Search NASA⌕ Search

SEARCH · Search NASA

Results for “Value Chain”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Antiferro- and metamagnetism in the S = 7 / 2 hollandite analog Eu Ga 2 Sb 2

Recent work analyzing the impact of nonsymmorphic symmetries on electronic states has given rise to the discovery of multiple types of topological matter. Here we report the single-crystal synthesis and magnetic properties of Eu Ga 2 Sb 2 , a Eu-based antiferromagnet structurally consisting of pseudo-1D chains of Eu ions related by a nonsymmorphic glide plane. Here we find the onset of antiferromagnetic order at T N = 8K. Above T N the magnetic susceptibility is isotropic. Curie-Weiss analysis suggests competing ferromagnetic and antiferromagnetic interactions, with p eff = 8.1 μ B as expected for 4f 7 J = S = 7/2 Eu 2+ ions. Below T N and at low applied magnetic fields, an anisotropy develops linearly, reaching χ ⊥ /χ ∥ = 6 at T = 2K. There is concomitant metamagnetic behavior along χ ∥ , with a magnetic field of μ 0 H ≈ 0.5 T sufficient to suppress the anisotropy. Independent of crystal orientation, there is a continuous evolution to a field-polarized paramagnetic state with M = 7μ B /Eu 2+ at μ 0 H = 2 T as T → 0 K. Specific-heat measurements show a recovered magnetic entropy of ΔS mag ≈ 16.4 Jmol –1 K –1 from T ~ 0 K to T = T N , close to the expected value of R ln(8) for an S = 7/2 ion, indicating negligible low-dimensional spin fluctuations above T N . We find no evidence of unusual behaviors arising either from the dimensionality or the presence of the nonsymmorphic symmetries.

1-dimensional spin chains↗

Shock tube measurements of growth constants in the branched chain formaldehyde-carbon monoxide-oxygen system

Exponential free radical growth constants were measured for formaldehyde carbon monoxide-oxygen systems by monitoring the growth of oxygen atom concentration as manifested by CO flame band emission. Data were obtained over the temperature range of 1200 to 2000 K. The data were analyzed using a formaldehyde oxidation mechanism involving 12 elementary reaction steps. The computed growth constants are roughly in accord with experimental values, but are much more temperature dependent. The data was also analyzed assuming formaldehyde is rapidly decomposed to carbon monoxide and hydrogen. Growth constants computed for the resulting carbon monoxide hydrogen oxygen mixtures have a temperature dependence similar to experiments; however, for most mixtures, the computed growth constants were larger than experimental values.

Brabbs, T. A.↗

Data Centers and Digital Assurance Introduction to Supply Chain and Cybersecurity for Data Centers, Session 1

The first session of the TADA (Technical Assistance for Digital Assurance) Data Centers Cohort Workshop, held on October 30, 2025, introduced foundational concepts of Digital Assurance in the context of data center and grid integration. Sponsored by the U.S. Department of Energy, the workshop brought together utilities, data center operators, developers, and vendors to address cybersecurity and supply chain vulnerabilities. The session emphasized the growing criticality of data centers within the electric grid and the need for secure, real-time, bidirectional communication. Participants explored the principles of Digital Assurance, including cybersecurity, cyber-informed engineering (CIE), and lifecycle security, and applied a threat-vulnerability-consequence framework to identify and mitigate risks at the data center–grid interface. Discussions covered a range of threats such as spoofed dispatch signals and insider threats, architectural vulnerabilities like SCADA interfaces and insecure protocols, and potential consequences including cascading grid failures. The session also raised strategic questions about business value, vendor assurance, and defining cyber boundaries and responsibilities. This foundational workshop set the stage for deeper technical analysis and the development of actionable frameworks in subsequent sessions. Session 1 of 3.

