Search NASA⌕ Search

SEARCH · Search NASA

Results for “Vibrational Structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Vibration-Based Techniques for Concrete Structural Health Monitoring. Light Water Reactor Sustainability Program report

The objectives of this ongoing research project focus on health monitoring and data analytics of concrete slabs containing reactive aggregates and thus subjected to degradation due to alkali-silica reaction (ASR). A controlled concrete slab with four pockets of reactive aggregates (pure silica, and reactive aggregates from three different quarries) was cast at Vanderbilt University and cured in representative conditions to accelerate degradation due to ASR. A set of four concrete samples were also cast and cured at the University of Alabama for ASR testing. Of these four samples, two slabs contained reactive aggregates while the other two had the non-reactive aggregate counterparts mixed throughout the samples. Four additional slabs were cast and cured at the University of Nebraska- Lincoln. Of these four samples; one contained non-reactive aggregates and no reinforcement, one contained reactive aggregates and no reinforcement, one contained reactive aggregates and rebar reinforcement in one direction, and the last contained reactive aggregates and reinforcement in two directions. Single frequency and dual frequency tests were used on these slabs to locate ASR damage within the specimens containing reactive aggregates. The vibration tests were conducted with different sensor and actuator configurations to facilitate damage detection and localization. The results from the data analysis of the dynamic testing on concrete slabs are discussed in detail in this report. Results for damage localization are dependent on multiple parameters used in the tests. This report investigates different methods of data fusion including voting, raw averaging, damage index averaging, and Bayesian fusion.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

First Full Structural Characterization of Chloro Formamidinium Salts

While the synthesis of chloro formamidinium chloride has been known for over one century, no solid‐state structure of a chlorine‐substituted formamidinium compound has been reported up to now. Herein, we describe syntheses, solid‐state structures, and vibrational properties of four chloro formamidinium compounds, namely [ClC(NH 2 ) 2 ]Cl ( 1 ), [ClC(NH 2 ) 2 ](AuCl 4 ) ( 2 ), [ClC(NH 2 ) 2 ] 2 (PdCl 4 ) ( 3 ), and [ClC(NH 2 ) 2 ] 2 (PtCl 6 ) ( 4 ), as determined by single‐crystal X‐ray diffraction (SCXRD). 1 and 3 crystallize in the monoclinic space group P 2 1 / c , 2 in the orthorhombic space group Pbcn , whereas 4 adopts the triclinic space group P 1 . By using a combination of high‐resolution time‐of‐flight neutron powder diffraction, state‐of‐the‐art DFT calculations as well as IR spectroscopy, the prior SCXRD result was fully confirmed and augmented by determining the hydrogen‐bonded molecular networks. First‐principles electronic‐structure calculations corroborate the ionic nature of these salts by showing very flat, molecular‐like bands next to the Fermi level, in addition to indirect bandgaps. This study underlines the upmost importance of complementing diffraction data by ab initio calculations, as theory‐derived anisotropic displacement parameters served as fixed numerical entries.

Möller, Andreas↗

The study of basis sets for the calculation of the structure and dynamics of the benzene-Kr complex

An ab initio intermolecular potential energy surface (PES) has been constructed for the benzene-krypton (BKr) van der Waals (vdW) complex. The interaction energy has been calculated at the coupled cluster level of theory with single, double, and perturbatively included triple excitations using different basis sets. As a result, a few analytical PESs of the complex have been determined. They allowed a prediction of the complex structure and its vibrational vdW states. The vibrational energy level pattern exhibits a distinct polyad structure. Comparison of the equilibrium structure, the dipole moment, and vibrational levels of BKr with their experimental counterparts has allowed us to design an optimal basis set composed of a small Dunning’s basis set for the benzene monomer, a larger effective core potential adapted basis set for Kr and additional midbond functions. Such a basis set yields vibrational energy levels that agree very well with the experimental ones as well as with those calculated from the available empirical PES derived from the microwave spectra of the BKr complex. The basis proposed can be applied to larger complexes including Kr because of a reasonable computational cost and accurate results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phonon Dispersion Relation of Bulk Boron-Doped Graphitic Carbon

