Behavior of iodate substituted ettringite during aqueous leaching
Not Available
Avalos, Nancy M. (ORCID:0000000180734642)↗
SEARCH · Search NASA
Results for “alkalinity”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Tailoring biogenic straw insulation from additive manufacturing
In the pursuit of carbon-storing materials that could help accomplish high levels of building sustainability, wheat straw has emerged as a promising alternative to fossil fuel-based building materials. Straw is 100% biodegradable and abundant agricultural waste used in the construction 400 years ago, and it has been reported to have the lowest embodied carbon when measured against other typical insulating materials. Here, in this study, we report additive manufacturing of carbon-sequestration insulation panel materials by upcycling cellulose fibrils from wheat straw. Cellulose obtained from alkaline and 2,2,6,6-tetramethylpiperidine-1-oxyl radical-mediated oxidation shows thermal conductivity of 0.036 W m -1 K -1 , alongside elastic and flexural modulus of 900 MPa and 502 MPa, respectively. In addition, an in-situ hydrophobic treatment in the cellulose-based insulation panels is achieved with an average water contact angle of 133.7° Furthermore, the extrusion-based additive manufacturing of a 3D-printable ink obtained by mixing the cellulose and silica aerogel precursor is accomplished, with the printed material exhibiting structural integrity, thus showing great potential towards the development of state-of-the-art, sustainable materials for carbon-sequestration building applications.
36 MATERIALS SCIENCE↗
Direct root contact among neighboring plants influences activity of soil extracellular enzymes
Composition and diversity of vegetation systems can influence soil microbial activity and extracellular enzyme (EE) dynamics, which are crucial for soil carbon (C) accrual and nutrient cycling. Yet, the impact of plant interactions and competition on EE activities remains a notable knowledge gap. This study examines how direct root contact and neighboring plant identity affect the activity and spatial distribution of four key soil EEs: β-glucosidase (BGlu), chitinase, acid phosphatase (AcidP), and alkaline phosphatase (AlkP). Using three-compartment rhizoboxes with switchgrass (Panicum virgatum L.) grown alongside bush clover (Lespedeza capitata Michx.), and black-eyed Susan (Rudbeckia hirta L.), we assessed enzyme activities using zymography under conditions that either allowed or restricted direct root contact by root barriers. Results show that root proliferation and species interactions significantly influenced EE activity. While BGlu and AcidP activities were strongly correlated with root biomass, AlkP activity was consistently higher in the absence of root barriers, indicating a pronounced microbial response to plant interactions via direct/close root contacts. Additionally, soil phosphorus availability modulated enzyme activity, with higher phosphatase activities in low-P soils. Furthermore, these findings highlight the importance of root-root interactions and plant species composition in shaping soil biochemical processes.
enyzme activity↗
Origins of wear-induced tungsten corrosion defects in semiconductor manufacturing during tungsten chemical mechanical polishing
During chemical mechanical polishing (CMP) process optimization, a unique corrosion defect was identified in the tungsten (W) contact plugs, which were investigated to develop practical solutions to improve CMP mass productivity. The corrosion defect occurred in the absence of external incident energy and was observed to occur only at the W plugs connected to the P + /n-well close to the wafer edge. To examine the root cause of the corrosion, a series of experiments was carried out at each W CMP step, using in-line defect inspection. Additional experiments were conducted using on-line inductively coupled plasma mass spectrometry (ICP-MS) to understand pH- and potential-dependent electrochemical dissolution behaviors of W. Experimentally, W corrosion was confirmed to be exacerbated if the surface oxide of the W plugs is removed by the deionized water (DIW) rinsing step under wafer pressurization, then exposed to DIW and alkaline cleaning solution. Although the DIW rinsing step is commonly performed to clean polishing pads right after the main polishing, a small amount of applied pressure (0.5 psi) without slurry supply can lead to corrosion defects. Finally, this wear-induced corrosion of the W plugs can be prevented by removing the applied pressure during the post DIW rinsing step of W CMP.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Tracking the prelude of the electroreduction of carbon monoxide via its interaction with Cu(100): Studies by operando scanning tunneling microscopy and infrared spectroscopy
