Search NASA⌕ Search

SEARCH · Search NASA

Results for “aqueous processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

SOLIDS PRECIPITATION EVENT IN MCU CAUSAL ANALYSIS AND RECOMMENDATIONS FROM SOLIDS RECOVERY TEAM

A process upset occurred in the Modular Caustic-Side Solvent Extraction Unit (MCU) facility on April 6th, 2014. During recovery efforts, a significant amount of solids were found in the Salt Solution Feed Tank (SSFT), Salt Solution Receipt Tanks (SSRTs), two extraction contactors, and scrub contactors. The solids were identified by Savannah River National Laboratory (SRNL) as primarily sodium oxalate and sodium alumina silicate (NAS) with the presence of some aluminum hydroxide. NAS solids have been present in the SSFT since simulant runs during cold chemical startup of MCU in 2007, and have not hindered operations since that time. During the process upset in April 2014, the oxalate solids partially blocked the aqueous outlet of the extraction contactors, causing salt solution to exit through the contactor organic outlet to the scrub contactors with the organic phase. This salt solution overwhelmed the scrub contactors and passed with the organic phase to the strip section of MCU. The partially reversed flow of salt solution resulted in a Strip Effluent (SE) stream that was high in Isopar™ L, pH and sodium. The primary cause of the excessive solids accumulation in the SSRTs and SSFT at MCU is attributed to an increase in the frequency of oxalic acid cleaning of the 512-S primary filter. Agitation in the SSRTs at MCU in response to cold weather likely provided the primary mechanism to transfer the solids to the contactors. Sources of the sodium oxalate solids are attributed to the oxalic acid cleaning solution used to clean the primary filter at the Actinide Removal Process (ARP) filtration at 512-S, as well as precipitation from the salt batch feed, which is at or near oxalate saturation. The Solids Recovery Team was formed to determine the cause of the solids formation and develop recommendations to prevent or mitigate this event in the future. A total of 53 recommendations were generated. These recommendations were organized into 4 focus areas: • Improve understanding of oxalate equilibrium and kinetics in salt solutions • Reduction/elimination of oxalic acid cleaning in 512-S • Flowsheet optimization • Improving diagnostic capability The recommendations implemented prior to resumption of MCU operations provide a risk mitigation or detection function through additional sampling and observation. The longer term recommendations provide a framework to increase the basic process knowledge of both oxalate chemistry and filtration behavior and then facilitate decisions that improve the salt flowsheet as a system.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Cavitation energies can outperform dispersion interactions

Amongst all intermolecular interactions that bring molecules, biomolecules, and even molecular fragments together, dispersion interactions are the omnipresent ones. Nevertheless, their contribution to solution-phase phenomena has recently become a matter of debate. In aqueous solution, in particular, they compete with the hydrophobic effect, which also drives associative processes, and when macrocyclic cavities are involved, the release of high-energy water has been identified as an extra driving force. We have now studied the binding of noble gases (He, Ne, Ar, Kr, Xe) with the macrocyclic receptor cucurbit[5]uril (CB5) in aqueous solution through a displacement strategy by using methane and ethane as 1H NMR probes. We dissected the hydration free energies of the noble gases into an attractive dispersive contribution and a repulsive one for cavity formation. This allowed us to fine-grain the components that contribute to host-guest binding and we reach the conclusion that the binding process in solution is driven by differential cavitation energies rather than dispersion interactions. This means that the free energy required to create a cavity to accept the noble gas inside CB5 is much lower (actually zero, since the cavity of the host is non-solvated) than that to create a similarly sized cavity in bulk water, and it is the recovery of the latter cavitation energy, which drives the overall process. The concept of differential cavitation energies merges seamlessly two previous approaches for predicting supramolecular thermodynamics, namely that of cohesive energy density (which applies to bulk solvent) and that of high-energy water (which becomes important for discrete concave binding sites). The dominance of differential cavitation energies in driving guest binding to poorly hydrated, concave binding sites (V < 100 Å3) has implications for the refinement of gas-storage materials and the understanding of biological receptors.

