Anomalous metal segregation in lithium-rich material provides design rules for stable cathode in lithium-ion battery
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Manganese oxides are regarded as one of the most promising cathode materials in rechargeable aqueous Zn-ion batteries (ZIBs) because of the low price and high security. However, the practical application of Mn 2 O 3 in ZIBs is still plagued by the low specific capacity and poor rate capability. Herein, highly crystalline Mn 2 O 3 materials with interconnected mesostructures and controllable pore sizes are obtained via a ligand-assisted self-assembly process and used as high-performance electrode materials for reversible aqueous ZIBs. The coordination degree between Mn 2+ and citric acid ligand plays a crucial role in the formation of the mesostructure, and the pore sizes can be easily tuned from 3.2 to 7.3 nm. Ascribed to the unique feature of nanoporous architectures, excellent zinc-storage performance can be achieved in ZIBs during charge/discharge processes. The Mn 2 O 3 electrode exhibits high reversible capacity (233 mAh g -1 at 0.3 A g -1 ), superior rate capability (162 mAh g -1 retains at 3.08 A g -1 ) and remarkable cycling durability over 3000 cycles at a high current rate of 3.08 A g -1 . Moreover, the corresponding electrode reaction mechanism is studied in depth according to a series of analytical methods. These results suggest that rational design of the nanoporous architecture for electrode materials can effectively improve the battery performance.
Li 2 MnO 3 is a critical component in the family of "Li-excess" materials, which are attracting attention as advanced cathode materials for Li-ion batteries. Here, first-principle calculations are presented to investigate the electrochemical activity and structural stability of stoichiometric Li x MnO 3 (0 ≤ x ≤ 2) as a function of Li content. The Li 2 MnO 3 structure is electrochemically activated above 4.5 V on delithiation and charge neutrality in the bulk of the material is mainly maintained by the oxidization of a portion of the oxygen ions from O 2- to O 1- . While oxygen vacancy formation is found to be thermodynamically favorable for x < 1, the activation barriers for O 2- and O 1- migration remain high throughout the Li composition range, impeding oxygen release from the bulk of the compound. Defect layered structures become thermodynamically favorable at lower Li content (x < 1), indicating a tendency towards the spinel-like structure transformation. A critical phase transformation path for forming nuclei of spinel-like domains within the matrix of the original layered structure is proposed. Formation of defect layered structures during the first charge is shown to manifest in a depression of the voltage profile on the first discharge, providing one possible explanation for the observed voltage fade of the Li-excess materials.
A method reducing carbon dioxide to one or more products may include steps (A) to (C). Step (A) may bubble said carbon dioxide into a solution of an electrolyte and a catalyst in a divided electrochemical cell. The divided electrochemical cell may include an anode in a first cell compartment and a cathode in a second cell compartment. The cathode may reduce said carbon dioxide into said products. Step (B) may adjust one or more of (a) a cathode material, (b) a surface morphology of said cathode, (c) said electrolyte, (d) a manner in which said carbon dioxide is bubbled, (e), a pH level of said solution, and (f) an electrical potential of said divided electrochemical cell, to vary at least one of (i) which of said products is produced and (ii) a faradaic yield of said products. Step (C) may separate said products from said solution.
In this project, we developed the materials platform for a new class of cathode materials suitable for lithium deintercalation/reintercalation, based on Li 8 ZrO 6 (LZO), with or without dopant metals.
An article for forming an electrochemical device is disclosed. The article comprises a metallic current collector clad with an ion conducting solid-electrolyte material such that intimate contact between the current collector and the ion conducting solid-electrolyte material is made. A lithium metal anode can be formed in situ between the current collector clad and the ion conducting solid-electrolyte material from lithium ions contained within a cathode material that is placed in contact with the ion conducting solid-electrolyte material. A bipolar electrochemical cell can be constructed from the article.
A stabilized lithium metal oxide cathode material comprises microparticles of lithium metal oxide in which individual particles thereof a core of lithium metal oxide and a coating of a different lithium metal oxide surrounding the core. There is an interface layer between the cores and the coatings in which there are gradients of metal ions in the direction of coating to core. The materials are made by a three stage process involving coprecipitating precursor metal hydroxide core particles at a controlled pH; coprecipitating a different metal hydroxide coating on the particles without controlling the pH; and then calcining the resulting coated precursor particles with lithium hydroxide to form the stabilized lithium metal oxide material.
A stabilized lithium metal oxide cathode material comprises microparticles of lithium metal oxide in which individual particles thereof a core of lithium metal oxide and a coating of a different lithium metal oxide surrounding the core. There is an interface layer between the cores and the coatings in which there are gradients of metal ions in the direction of coating to core. The materials are made by a three stage process involving coprecipitating precursor metal hydroxide core particles at a controlled pH; coprecipitating a different metal hydroxide coating on the particles without controlling the pH; and then calcining the resulting coated precursor particles with lithium hydroxide to form the stabilized lithium metal oxide material.
