Search NASA⌕ Search

SEARCH · Search NASA

Results for “Yield Strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

FY16 Status Report on Development of Integrated EPP and SMT Design Methods

The goal of the Elastic-Perfectly Plastic (EPP) combined integrated creep-fatigue damage evaluation approach is to incorporate a Simplified Model Test (SMT) data based approach for creep-fatigue damage evaluation into the EPP methodology to avoid the separate evaluation of creep and fatigue damage and eliminate the requirement for stress classification in current methods; thus greatly simplifying evaluation of elevated temperature cyclic service. The EPP methodology is based on the idea that creep damage and strain accumulation can be bounded by a properly chosen “pseudo” yield strength used in an elastic-perfectly plastic analysis, thus avoiding the need for stress classification. The original SMT approach is based on the use of elastic analysis. The experimental data, cycles to failure, is correlated using the elastically calculated strain range in the test specimen and the corresponding component strain is also calculated elastically. The advantage of this approach is that it is no longer necessary to use the damage interaction, or D-diagram, because the damage due to the combined effects of creep and fatigue are accounted in the test data by means of a specimen that is designed to replicate or bound the stress and strain redistribution that occurs in actual components when loaded in the creep regime. The reference approach to combining the two methodologies and the corresponding uncertainties and validation plans are presented. Results from recent key feature tests are discussed to illustrate the applicability of the EPP methodology and the behavior of materials at elevated temperature when undergoing stress and strain redistribution due to plasticity and creep.

42 ENGINEERING↗

Experimental and Computational Investigation of High Entropy Alloys for Elevated-Temperature Applications

To create and design novel structural materials with enhanced creep-resistance, fundamental studies have been conducted on high-entropy alloys (HEAs), using (1) thermodynamic calculations, (2) mechanical tests, (3) neutron diffraction, (4) characterization techniques, and (5) crystal-plasticity finite-element modeling (CPFEM), to explore future candidates for next-generation power plants. All the constituent binary and ternary systems of the Al-Cr-Cu-Fe-Mn-Ni and Al-Co-Cr-Fe-Ni systems were thermodynamically modeled within the whole composition range. Comparisons between the calculated phase diagrams and literature data are in good agreement. Seven types of HEAs were fabricated from Al-Cr-Cu-Fe-Mn-Ni and Al-Co-Cr-Fe-Ni systems. The Al x CrCuFeMnNi HEAs have disordered [face-centered cubic (FCC) + body-centered cubic (BCC)] crystal structures, not FCC or BCC single structure. Excessive alloying of the Al element results in the change of both microstructural and mechanical properties in Al x CoCrFeNi HEAs. There are mainly three structural features in Al x CoCrFeNi: (1) the morphology, (2) the volume fractions of the constitute phases, and (3) existing temperatures of all six phases. After homogenization, the Al 0.3 CoCrFeNi material is a pure FCC solid solution. After aging at 700 °C for 500 hours, the optimal microstructure combinations, the FCC matrix, needle-like B2 phase within grains, and granular σ phase along grain boundary, is achieved for Al 0.3 CoCrFeNi. The cold-rolling process is utilized to reduce the grain size of Al 0.1 CoCrFeNi and Al 0.3 CoCrFeNi. The chemical elemental partitioning of FCC, BCC, B2, and σphases at different temperatures, before and after mechanical tests, in Al-Cr-Cu-Fe-Mn-Ni and Al-Co-Cr-Fe-Ni systems are quantitatively characterized by both synchrotron X-ray diffraction, neutron diffraction with levitation, scanning electron microscopy (SEM), advanced atom probe tomography (APT), and transmission electron microscopy (TEM). In-situ neutron diffraction experiments were conducted to study the strengthening effect of B2 phase on tensile properties of Al 0.3 CoCrFeNi HEAs directly. The results shows the creep behavior of Al 0.3 CoCrFeNi is superior to conventional alloys, and the heat treatment introduces secondary B2 phase into the FCC matrix, which increase the yielding strength, decrease the ductility, diminish the serrated flow during compression tests at high temperatures. In summary, the outcomes of the development of the HEAs with creep resistance include: (1) Suitable candidates, for the application to boilers and steam and gas turbines at temperatures above 760 °C and a stress of 35 MPa. (2) Fundamental understanding on the precipitate stability and deformation mechanisms of both single-phase and precipitate-strengthened alloys at room and elevated temperatures, and (3) The demonstration of an integrated approach, coupling modeling [thermodynamic calculations and crystal-plasticity finite-element modeling (CPFEM)] and focused experiments, to identify HEAs that outperform conventional alloys for high-temperature applications, which will be applicable for the discovery and development of other high-temperature materials in the power-generating industry.

