with 3.6 m side, which has been built to investigate the level of noise of this site. GINGERINO has already completed its task, showing the advantage of the underground location. It cannot reach the sensitivity suitable for the fundamental physics measurements, but it can provide important data for geophysics and seismology. Its high sensitivity in the frequency band of fraction of Hz and its location in a seismically active area make it suitable for seismology studies. It recorded a sequence of central Italy earthquakes in the autumn of 2016 and many other events both from near field and from far field. The analysis of 90 days of continuous operation shows that its duty cycle is higher than 95 %, with a quantum shot noise limit of the order of 10{sup −10} rad s{sup −1} Hz{sup −1/2}. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1975

Statistical theory and methodology for remote sensing data analysis with special emphasis on LACIE

Crop proportion estimators for determining crop acreage through the use of remote sensing were evaluated. Several studies of these estimators were conducted, including an empirical comparison of the different estimators (using actual data) and an empirical study of the sensitivity (robustness) of the class of mixture estimators. The effect of missing data upon crop classification procedures is discussed in detail including a simulation of the missing data effect. The final problem addressed is that of taking yield data (bushels per acre) gathered at several yield stations and extrapolating these values over some specified large region. Computer programs developed in support of some of these activities are described.

Odell, P. L.↗
DOE OSTI2022

New tree-ring data from Canadian boreal and hemi-boreal forests provide insight for improving the climate sensitivity of terrestrial biosphere models

Understanding boreal/hemi-boreal forest growth sensitivity to seasonal variations in temperature and water availability provides important basis for projecting the potential impacts of climate change on the productivity of these ecosystems. Our best available information currently comes from a limited number of field experiments and terrestrial biosphere model (TBM) simulations of varying predictive accuracy. Here, we assessed the sensitivity of annual boreal/hemi-boreal forest growth in Canada to yearly fluctuations in seasonal climate variables using a large tree-ring dataset and compared this to the climate sensitivity of annual net primary productivity (NPP) estimates obtained from fourteen TBMs. We found that boreal/hemi-boreal forest growth sensitivity to fluctuations in seasonal temperature and precipitation variables changed along a southwestern to northeastern gradient, with growth limited almost entirely by temperature in the northeast and west and by water availability in the southwest. We also found a lag in growth climate sensitivity, with growth largely determined by the climate during the summer prior to ring formation. Analyses of NPP sensitivity to the same climate variables produced a similar southwest to northeast gradient in growth climate sensitivity for NPP estimates from all but three TBMs. However, analyses of growth from tree-ring data and analyses of NPP from TBMs produced contrasting evidence concerning the key climate variables limiting growth. While analyses of NPP primarily indicated a positive relationship between growth and seasonal temperature, tree-ring analyses indicated negative growth relationships to temperature. Also, the positive effect of precipitation on NPP derived from most TBMs was weaker than the positive effect of precipitation on tree-ring based growth: temperature had a more important limiting effect on NPP than tree-ring data indicated. These mismatches regarding the key climate variables limiting growth suggested that characterization of tree growth in TBMs might need revision, particularly regarding the effects of stomatal conductance and carbohydrate reserve dynamics.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1977

Investigation of thematic mapper spatial, radiometric, and spectral resolution

Empirical evidence was provided for the definition of system specifications for the LANDSAT Follow-On Thematic Mapper (TM) and other future space Multispectral Sensor (MSS) systems. Specific sensor parameters addressed were spatial resolution, radiometric sensitivity, and to a lesser degree spectral bandwidths and locations. The study used selected available aircraft MSS data, characterized by narrow spectral bands, fine spatial resolution, and high signal-to-noise, as the basis for simulating spacecraft TM data of various spatial resolutions, radiometric sensitivities, and sets of spectral bands. The primary measure used in evaluating the effects of varying spatial and radiometric resolutions was agricultural crop mensuration accuracy using automatic (computer) information extraction techniques.

Morgenstern, J. P.↗
DOE OSTI2020

Imaging of Calibrated Defects in Additively Manufactured Materials: Pulsed Thermal Tomography Nondestructive Examination of Additively Manufactured Reactor Materials and Components

