Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Final Report for the Project Characterization and Valorization of Aqueous Phases Derived from Liquefaction and Upgrading of Bio-Oils

The Characterization and Valorization of Aqueous Phases Derived from Liquefaction and Upgrading of Bio-Oils project developed processes to extract value from the organics within aqueous streams derived from biomass direct liquefaction processes. The focus of the project was twofold. First, we characterized a diverse set of aqueous streams from numerous processes and feedstocks. The characterization effort served to inform this project toward development around the most prevalent compounds to maximize versatility and impact. We analyzed diverse streams from hydrothermal liquefaction of lignocellulosic, algal, and waste feedstocks; catalytic fast-pyrolysis aqueous phases; fast-pyrolysis aqueous phases; and aqueous phases produced by hydroprocessing of fast-pyrolysis bio-oil. Second, thermochemical catalytic processes were developed to convert aqueous-phase organics into useful products. These processes focused mostly on organic acids and specifically acetic acid, which was found to be ubiquitous from the characterization effort. A La x Zr y O z catalyst was discovered and developed for the ketonization of acids to ketones in the condensed aqueous phase. A dual-bed steam reforming process was developed to convert acids and other organics to hydrogen for bio-oil hydroprocessing. The dual-bed reforming process consisted of a ketonization step followed by a steam reforming step with Co as the active metal. The dual-bed process significantly reduced the rate of coke deposition versus direct steam reforming of the organic acids and beneficially produced CH 4 below the equilibrium value. Finally, we demonstrated direct conversion of aqueous-phase organics to olefins over a Zn x Zr y O z catalyst. Each thermochemical catalytic process was demonstrated with process-derived aqueous mixtures. Model compounds were used to benchmark performance and optimize conditions, but emphasis was placed on utilizing “real” aqueous streams whenever possible. A liquid-liquid extraction process using methyl tert-butyl ether as the solvent was developed to segregate dissolved inorganic species and sugars from desirable light oxygenates such as acids and alcohols. Furthermore, a carbon treatment to remove color bodies was employed after it was found the presumably heavy organic chromophore species deactivated catalysts. These economic separation processes allowed for the successful demonstration of stable catalytic processing in the condensed-phase ketonization, dual-bed reforming, and direct olefin production processes for tens to hundreds of hours, which were limited only by the quantity of feed available. Techno-economic analysis of these processes demonstrated the impact possible when capturing “waste” organics as valuable products. The condensed-phase ketonization process for converting aqueous stream acids to ketones followed by reduction and dehydration to olefins sold as a co-product resulted in the reduction of the minimum fuel selling price by about 13% compared to the anaerobic-digestion, aqueous-phase treatment base case (3.74 to 4.29/GGE). The dual-bed reforming process was commensurate in price to the anaerobic digestion base case (4.24 versus 4.29/GGE). However, the need for external natural gas to produce hydrogen for bio-oil hydroprocessing was eliminated, thereby lowering the carbon impact of the process.

09 BIOMASS FUELS↗

Nonoxidative dehydrogenation of propane using boron-incorporated silica-supported Pt Sites synthesized by atomic layer deposition