36 MATERIALS SCIENCE↗

2016 Accomplishments. Tritium aging studies on stainless steel. Forging process effects on the fracture toughness properties of tritium-precharged stainless steel

Forged austenitic stainless steels are used as the materials of construction for pressure vessels designed to contain tritium at high pressure. These steels are highly resistant to tritium-assisted fracture but their resistance can depend on the details of the forging microstructure. During FY16, the effects of forging strain rate and deformation temperature on the fracture toughness properties of tritium-exposed-and-aged Type 304L stainless steel were studied. Forgings were produced from a single heat of steel using four types of production forging equipment – hydraulic press, mechanical press, screw press, and high-energy-rate forging (HERF). Each machine imparted a different nominal strain rate during the deformation. The objective of the study was to characterize the J-Integral fracture toughness properties as a function of the industrial strain rate and temperature. The second objective was to measure the effects of tritium and decay helium on toughness. Tritium and decay helium effects were measured by thermally precharging the as-forged specimens with tritium gas at 34.5 MPa and 350°C and aging for up to five years at -80°C to build-in decay helium prior to testing. The results of this study show that the fracture toughness properties of the as-forged steels vary with forging strain rate and forging temperature. The effect is largely due to yield strength as the higher-strength forgings had the lower toughness values. For non-charged specimens, fracture toughness properties were improved by forging at 871°C versus 816°C and Screw-Press forgings tended to have lower fracture toughness values than the other forgings. Tritium exposures reduced the fracture toughness values remarkably to fracture toughness values averaging 10-20% of as-forged values. However, forging strain rate and temperature had little or no effect on the fracture toughness after tritium precharging and aging. The result was confirmed by fractography which indicated that fracture modes in the tritium-exposed specimens were similar for all forgings. Another FY16 objective was to prepare fracture toughness specimens from Types 304L and 21-6-9 stainless steel weldments and heat-affected zones (HAZ) for tritium charging.

36 MATERIALS SCIENCE↗

2017 Status report-Tritium aging studies on stainless steel: Effect of hydrogen, tritium and decay helium on the fracture-toughness properties of stem, cup and block forgings

The materials of construction of tritium reservoirs are forged stainless steels. During service, the structural properties of the stainless steel change over time because of the diffusion of tritium into the reservoir wall and its radioactive decay to helium-3. This aging effect can cause cracks to initiate and grow which could result in a tritium leak or delayed failure of a tritium reservoir. Numerous factors affect the tendency for crack formation and propagation and are being investigated in this program. The goal of the research is to provide relevant fracture mechanics data that can be used by the design agencies in their assessments of tritium reservoir structural integrity. In this status report, new experimental results are presented on the effects of tritium and decay helium on the cracking properties of specimens taken from actual tritium reservoir forgings instead of the experimental forgings of past programs. The properties measured are more representative of actual reservoir properties because the microstructure of the specimens tested are more like that of the actual tritium reservoirs. The program was designed to measure the effects of material variables on tritium compatibility and includes two stainless steels (Type 304L and 316L stainless steel), multiple yield strengths (360-500 MPa), and multiple forging shapes (Stem, Cup, and Block).