In this work, bulk turbostratic graphitic carbon of varying levels of disorder and chemical compositions has been synthesized by a direct synthesis method in the temperature range of 750–1100 °C, with a focus on boron incorporation within the graphitic lattice. The atomistic and electronic/vibrational structures were characterized by X-ray diffraction, energy-dispersive X-ray spectroscopy, Auger electron spectroscopy, X-ray absorption spectroscopy, and Raman spectroscopy. The phonon dispersion relation of graphitic carbon was found to be uniquely sensitive to substitutional boron doping, which perturbs the phonon structure while leaving the lattice structure unchanged. The dispersion relation of the D peak measured by Raman spectroscopy can be used to uniquely identify bulk graphitic materials containing a large content of ordered trigonal planar g-BC 3 units, which are of high interest in applications ranging from hydrogen storage to lithium-ion batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Trends in alkali metal hydrosulfides: A combined Fourier transform microwave/millimeter-wave spectroscopic study of KSH (X{sup ~1}A{sup ′})

The pure rotational spectrum of KSH (X{sup ~1}A{sup ′}) has been measured using millimeter-wave direct absorption and Fourier transform microwave (FTMW) techniques. This work is the first gas-phase experimental study of this molecule and includes spectroscopy of KSD as well. In the millimeter-wave system, KSH was synthesized in a DC discharge from a mixture of potassium vapor, H{sub 2}S, and argon; a discharge-assisted laser ablation source, coupled with a supersonic jet expansion, was used to create the species in the FTMW instrument. Five and three rotational transitions in the range 3–57 GHz were recorded with the FTMW experiment for KSH and KSD, respectively, in the K{sub a} = 0 component; in these data, potassium quadrupole hyperfine structure was observed. Five to six transitions with K{sub a} = 0–5 were measured in the mm-wave region (260–300 GHz) for the two species. The presence of multiple asymmetry components in the mm-wave spectra indicates that KSH has a bent geometry, in analogy to other alkali hydrosulfides. The data were analyzed with an S-reduced asymmetric top Hamiltonian, and rotational, centrifugal distortion, and potassium electric quadrupole coupling constants were determined for both isotopolgues. The r{sub 0} geometry for KSH was calculated to be r{sub S-H} = 1.357(1) Å, r{sub K-S} = 2.806(1) Å, and θ{sub M-S-H} (°) = 95.0 (1). FTMW measurements were also carried out on LiSH and NaSH; metal electric quadrupole coupling constants were determined for comparison with KSH. In addition, ab initio computations of the structures and vibrational frequencies at the CCSD(T)/6-311++G(3df,2pd) and CCSD(T)/aug-cc-pVTZ levels of theory were performed for LiSH, NaSH, and KSH. Overall, experimental and computational data suggest that the metal-ligand bonding in KSH is a combination of electrostatic and covalent forces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-driven mechanical anisotropy and destabilization in zeolitic imidazolate frameworks

Here, the anisotropic mechanical response of ZIF-8 and ZIF-67 is investigated as a function of pressure and its main features (including shear-destabilization eventually leading to amorphization) discussed in terms of specific lattice vibrations and structural changes occurring in the framework. At zero pressure, the two ZIFs are characterized by an elastic anisotropy with directions of maximum and minimum stiffness along < 111 > and < 100 >, respectively. At P = 0.2 GPa, the framework exhibits a perfectly isotropic mechanical response, while at P > 0.2 GPa a different (complementary) anisotropic response is observed with directions of maximum and minimum stiffness along < 100 > and < 111 >, respectively. The bulk modulus of the two ZIFs initially slightly increases up to 0.1 GPa of pressure and then decreases at higher pressures. Amorphization in both ZIF-8 and ZIF-67 is confirmed to be due to the pressure-driven mechanical instability of their frameworks to shear deformations. The directional elastic moduli of the two ZIFs are partitioned into contributions from specific normal modes of vibration. The elastic constants C 11 , and C 12 [and thus the bulk modulus K = 1/3(C 11 +2C 12 )] are mostly affected by symmetric “gate-opening” vibrations of the imidazolate linkers in the four-membered rings. The C 44 shear elastic constant (and thus the mechanical instability and amorphization of the framework) are instead related to asymmetric “gate-opening” vibrations of the four-membered rings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical research program to study chemical reactions in AOTV bow shock tubes

The main focus was the development, implementation, and calibration of methods for performing molecular electronic structure calculations to high accuracy. These various methods were then applied to a number of chemical reactions and species of interest to NASA, notably in the area of combustion chemistry. Among the development work undertaken was a collaborative effort to develop a program to efficiently predict molecular structures and vibrational frequencies using energy derivatives. Another major development effort involved the design of new atomic basis sets for use in chemical studies: these sets were considerably more accurate than those previously in use. Much effort was also devoted to calibrating methods for computing accurate molecular wave functions, including the first reliable calibrations for realistic molecules using full CI results. A wide variety of application calculations were undertaken. One area of interest was the spectroscopy and thermochemistry of small molecules, including establishing small molecule binding energies to an accuracy rivaling, or even on occasion surpassing, the experiment. Such binding energies are essential input to modeling chemical reaction processes, such as combustion. Studies of large molecules and processes important in both hydrogen and hydrocarbon combustion chemistry were also carried out. Finally, some effort was devoted to the structure and spectroscopy of small metal clusters, with applications to materials science problems.