Nonoxidative dehydrogenation of propane to propylene using Pt-based supported catalysts is an active research area in catalysis because catalyst attributes of Pt sites can be controlled by careful design of active sites. One way to achieve this is by the addition of a second metal that may impart a change in the electron density of active sites, which in turn affects catalytic performance. In this study, bimetallic Pt and B sites were deposited on powder SiO2 using atomic layer deposition (ALD). Boron was first deposited on SiO2 via half-cycle ALD using triisoproplyborate as the B source. Following calcination, Pt deposition was performed via half-cycle ALD using trimethyl(methylcyclopentadienyl)platinum(IV) as the Pt source. The synthesized catalysts were reduced under H2 at 550 °C and characterized using inductively coupled plasma optical emission spectroscopy for elemental analysis, diffuse reflectance infrared Fourier transform spectroscopy of adsorbed CO to examine the properties of Pt, and time-resolved X-ray absorption near edge structure spectroscopy to examine the changes in the reducibility of Pt sites. The samples were then tested for nonoxidative dehydrogenation of propane at 550 °C using a fixed-bed plug-flow reactor to examine the role of B on the catalytic performance. Characterization results showed that the addition of B imparted an increase in electron density and affected the reducibility of Pt sites. In addition, incorporating B on SiO2 created anchoring sites for Pt ALD. The amount of Pt deposited on B/SiO2 was 2.2 times that on SiO2. Catalytic activity results revealed the addition of B did not change the initial activity of Pt sites significantly, but improved propylene selectivity from 80% to 87% and stability almost threefold. The enhanced selectivity and stability of PtB/SiO2 is most presumably due to favored desorption of propylene and mitigating coke formation under reaction conditions, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth of Carbon Nanostructure Materials Using Laser Vaporization

Since the potential applications of carbon nanotubes (CNT) was discovered in many fields, such as non-structure electronics, lightweight composite structure, and drug delivery, CNT has been grown by many techniques in which high yield single wall CNT has been produced by physical processes including arc vaporization and laser vaporization. In this presentation, the growth mechanism of the carbon nanostructure materials by laser vaporization is to be discussed. Carbon nanoparticles and nanotubes have been synthesized using pulsed laser vaporization on Si substrates in various temperatures and pressures. Two kinds of targets were used to grow the nanostructure materials. One was a pure graphite target and the other one contained Ni and Co catalysts. The growth temperatures were 600-1000 C and the pressures varied from several torr to 500 torr. Carbon nanoparticles were observed when a graphite target was used, although catalysts were deposited on substrates before growing carbon films. When the target contains catalysts, carbon nanotubes (CNT) are obtained. The CNT were characterized by scanning electron microscopy, x-ray diffraction, optical absorption and transmission, and Raman spectroscopy. The temperature-and pressure-dependencies of carbon nanotubes' growth rate and size were investigated.

Zhu, Shen↗

Migration and aggregation of Pt atoms on metal oxide-supported ceria nanodomes control reverse water gas shift reaction activity

Abstract Single-atom catalysts (SACs) are particularly sensitive to external conditions, complicating the identification of catalytically active species and active sites under in situ or operando conditions. We developed a methodology for tracing the structural evolution of SACs to nanoparticles, identifying the active species and their link to the catalytic activity for the reverse water gas shift (RWGS) reaction. The new method is illustrated by studying structure-activity relationships in two materials containing Pt SACs on ceria nanodomes, supported on either ceria or titania. These materials exhibited distinctly different activities for CO production. Multimodal operando characterization attributed the enhanced activity of the titania-supported catalysts at temperatures below 320 ˚C to the formation of unique Pt sites at the ceria-titania interface capable of forming Pt nanoparticles, the active species for the RWGS reaction. Migration of Pt nanoparticles to titania support was found to be responsible for the deactivation of titania-supported catalysts at elevated temperatures. Tracking the migration of Pt atoms provides a new opportunity to investigate the activation and deactivation of Pt SACs for the RWGS reaction.

36 MATERIALS SCIENCE↗

High field electron paramagnetic resonance spectroscopy under ultrahigh vacuum conditions—A multipurpose machine to study paramagnetic species on well defined single crystal surfaces