36 MATERIALS SCIENCE↗

Gas Release as a Deformation Signal

Radiogenic noble gases are contained in crustal rock at inter and intra granular sites. The gas composition depends on lithology, geologic history, fluid phases, and the aging effect by decay of U, Th, and K. The isotopic signature of noble gases found in rocks is vastly different than that of the atmosphere which is contributed by a variety of sources. When rock is subjected to stress conditions exceeding about half its yield strength, micro-cracks begin to form. As rock deformation progresses a fracture network evolves, releasing trapped noble gases and changing the transport properties to gas migration. Thus, changes in gas emanation and noble gas composition from rocks could be used to infer changes in stress-state and deformation. The purpose of this study has been to evaluate the effect of deformation/strain rate upon noble gas release. Four triaxial experiments were attempted for a strain rate range of %7E10-8 /s (180,000s) to %7E 10-4/s (500s); the three fully successful experiments (at the faster strain rates) imply the following: (1) helium is measurably released for all strain rates during deformation, this release is in amounts 1-2 orders of magnitude greater than that present in the air, and (2) helium gas release increases with decreasing strain rate.

58 GEOSCIENCES↗

Equation of State and Damage in Polyethylene

The dynamic response of polymers differs significantly from those of metals, upon which many of the National Laboratories' deformation, damage, and failure models are based. Their moduli, yield strength, and damage characteristics are highly strain rate-, temperature-, and phase-dependent, requiring models that encompass a wide range of phenomena including some not in equilibrium. Recently, Los Alamos developed the Glassy Amorphous Polymer (GAP) 1 model [1] to address limitations in existing models of polymer deformation. GAP captures both volumetric (equation of state) and deviatoric (shear) response, including a non-equilibrium component to the former (a feature determined to be crucial in capturing the low-pressure, viscoelastic response to impact loading). GAP has already been applied to polymers such as PMMA, PTFE, epoxy, and Kel-F 800, but with an emphasis on impact response as opposed to damage or failure. The current effort was launched to address this gap in predictive capability. For reasons that will be made clear, semi-crystalline polyethylene (PE) was chosen to serve as a model system for parameterization and validation. PE (-C 2 H 4- )n is one of the most widely used polymers in industrial and engineering contexts, chiey due to the versatility of its mechanical response. This response can be tuned through network and chain structure, degree of crystallinity, and molecular weight. PE is found in several forms including low density (LDPE), high density (HDPE), and ultra-high molecular weight (UHMWPE). The focus here was on HDPE and UHMWPE, of pedigree described in the following section. Materials were well-characterized prior to study and are representative of semi-crystalline polymers of interest to DOE and DoD. Semi-crystalline PE undergoes a glass transition at low temperature (-35°C) and melts across a range of moderate temperatures (~80-180°C), depending on its structure. It is typically inert chemically, has low strength and high ductility, and the high strength and anisotropy of UHMWPE ber, in particular, have driven its use in engineering, impact, and armor applications. Surprisingly little is known, however, about the influence of PE's crystalline structure and associated phase transitions (including melt) on its response to dynamic compression. A broad suite of experiments was used to calibrate the GAP model for HDPE and UHMWPE. Section IV examines the effects of tensile strain on the structure and integrity of PE crystalline domains. These data were used to inform the preliminary damage model described in Section XII, whose roots lie in statistical physics and network theory. The viscoelastic and plastic components of GAP rely heavily on the stress-strain data of Section VI, which also include dynamic extrusion and Taylor anvil experiments used to validate the damage model. The thermal data of Section X provide crucial inputs to the equilibrium EOS in GAP, as well as the much broader range SESAME EOS whose construction is outlined in Section XI. Section VII details plate impact experiments characterizing the low-pressure shock locus and failure (spall) using in situ electromagnetic gauges. A previously reported \cusp" in the principal Hugoniot near 0.5 kbar was confirmed, and a multi-wave structure was observed over a limited input stress range above the cusp. This cusp is believed due to solid-solid phase transitions associated with the crystalline domains of the polymer.