24 - POWER TRANSMISSION AND DISTRIBUTION↗

Optical spectra of the silicon-terminated carbon chain radicals SiC{sub n}H (n = 3,4,5)

The gas-phase optical spectra of three silicon-terminated carbon chain radicals, SiC{sub n}H (n = 3 − 5), formed in a jet-cooled discharge of silane and acetylene, have been investigated by resonant two-color two-photon ionization and laser-induced fluorescence/dispersed fluorescence. Analysis of the spectra was facilitated by calculations performed using equation-of-motion coupled cluster methods. For SiC{sub 3}H and SiC{sub 5}H, the observed transitions are well-described as excitations from a {sup 2}Π ground state to a {sup 2}Σ state, in which vibronic coupling, likely involving a higher-lying Π state with a very large predicted f-value (close to unity), is persistent. The lowest {sup 2}Σ states of both species are characterized by a rare silicon triple bond, which was identified previously [T. C. Smith, H. Y. Li, D. J. Clouthier, C. T. Kingston, and A. J. Merer, J. Chem. Phys. 112, 3662 (2000)] in the lowest {sup 2}Σ state of SiCH. Although a strong Π − Π transition is predicted for SiC{sub 4}H, the observed spectrum near 505 nm more likely corresponds to excitation to a relatively dark Σ state which is vibronically coupled to a nearby Π state. In contrast to the chains with an odd number of carbon atoms, which exhibit relatively sharp spectral features and lifetimes in the 10–100 ns range, SiC{sub 4}H shows intrinsically broadened spectral features consistent with a ∼100 fs lifetime, and a subsequent long-lived decay (>50 μs) which we ascribe to mixing with a nearby quartet state arising from the same electronic configuration. The spin-orbit coupling constants for both SiC{sub 3}H and SiC{sub 5}H radicals were determined to be approximately 64 cm{sup −1}, similar to that of SiCH (69.8 cm{sup −1}), suggesting that the unpaired electron in these species is localized on the silicon atom. Motivated by the new optical work, the rotational spectrum of linear SiC{sub 3}H was detected by cavity Fourier-transform microwave spectroscopy in the 13–34 GHz range. Each rotational transition from the {sup 2}Π{sub 3/2} ground state exhibits well-resolved Λ-doubling and hyperfine structure; the derived rotational constant of B = 2.605 GHz is in excellent agreement with our calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Overexpression of DBC1, correlated with poor prognosis, is a potential therapeutic target for hepatocellular carcinoma

Highlights: • DBC1 was upregulated in HCC tissues and cell lines. • Overexpression of DBC1 was correlated with clinicopathological parameters in HCC. • Overexpression of DBC1 predicts poor disease-free survival (DFS) and overall survival (OS) in HCC. • Knockdown of DBC1 inhibits HCC cell lines proliferation. Deleted in Breast Cancer 1 (DBC1) is a regulatory protein involved in cell metabolism and cancer progression. Nevertheless, the expression and prognostic values of DBC1 in hepatocellular carcinoma (HCC) are still not well understood. The following study investigated the clinical significance and biological function of DBC1 in HCC. Briefly, overexpression of DBC1 at transcriptional and translational levels in human HCC tissues compared to adjacent normal tissues was observed using quantitative real-time polymerase chain reaction (qRT-PCR), western blot (WB) and immunohistochemistry (IHC) approach. Furthermore, upregulated DBC1 was significantly correlated with tumor size (p = 0.005), N stage (p = 0.016), M stage (p = 0.011), tumor differentiation (p in vitro. To conclude, these findings demonstrated that DBC1 was essential in tumorigenesis and proliferation. Moreover, it was identified as a potential therapeutic target for HCC.

60 APPLIED LIFE SCIENCES↗

Structural characterization of C-S-H and C-A-S-H samples-Part I: Long-range order investigated by Rietveld analyses

Rietveld analyses on samples belonging to C-S-H and C-A-S-H series (0.8<=C/S<=1.7) were realized on X-ray powder patterns. The tobermorite M model was successfully used to refine all the powder patterns from C-S-H samples whatever the C/S value. This gives clear indication on the steady change in a unique structural description, corresponding to a 'tobermorite M defect' model, when passing from C-S-H(I) (C/S<1.0) to C-S-H(II) type (C/S>1.0). The possibility for both C-S-H types (from polymerized silicate chains to isolated silicate dimers) to accommodate the same structural model is explained by the continuous evolution of the occupancies of the cationic sites: the interlayer Ca atoms, the Si atoms from paired and bridging silicates. Accurate refinements of the structural and microstructural parameters evidenced the well crystallized feature of C-S-H phase combined with a small coherent domain size. Insertion of Al atoms in the C-S-H structure (C-A-S-H phase) involves a clear disruption into the layered atomic framework. The large increase of layer spacing observed when incorporating aluminum into C-S-H indicates that Al atoms should be located in the interlayer region of the structure in new crystallographic sites. Aluminum atoms are not substituted silicon crystallographic sites or interlayer calcium crystallographic sites. - Graphical abstract: The Tobermorite M model has been successfully used to perform Rietveld analyses on X-ray powder patterns from C-S-H samples. Refinement of the cationic site occupancies explains the evolution from the linear silicate chains to the isolated silicate dimers when increasing the C/S ratio.