A new ultrahigh vacuum (UHV) electron paramagnetic resonance (EPR) spectrometer operating at 94 GHz to investigate paramagnetic centers on single crystal surfaces is described. It is particularly designed to study paramagnetic centers on well-defined model catalysts using epitaxial thin oxide films grown on metal single crystals. The EPR setup is based on a commercial Bruker E600 spectrometer, which is adapted to ultrahigh vacuum conditions using a home made Fabry Perot resonator. The key idea of the resonator is to use the planar metal single crystal required to grow the single crystalline oxide films as one of the mirrors of the resonator. EPR spectroscopy is solely sensitive to paramagnetic species, which are typically minority species in such a system. Hence, additional experimental characterization tools are required to allow for a comprehensive investigation of the surface. The apparatus includes a preparation chamber hosting equipment, which is required to prepare supported model catalysts. In addition, surface characterization tools such as low energy electron diffraction (LEED)/Auger spectroscopy, temperature programmed desorption (TPD), and infrared reflection absorption spectroscopy (IRAS) are available to characterize the surfaces. A second chamber used to perform EPR spectroscopy at 94 GHz has a room temperature scanning tunneling microscope attached to it, which allows for real space structural characterization. The heart of the UHV adaptation of the EPR experiment is the sealing of the Fabry-Perot resonator against atmosphere. To this end it is possible to use a thin sapphire window glued to the backside of the coupling orifice of the Fabry Perot resonator. With the help of a variety of stabilization measures reducing vibrations as well as thermal drift it is possible to accumulate data for a time span, which is for low temperature measurements only limited by the amount of liquid helium. Test measurements show that the system can detect paramagnetic species with a density of approximately 5 × 10{sup 11} spins/cm{sup 2}, which is comparable to the limit obtained for the presently available UHV-EPR spectrometer operating at 10 GHz (X-band). Investigation of electron trapped centers in MgO(001) films shows that the increased resolution offered by the experiments at W-band allows to identify new paramagnetic species, that cannot be differentiated with the currently available methodology.

36 MATERIALS SCIENCE↗

Catalysts Prepared from Atomically Dispersed Ce(III) on MgO Rival Bulk Ceria for CO Oxidation

Atomically dispersed cerium catalysts on an inert, crystalline MgO powder support were prepared by using both Ce(III) and Ce(IV) precursors. The materials were used as catalysts for CO oxidation in a once-through flow reactor and characterized by atomic-resolution scanning transmission electron microscopy, X-ray absorption near edge structure spectroscopy, X-ray photoelectron spectroscopy, and temperature-programmed reduction, among other techniques, before and after catalysis. The most active catalysts, formed from the precursor incorporating Ce(III), displayed a performance similar to that reported for bulk ceria under comparable conditions. The catalyst provided stable time-on-stream performance for as long as it was kept on stream, two days, increasing slightly in activity as the atomically dispersed cerium ions were transformed into ceria nanodomains represented as CeO x and having increased reducibility on the MgO support. Furthermore, the results suggest how highly dispersed supported ceria catalysts with low cerium loadings can be prepared and may pave the way to improved efficiencies of cerium utilization in oxidation catalysis.

36 MATERIALS SCIENCE↗

Catalyst Layer Resistance and Utilization in PEM Electrolysis

Improving utilization, performance, and stability of low iridium (Ir)-loaded anodes is a key goal to enable widespread adoption of polymer electrolyte membrane water electrolysis (PEMWE) for clean hydrogen production. A potential limitation is high ionic or electronic resistance of the anode catalyst layer, which leads to poor catalyst utilization, increased voltage losses, and high local overpotentials that can accelerate degradation. While catalyst layer resistance is relatively well-understood in fuel cells and other porous electrode systems, characterization of these effects is not as well established in PEMWE research. Here we present in-situ methods for measuring catalyst layer resistance in electrolysis cells using a non-faradaic H 2 /H 2 O condition as well as methods for calculating the associated voltage losses. These methods are applied to anode catalyst layers based on IrO 2 nanoparticles as well as dispersed nano-structured thin film (NSTF) Ir catalysts. Trends with anode catalyst loading and interactions between the porous transport layer and catalyst layer are investigated for IrO 2 anodes. Post-mortem microscopic analysis of durability-tested anodes is also presented, showing uneven degradation of the catalyst layer caused by catalyst layer resistance.