36 MATERIALS SCIENCE↗

Historical Review of Stress Corrosion Cracking in Concentrated Uranium-Molybdenum Alloys

This report presents a historical overview of stress corrosion cracking (SCC) in uranium-molybdenum alloys, focusing primarily on U-10 wt. pct. Mo (U-10Mo). This alloy has been chosen as the high density uranium monolithic fuel for converting research reactors from high enriched uranium (HEU) to low enriched uranium (LEU) fuel for its combination of fuel density and gamma phase stability. One disadvantage of U-10Mo is its propensity towards stress corrosion cracking (SCC), driven by high residual stresses resulting from its high yield strength. This report contains a metallurgical overview of U-10Mo alloys incorporating processing, microstructural evolution, and mechanical properties. This report also summarizes SCC literature including contributing factors, initiation and propagation, the mechanism responsible for U-10Mo SCC, and possible solutions to the problem. A brief synopsis of interviews with key personnel from several Department of Energy (DOE) facilities and BWX Technologies (BWXT) is also included. Recommendations for future studies are outlined.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Nanoindentation Characterization of FeCrAl C26M tubes

The present report summarizes the nanoindentation characterization of a FeCrAl alloy, C26M in both tube and bar form. Microstructural analysis on the tube using electron backscatter diffraction showed a textured system with the cross-section favoring orie ntations near the [110] and the tube surface near the [111]. The bar cross-section showed a texture with orientation favoring those near the [100]. A large amount of in-grain misorientation was observed in the tube specimen with very little in the bar, indicating cold-work from tube processing steps. Nanoindentation with a Berkovich tip measured a similar modulus for all specimens of ~220 GPa. The bar specimens had a hardness of ~3.9 GPa, significantly lower than the 4.8 GPa and 5.2 GPa for the tube cross-section and surface, respectively. Spherical nanoindentation was performed on all specimens and orientations. Indentation with a 100 μm tip resulted in a measured modulus value of ~220 GPa for all specimens, in agreement with the Berkovich indentation results. The nanoindentation yield strength for the bar was found to be ~0.8 - 0.9 GPa, nearly 0.5 GPa less than the C26M tube.

36 MATERIALS SCIENCE↗

Nanoindentation Analysis of Ion Irradiated FeCrAl C26M

The present report summarizes the irradiation hardening behavior of two FeCrAl alloys, C26M and B126Y, irradiated up to a damage level of 16 dpa. Nanoindentation values were averaged between a depth of 100 and 200 nm in order to capture the irradiated region only. At the highest damage level, C26M was measured to harden by 1.62 GPa with little change in the modulus. B126Y showed a change in hardness of up to 2.52 GPa, reaching a similar hardness to the C26M. To more accurately compare with the unirradiated material where the influence of indentation size effects may operate more strongly, the Nix-Gao model was used to calculate the hardness at infinite depth, H0, and the length scale term, h*. The change in hardness with this model was found to be lower for both C26M and B126Y. The length scale term decreased with increasing dose up to 4 dpa and then deviated from expectation with a significant i ncrease at 16 dpa for both specimens. Spherical nanoindentation was performed on all specimens. A 5 μm tip was used to ensure the yield point occurred in the irradiated region. While the results from this testing are not as conclusive at doses less than 4 dpa, the nanoindentation yield strength showed similar trends with the nanoindentation hardness data.

36 MATERIALS SCIENCE↗

Dynamic Tensile Characterization of Hiperco 50A Alloy at Various Strain Rates and Temperatures

Soft ferromagnetic alloys are often utilized in electromagnetic applications due to their desirable magnetic properties. In support of these applications, the ferromagnetic alloys are also desired to bear mechanical load at various environmental temperatures. In this study, a Permendur 2V alloy manufactured by Metalwerks Inc. (but referred to Hiperco 50A, a trademark of Carpenter Technologies Inc.) was dynamically characterized in tension with a Kolsky tension bar and a Dropkinson bar at various strain rates and temperatures. Dynamic tensile stress-strain curves of the Hiperco 50A alloy were obtained at the strain rates ranging from 40 to 230 s -1 and temperatures from -100 to 100°C. All tensile stress-strain curves exhibited an initial linear elastic response to an upper yield followed by a Eiders banding response and then a nearly linear work-hardening behavior. The yield strength of this material was found to be sensitive to both strain rate and temperature; whereas, the hardening rate was independent of strain rate or temperature. The Hiperco 50A alloy exhibited a feature of brittle fracture in tension under dynamic loading with no necking being observed.