Taylor, Peter R.↗

From thermoelectric bulk to nanomaterials: Current progress for Bi 2 Te 3 and CoSb 3 : From thermoelectric bulk to nanomaterials

We synthesized Bi 2 Te 3 and CoSb 3 based nanomaterials and their thermoelectric, structural, and vibrational properties analyzed to assess and reduce ZT-limiting mechanisms. The same preparation and/or characterization methods were applied in the different materials systems. Single-crystalline, ternary p-type Bi 15 Sb 29 Te 56 , and n-type Bi 38 Te 55 Se 7 nanowires with power factors comparable to nanostructured bulkmaterialswere prepared by potential-pulsed electrochemical deposition in a nanostructured Al 2 O 3 matrix. p-type Sb 2 Te 3 , n-type Bi 2 Te 3 , and n-type CoSb 3 thin films were grown at room temperature using molecular beam epitaxy and were subsequently annealed at elevated temperatures. It yielded polycrystalline, single phase thin films with optimized charge carrier densities. In CoSb 3 thin films the speed of sound could be reduced by filling the cage structure with Yb and alloying with Fe yielded p-type material. Bi 2 (Te 0.91 Se 0.09 ) 3 /SiC and (Bi 0.26 Sb 0.74 ) 2 Te 3 /SiC nanocomposites with low thermal conductivities and ZT values larger than 1 were prepared by spark plasma sintering. Nanostructure, texture, chemical composition, as well as electronic and phononic excitations were investigated by X-ray diffraction, nuclear resonance scattering, inelastic neutron scattering, M ossbauer spectroscopy, and transmission electron microscopy. Furthermore, for Bi 2 Te 3 materials, ab-initio calculations together with equilibrium and non-equilibrium molecular dynamics simulations for point defects yielded their formation energies and their effect on lattice thermal conductivity, respectively. Current advances in thermoelectric Bi 2 Te 3 and CoSb 3 based nanomaterials are summarized. Advanced synthesis and characterization methods and theoreticalmodelingwere combined to assess and reduce ZT-limiting mechanisms in these materials.

36 MATERIALS SCIENCE↗

Comprehensive Report on Design and Development of a 100-kW DSSRM

Switched reluctance machines (SRMs) are low cost and fault tolerant alternatives for traction applications. Due to their relatively low torque density and high torque ripple, these machines have not been used in commercialized electrified power trains yet. The double-stator magnetic configuration, where a segmental rotor shared between two stators, is proven to have superior torque density, lower acoustic noise, and torque pulsation. The double-stator SRM (DSSRM) has a high potential of being the next generation of traction motors since it combines the advantages of permanent magnet-free machines, such as low cost and independence from supply chain issues associated with rare metals, while providing high torque and power densities. In this paper, we introduce the complete design process of a 100-kW DSSRM including electromagnetic, structural, thermal, and system level design. The performance of the developed DSSRM is verified with the experimental data. This paper presents overall study of DSSRM and describes merits of DSSRM drive system.

42 ENGINEERING↗

Inertia-Wheel Vibration-Damping System

Proposed electromechanical system would damp vibrations in large, flexible structure. In active vibration-damping system motors and reaction wheels at tips of appendages apply reaction torques in response to signals from accelerometers. Velocity signal for vibrations about one axis processes into control signal to oppose each of n vibrational modes. Various modes suppressed one at a time. Intended primarily for use in spacecraft that has large, flexible solar panels and science-instrument truss assembly, embodies principle of control interesting in its own right and adaptable to terrestrial structures, vehicles, and instrument platforms.