He, Suhang↗

Geology of Libya Montes and the Interbasin Plains of Northern Tyrrhena Terra, Mars: Project Introduction and First Year Work Plan

The highland-lowland boundary (HLB) of Mars is interpreted to be a complex tectonic and erosional transition that may hold evidence for past geologic processes and environments. The HLB-abutting margin of the Libya Montes and the interbasin plains of northern Tyrrhena Terra display an exceptional view of the earliest to middle history of Mars that has yet to be fully characterized. This region contains some of the oldest exposed materials on the Martian surface as well as aqueous mineral signatures that may be potential chemical artifacts of early highland formational processes. However, a full understanding of the regions geologic and stratigraphic evolution is remarkably lacking. Some outstanding questions regarding the geologic evolution of Libya Montes and northern Tyrrhena Terra in-clude: Does combining geomorphology and composition advance our understanding of the region s evolution? Can highland materials be subdivided into stratigraphically discrete rock and sediment sequences? What do major physiographic transitions imply about the balanced tectonism, climate change, and erosion? Where is the erosional origin and what is the post-depositional history of channel and plains units? When and in what types of environments did aqueous mineral signatures arise? This abstract introduces the geologic setting, science rationale, and first year work plan of a recently-funded 4-year geologic mapping proposal (project year = calendar year). The objective is to delineate the geologic evolution of Libya Montes and northern Tyrrhena Terra at 1:1M scale using both classical geomorphological and compositional mapping techniques. The funded quadrangles are MTMs 00282, -05282, -10282, 00277, -05277, and -10277.

Skiner, J. A., Jr.↗

Density of Next-Generation Caustic-Side Solvent Extraction Solvent

This report recommends the appropriate modifier concentration to employ in the Next Generation Solvent (NGS) to be used in the Salt Waste Processing Facility (SWPF) at the Savannah River Site for removal of cesium from legacy tank waste. The Next Generation Caustic-Side Solvent Extraction (NG-CSSX) process employing the NGS is a marked improvement over the original Caustic-Side Solvent Extraction (CSSX) process, as it provides more effective removal of cesium from highly alkaline radioactive wastes and concentrates this removed cesium into an aqueous solution that is easy to vitrify for final disposal. Considerable effort has been devoted to optimizing the chemistry and process conditions of both systems, and their effectiveness has been demonstrated at the pilot scale at the Modular CSSX Unit (MCU). Due to the success of the demonstration and pilot-scale tests, the Salt Waste Processing Facility (SWPF) has been built to process larger volumes of waste with the CSSX process. To accelerate the waste-processing rate of the SWPF beyond its design throughput, plans call for the replacement of the CSSX process by the NG-CSSX process. To implement the NG-CSSX process in equipment optimized for CSSX, adjusting the density of the NGS to match the CSSX solvent density of 0.851 ± 0.0008 g/mL is considered advisable to obtain comparable hydraulic performance. Toward this objective, the density of the NGS has been measured at different temperatures and modifier concentrations to determine that a concentration of 0.650 M Cs-7SB modifier provides the best match for the desired density.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Kinetics of the Temperature-Dependent e aq - and ·OH Radical Reactions with Cr(III) Ions in Aqueous Solutions

The reactivity of chromium(III) species with the major oxidizing and reducing radiolysis products of water was investigated in aqueous solutions at temperatures up to 150 °C. The reaction between the hydrated electron (e aq - ) and Cr(III) species showed a positive temperature dependence over this temperature range. The reaction was also studied in pH 2.5 and 3.5 solutions for the first time. This work also studied the reaction between acidic Cr(III) species and the hydroxyl radical (·OH). It was found that Cr 3+ did not react significantly with the ·OH radical, but the first hydrolysis species, Cr(OH) 2+ , did with a rate coefficient of k= (7.2±0.3)×10 8 M -1 s -1 at 25 °C. The oxidation of Cr(OH) 2+ by the ·OH radical formed an absorbing product species that ultimately oxidized to give Cr(VI). In conclusion, these newly measured reaction rates allow for the development of improved models of aqueous chromium speciation for the effective remediation of liquid high-level nuclear waste via vitrification processes.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Oxidative transformation of N-substituted 3-aminopyrazoles to azopyrazoles using electrogenerated bromine as a mediator

The one-pot process of anodic transformation of N-alkyl-3-aminopyrazoles into azopyrazoles under conditions of membraneless electrolysis in an aqueous solution of NaBr was studied for the first time. It was found that under these conditions the aminopyrazoles, which do not have a substituent at position 4, transform into the corresponding 4,4´-dibromoazopyrazoles. The corresponding yield was in the interval of 28—80%, depending on the structure of the products. The transformation of 4-substituted aminopyrazoles resulted in the formation of azopyrazoles in the yields lying within 62—86% when this process was implemented under conditions with the anodically generated Br{sub 2} acting as a mediator. A convenient method of anodic synthesis of azopyrazoles in an aqueous medium without the use of additives of chemical oxidants was proposed. The process is environmentally sound and is characterized by a high atom efficiency (>85%).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-organized highly ordered TiO{sub 2} nanotubes in organic aqueous system