08 HYDROGEN↗

Strong Metal–Support Interactions between Copper and Iron Oxide during the High‐Temperature Water‐Gas Shift Reaction

Abstract The commercial high‐temperature water‐gas shift (HT‐WGS) catalyst consists of CuO‐Cr 2 O 3 ‐Fe 2 O 3 , where Cu functions as a chemical promoter to increase the catalytic activity, but its promotion mechanism is poorly understood. In this work, a series of iron‐based model catalysts were investigated with in situ or pseudo in situ characterization, steady‐state WGS reaction, and density function theory (DFT) calculations. For the first time, a strong metal‐support interaction (SMSI) between Cu and FeO x was directly observed. During the WGS reaction, a thin FeO x overlayer migrates onto the metallic Cu particles, creating a hybrid surface structure with Cu‐FeO x interfaces. The synergistic interaction between Cu and FeO x not only stabilizes the Cu clusters, but also provides new catalytic active sites that facilitate CO adsorption, H 2 O dissociation, and WGS reaction. These new fundamental insights can potentially guide the rational design of improved iron‐based HT‐WGS catalysts.

Zhu, Minghui↗

In situ characterization of cofacial Co(IV) centers in Co 4 O 4 cubane: Modeling the high-valent active site in oxygen-evolving catalysts

The Co 4 O 4 cubane is a representative structural model of oxidic cobalt oxygen evolving catalysts (Co-OECs). The Co-OECs are active when residing at two oxidation levels above an all Co(III) resting state. This doubly oxidized Co(IV) 2 state may be captured in a Co(III) 2 (IV) 2 cubane. We demonstrate that the Co(III) 2 (IV) 2 cubane may be electrochemically generated and the electronic properties of this unique high-valent state may be probed by in situ spectroscopy. Intervalence charge transfer (IVCT) bands in the near-IR are observed for the Co(III) 2 (IV) 2 cubane, and spectroscopic analysis together with electrochemical kinetics measurements reveal a larger reorganization energy and a smaller electron transfer rate constant for the doubly versus singly oxidized cubane. Spectroelectrochemical X-ray absorption data further reveal systematic spectral changes with successive oxidations from the cubane resting state. Electronic structure calculations correlated to experimental data suggest that this state is best represented as a localized, antiferromagnetically coupled Co(IV) 2 dimer. The exchange coupling in the cofacial Co(IV) 2 site allows for parallels to be drawn between the electronic structure of the Co 4 O 4 cubane model system and the high valent active site of the Co-OEC, with specific emphasis on the manifestation of a doubly oxidized Co(IV) 2 center on O–O bond formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nano sheets, needles and grains-like CuO/γ-Al{sub 2}O{sub 3} catalysts’ performance in carbon monoxide oxidation

Highlights: • Shape-selective preparation of CuO nanostructures. • Physicochemical characterizations. • Shape dependent catalytic CO oxidation performance. - Abstract: This research deals with preparation, characterization and shape dependent performance of copper oxide nanomaterials (CuO NMs) in simple carbon monoxide (CO) oxidation catalysis. Uniform and high purity rice grains-like, needle-like and sheet-like CuO NMs were achieved by adopting different experimental conditions. The shape selective CuO NMs were physically mixed and re-pelletized with γ-Al{sub 2}O{sub 3} thus 1 wt% CuO/γ-Al{sub 2}O{sub 3} catalyst was prepared. The catalysts exhibited good surface area (186–190 m{sup 2} g{sup −1}), crystallinity, thermal stability and metal dispersion. The performance of various shape CuO/γ-Al{sub 2}O{sub 3} catalysts in CO oxidation catalysis showed that needle-like CuO NMs performed superior against grains-like or sheet like CuO NMs in the temperature region between 200 and 225 °C. The 100% CO{sub 2} formation was achieved at 325 and 400 °C in the dry and wet conditions. Also, in every process temperature, differences in the catalytic activity due to catalyst's shape could be noted significantly. It was observed that the catalyst morphology played main role in achieving efficient catalytic process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Operando Structure Determination of Cu and Zn on Supported MgO/SiO 2 Catalysts during Ethanol Conversion to 1,3-Butadiene