The first isolable intermediate in the electrochemical reduction of carbon dioxide is carbon monoxide. This species, or its hydrated form, formic acid, is also the primary end product from all but a handful of metallic electrodes; with the latter, hydrogen gas is generated, but it emanates from the reduction of water and not from CO 2 . Only one electrode material, zerovalent copper, can spawn, in greater-than-trace quantities, a variety of species that are more highly reduced than CO. Hence, if the aim is to pursue a reaction trail of the reduction of CO 2 to products other than CO, it would be both logical and expedient to track the electrocatalytic reaction of CO itself. Heterogeneous electrocatalysis is a surface phenomenon; it transpires only when the reactant, CO in this case, chemisorbs on, or chemically interacts with, the Cu electrode surface. There is no electrocatalytic reaction if there is no CO adsorption. In ultrahigh vacuum, no CO resides on the Cu(100) surface at temperatures higher than 200 K. However, under electrochemical conditions, CO is chemisorbed on Cu at ambient temperatures at a given potential. Here, we thus paired, in seriatim fashion, scanning tunneling microscopy (STM) and polarization-modulation IR reflection-absorption spectroscopy (PMIRS) to document the influence of applied potential on the coverage, the molecular orientation, and the adlattice structure of CO adsorbed on Cu(100) in alkaline solutions; the results are described in this paper.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Cement and concrete as carbon sinks: Transforming a climate challenge into a carbon storage opportunity
Cement and concrete, while traditionally recognized as the main contributors to anthropogenic CO 2 emissions, also have untapped capacity to serve as substantial and scalable carbon sinks. This perspective examines how engineered mineral carbonation can transform cement-based materials into functional carbon storage systems, generating both environmental and economic value. We review the fundamental mechanisms of CO 2 uptake in cementitious systems, highlighting current limitations in reaction kinetics, phase control, and durability under varying environmental conditions. Emphasis is placed on the utilization of alkaline industrial residues and emerging magnesium-based cements, which offer synergistic pathways for carbon sequestration and circular resource use. We further assess the performance trade-offs associated with CO 2 uptake and the feasibility of deploying these technologies on industrial scales. A strategic roadmap is proposed that integrates scientific innovation, regulatory alignment, and carbon accounting in the life cycle to accelerate the adoption of carbon-storing concrete. This perspective provides a comprehensive framework to advance cement and concrete as engineered carbon sinks and supports the transition to a climate-positive construction industry.
Carbon storage↗
Pretreatments for the continuous production of pyrolytic sugar from lignocellulosic biomass
Fast pyrolysis of lignocellulosic biomass yields little sugar or anhydrosugars compared to pyrolysis of pure polysaccharides because naturally abundant alkali and alkaline earth metals (AAEM) in biomass catalyze the fragmentation of pyranose and furanose rings. Sugar yields can be increased dramatically by pretreating the biomass with sulfuric acid prior to pyrolysis, which passivates the catalytic activity of the metals by converting them into thermally stable salts. However, depolymerization of lignin in biomass also depends on the catalytic activity of AAEM. Thus, passivating AAEM has the unintended consequence of slowing the rate of depolymerization and volatilization of lignin, resulting in a transient melt phase that agglomerates and can foul pyrolysis reactors. Here, to overcome this problem, various non-alkali metal sulfates were tested as replacements for sulfuric acid. Iron in the form of ferrous sulfate proved the most effective in depolymerizing lignin without fragmenting pyranose rings. Conventional nitrogen-blown pyrolysis of ferrous sulfate pretreated corn stover achieved WHSV of 4 h –1 compared to only 0.6 h –1 for acid pretreated corn stover. Autothermal (air-blown) pyrolysis of ferrous sulfate pretreated corn stover showed even more dramatic improvement, increasing WHSV from 1 h –1 to 10 h –1 compared to acid pretreated corn stover under autothermal operation. Fermentable sugar yields from the pyrolysis of corn stover increased from 0.9 wt% to 11.8 wt% on a biomass basis, a 13-fold increase as a result of the ferrous sulfate pretreatment. These advantages combine to increase volumetric sugar productivity from 62 g L –1 h –1 for conventional pyrolysis of untreated corn stover to 2041 g L –1 h –1 for autothermal pyrolysis of ferrous sulfate treated corn stover.