36 MATERIALS SCIENCE↗

Evaluating proteome allocation of Saccharomyces cerevisiae phenotypes with resource balance analysis

Saccharomyces cerevisiae is an important model organism and a workhorse in bioproduction. Here, we reconstructed a compact and tractable genome-scale resource balance analysis (RBA) model (i.e., named scRBA) to analyze metabolic fluxes and proteome allocation in a computationally efficient manner. Resource capacity models such as scRBA provide the quantitative means to identify bottlenecks in biosynthetic pathways due to enzyme, compartment size, and/or ribosome availability limitations. ATP maintenance rate and in vivo apparent turnover numbers (k app ) were regressed from metabolic flux and protein concentration data to capture observed physiological growth yield and proteome efficiency and allocation, respectively. Estimated parameter values were found to vary with oxygen and nutrient availability. Altogether, this work (i) provides condition-specific model parameters to recapitulate phenotypes corresponding to different extracellular environments, (ii) alludes to the enhancing effect of substrate channeling and post-translational activation on in vivo enzyme efficiency in glycolysis and electron transport chain, and (iii) reveals that the Crabtree effect is underpinned by specific limitations in mitochondrial proteome capacity and secondarily ribosome availability rather than overall proteome capacity.

59 BASIC BIOLOGICAL SCIENCES↗

High-field spin-flop state in green dioptase

The high-field magnetic properties and magnetic order of the gem mineral green dioptase Cu 6 [Si 6 O 18 ] .6 H 2 O have been studied by means of single-crystal neutron diffraction in magnetic fields up to 21 T and magnetization measurements up to 30 T. In zero field, the Cu 2+ moments in the antiferromagnetic chains are oriented along the c axis with a small off-axis tilt. For a field applied parallel to the c axis, the magnetization shows a spin-flop-like transition at B*=12.2 T at 1.5 K. Neutron diffraction experiments show a smooth behavior in the intensities of the magnetic reflections without any change in the periodicity of the magnetic structure. Bulk and microscopic observations are well described by a model of ferromagnetically coupled antiferromagnetic X X Z spin-$\frac{1}{2}$ chains, taking into account a change of the local easy-axis direction. We demonstrate that the magnetic structure evolves smoothly from a deformed Néel state at low fields to a deformed spin-flop state in a high field via a strong crossover around B*. The results are generalized for different values of interchain coupling and spin anisotropy.

36 MATERIALS SCIENCE↗

maranasgroup/scRBA

Saccharomyces cerevisiae is an important model organism and a workhorse in bioproduction. Here, we reconstructed a compact and tractable genome-scale resource balance analysis (RBA) model (i.e., named scRBA) to analyze metabolic fluxes and proteome allocation in a computationally efficient manner. Resource capacity models such as scRBA provide the quantitative means to identify bottlenecks in biosynthetic pathways due to enzyme, compartment size, and/or ribosome availability limitations. ATP maintenance rate and in vivo apparent turnover numbers (kapp) were regressed from metabolic flux and protein concentration data to capture observed physiological growth yield and proteome efficiency and allocation, respectively. Estimated parameter values were found to vary with oxygen and nutrient availability. Overall, this work (i) provides condition-specific model parameters to recapitulate phenotypes corresponding to different extracellular environments, (ii) alludes to the enhancing effect of substrate channeling and post-translational activation on in vivo enzyme efficiency in glycolysis and electron transport chain, and (iii) reveals that the Crabtree effect is underpinned by specific limitations in mitochondrial proteome capacity and secondarily ribosome availability rather than overall proteome capacity.