Fedor, Joseph V.↗

An Experimental and Theoretical Study of the Valence Shell Electronic Structure of Nitromethane

Vibrationally resolved CH 3 NO 2 and CD 3 NO 2 photoelectron spectra and angular distribution parameters, β, have been measured in the photon energy range 20–80 eV. This allows a comprehensive investigation of conflicting literature interpretations of the two outermost photoelectron bands, complemented by high-level calculations characterizing the three O lone-pair-based orbital ionizations expected in this region. Franck–Condon simulations allow the regular vibrational progressions observed at the beginning of the first and second bands to be assigned as predominantly modes v 5 and v 6 of the D 0 and D 2 cation states, respectively. Irregular structuring observed midband in both bands is attributed to avoided crossings between the adiabatic D 0 /D 1 and D 1 /D 2 states as identified in potential surface cuts taken along the v 5 and v 6 normal mode coordinates. The associated D 0 /D 1 and D 1 /D 2 conical intersections were located and characterized, allowing possible vibronic coupling and its impact on the photoelectron spectra of the D 0 , D 1 , and D 2 states to be discussed. This helps rationalize the apparently missing D 1 ionization in this region, although some contribution by this state may be identifiable in the β-parameter spectra. Theoretical analysis of the complete valence region spectrum identifies the early breakdown of the independent electron model beyond these first two bands.

Powis, Ivan [University of Nottingham (United King↗

Predictions of Boron Phase Stability Using an Efficient Bayesian Machine Learning Interatomic Potential

Thermodynamic phase stability of three elemental boron allotropes, i.e., α-B, β-B, and γ-B, was investigated using a Bayesian interatomic potential trained via a sparse Gaussian process (SGP). SGP potentials trained with datasets from on-the-fly active learning achieve quantum mechanical level accuracy when employed in molecular dynamics simulations to predict wide-ranging thermodynamic, structural, and vibrational properties. The simulated phase diagram (500~1400 K and 0~16 GPa) agrees with experimental measurements. The SGP-based MD simulations also successfully predicted that the B13 defect is critical in stabilizing β-B below 700 K. At higher temperatures, the entropy becomes the dominant factor, making β-B the more stable phase over α-B. Furthermore, this Letter demonstrates that SGP potentials based on a training set consisting of defect-free-only systems could make correct predictions of defect-related phenomena in solid-state crystals, paving the path to investigate crystal phase stability and transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced sensitivity to the time variation of the fine-structure constant and m{sub p}/m{sub e} in diatomic molecules: A closer examination of silicon monobromide

Recently it was pointed out that transition frequencies in certain diatomic molecules have an enhanced sensitivity to variations in the fine-structure constant {alpha} and the proton-to-electron mass ratio m{sub p}/m{sub e} due to a near cancellation between the fine structure and vibrational interval in a ground electronic multiplet [V. V. Flambaum and M. G. Kozlov, Phys. Rev. Lett. 99, 150801 (2007)]. One such molecule possessing this favorable quality is silicon monobromide. Here we take a closer examination of SiBr as a candidate for detecting variations in {alpha} and m{sub p}/m{sub e}. We analyze the rovibronic spectrum by employing the most accurate experimental data available in the literature and perform ab initio calculations to determine the precise dependence of the spectrum on variations in {alpha}. Furthermore, we calculate the natural linewidths of the rovibronic levels, which place a fundamental limit on the accuracy to which variations may be determined.

74 ATOMIC AND MOLECULAR PHYSICS↗

Vibrational Fermi Resonance in Atomically Thin Black Phosphorus

Fermi resonance is a phenomenon involving the hybridization of two coincidentally quasi-degenerate states that is observed in the vibrational or electronic spectra of molecules. Despite numerous examples in molecular systems, vibrational Fermi resonances in dispersive semiconducting systems remain largely unexplored due to the rarity of occurrence. Here we report a vibrational Fermi resonance in atomically thin black phosphorus. The Fermi resonance arises via anharmonic mixing of a fundamental Raman mode and a Davydov component of an infrared mode, leading to a doublet with mixed character. The extent of Fermi coupling can be modulated by the application of external biaxial strain. The consequences of Fermi hybridization are revealed by electronic resonance effects in the thickness-dependent and excitation-wavelength-dependent Raman spectrum, which is predicted by ab initio hybrid functional simulations including excitonic interactions. This work reveals new insight into electron–phonon coupling in black phosphorus and demonstrates a novel method for modulating Fermi resonances in 2D semiconductors.