09 BIOMASS FUELS↗
Enhancing durability and activity toward oxygen evolution reaction using single-site Re-doped NiFeO x catalysts at ampere-level
NiFeO x materials are known as among the most active catalysts toward oxygen evolution reaction (OER) for hydrogen generation in alkaline media. Nevertheless, the long-term durability of NiFeO x catalysts for OER is still too far to the industrial application. Herein, we prepared a NiFeReO x catalyst with single-site Re dopants and observed that the single-site Re dopants could significantly enhance the durability without compromising the activity. A cell voltage of 1.82 V without iR correction is noted at the current density of 3000 mA cm –2 in anion-exchange membrane water electrolyzer (AEMWE) with NiFeReO x catalyst, and a very small degradation is observed under 2000 and 1000 mA cm –2 , which remarkably outperforms the pristine NiFeO x . Additionally, the overpotential of 305 mV at 10 mA cm –2 is achieved with the NiFeReO x catalyst, which is lower than 50 mV compared with the pristine NiFeO x catalyst, together with a smaller Tafel slope of 54.3 mV dec -1 . The boosted OER durability and activity of the NiFeReO x catalyst could be attributed to the strong electron-withdrawing property of Re 7+ single atoms leading to the electronic structure optimization and stabilization of Ni/Fe active sites. Our insights propose a new path for designing NiFeO x catalysts with high durability and activity toward OER.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Calcium nitrate: A chemical admixture to inhibit aggregate dissolution and mitigate expansion caused by alkali-silica reaction
Alkali-silica reaction (ASR) is a significant cause of the degradation of concrete structures. ASR results from the dissolution of reactive silicate aggregates and the subsequent formation of damaging, expansive ASR gels. Despite the prevalence of ASR, so far only lithium-based chemical admixtures have been shown to be successful in mitigating its deleterious effects. Herein, dissolved calcium nitrate (Ca(NO 3 ) 2 : CN) is demonstrated to reduce ASR-induced expansion caused by the use of sodium borosilicate (NBS) glass as a model reactive aggregate. The significance of reductions of NBS-glass dissolution and mortar-bar expansion rates is discussed, with special focus on highlighting the mechanism by which calcium nitrate mitigates ASR, i.e., by the inhibition of aggregate dissolution. This study reveals a new and cost-effective pathway to suppress aggregate dissolution and ASR in concrete based on the dosage of soluble alkaline-earth additives.
36 MATERIALS SCIENCE↗
Enhanced pozzolanic reactivity in hydrogen-form zeolites as supplementary cementitious materials
Pozzolans rich in silica and alumina react with lime to form cementing compounds and are incorporated into portland cement as supplementary cementitious materials (SCMs). However, pozzolanic reactions progress slower than portland cement hydration, limiting their use in modern construction due to insufficient early-age strength. Hence, alternative SCMs that enable faster pozzolanic reactions are necessary including synthetic zeolites, which have high surface areas and compositional purity that indicate the possibility of rapid pozzolanic reactivity. Synthetic zeolites with varying cation composition (Na-zeolite, H-zeolite), SiO 2 /Al 2 O 3 ratio, and framework type were evaluated for pozzolanic reactivity via Ca(OH) 2 consumption using ion exchange and in-situ X-ray diffraction experiments. Na-zeolites exhibited limited exchange reactions with KOH and Ca(OH) 2 due to the occupancy of acid sites by Na + and hydroxyl groups. Meanwhile, H-zeolites readily adsorbed K + and Ca 2+ from a hydroxide solution by exchanging cations with H + at Brønsted acid sites or cation adsorption at vacant acid sites. By adsorbing cations, the H-zeolite reduced the pH and increased Ca 2+ solubility to promote pozzolanic reactions in a system where Ca(OH) 2 dissolution/diffusion was a rate limiting factor. High H-zeolite reactivity resulted in 0.8 g of Ca(OH) 2 consumed per 1 g of zeolites after 16 h of reaction versus 0.4 g of Ca(OH) 2 consumed per 1 g of Na-zeolite. The H-zeolite modulated the pore fluid alkalinity and created a low-density amorphous silicate phase via mechanisms analogous to two-step C-S-H nucleation experiments. Finally, controlling these reaction mechanisms is key to developing next generation pozzolanic cementitious systems with comparable hydration rates to portland cement.
