Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud platform”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,030 records · Page 58

Adoption of High Performance Computational (HPC) Modeling Software for Widespread Use in the Manufacture of Welded Structures

This report summarizes the final product developed for the US DOE Small Business Innovation Research (SBIR) Phase II grant made to Engineering Mechanics Corporation of Columbus (Emc 2 ) between April 16, 2014 and August 31, 2016 titled ‘Adoption of High Performance Computational (HPC) Modeling Software for Widespread Use in the Manufacture of Welded Structures’. Many US companies have moved fabrication and production facilities off shore because of cheaper labor costs. A key aspect in bringing these jobs back to the US is the use of technology to render US-made fabrications more cost-efficient overall with higher quality. One significant advantage that has emerged in the US over the last two decades is the use of virtual design for fabrication of small and large structures in weld fabrication industries. Industries that use virtual design and analysis tools have reduced material part size, developed environmentally-friendly fabrication processes, improved product quality and performance, and reduced manufacturing costs. Indeed, Caterpillar Inc. (CAT), one of the partners in this effort, continues to have a large fabrication presence in the US because of the use of weld fabrication modeling to optimize fabrications by controlling weld residual stresses and distortions and improving fatigue, corrosion, and fracture performance. This report describes Emc 2 ’s DOE SBIR Phase II final results to extend an existing, state-of-the-art software code, Virtual Fabrication Technology (VFT®), currently used to design and model large welded structures prior to fabrication - to a broader range of products with widespread applications for small and medium-sized enterprises (SMEs). VFT® helps control distortion, can minimize and/or control residual stresses, control welding microstructure, and pre-determine welding parameters such as weld-sequencing, pre-bending, thermal-tensioning, etc. VFT® uses material properties, consumable properties, etc. as inputs. Through VFT®, manufacturing companies can avoid costly design changes after fabrication. This leads to the concept of joint design/fabrication where these important disciplines are intimately linked to minimize fabrication costs. Finally service performance (such as fatigue, corrosion, and fracture/damage) can be improved using this product. Emc 2 ’s DOE SBIR Phase II effort successfully adapted VFT® to perform efficiently in an HPC environment independent of commercial software on a platform to permit easy and cost effective access to the code. This provides the key for SMEs to access this sophisticated and proven methodology that is quick, accurate, cost effective and available “on-demand” to address weld-simulation and fabrication problems prior to manufacture. In addition, other organizations, such as Government agencies and large companies, may have a need for spot use of such a tool. The open source code, WARP3D, a high performance finite element code used in fracture and damage assessment of structures, was significantly modified so computational weld problems can be solved efficiently on multiple processors and threads with VFT®. The thermal solver for VFT®, based on a series of closed form solution approximations, was extensively enhanced for solution on multiple processors greatly increasing overall speed. In addition, the graphical user interface (GUI) was re-written to permit SMEs access to an HPC environment at the Ohio Super Computer Center (OSC) to integrate these solutions with WARP3D. The GUI is used to define all weld pass descriptions, number of passes, material properties, consumable properties, weld speed, etc. for the structure to be modeled. The GUI was enhanced to make it more user-friendly so that non-experts can perform weld modeling. Finally, an extensive outreach program to market this capability to fabrication companies was performed. This access will permit SMEs to perform weld modeling to improve their competitiveness at a reasonable cost.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Cloud Absorption Radiometer Autonomous Navigation System - CANS

CAR (cloud absorption radiometer) acquires spatial reference data from host aircraft navigation systems. This poses various problems during CAR data reduction, including navigation data format, accuracy of position data, accuracy of airframe inertial data, and navigation data rate. Incorporating its own navigation system, which included GPS (Global Positioning System), roll axis inertia and rates, and three axis acceleration, CANS expedites data reduction and increases the accuracy of the CAR end data product. CANS provides a self-contained navigation system for the CAR, using inertial reference and GPS positional information. The intent of the software application was to correct the sensor with respect to aircraft roll in real time based upon inputs from a precision navigation sensor. In addition, the navigation information (including GPS position), attitude data, and sensor position details are all streamed to a remote system for recording and later analysis. CANS comprises a commercially available inertial navigation system with integral GPS capability (Attitude Heading Reference System AHRS) integrated into the CAR support structure and data system. The unit is attached to the bottom of the tripod support structure. The related GPS antenna is located on the P-3 radome immediately above the CAR. The AHRS unit provides a RS-232 data stream containing global position and inertial attitude and velocity data to the CAR, which is recorded concurrently with the CAR data. This independence from aircraft navigation input provides for position and inertial state data that accounts for very small changes in aircraft attitude and position, sensed at the CAR location as opposed to aircraft state sensors typically installed close to the aircraft center of gravity. More accurate positional data enables quicker CAR data reduction with better resolution. The CANS software operates in two modes: initialization/calibration and operational. In the initialization/calibration mode, the software aligns the precision navigation sensors and initializes the communications interfaces with the sensor and the remote computing system. It also monitors the navigation data state for quality and ensures that the system maintains the required fidelity for attitude and positional information. In the operational mode, the software runs at 12.5 Hz and gathers the required navigation/attitude data, computes the required sensor correction values, and then commands the sensor to the required roll correction. In this manner, the sensor will stay very near to vertical at all times, greatly improving the resulting collected data and imagery. CANS greatly improves quality of resulting imagery and data collected. In addition, the software component of the system outputs a concisely formatted, high-speed data stream that can be used for further science data processing. This precision, time-stamped data also can benefit other instruments on the same aircraft platform by providing extra information from the mission flight.