A simple method to achieve self-organized, freestanding TiO{sub 2} nanotube array was constructed, free of corrosive etching process which was traditionally employed to separate TiO{sub 2} nanotubes from the metallic Ti substrate. The TiO{sub 2} nanotube arrays were constructed through potentiostatic anodization of Ti foil in aqueous electrolyte containing NH{sub 4}F and ethylene glycol. The nanotubes in the array were of 45 {mu}m lengths and 100 nm average pore diameters. The effect of NH{sub 4}F concentration on the length of the self-organized nanotube arrays was investigated. Electrochemical and spectroscopic measurements showed that the as-prepared nanotubes possessed large surface areas, good uniformity, and were ready for enzyme immobilization. The as-prepared nanotube arrays were amorphous, but crystallized with annealing at elevated temperatures, as demonstrated by X-ray diffraction (XRD).

36 MATERIALS SCIENCE↗

Supercritical Water Oxidation and a Preliminary Concept for Lunar Application

Abstract: Water is a critical resource for crewed space exploration missions and reclamation of aqueous waste streams presents the only long-term viable option. Although early Artemis missions are considering water as part of the payload manifest, it would be extremely advantageous if follow-on missions were supplied—either in total or in part—by a reclamation technology that would operate autonomously between missions. An attractive technology is currently under ongoing research at NASA Glenn Research Center (GRC) that employs a Supercritical Water Oxidation (SCWO) process to destroy all hydrocarbons in the waste stream. Testing of an aqueous waste stream simulant, typical of what is generated on the International Space Station (ISS), has shown reductions in Total Organic Carbon (TOC) of greater than 99% with reactor residence times less than 30 s. Recent effort has been directed toward developing a conceptual design based on the current tubular reactor used in the evaluation of the conversion of SCWO. This conceptual design along with the results of recent SCWO conversion experiments will be presented. Recent design enhancements to achieve shorter residence times along with “production simulation” tests will be presented. The diagnostics used in assessing the extent of the waste conversion include a total organic carbon (TOC) analysis, Raman analyses, and measurements of pH, turbidity, and conductivity. Results obtained from the modified reactor configuration will also be compared to those of the Phase I configuration presented in earlier work.

SCWO↗

Analysis of switchgrass-derived bio-oil and associated aqueous phase generated in a semi-pilot scale auger pyrolyzer

To efficiently utilize water-soluble compounds in bio-oil and evaluate the potential effects of these compounds on processes such as microbial electrolysis, our study investigated the physico-chemical properties of bio-oil and the associated aqueous phase generated from switchgrass using a semi-pilot scale auger pyrolyzer. Combining separation and detection strategies with organic solvent extraction, an array of analytical instruments and methods were used to identify and quantify the chemical constituents. Separation of an aqueous phase from crude bio-oil was achieved by adding water (water: crude bio-oil at 4:1 in weight), which resulted in a partition of 61 wt.% of the organic compounds into a bio-oil aqueous phase (BOAP). GC/MS analysis for BOAP identified over 40 compounds of which 16 were quantified. Acetic acid, propionic acid, and levoglucosan are the major components in BOAP. In addition, a significant portion of chemicals that have the potential to be upgraded to hydrocarbon fuels were extracted to BOAP (77 wt.% of the alcohols, 61 wt.% of the furans, and 52 wt.% of the phenolic compounds in crude bio-oil). Valorization of the BOAP may require conversion methods capable of accommodating a very broad substrate specificity. Ultimately, a better separation strategy is needed to selectively remove the acidic and polar components from crude bio-oil to improve economic feasibility of biorefinery operations.