36 MATERIALS SCIENCE↗
Dissolution and initial hydration behavior of tricalcium aluminate in low activity sulfate solutions
Influences of alkali or alkaline earth sulfates on the hydration of cubic tricalcium aluminate (C 3 A) were evaluated by in situ dissolution rate measurements, by ex situ near-surface composition measurements with secondary ion mass spectrometry, and by in situ synchrotron X-ray diffraction to monitor precipitation of hydration products. Both slight reductions in dissolution rate and cation-specific interactions with the solid were observed. The near-surface Ca/Al ratio is significantly lower after some dissolution and the electrolyte cations are incorporated within the surface with different affinities (Mg 2+ > K + > Na + ). An interfacial dissolution-reprecipitation mechanism may explain the observations as well as, or better than, a simple cation exchange. The sulfate concentration in solution affects the rates of both C 3 A dissolution and precipitation of hydration products. Aditionally, sulfate ions likely adsorb at the hydrous Al-rich surface layer, thereby reducing the dissolution rate of aluminates and delaying the precipitation of aluminate hydration products.
36 MATERIALS SCIENCE↗
Carbon sequestration of steel slag and carbonation for activating RO phase
Carbonation of Ca/Mg minerals in industrial alkaline residues is a technology to sequester CO{sub 2} and reduce its emissions to the atmosphere. In this work, BSE-EDS were used to determine the mineral phase in steel slag; compositions of RO phase were identified and simulated. The carbon sequestration of steel slag was studied, and RO phase was activated by carbonation. Result shows that the amount of CO{sub 2} sequestered in steel slag and RO phase increases as carbonation time increases. Under autoclaving condition, the hydration ratio of MgO in RO phase was 20.10%. Through carbonation, up to 58.83% of MgO in RO phase can be converted into MgCO{sub 3}, and the activation of RO phase by carbonation was manifested. The mechanical properties and volume stability of carbonated steel slag were improved, proving that the positive effect of carbonation on steel slag when applied in cement and cementitious materials.
36 MATERIALS SCIENCE↗
Effects of pH on the nano/micro structure of calcium silicate hydrate (C-S-H) under sulfate attack
Calcium silicate hydrate (C-S-H), the most important Portland cement hydration product, determines the mechanical properties and durability of cementitious materials. In marine environment, C-S-H often suffers from sulfate attack – one of the most common and severe degradations for concrete. pH is considered as a critical factor in determining the deterioration behavior of C-S-H during sulfate attack, of which the significance may be overlooked. This study focused on the role of pH on the deterioration of C-S-H in terms of the composition and nano/micro structure under sulfate attack. The results show that lowering pH aggravates the decalcification of C-S-H, whereas a strong alkaline condition is beneficial to increase the resistance to deterioration. An increase in the mean chain length together with the proportion of large pores (>10 nm) is observed when C-S-H is subjected to low-pH sulfate attack (pH = 10–12), resulting in a relatively loose structure. The deep analysis on defective tobermorite model reveals that calcium at the interlayer of C-S-H nanostructure is readily removed under sulfate attack, thereby improving the potential of Si-O-Si groups formation and increases the mean chain length of C-S-H.
36 MATERIALS SCIENCE↗
GeoMicro3D: A novel numerical model for simulating the reaction process and microstructure formation of alkali-activated slag
Highlights: • The GeoMicro3D model was innovatively developed for simulating the reaction process and microstructure formation of AAS. • In GeoMicro3D, the dissolution of slag and reactions of aqueous ions are fundamentally described in the local lattice cell. • A novel approach is proposed to speed up the nucleation simulations. • GeoMicro3D was implemented and verified with the relevant experimental data and thermodynamic calculation results. For the first time, this study developed a novel model, named GeoMicro3D, to simulate the reaction process and microstructure formation of alkali-activated slag. The GeoMicro3D model consists of four modules that are designed to simulate, respectively: (i) the initial spatial distribution of real-shape slag particles in alkaline activator, (ii) the dissolution of slag and diffusion of ions via the transition state theory and lattice Boltzmann method, respectively, (iii) the spatial distribution of reaction products using a nucleation probability theory, and (iv) the chemical reactions with thermodynamic modelling. Afterwards the GeoMicro3D model was implemented and verified. The simulation results were discussed and compared with the relevant experimental data and thermodynamic calculation results using GEMS. A good agreement was found in the comparisons, showing the strong simulation capability of GeoMicro3D.