Kahle, Duncan↗

NEON AOP Survey of Upper East River CO Watersheds: LAZ Files, LiDAR Surface Elevation, Terrain Elevation, and Canopy Height Rasters

Lawrence Berkeley National Laboratory (LBNL) contracted the National Ecological Observatory Network Airborne Observation Platform (NEON AOP) to observe watersheds of interest surrounding Crested Butte, CO with remotely sensed data, including LiDAR. The flight box design encompassed the watersheds, surveying a total area of 334 km2 across 72 lines. The instrument used was an Optech Gemini, with a pulse density of 2-9 pulses m-2 across the study area (see final report document for detailed information (Goulden and Musinsky 2020). These LiDAR data are the primary data that were provided by NEON, and include both LiDAR source data and derived surface products. The source data are contained in 'crbu_laz.zip' and 'classified_point_cloud.zip. 'classified_point_cloud.zip' represents an additional processing level on 'crbu_laz.zip'. The derived products are 'dsm_mosaic_min_phase_me.tif', 'dtm_mosaic_min_phase_me.tif', and 'tch_mosaic_min_phase_me.tif'. These files are raster mosaics of a digital surface elevation model (DSM), digital terrain elevation model (DTM), and a canopy height model (CHM) at 1 m resolution with a height threshold of > 2 m, respectively, in geotiff (.tif) format. This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231. [UPDATE] On 06/26/2026 the files 'crbu_laz.zip' and 'classified_point_cloud.zip' were replaced with original output files from NEON to address zip file corruption and naming errors. No changes were made to the underlying data. (See Methods Step 2 for details).

2018 NEON and 2025 CHESS Campaigns↗

Mass Inferencing Model Creation and Deployment to the RASSOR Lunar Excavation Robot

The Regolith Advanced Surface Systems Operations Robot (RASSOR) Excavator is a teleoperated mobile robotic platform with a unique space regolith excavation capability. The Intelligent Capabilities Enhanced RASSOR research project developed functionality for inferencing regolith mass ingested during RASSOR operation, enhancing RASSOR’s ability to successfully complete ISRU missions. To teleoperate or run autonomously, it is crucial for the quantity of regolith mass ingested by RASSOR to be available as a system state for efficient operation. For example, during autonomous operation, RASSOR should navigate and move to a processing plant to offload the collected regolith when the drums are full; without knowledge of how much mass is in the drums, this type of high-level planning is not possible. Four distinct modeling approaches were employed in developing a mass inferencing approach that could work on RASSOR. All take in system states, such as arm/drum positions, velocities, currents, voltages, and robot pose, and output a mass prediction for each set of the robot’s bucket drums.1) A neural network model that takes a vector of normalized system states; 2) A model that uses the integrated power consumption of an arm-raise (normalized by velocity); 3) A model that uses average drum current over a variable length interval of the drum disengaged from the surface; and 4) A real-time estimation model that aggregates excavation drum current. The developed models run in real time, outputting predictions for the front and rear drums, timestamp of the last prediction, and total mass in RASSOR’s drums. Further testing is required to validate the arm-raise model (2), though initial tests indicate reasonable performance (<10% mean error) on the hardware. The linear fit of average drum-current model (3) had a front value of r^2=0.99 and a rear value of r^2=0.98 on the validation dataset. This model currently has the best performance on unseen data. The real time model (4) is still in development, though initial results on a small subset of the training data show that it has high accuracy in predicting the increase in mass during excavation. Though work remains to be done with deploying a high-fidelity model to the physical system that makes predictions with error below the desired threshold, the modular architecture for model development allows quick adjustment of parameters to increase model fidelity. This architecture can also be adapted to use lunar excavation data to create models that are reflective of RASSOR’s dynamics when operating on the lunar surface. The results are promising as it has been shown that models can be developed that accurately estimate excavated regolith mass.

rassor↗