Dinh, Hoang↗

Moderate-resolution K-band Spectroscopy of Substellar Companion κ Andromedae b

We present moderate-resolution (R ∼ 4000) K-band spectra of the “super-Jupiter,” κ Andromedae b. The data were taken with the OSIRIS integral field spectrograph at Keck Observatory. The spectra reveal resolved molecular lines from H{sub 2}O and CO, and are compared to a custom PHOENIX atmosphere model grid appropriate for young planetary-mass objects. We fit the data using a Markov chain Monte Carlo forward-modeling method. Using a combination of our moderate-resolution spectrum and low-resolution, broadband data from the literature, we derive an effective temperature of T {sub eff} = 1950–2150 K, a surface gravity of logg=3.5--4.5, and a metallicity of [M/H] = −0.2–0.0. These values are consistent with previous estimates from atmospheric modeling and the currently favored young age of the system (<50 Myr). We derive a C/O ratio of 0.70{sub −0.24}{sup +0.09} for the source, broadly consistent with the solar C/O ratio. This, coupled with the slightly subsolar metallicity, implies a composition consistent with that of the host star, and is suggestive of formation by a rapid process. The subsolar metallicity of κ Andromedae b is also consistent with predictions of formation via gravitational instability. Further constraints on formation of the companion will require measurement of the C/O ratio of κ Andromedae A. We also measure the radial velocity of κ Andromedae b for the first time, with a value of −1.4 ± 0.9 km s{sup −1} relative to the host star. We find that the derived radial velocity is consistent with the estimated high eccentricity of κ Andromedae b.

79 ASTRONOMY AND ASTROPHYSICS↗

Reactivation and shedding of cytomegalovirus in astronauts during spaceflight

The reactivation of cytomegalovirus (CMV) in 71 astronauts was investigated, using polymerase chain reaction. A significantly greater (P<.0001) shedding frequency was found in urine samples from astronauts before spaceflight (10.6%) than in urine from the healthy control subject group (1.2%). Two of 4 astronauts studied during spaceflight shed CMV in urine. A significant increase (P<.0001) in CMV antibody titer, compared with baseline values, was also found 10 days before spaceflight. CMV antibody titer was further increased (P<.001) 3 days after landing, compared with 10 days before the mission. Significant increases in stress hormones were also found after landing. These results demonstrate that CMV reactivation occurred in astronauts before spaceflight and indicate that CMV may further reactivate during spaceflight.

NASA Center JSC↗

Inelastic neutron scattering study of the anisotropic S = 1 spin chain [ Ni ( HF 2 ) ( 3 – Clpyridine ) 4 ] BF 4

[Ni(HF 2 )(3–Clpyridine) 4 ]BF 4 (NBCT) is a one-dimensional, S = 1 spin chain material that shows no magnetic neutron Bragg peaks down to temperatures of 0.1 K. Previous work identified NBCT as being in the Haldane phase and near a quantum phase transition as a function of D/J to the large-D quantum paramagnet phase (QPM), where D is the axial single-ion anisotropy and J is the intrachain superexchange. Herein, inelastic neutron scattering results are presented on partially deuterated, 11B-enriched NBCT polycrystalline samples in zero magnetic field and down to temperatures of 0.3 K. Comparison to density matrix renormalization group calculations yields D/J = 1.51 and a significant rhombic single-ion anisotropy E (E/D ≈ 0.03, E/J ≈ 0.05). Here, these D, J, and E values place NBCT in the large-D QPM phase but precipitously near a quantum phase transition to a long-range ordered phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-quasiparticle structures and isomers in {sup 168}Er, {sup 170}Er, and {sup 172}Er

The stable and neutron-rich isotopes {sup 168}Er, {sup 170}Er, and {sup 172}Er have been studied with Gammasphere using inelastic excitation with energetic {sup 136}Xe beams. The previously assigned structures based on the proposed K{sup p}i=4{sup -} isomeric intrinsic states in both {sup 168}Er and {sup 170}Er have been re-evaluated and an equivalent band identified in {sup 172}Er. In {sup 170}Er, the identification of a K{sup p}i=6{sup -} band with transitions close in energy to those of the 4{sup -} band leads to a modified interpretation, since the overlap would have compromised previous analyses. The g{sub K}-g{sub R} values for the 4{sup -} bands deduced from the in-band gamma-ray intensities for the sequence of isotopes suggest a predominantly two-neutron configuration in {sup 168}Er, an equally mixed two-neutron, two-proton configuration in {sup 170}Er, and a two-proton configuration in {sup 172}Er. A comprehensive decay scheme for the previously proposed 6{sup +} isomer in {sup 172}Er has also been established, as well as band structures built on this isomer that closely resemble the 6{sup +} and 7{sup -} two-neutron structures known in the isotone {sup 174}Yb. The implied K hindrances are discussed. The main decay path of the 6{sup +} isomer occurs through the newly identified 4{sup -} isomer. The measured lifetimes of the 4{sup -} and 6{sup +} isomers in {sup 172}Er are 57(3) and 822(90) ns, respectively. Multiquasiparticle calculations support the suggested configuration changes across the isotopic chain.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Revealing the Hidden Value that the Federal Investment Tax Credit and Treasury Cash Grant Provide To Community Wind Projects