09 BIOMASS FUELS↗

Influence of design and operating parameters for additively manufactured intensified packing devices on CO 2 -Absorption column cooling and capture efficiency

Solvent-based CO 2 absorption is technologically a matured CO 2 capture pathway but suffers from: high regeneration energy demand, and solvent temperature rise and decreased capture efficiency caused by the heat of reaction. While research has focused on developing non-aqueous and low-aqueous solvents for decreasing the regeneration energy, the temperature bulge due to exothermic absorption is typically dealt with by cooling the solvent with an external inter-stage heat-exchanger. This approach may increase the overall process footprint, as well as capital and operating costs. Here, the current study explores a process intensification approach by incorporating inside the column an additively manufactured intensified packing device that consists of corrugated plates and internal coolant channels. The corrugated plates provide surface area for mass transfer between gas and liquid, while cooling fluid inside the internal channels removes heat from the exothermic reactive system. Two different intensified devices with specific surface areas of 266 m 2 /m 3 and 359 m 2 /m 3 were designed, manufactured, and tested inside a 2.06-m long and 0.203-m diameter column packed with commercial Mellapak 250Y packing. The device with a lower surface area showed up to 27 % reduction in cooling performance. A steady-state heat transfer model provides good agreement with the experimental column temperature and intra-stage heat removal data. Although a decrease in heat transfer performance was observed for the device with lower surface area, CO 2 capture experiments performed with simulated flue gas and low-aqueous solvent demonstrated that both intensified devices lead to a similar improvement of 12 % in capture efficiency. This study provides an understanding on simplifying the intensified packing device geometry and decreasing the device fabrication cost by 25 % without compromising with the CO 2 absorption performance of the packed column.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hybrid Quantum Mechanical, Molecular Mechanical, and Machine Learning Potential for Computing Aqueous-Phase Adsorption Free Energies on Metal Surfaces

Performing reliable computer simulations of elementary processes occurring at metal–water interfaces is pivotal for novel catalyst design in sustainable energy applications. Computational catalyst design hinges on the ability to reliably and efficiently compute the potential energy surface (PES) of the system. Here, due to the large system sizes needed for studying processes at liquid water–metal interfaces, these systems can currently not be described using density functional theory (DFT). In this work, we used a hybrid quantum mechanical, molecular mechanical, and machine learning potential for studying the adsorption behavior of phenol, atomic hydrogen, 2-butanol, and 2-butanone on the (0001) facet of Ru under reducing conditions when Ru is not oxidized. Specifically, we describe the adsorbate and the surrounding metal atoms at the DFT level of theory. Here, we also considered the electrostatic field effect of the water molecules on adsorbate–metal interactions. Next, for the water–water and water–adsorbate interactions, we used established classical force fields. Finally, for the water–Ru surface interaction, for which no reliable force fields have been published, we used Behler–Parrinello high-dimensional neural network potentials (HDNNPs). Employing this setup, we used our explicit solvation for metal surface (eSMS) approach to compute the aqueous-phase effect on the low-coverage adsorption of selected molecules and atoms on the (0001) facet of Ru. In agreement with previous experimental and computational studies of oxygenated molecules over transition metal facets, we found that liquid water destabilizes the tested adsorbates on Ru(0001). Interestingly, our findings indicate that adsorbates on Ru are less affected by the presence of an aqueous phase than on other transition metals (e.g., Pt), highlighting the necessity of experimental investigations of Ru-based catalytic systems in liquid water.

Adsorption↗

Structural and dynamical studies of acid-mediated conversion in amorphous-calcium-phosphate based dental composites

Our objective was to investigate the complex structural and dynamical conversion process of the amorphous-calcium-phosphate (ACP)-to-apatite transition in ACP based dental composite materials. Composite disks were prepared using zirconia hybridized ACP fillers (0.4 mass fraction) and photo-activated Bis-GMA/TEGDMA resin (0.6 mass fraction). We performed an investigation of the solution-mediated ACP-to-apatite conversion mechanism in controlled acidic aqueous environment with in situ ultra-small angle X-ray scattering based coherent X-ray photon correlation spectroscopy and ex situ X-ray diffraction, as well as other complementary techniques. We established that the ACP-to-apatite conversion in ACP composites is a two-step process, owing to the sensitivity to local structural changes provided by coherent X-rays. Initially, ACP undergoes a local microstructural rearrangement without losing its amorphous character. We established the catalytic role of the acid and found the time scale of this rearrangement strongly depends on the pH of the solution, which agrees with previous findings about ACP without the polymer matrix being present. In the second step, ACP is converted to an apatitic form with the crystallinity of the formed crystallites being poor. Separately, we also confirmed that in the regular Zr-modified ACP the rate of ACP conversion to hydroxyapatite is slowed significantly compared to unmodified ACP, which is beneficial for targeted slow release of functional calcium and phosphate ions from dental composite materials. Significantly, for the first time, we were able to follow the complete solution-mediated transition process from ACP to apatite in this class of dental composites in a controlled aqueous environment. A two-step process, suggested previously, was conclusively identified.