36 MATERIALS SCIENCE↗

Numerical Simulations of Cratering Effects in Adobe

This paper outlines a new simplified approach to developing a material model for adobe. The approach is to fit the equation of state (EOS) using a Mie-Gruneisen (MGR) analytical model with a P-Alpha compaction law, and to fit the pressure-dependent yield surface with the Geological Yield Surface (GEO) modeled in CTH using well characterized adobe. By identifying key parameters that governed material response, this simplified modeling approach aimed to increase the understanding of the shock compaction and compression behavior of adobe. The new simplified model for adobe represented in this paper replicated the features of past experimental penetration data. At low velocities the penetration behavior of steel spheres into adobe is captured by Stokes law, where the drag coefficient is inversely proportional to the Reynolds number. Each inherently different adobe material investigated had a separate linear region with the slope equal to the inverse of the coefficient of drag multiplied by impact velocity. A transition region following the Stokes region was identified in each adobe material, where the penetration depth was constant with increasing impact velocity. This penetration depth limit was shown to be dependent upon the yield strength of the adobe and inversely proportional to the initial density. Finally, examining the sensitivity of the penetration depth to the key model parameters, the material model for adobe was adjusted to provide the best fit to the experimental penetration data. In addition, a simplified water content, or initial saturation of the adobe, was introduced as another relevant parameter to characterize the response. Using this simple material model for adobe, validated with experimental penetration data, the response of adobe targets to hypervelocity impact of a variety of projectile types can be reliably predicted.

36 MATERIALS SCIENCE↗

SNL/SRNL Joint Project on degradation of mechanical properties in structural metals and welds for GTS reservoirs

The objective of this project is to measure the hydrogen-affected fracture properties of structural welded metals exposed to hydrogen isotopes. The main goal of FY16 was to evaluate low-temperature effects on fracture properties of stainless steel welds pre-charged with hydrogen. Forged stainless steels consisting of 316L, 304L, and 21-6-9 welded with 308L filler metal were pre-charged and tested at 223 K at select displacement rates to evaluate fracture behavior over the lower STS temperature range. Reductions in fracture thresholds were observed for all stainless steel welds when samples were precharged with hydrogen; however, temperature effects were not observed in the 304L and 21-6-9 welds. Only 316L exhibited enhanced degradation at 223 K. In addition to fracture testing, tensile specimens were extracted from the weld region and tested at 296 K and 223 K in the hydrogen pre-charged condition. A slight increase in yield strength was measured in the pre-charged condition at 296K and 223 K for the three different welds. A reduction in total elongation of 3-11% was observed at 296 K, whereas reductions in total elongation from 50-64% were observed at 223 K. Microhardness and ferrite numbers were measured in the weld regions to try to elucidate the factors affecting fracture. Lastly, in collaboration with Savannah River National Laboratory (SRNL), weld and heat-affected zone bend specimens extracted from forged 304L and 21-6-9 stainless steel were supplied to SRNL and are in the final stages of sample preparation for subsequent tritium exposure, aging, and fracture testing. The collection of testing completed and planned between Sandia and SRNL contributes to the development of a comprehensive database of properties for materials as a function of hydrogen-isotope concentrations.