36 MATERIALS SCIENCE↗
From casting to 3D printing geopolymers: A proof of concept
The objective of this paper is to define a mix design strategy allowing the implementation of geopolymer in powder bed 3D printing. In a selective binder approach, an aluminosilicate powder bed is activated through the deposit of an alkaline silicate solution. We first show that, in comparison to casting, this technology requires mastering the spreading of the liquid into the powder bed to ensure that the reaction takes place where it is needed. A series of experiments at the drop level, mimicking the 3D printing process, were performed to determine the printing solution composition for a given powder bed packing. We then highlight the relationship between the compressive strength of the printed geopolymer and the powder bed saturation, controlled by the printing parameters. Finally, SEM/EDX analysis confirm the formation of geopolymer with desired Si/Al and Na/Al ratios in the resulting printed material.
36 MATERIALS SCIENCE↗
Effects of polycarboxylate ether (PCE)-based superplasticizer on the dissolution and subsequent hydration of calcium oxide (CaO)
Calcium oxide (CaO) is an important construction material, used as expansive agent, alkaline activator, and repairing material for historical structures. In this study, the dissolution and subsequent hydration of CaO, with or without the polycarboxylate ether (PCE)-based superplasticizer, were investigated to elucidate the complex crystallization process of calcium hydroxide (Ca(OH){sub 2}). On contact with pure water, CaO particles began to hydrate within a few minutes, while releasing a significant amount of heat. Adding superplasticizer slowed such rapid heat evolution by forming a dormant period and significantly affected the crystallinity of the hydration product. The dormant period was controllable by the amount of added superplasticizer. Moreover, as a result of early nucleation of Ca(OH){sub 2}, the formation of 10–100-nm spherical nanoparticles was observed via an in-situ transmission electron microscope, which completely differed from the final crystal shape of the hydration product.
36 MATERIALS SCIENCE↗
Portlandite solubility and Ca2+ activity in presence of gluconate and hexitols
The current paper investigates the impact of gluconate, D-sorbitol, d-mannitol and D-galactitol on calcium speciation at high pH values by i) solubility measurements of portlandite (Ca(OH){sub 2}) and ii) potentiometric titration measurements of calcium salt solutions. Thermodynamic modelling was used to fit the chemical activities of Ca{sup 2+} and OH{sup −} ions and thus to determine the strength and kind of the different Ca-organic-hydroxide complexes. The strength of complex formation with Ca{sup 2+} decreases in the order gluconate ≫ sorbitol > mannitol > galactitol, which follows the same order as sorption on portlandite. Heteropolynuclear gluconate complexes with calcium and hydroxide dominate the Ca-speciation in the presence of portlandite, while for sorbitol ternary CaSorbOH{sup +} complexes were dominant under alkaline conditions. We expect that these results will help in better understanding the influence of gluconate and hexitols on the hydration of alite and Portland cement.
36 MATERIALS SCIENCE↗
Effect of seawater as mixing water on the hydration behaviour of tricalcium aluminate
This study explored the mechanism of the effect of seawater on tricalcium aluminate (C{sub 3}A) hydration. The results showed that seawater retarded C{sub 3}A hydration and reduced the reaction degree of C{sub 3}A. The co-existence or ion pairing of Ca{sup 2+} and SO{sub 4}{sup 2−} onto the surface of C{sub 3}A poisoning the reactive sites is the main reason for this retardation. Besides, the precipitation of Mg(OH){sub 2} on the surface of C{sub 3}A would prolong the induction period for another 30 min and then consequently decrease the dissolution rate of C{sub 3}A hydration. Trace amounts of MgSO{sub 4}{sup 0} and Mg{sup 2+} present in the alkaline solution had little retardation effect. It was also found that Cl{sup −} would preferentially react with C{sub 3}A to form Friedel's salt, rather than forming hydroxy-AFm as that in the C{sub 3}A-deionized water paste. The direct formation of Friedel's salt resulted in an accumulation of Al{sup 3+} in solution, which would also hinder the subsequent dissolution of C{sub 3}A.
36 MATERIALS SCIENCE↗