Electronic structure and reactivity of Cu- and Zn-promoted wet kneaded MgO/SiO 2 catalysts was interrogated during ethanol reaction to 1,3-BD. A multimodal nature of characterization, including in situ or operando X-ray, electron, light spectroscopies and steady state reactivity measurements demonstrated critical new information on the temporal evolution of the catalyst active sites including key measurements performed operando using synchrotron source (EXAFS and XANES). In situ DRIFT spectroscopy allowed to decouple the aldol condensation and dehydrogenation reactive steps due to the promotion with enhanced ability to carry out aldol condensation, as correlated with the steady state reactivity experiments . In situ UV-Vis spectroscopy presented a complex picture of the adsorbates with π- π* electronic transitions due to the allylic cations, cyclic or aromatic species while also suggesting oligomeric CuO species were formed. Operando X-ray measurements combined with ab initio multiple scattering modelling performed as a function of temperature identified a new transient intermediate assigned to a 4-fold coordinate Cu species that was key leading to increase in Cu-Cu pair number. For the first time, two types of Zn pairs, namely Zn-O and Zn-Mg, were identified during X-ray analysis under operating conditions. With Zn nearly 6-coordinated when in the vicinity of Mg while Zn-O species coordinated to nearly 4 nearest neighbors. The data suggest that such supported catalyst deactivation might proceed not only via carbon coking mechanism but also through the dispersed Cu site diffusion and growth due to the nearest neighbor oxygen atoms loss. The results presented suggest intermediates for segregation/deactivation mechanisms for a broader set of supported Cu and Zn catalysts used for alcohol upgrading catalytic reactions.

1,3-butadiene↗

Improved Coking Resistance of “Intelligent” Ni Catalysts Prepared by Atomic Layer Deposition

Conformal CaTiO 3 films were deposited onto MgAl 2 O 4 by atomic layer deposition (ALD) and then examined as “intelligent” catalyst supports for Ni in the steam and CO 2 reforming of methane. CaTiO 3 films (1 nm) were characterized by scanning transmission electron microscopy and XRD and shown to be stable to at least 1073 K. Catalysts with 1 and 20 wt % Ni were studied, and it was found that, following calcination at 1073 K, the Ni-CaTiO 3 /MgAl 2 O 4 catalysts required high-temperature reduction to achieve activities comparable to that of their Ni/MgAl 2 O 4 counterparts. However, the Ni-CaTiO 3 /MgAl 2 O 4 catalysts exhibited dramatically improved tolerance toward carbon-whisker formation. The carbon content on the 1 wt % Ni catalyst on CaTiO 3 /MgAl 2 O 4 was small even after heating the catalyst in a dry, 10% CH 4 –90% He mixture at 1073 K for 12 h. As a result, possible mechanisms for the high carbon tolerance of the perovskite-containing catalysts are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Epitaxial and Strong Support Interactions between Pt and LaFeO 3 Films Stabilize Pt Dispersion

The ability to stabilize very small Pt crystallites in supported-metal catalysts following harsh treatments is an important industrial problem. Herein, we demonstrate that Pt particles can be maintained in the 1- to 2-nm range following multiple oxidation and reduction cycles at 1073 K when the particles are supported on 0.5-nm LaFeO 3 films that have been deposited onto MgAl 2 O 4 using atomic layer deposition (ALD). Characterization by Scanning Transmission Electron Microscopy (STEM) suggest that, when the catalyst is oxidized at 1073 K, the Pt crystallites are oriented with respect to the underlying LaFeO 3 . X-Ray Absorption Spectroscopy (XAS) also shows evidence for changes in the Pt environment. CO-oxidation rates for the reduced catalyst remain unchanged after five redox cycles at 1073 K. Epitaxial growth of Pt clusters and the consequent strong metal-support interaction between Pt and LaFeO 3 are indicated to be prime reasons for the enhanced catalytic performances.