36 MATERIALS SCIENCE↗

Nanocellulose Dewatering and Drying: Current State and Future Perspectives

The knowledge base for nanocellulose (NC) has grown exponentially over the past two decades and continues to expand with the increasing number of potential applications demonstrated in the literature and the patent space. NC has multiple forms depending on the starting cellulose source and the specific process used to produce it. Its high degree of surface reactivity makes it an ideal support structure for a wide variety of functional groups, leading to the ability to engineer materials for very specific applications. However, removing water from an NC suspension, e.g., dewatering and drying, while retaining the nanoscale properties of the NC remains a significant challenge to successful commercialization of NC materials. Processes for dewatering and drying of NC are desirable because of the high transport costs of shipping dilute aqueous suspensions, as well as end-use application requirements. Therefore, the development of nondestructive, cost-effective, scalable, and environmentally friendly dewatering and drying processes is important for commercial deployment of NC applications. This review addresses the current state of published knowledge on NC dewatering and drying and identifies research gaps that could be further explored in a precompetitive context to accelerate commercialization.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Isothermal dehydration of thin films of water and sugar solutions

The process of quasi-isothermal dehydration of thin films of pure water and aqueous sugar solutions is investigated with a dual experimental and theoretical approach. A nanoporous paper disk with a homogeneous internal structure was used as a substrate. This experimental set-up makes it possible to gather thermodynamic data under well-defined conditions, develop a numerical model, and extract needed information about the dehydration process, in particular the water activity. It is found that the temperature evolution of the pure water film is not strictly isothermal during the drying process, possibly due to the influence of water diffusion through the cellulose web of the substrate. The role of sugar is clearly detectable and its influence on the dehydration process can be identified. At the end of the drying process, trehalose molecules slow down the diffusion of water molecules through the substrate in a more pronounced way than do the glucose molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Detailed Reaction Mechanism for Thiosulfate Oxidation by Ozone in Aqueous Environments

The ozone oxidation, or ozonation, of thiosulfate is an important reaction for wastewater processing, where it is used for remediation of mining effluents, and for studying aerosol chemistry, where its fast reaction rate makes it an excellent model reaction. Although thiosulfate ozonation has been studied since the 1950s, challenges remain in developing a realistic reaction mechanism that can satisfactorily account for all observed products with a sequence of elementary reaction steps. Here, we present novel measurements using trapped microdroplets to study the pH-dependent thiosulfate ozonation kinetics. We detect known products and intermediates, including SO32-, SO42-, S3O62-, and S4O62-, establishing agreement with the literature. However, we identify S2O42- as a new reaction intermediate and find that the currently accepted mechanism does not directly explain observed pH effects. Thus, we develop a new mechanism, which incorporates S2O42- as an intermediate and uses elementary steps to explain the pH dependence of thiosulfate ozonation. The proposed mechanism is tested using a kinetic model benchmarked to the experiments presented here, then compared to literature data. We demonstrate good agreement between the proposed thiosulfate ozonation mechanism and experiments, suggesting that the insights in this paper can be leveraged in wastewater treatment and in understanding potential climate impacts.

Deal, Alexandra M↗

TOGA: A TOUGH code for modeling three-phase, multi-component, and non-isothermal processes involved in CO2-based Enhanced Oil Recovery (TOGA) v1.0

TOGA (TOUGH Oil, Gas, Aqueous) is a numerical reservoir simulator for modeling non-isothermal flow and transport of water, CO2, multicomponent oil, and related gas components for applications including CO2-enhanced oil recovery (CO2-EOR) and geologic carbon sequestration in depleted oil and gas reservoirs. TOGA uses an approach based on the Peng-Robinson equation of state (PR-EOS) to calculate the thermophysical properties of the gas and oil phases including the gas/oil components dissolved in the aqueous phase, and uses a mixing model to estimate the thermophysical properties of the aqueous phase.

Oldenburg, CurtisM↗

Process for the extraction of technetium from uranium

A spent fuel reprocessing method contacts an aqueous solution containing Technetium(V) and uranyl with an acidic solution comprising hydroxylamine hydrochloride or acetohydroxamic acid to reduce Tc(V) to Tc(II, and then extracts the uranyl with an organic phase, leaving technetium(II) in aqueous solution.

Gong, Cynthia-May S↗