Sol–gel synthesis is a wet-chemical processing route for fabricating functional materials with control over composition and microstructure at relatively low temperatures compared to conventional solid-state synthesis. While sol–gel process initiates with intermixed molecular precursors, the early-stage nucleation pathways are insufficiently understood. Here, in this study, the chemical and structural transformation of ion disordered rocksalt (DRX) Li 1.2 Mn 0.4 Ti 0.4 O 2 (LMTO), a promising cathode material for lithium batteries, is studied by multiscale characterizations. In situ heating transmission electron microscopy (TEM) using a liquid cell visualizes and identifies crystallization pathways at the nanoscale. While some regions follow a classical multi-step transition through thermodynamically stable intermediates, others exhibit a kinetic shortcut via a localized amorphous matrix to directly form the DRX structure. Macroscale Fourier transform infrared spectroscopy corroborates the findings and reveals that transition metal ions are more strongly incorporated into the acetate-coordinated network than lithium. Although in situ heating TEM captures diverse local transformation pathways, in situ synchrotron X-ray diffraction indicates that the macroscopic transformation proceeds predominantly through spinel LMTO and lithium titanates toward DRX-LMTO. The findings uncover the spatiotemporal chemical and structural transformations in sol–gel derived DRX-LMTO materials, and call for fine-tuning of such sol–gel chemistries to manipulate the crystallization pathways and achieve target material homogeneity more efficiently.
Energy storage challenges have triggered growing interest in various battery technologies and electrocatalysis. As a particularly promising variety, the Li–O 2 battery with an extremely high energy density is of great significance, offering tremendous opportunities to improve cell performance via understanding catalytic mechanisms and the exploration of new materials. Furthermore, focus on nonaqueous electrolyte–based Li–O 2 batteries has markedly intensified since there could be a higher probability of commercialization, compared to that of solid–state or aqueous electrolytes. The recent advancements of the nonaqueous Li–O 2 battery in terms of fundamental understanding and material challenges, including electrolyte stability, water effect, and noncarbon cathode materials are summarized in this review. Further, the current status of water impact on discharge products, possible mechanisms, and parasitic reactions in nonaqueous electrolytes are reviewed for the first time. The key challenges of noncarbon oxygen electrode materials, such as noble metals and metal oxide–based cathodes, transition metals, transition metal compounds (carbides, oxides) based cathodes as well as noncarbon supported catalysts are discussed. In conclusion, this review concludes with a perspective on future research directions for nonaqueous Li–O 2 batteries.
An experimental investigation was performed in an effort to measure and increase lifetime of electrodes in an arcjet thruster. The electrode erosion of various anode and cathode materials was measured after tests in an atmospheric pressure nitrogen arc discharge at powers less than 1 kW. A free-burning arc configuration and a constricted arc configuration were used to test the materials. Lanthanum hexaboride and thoriated tungsten had low cathode erosion rates while thoriated tungsten and pure tungsten had the lowest anode erosion rates of the materials tested. Anode cooling, reverse gas flow, and external magnetic fields were all found to reduce electrode mass loss.
An experimental investigation was performed in an effort to measure and increase lifetime of electrodes in an arcjet thruster. The electrode erosion of various anode and cathode materials was measured after tests in an atmospheric pressure nitrogen arc discharge at powers less than 1 kW. A free-burning arc configuration and a constricted arc configuration were used to test the materials. Lanthanum hexboride and thoriated tungsten had low cathode erosion rates while thoriated tungsten and pure tungsten had the lowest anode erosion rates of the materials tested. Anode cooling, reverse gas flow, an external magnetic fields were all found to reduce electrode mass loss.
Lithium ion batteries with high energy densities are required to reach DOE’s goal on early commercialization of electrical vehicles, including HEV, PHEV and EV. To increase the energy of cathode, voltage or/and capacity of cathode need to be increased. During FY10, we have investigated cathode materials with high operation voltages, for example LiMnPO4, and renewable organic cathode with high capacities. Environmentally friendly materials and low cost synthesis approaches have been intentionally explored during our efforts.
To gain insight into the Cr poisoning mechanism at the cathode side of solid oxide fuel cells (SOFCs) with stainless steel interconnects, we conducted an investigation of the impact of Cr2O3 overlayers on oxygen diffusion in various SOFC electrolyte and cathode materials. High density Gd0.10Ce0.90O2 (GDC), Y0.15Zr0.85O2 (YSZ) and La0.6Sr0.4Co0.2Fe0.8O2 (LSCF) sintered pellets were covered with 3 to 30 nm Cr - overlayers that were subsequently oxidized, forming Cr2O3. Standard 18O tracer diffusion experiments at 800°C were performed and TOFSIMS profiling revealed a Cr2O3 thickness-dependent oxygen uptake process. The oxygen ion diffusion coefficients were found to be unaffected by the Cr2O3 overlayers, which is predictable since they are a bulk property. The extracted surface exchange coefficients however varied with Cr2O3 overlayer thickness. Solid state reaction measurements of Cr2O3 with the three materials of interest, and electronic structure considerations concerning the surface exchange, led to the conclusion that the observed oxygen uptake hindrance for LSCF and the slight increase of the surface exchange coefficient for YSZ can be attributed to the electronic properties of Cr2O3. The rate limitation of the oxygen incorporation into the materials is therefore strongly dependent on the surface electronic properties. A critical thickness of Cr2O3 was determined where the transition from decreased cathode-performance to a Cr2O3-property-governed regime occurs.