36 MATERIALS SCIENCE↗

Mixed Alcohol Dehydration over Bronsted and Lewis Acidic Catalysts

Mixed alcohols are attractive oxygenated products of biomass-derived syngas because they may be catalytically converted to a range of hydrocarbon products, including liquid hydrocarbon fuels. Catalytic dehydration to form olefins is a potential first step in the conversion of C 2 –C 4 alcohols into longer-chain hydrocarbons. Here, we describe the physical and chemical characterization along with catalytic activity and selectivity of 4 Brønsted and Lewis acidic catalysts for the dehydration of two mixed alcohol feed streams that are representative of products from syngas conversion over K-CoMoS type catalysts (i.e., ethanol, 1-propanol, 1-butanol and 2-methyl-1-propanol). Specifically, a Lewis acidic Zr-incorporated mesoporous silicate (Zr-KIT-6), a commercial Al-containing mesoporous silicate (Al-MCM-41), a commercial microporous aluminosilicate (HZSM-5), and a commercial microporous silicoaluminophosphate (SAPO-34) were tested for mixed alcohol dehydration at 250, 300 and 350 °C. The zeolite materials exhibited high activity (>98% ethanol conversion) at all temperatures while the mesoporous materials only displayed significant activity (>10% ethanol conversion) at or above 300 °C. The turnover frequencies for ethanol dehydration at 300 °C decreased in the following order: HZSM-5 > SAPO-34 > Al-MCM-41 > Zr-KIT-6, suggesting that Brønsted acidic sites are more active than Lewis acidic sites for alcohol dehydration. At 300 °C, SAPO-34 produced the highest yield of olefin products from both a water-free ethanol rich feed stream and a C 3+ -alcohol rich feed stream containing water. Post-reaction characterization indicated changes in the Brønsted-to-Lewis acidic site ratios for Zr-KIT-6, Al-MCM-41 and HZSM-5. Ammonia temperature programmed desorption indicated that the acid sites of post-reaction samples could be regenerated following treatment in air. The post-reaction SAPO-34 catalyst contained more aromatic, methylated aromatic and polyaromatic compounds than its zeolite counterpart HZSM-5, while no aromatic compounds were observed on post-reaction Al-MCM-41 or Zr-KIT-6 catalysts. Olefin yield at 300 °C over SAPO-34 (>95%) was comparable to published values for the methanol-to-olefins process, indicating the potential industrial application of mixed alcohol dehydration. Furthermore, the olefin product distribution over SAPO-34 was tunable by the composition of the alcohol feed mixture.

09 BIOMASS FUELS↗

Dynamic Interplay between Copper Tetramers and Iron Oxide Boosting CO2 Conversion to Methanol and Hydrocarbons under Mild Conditions.

Atomically precise subnanometer catalysts are of significant interest because of their remarkable efficiency in a variety of catalytic reactions. However, the dynamic changes of active sites under reaction conditions, in particular, the transition of cluster-oxide interface structure have not yet been well-elucidated, lacking in situ measurements. By using multiple state-of-the-art in situ characterizations, here we show a dynamic interplay between copper tetramers and iron oxides in a single-size Cu-4/Fe2O3 catalyst, yielding an enrichment of surface Cu-4-Fe2+ species under reaction conditions that boosts CO2 hydrogenation at near-atmospheric pressures. During reaction, Cu-4 clusters facilitate the reduction of Fe2O3 producing surface-rich Fe2+ species in the proximate sites. The as-formed Fe2+ species in return promotes CO2 activation and transformation over Cu4 cluster, resulting in strikingly high methanol synthesis at low temperatures and C-1/C-3 hydrocarbon production in a high-temperature regime. The discovery of highly active Cu-4-Fe2+ sites thus provides new insights for the atomic-level design of copper catalyst toward high-efficiency CO2 conversion under mild conditions.

CO2 conversion↗