Additive manufacturing (AM, or 3D printing) for commercial nuclear energy applications is an emerging method for cost-efficient manufacturing aimed at replacing aging nuclear reactor parts and reducing costs for new construction. Known material flaws in AM include low-density regions consisting of non-sintered powder, which have to be detected to ensure the safety of long-term performance nuclear reactor components. Currently, limited options are available for nondestructive evaluation (NDE), either during or post manufacturing. As a solution to NDE of AM, we are developing pulsed thermal imaging which is non-contact, one-sided, and scalable to arbitrary size and shape of the AM parts. Pulsed thermography (PT) system utilizes a high intensity flash lamp to rapidly heat surface of sample, and a high sensitivity fast-frame megapixel infrared (IR) camera to capture data of surface temperature variations. The acquired data cube consists of a stack of surface temperature images taken at different times. Information about material internal defects is extracted by analyzing the data cube. This report provides results of preliminary performance evaluation of pulsed thermal imaging capability in detection of imprinted flaws in AM metallic structures. The flaws were introduced into AM parts as imprinted hemispherical low density regions, consisting of trapped un-sintered metallic powder. Specimens for developed for this study consisted of AM stainless steel 316 and Inconel 718 plates. The diameters of imprinted defects varied from 1mm to 8mm, and their depths below the plate flat surface varied between 1mm and 6mm. Pulsed thermal tomography (PTT) processes the measured data cube to obtain 3D reconstructions of material effusivity using a unique inversion algorithm developed at Argonne. PTT has been previously used in imaging of similar size flat bottom hole (FBH) simulated defects in stainless steel 316 and Inconel 718 specimens. In the study involving AM specimens, PTT imaging results have shown that 1mm-diameter defects located 1mm and 2mm below the surface of specimens were detectable. Larger size defects were detectable at greater depth. We also explored an alternative approach to detection of material flaws in PT data cube, which is using neural learning-based approach to blind source separation. Detection of small material defects requires finding features in the data cube which have signal contrast levels approaching sensitivity limit of IR camera. In this study, an optimized Neural Learning based Blind Source Separation (NLBSS) algorithm, including Principal Component Analysis (PCA), and Independent Component Analysis (ICA) is demonstrated to automatically extract principal temporal and spatial features of thermography frames to enhance flaw detection. By using the NLBSS algorithm, material internal defects can be automatically detected. Furthermore, this processing approach compensates for experimental thermal imaging artifacts, such as noise and uneven heating. By merging artificial intelligence with phtotothermics, the NDE system detects internal calibrated defects of various sizes and depths in AM nuclear-grade metallic alloys.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Design sensitivity analysis with Applicon IFAD using the adjoint variable method

A numerical method is presented to implement structural design sensitivity analysis using the versatility and convenience of existing finite element structural analysis program and the theoretical foundation in structural design sensitivity analysis. Conventional design variables, such as thickness and cross-sectional areas, are considered. Structural performance functionals considered include compliance, displacement, and stress. It is shown that calculations can be carried out outside existing finite element codes, using postprocessing data only. That is, design sensitivity analysis software does not have to be imbedded in an existing finite element code. The finite element structural analysis program used in the implementation presented is IFAD. Feasibility of the method is shown through analysis of several problems, including built-up structures. Accurate design sensitivity results are obtained without the uncertainty of numerical accuracy associated with selection of a finite difference perturbation.

Frederick, Marjorie C.↗
NASA NTRSDate not supplied

Assessment of Retrieved GMI Emissivity Over Land, Snow and Sea Ice in the GEOS System

Measurements from microwave sounders and imagers provide a valuable source of information including atmospheric temperature and water vapor in Numerical Weather Prediction (NWP) systems that assimilate these observations directly over water surfaces (oceans and other large water bodies). In a recent decadal survey, targeted observables in the Planetary Boundary Layer (PBL) were cited as a key need for future observations (NASEM, 2018). Microwave observations which sense in the PBL are currently available, however, utilizing surface-sensitive microwave observations for atmospheric data assimilation remains a challenge over land, snow and sea ice. This is in part due to the inability of surface emissivity models used by NWP data assimilation systems to simulate observations with sufficient accuracy. The GEOS-ADAS (Todling and el Akkraoui, 2018) which utilizes the Community Radiative Transfer Model (CRTM) (Han, 2006; Chen 2009) is no exception. The ECMWF system has retrieved instantaneous surface emissivity from surface-sensitive channels for SSMI/S and MHS radiance observations, and apply these estimates to the closest channels higher in frequency (Baordo and Geer 2016) in the calculation of simulated radiances. This approach currently is also being tested in the GEOS-ADAS for AMSU-A and ATMS radiances (Zhu et al. 2021). No or minimal emissivity spectral variability has been assumed in the above-mentioned studies. Recently, work by Munchak et al., 2020 (hereby referred to as M2020) provided a new database for emissivity over land, snow and sea ice retrieved from the NASA Global Precipitation Mission (GPM). Compared with Tool to Estimate Land Surface Emissivities at Microwave (TELSEM2; Wang et al., 2017), M2020 provides emissivities for more frequencies(i.e., 10.7 GHz V/H). Moreover, this database is unique in that it utilizes both active and passive data to retrieve surface emissivity and normalized radar cross section. While the emissivity values may be useful for other sensors, they are most applicable to the GPM Microwave Imager (GMI). In this work the GEOS-ADAS is modified to utilize emissivity values from Munchak et al, 2020 in place of values used by CRTM. Presently, only GMI radiances over ocean are used in the operational GEOS-ADAS. This study will focus on the GMI radiances over land, snow, and ice, as a first attempt to evaluate GMI radiances over these non-water surface types. Two cases are then presented, one with one week of observation minus background departures using the modified GEOS-ADAS, and one utilizing the original GEOS-ADAS. It should be noted that the surface emissivity models in CRTM are not state of the art and are scheduled to be replaced by the Community Surface Emissivity Module (CSEM; Chen and Weng, 2016). Simulations using default CRTM emissivity values are used merely as reference comparing against M2020, and is not a thorough comparison against other more state of the art modules such as CSEM.

GMI↗