Nickle-rich LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NMC 811) cathode material exhibits engaging properties in high energy density and low cost, making it great potential for the next generation high-energy all-solid-state lithium batteries (ASSLBs). However, NMC 811 suffers from severe surface electrochemical, chemical, and voltage incompatibility towards solid-state electrolytes (SSE), especially thiophosphate-based electrolytes like Li 6 PS 5 Cl. Although diverse coating methods have been made to overcome this issue, they are typically cumbersome and expensive. A coating strategy that satisfied all the requirements of cost-efficiency, stability, uniformity, scalability, and easy-achieving is still challenging. Here, we developed a LiOH-based surface stabilization strategy that provides a ~10 nm stable permeable layer on NMC 811. After one-step sintering of NMC 811 precursor mixed with LiOH, which is commonly used for NMC 811 lithiation process, excessive LiOH simultaneously distributes on NMC 811 particles. Unlike other reported methods, this coating method can be easily controlled and fabricated without additional complicated processes. By simply controlling the thickness of LiOH layer, which protects the Li 6 PS 5 Cl solid electrolyte materials from being oxidized, optimized cycling stability can be obtained for 600 cycles with capacity of 130 mAh g – 1 on average at a wide electrochemical window of 2.50–4.20 V (vs. Li-In).
We report improving sluggish rate performance and cycling stability of Li, Mn-rich cathode materials (LMR) is of great importance for practical implementation. Here, dual surface modification on LMR particles with formic acid washing and spinel coating improves the electrochemical performance. Dilute formic acid can remove the Li2CO3 surface impurities and selectively reduce Ni while significantly increasing specific surface area by ~32 %, unlocking more electrochemically active surfaces. Spinel coating enhances cycle stability by suppressing detrimental side reactions at electrode-electrolyte interfaces at high voltage. Post-annealing temperature was found to significantly affect the cathode performance. Higher temperature favors diffusion of transition metal (TM)/Li ions of the spinel coating from surface to the bulk, removing the coating by possible reconstruction into the layered structure and thus degrading the performance. The spinel coating also appears to increase Co 3+ segregation on the particle surface. Compared to the original material, the optimized sample demonstrates 47 % higher capacity retention at 3C and retains 89 % of initial capacity after 150 cycles at 0.5C. Besides, the specific energy density of 523 Wh kg -1 can be attained after 150 cycles at 0.5C. Moreover, the post-cycling analysis of modified sample verifies a better structural integrity with less particle cracking. Altogether, this study portrays an alternative strategy to overcome the shortcomings of LMR cathode materials.
We report that layered metal oxides have been widely used as the best cathode materials for commercial lithium-ion batteries and are being intensively explored for sodium-ion batteries. However, their application to potassium-ion batteries (PIBs) is hampered because of the poor cycling stability and low rate capability due to the larger ionic size of K + than of Li + or Na + . Herein, a facile self-templated strategy was used to synthesize unique P2-type K 0.6 CoO 2 microspheres that consist of aggregated primary nanoplates as PIB cathodes. The unique K 0.6 CoO 2 microspheres with aggregated structure significantly enhanced the kinetics of the K + intercalation/deintercation and also minimized the parasitic reactions between the electrolyte and K 0.6 CoO 2 . The P2-K 0.6 CoO 2 microspheres demonstrated a high reversible capacity of 82 mAh g –1 at 10 mA g –1 , high rate capability of 65 mAh g –1 at 100 mA g –1 , and long cycle life (87% capacity retention over 300 cycles). The high reversibility of the P2-K 0.6 CoO 2 full cell paired with a hard carbon anode further demonstrated the feasibility of PIBs. Lastly, this work not only successfully demonstrates exceptional performance of P2-type K 0.6 CoO 2 cathodes and microspheres K 0.6 CoO 2 ∥hard carbon full cells, but also provides new insights into the exploration of other layered metal oxides for PIBs.
This study sheds the lights on current and future recycling methods for spent Li-ion batteries from retired vehicles. The demands of Li-ion batteries for automotive applications and power electronics are expected to increase significantly in the next 15-20 years. Recycling cathode materials from the end of life batteries is not only providing a sustainable source of materials, but also offers an economic alternative to some of the high value elements such as cobalt and nickel. Insights and directions for future R&D will be presented in this paper based on the results of the supply chain and techno-economic analyses made for end-of-life li-ion batteries.