36 MATERIALS SCIENCE↗

Microstructural and Micromechanical Characterization of FeCrAl C26M tubes

The present report summarizes the nanoindentation characterization of a FeCrAl alloy, C26M in both tube and bar form. The current heat, AC2-B, investigated by electron backscatter diffraction showed a textured system with the cross-section favoring orientations near the [110] and the tube surface near the [111], similar to previous heats of C26M. Nanoindentation with a Berkovich tip measured a similar moduli and hardness for all specimens of ~220 GPa and ~5 GPa, respectively. Spherical nanoindentation was performed on all specimens and orientations. Indentation with a 100 μm tip resulted in a measured moduli and yield strength values of ~215 GPa and ~1.5 GPa for all specimens, respectively, and in agreement with the Berkovich indentation results. Mesoscale tensile bars were laser cut out of a thin piece of AC2-B. Initial tensile testing showed that a minimum gauge thickness/width of 0.05 mm is required to approach more bulk-like conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Comparison of mechanical testing across micro- and meso- length scales

The present report summarizes the results from a variety of tests performed across different lengths scales used to evaluate the mechanical properties of a FeCrAl C26M weld. A variety of microscale and mesoscale mechanical tests were performed to evaluate a range of properties including nanoindentation hardness, compression and shear yield strengths, tensile strengths, and elongation. Using the mesoscale tensile testing as a baseline for comparison, micropillar compression was found to be the most sensitive to microstructural changes in the weld. Nanoindentation hardness testing, being high throughput, is recommended as a first step to identify major changes in the system and if residual stress is present.

36 MATERIALS SCIENCE↗

Adiabatic Heating in Modular Plasticity Models

Plastic deformations in metals are dissipative. Some fraction of the dissipated mechanical energy (plastic work) is converted into thermal energy and serves as a heat source. In cases where the heat cannot be readily transferred to the environment, the local temperature will increase thereby producing variations in mechanical behaviors associated with temperature-dependent properties (e.g. thermal softening due to decreasing yield strengths). This issue is often referred to as "adiabatic heating as an adiabatic temperature condition corresponds to the limiting case where no heat transfer takes place. The impact of converting plastic work into heat on the mechanical response of metals has been long studied. Nonetheless, it still remains an issue. For instance, with respect to ductile failure, the second Sandia Fracture Challenge noted that accounting for plastic heat generation was necessary for predictions under dynamic loading conditions. Furthermore, both experimental and modeling efforts continue to be pursued to better describe and understand the effect of plastic work conversion into heat on structural responses. Noting the need for capturing plastic work conversion into heat in structural analyses, a simple and fairly traditional representation of these responses has been added into existing modular plasticity models in the Library of Advanced Materials for Engineering (LAME). Here, these capabilities are briefly described with the underlying theory and numerical implementation discussed in Sections 2 and 3, respectively. Examples of syntax are given in Section 4 and some verification exercises are found in Section 5. Simple structural analyses are presented in Section 6 to briefly highlight the impact of these features and concluding thoughts are given.

36 MATERIALS SCIENCE↗

Oak Ridge National Laboratory Technical Input for the Nuclear Regulatory Commission Review of the 2017 Edition of ASME Section III, Division 5, ‘High Temperature Reactors’