Although the global financial crisis of 2008/2009 has slowed wind power development in general, the crisis has, in several respects, been a blessing in disguise for community wind project development in the United States. For xample, the crisis-induced slowdown in the broader commercial wind market has, for the first time since 2004, created slack in the supply chain, creating an opportunity for shovel-ready community wind projects to finally proceed towards onstruction. Many such projects had been forced to wait on the sidelines as the commercial wind boom of 2005-2008 consumed virtually all available resources needed to complete a wind project (e.g., turbines, cranes, contractors).

17 WIND ENERGY↗

Update on the United States Advanced Ultra-Supercritical Program with Full Scale Component Fabrication to Develop Utility Scale Power Plants with 760°C Steam Temperature

Following the successful completion of a 15-year effort to develop and test materials that would allow coal-fired power plants to be operated at advanced ultra-supercritical (A-USC) steam conditions, a United States-based consortium is presently engaged in Phase 2 of a project which includes an advanced manufacturing effort to complete US-based supply chain development for full commercial scale (800-850 MWe) A-USC components made of nickel-based alloys, components operating at up to 760°C. The project, funded under U.S. Department of Energy Award No. DE-FE0025064, falls under the US DOE overall goal to Develop cost-effective, reliable technologies to improve the efficiency of new and existing coal-fired power plants. A-USC steam cycles have the potential to improve cycle efficiency, reduce fuel costs, and reduce greenhouse gas emissions. Current development and demonstration efforts are focused on enabling the construction of A-USC plants, operating with steam temperatures as high as 1400°F (760°C) and steam pressures up to 5000 psi (35 MPa), which can potentially increase cycle efficiencies to 47% HHV (higher heating value), or approximately 50% LHV (lower heating value), and reduce CO 2 emissions by roughly 25%, compared to today’s U.S. fleet. A-USC technology provides a lower-cost method to reduce CO 2 emissions, compared to CO 2 capture technologies, while retaining a viable coal option for owners of coal generation assets. Among the specific goals of Phase 2 of the ComTest Project are to: validate that components made from advanced nickel-based alloys can operate and perform under A-USC conditions accelerate the development of a U.S.-based supply chain for the full complement of A-USC components close the remaining gaps and reduce the risks for manufacturing components from advanced materials for commercial demonstration fabricate full-scale versions of selected key components made of nickel-based alloys validate a qualified U.S. supply chain, to provide greater cost certainty for components obtain American Society of Mechanical Engineers (ASME) code approval for new materials, components and processes Additional benefit: Manufacturing technology will be applicable to other advanced fossil energy high temperature cycles, and can support increased flexibility of existing power plants The ComTest project is managed by Energy Industries of Ohio, and technically directed by the Electric Power Research Institute, Inc., with General Electric designing the A-USC components. As stated earlier, the current phase of the effort is primarily funded by the U.S. Department of Energy, through the National Energy Technology Laboratory. This presentation outlines the motivation for the project, explains the project’s structure and schedule, and provides some of the technical details on the design of the ComTest components.

01 COAL, LIGNITE, AND PEAT↗

Update on the United States Advanced Ultra-Supercritical Program with Full Scale Component Fabrication to Develop Utility Scale Power Plants with 760°C Steam Temperature