74 ATOMIC AND MOLECULAR PHYSICS↗

Lattice Structure and Dynamics of Sparse Molecular Crystals: OsO 4 and RuO 4

OsO 4 and RuO 4 are molecular oxides with unique tetrameric structures and rare +8 oxidation states. Accurately modeling their properties remains challenging for density functional theory (DFT) due to weak intertetramer interactions, which standard functionals fail to capture. Here, in this work, we show that the van der Waals (vdW)-corrected density functional (vdW-DF-optB86b) provides structural parameters that are much closer to experimental values than the standard generalized gradient approximation, with volume predictions that fall within the experimentally observed range. Phonon band structure analysis shows that the inclusion of vdW interactions stabilizes soft phonon modes, highlighting the importance of dispersion corrections for accurate predictions of lattice dynamics. Experimental measurements of the phonon density of states for OsO 4 , obtained via inelastic neutron scattering, demonstrate good agreement with our vdW-DF-optB86b calculations. These results validate OsO 4 and RuO 4 as valuable benchmarks for structural and vibrational calculations via vdW-corrected DFT methods and offer insights for studying the broader class of sparse molecular materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Active Damping Using Distributed Anisotropic Actuators

A helicopter structure experiences substantial high-frequency mechanical excitation from powertrain components such as gearboxes and drive shafts. The resulting structure-borne vibration excites the windows which then radiate sound into the passenger cabin. In many cases the radiated sound power can be reduced by adding damping. This can be accomplished using passive or active approaches. Passive treatments such as constrained layer damping tend to reduce window transparency. Therefore this paper focuses on an active approach utilizing compact decentralized control units distributed around the perimeter of the window. Each control unit consists of a triangularly shaped piezoelectric actuator, a miniature accelerometer, and analog electronics. Earlier work has shown that this type of system can increase damping up to approximately 1 kHz. However at higher frequencies the mismatch between the distributed actuator and the point sensor caused control spillover. This paper describes new anisotropic actuators that can be used to improve the bandwidth of the control system. The anisotropic actuators are composed of piezoelectric material sandwiched between interdigitated electrodes, which enables the application of the electric field in a preferred in-plane direction. When shaped correctly the anisotropic actuators outperform traditional isotropic actuators by reducing the mismatch between the distributed actuator and point sensor at high frequencies. Testing performed on a Plexiglas panel, representative of a helicopter window, shows that the control units can increase damping at low frequencies. However high frequency performance was still limited due to the flexible boundary conditions present on the test structure.

Schiller, Noah H.↗

Mapping quadrupole collectivity in the Cd isotopes: The breakdown of harmonic vibrational motion

The stable Cd isotopes have long been used as paradigms for spherical vibrational motion. Extensive investigations with in-beam {gamma} spectroscopy have resulted in very-well-established level schemes, including many lifetimes or lifetime limits. A programme has been initiated to complement these studies with very-high-statistics {beta} decay using the 8{pi} spectrometer at the TRIUMF radioactive beam facility. The decays of {sup 112}In and {sup 112}Ag have been studied with an emphasis on the observation of, or the placement of stringent limits on, low-energy branches between potential multi-phonon levels. A lack of suitable 0{sup +} or 2{sup +} three-phonon candidates has been revealed. Further, the sum of the B(E2) strength from spin 0{sup +} and 2{sup +} states up to 3 MeV in excitation energy to the assigned two-phonon levels falls far short of the harmonic-vibrational expectations. This lack of strength points to the failing of collective models based on vibrational phonon structures.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Properties of reactive oxygen species by quantum Monte Carlo

The electronic properties of the oxygen molecule, in its singlet and triplet states, and of many small oxygen-containing radicals and anions have important roles in different fields of chemistry, biology, and atmospheric science. Nevertheless, the electronic structure of such species is a challenge for ab initio computational approaches because of the difficulties to correctly describe the statical and dynamical correlation effects in presence of one or more unpaired electrons. Only the highest-level quantum chemical approaches can yield reliable characterizations of their molecular properties, such as binding energies, equilibrium structures, molecular vibrations, charge distribution, and polarizabilities. In this work we use the variational Monte Carlo (VMC) and the lattice regularized Monte Carlo (LRDMC) methods to investigate the equilibrium geometries and molecular properties of oxygen and oxygen reactive species. Quantum Monte Carlo methods are used in combination with the Jastrow Antisymmetrized Geminal Power (JAGP) wave function ansatz, which has been recently shown to effectively describe the statical and dynamical correlation of different molecular systems. In particular, we have studied the oxygen molecule, the superoxide anion, the nitric oxide radical and anion, the hydroxyl and hydroperoxyl radicals and their corresponding anions, and the hydrotrioxyl radical. Overall, the methodology was able to correctly describe the geometrical and electronic properties of these systems, through compact but fully-optimised basis sets and with a computational cost which scales as N{sup 3} − N{sup 4}, where N is the number of electrons. This work is therefore opening the way to the accurate study of the energetics and of the reactivity of large and complex oxygen species by first principles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