To assist the Nuclear Regulatory Commission in its decision making on endorsement of the American Society for Mechanical Engineers Boiler and Pressure Vessel Code Section III, Division 5 (2017 Edition) for development of advanced non-light water reactors, the following Division 5 portions were reviewed: Article HBB-2000 Material; Article HCB-2000 Material; Article HGB-2000 Material; Mandatory Appendix HBB-I-14 Tables and Figures; and, Nonmandatory Appendix HBB-U Guidelines for Restricted Material Specifications to Improve Performance in Certain Service Applications. In addition to the 2017 Edition, the same parts of the 2019 Edition have also been reviewed as indicated in various sections of the report. This review was conducted by a collaboration of national laboratory and private sector participants with significant industrial experience, including some heavy lifting and deep diving from Clarus Consulting, LLC., all intended to achieve an objective, independent, and practical perspective. The report provides recommendations, descriptions of the evaluation methods, and the source references for the data used. To build confidence required for endorsement of the Code, this review was conducted as a verification and validation of the above Code contents. The objective of verification is to ensure that the Code is free of error – direct or implied; contains the information needed for its use, including proper coverage of the Code-specified materials for the intended application, and completeness and adequacy of references to other portions of the Code. The objective of validation is to authenticate that the Code tabulations and graphs represent design inputs consistent with what are determined using rules and methods specified by the Code. The authentication process used data that were assembled and/or generated independent of Code development, while the methods of analysis followed Code-specified methods where appropriate. The designated portions for this review cover the five alloys codified for high temperature reactor applications in Division 5, i.e. 316 SS, 304 SS, 800H, 2¼Cr-1Mo, and 9Cr-1Mo-V, regarding their general requirements, permitted specifications and design stress intensity values for pressure-retaining applications, deterioration in service, fatigue acceptance test, permissible weld materials, tensile and yield strength, expected minimum stress-to-rupture values (including for Alloy 718), weld stress rupture factors, permissible materials for bolting use, and restricted specifications in certain service applications. Additionally, stress intensity values for bolting materials including 316 SS, 304 SS and alloy 718 were reviewed. Analysis and discussion are also provided on contents outside of these designated Code portions where it was deemed relevant and necessary to develop a technically sound understanding of issues relating to the designated portions. Due to unavailability of sufficient test data on welds during the review period, the weld stress rupture factors in Tables HBB-I-10.14A to E, which cover a total of ten tables for the five alloys welded with twenty-eight different weld metals (some with similar properties), have been deferred to a future review effort. The review identified mainly two types of issues. The first type includes instances where the Code is found factually incomplete or incorrect, such as obsolete materials specifications listings, missing tabulation of stresses for bolting. Changes to the Code are recommended in these cases. The second type of issue includes instances where the Code tabulations and graphs are found to be less conservative than the review analysis results. In these cases, recommendations are made for further review and consideration where the difference in conservatism exceeds 10%, which is our threshold for questioning technical adequacy, meriting a risk assessment by the Nuclear Regulatory Commission and/or reactor designers. It is noted that this effort has been executed using all available data and established methods of analysis, including methods and criteria specified and used by the Code. As such, the findings that are presented in quantitative detail, in a format for convenient comparison with the Code, and with identification of where further review is recommended, should provide a sound technical basis for decisions about quantifying the implications of the reduced design margins and technical adequacy/inadequacy to form a basis for conditioning specific Code tabulation values on endorsement. Recommendations for specific changes to the Code, however, entail design conservatism considerations beyond the scope of this review effort, and are not made in this report.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Impact Response of Cold Spray Deposited Materials

Solid-state cold spraying (CS) of metals and respective blends is becoming increasingly attractive compared to conventional high temperature processes due to the unique properties such as increased yield strength, low ductility, and differences in tensile and compressive strengths that result from microstructural features due to the CS process. Here we report the results of plate impact experiments applied to CS deposits of tantalum (Ta), niobium (Nb), and a tantalum- niobium blend (TaNb). These methods allowed for definition of the Hugoniot for each material type and allowed for assessment of the Hugoniot Elastic Limit (HEL). Scanning electron microscopy was used on recovered samples to characterize the fracture mechanism during spallation.

36 MATERIALS SCIENCE↗

Feedstock Modification for Enhanced Additive Alloys

This project investigated the use of Y 2 O 3 nanoparticles to enhance IN625 feedstock for metal additive manufacturing. The oxide nanoparticles are adhered to the outer surface of the pre-alloyed IN625 powder feedstock, and serve to form an oxide dispersion strengthened (ODS) material in situ during processing. The conventional and enhanced feedstocks were processed using a laser powder bed fusion additive manufacturing (AM) system. The properties of the AM materials were characterized at elevated temperatures and compared to conventional wrought material. The addition of the Y 2 O 3 nanoparticles improved the yield strength, stress rupture, and corrosion properties of the AM material, and compared more favorably with conventional wrought IN625. This research will enable future adoption of additively manufactured ODS-IN625 components with superior properties to current printed IN625 material.

36 MATERIALS SCIENCE↗