Following the successful completion of a 15-year effort to develop and test materials that would allow coal-fired power plants to be operated at advanced ultra-supercritical (A-USC) steam conditions, a United States-based consortium is presently engaged in Phase 2 of a project which includes an advanced manufacturing effort to complete US-based supply chain development for full commercial scale (800-850 MWe) A-USC components made of nickel-based alloys, components operating at up to 760°C. The project, funded under U.S. Department of Energy Award No. DE-FE0025064, falls under the US DOE overall goal to Develop cost-effective, reliable technologies to improve the efficiency of new and existing coal-fired power plants. A-USC steam cycles have the potential to improve cycle efficiency, reduce fuel costs, and reduce greenhouse gas emissions. Current development and demonstration efforts are focused on enabling the construction of A-USC plants, operating with steam temperatures as high as 1400°F (760°C) and steam pressures up to 5000 psi (35 MPa), which can potentially increase cycle efficiencies to 47% HHV (higher heating value), or approximately 50% LHV (lower heating value), and reduce CO 2 emissions by roughly 25%, compared to today’s U.S. fleet. A-USC technology provides a lower-cost method to reduce CO 2 emissions, compared to CO 2 capture technologies, while retaining a viable coal option for owners of coal generation assets. Among the specific goals of Phase 2 of the ComTest Project are to: validate that components made from advanced nickel-based alloys can operate and perform under A-USC conditions accelerate the development of a U.S.-based supply chain for the full complement of A-USC components close the remaining gaps and reduce the risks for manufacturing components from advanced materials for commercial demonstration fabricate full-scale versions of selected key components made of nickel-based alloys validate a qualified U.S. supply chain, to provide greater cost certainty for components obtain American Society of Mechanical Engineers (ASME) code approval for new materials, components and processes Additional benefit: Manufacturing technology will be applicable to other advanced fossil energy high temperature cycles, and can support increased flexibility of existing power plants The ComTest project is managed by Energy Industries of Ohio, and technically directed by the Electric Power Research Institute, Inc., with General Electric designing the A-USC components. As stated earlier, the current phase of the effort is primarily funded by the U.S. Department of Energy, through the National Energy Technology Laboratory. This presentation outlines the motivation for the project, explains the project’s structure and schedule, and provides some of the technical details on the design of the ComTest components.

01 COAL, LIGNITE, AND PEAT↗

Uranium integral fission product yields for a spectrally-shaped 14.1 MeV neutron source at the National Ignition Facility

This paper describes the experimental results for an energy tuning assembly created to modify the National Ignition Facility deuterium–tritium fusion neutron source into a notional thermonuclear and prompt fission neutron spectrum, which has applications in integral measurements, nuclear data benchmarks, and radiation effects on microelectronics. The Monte Carlo neutron transport utilized MCNP5 to estimate the ETA-modified fluence using the ENDF-B/VIII.0 and IRDFF-II continuous energy nuclear data libraries, and SCALE Sampler was used to estimate the systematic nuclear data covariance using ENDF-B/VII.1 and IRDFF-II in a 252-group structure. The experiment fielded eight activation foils and a highly enriched uranium sample. This provided fifteen reaction channels that were used in a forward-fit comparison to the modeled results and to unfold the neutron spectrum using STAYSL. Gamma-ray spectrometry was performed on the activation and highly enriched uranium foils, and the reduced Χ 2 between the modeled and experimental values was 1.21. The results from the STAYSL unfold, reduced Χ 2 = 1.62, indicated that the modeled neutron spectrum was achieved and the systematic nuclear data uncertainty associated with the neutron transport and activation product cross sections was representative of the experiment. Integral cumulative fission product yield data were collected for 37 mass chains with a combination of gamma-ray spectrometry and radiochemical analysis. Fission product analysis was generally in agreement with two models using a semi-empirical fit and the General Observables of Fission code, with the exception of mass chains 88, 109, 111, 112, 113, 129, 139, 142, 144, 151, and 156.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Numerical investigation of the pressure-dependence of yield sooting indices for n-alkane and aromatic species

The pressure-dependence of the Yield Sooting Index (YSI), as a measure of sooting tendency, is numerically investigated for pressures ranging from 1 atm to 15 atm. Straight-chain alkanes, including ethane, propane, n-hexane, n-heptane, and n-dodecane, and aromatic species, including benzene, toluene, xylene, and ethylbenzene, are selected as test fuels. A detailed chemical mechanism is used for all test fuels considered, and a flamelet-based YSI simulation methodology is employed, where the YSI values are computed based on the Polycyclic Aromatic Hydrocarbon (PAH) dimer production rate at each pressure. It is found that the maximum flame centerline soot volume fraction increases with increasing pressure for all test compounds. However, the pressure dependence of the maximum soot volume fraction is similar for the hydrocarbons within the same class (n-alkane or aromatics). As a consequence, the YSI values computed at pressures up to 15 atm show only small deviations from their values computed and measured at atmospheric pressure. These results suggest that YSI is robust also at elevated pressures, close to those found in practical combustion devices. This study is entirely based on numerical simulations without any experimental measurements available for direct validation. Experimental YSI measurements at high pressures would be required to fully confirm the conclusions reported in this manuscript. Still, our numerical results provide some guidelines for the design of such experiments in the future.

42 ENGINEERING↗