Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud type”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

A high resolution liquid xenon imaging telescope for 0.3-10 MeV gamma-ray astrophysics: Construction and initial balloon flights

An instrument is described which will provide a direct image of gamma-ray line or continuum sources in the energy range 300 keV to 10 MeV. The use of this instrument to study the celestial distribution of the (exp 26)Al isotope by observing the 1.809 MeV deexcitation gamma-ray line is illustrated. The source location accuracy is 2' or better. The imaging telescope is a liquid xenon time projection chamber coupled with a coded aperture mask (LXe-CAT). This instrument will confirm and extend the COMPTEL observations from the Compton Gamma-Ray Observatory (CGRO) with an improved capability for identifying the actual Galactic source or sources of (exp 26)Al, which are currently not known with certainty. sources currently under consideration include red giants on the asymptotic giant branch (AGB), novae, Type 1b or Type 2 supernovae, Wolf-Rayet stars and cosmic-rays interacting in molecular clouds. The instrument could also identify a local source of the celestial 1.809 MeV gamma-ray line, such as a recent nearby supernova.

Aprile, Elena↗

The very soft X-ray emission of X-ray-faint early-type galaxies

A recent reanaylsis of Einstein data, and new ROSAT observations, have revealed the presence of at least two components in the X-ray spectra of X-ray faint early-type galaxies: a relatively hard component (kT greater than 1.5 keV), and a very soft component (kT approximately 0.2-0.3 keV). In this paper we address the problem of the nature of the very soft component and whether it can be due to a hot interstellar medium (ISM), or is most likely originated by the collective emission of very soft stellar sources. To this purpose, hydrodynamical evolutionary sequences for the secular behavior of gas flows in ellipticals have been performed, varying the Type Ia supernovae rate of explosion, and the dark matter amount and distribution. The results are compared with the observational X-ray data: the average Einstein spectrum for six X-ray faint early-type galaxies (among which are NGC 4365 and NGC 4697), and the spectrum obtained by the ROSAT pointed observation of NGC 4365. The very soft component could be entirely explained with a hot ISM only in galaxies such as NGC 4697, i.e., when the depth of the potential well-on which the average ISM temperature strongly depends-is quite shallow; in NGC 4365 a diffuse hot ISM would have a temperature larger than that of the very soft component, because of the deeper potential well. So, in NGC 4365 the softest contribution to the X-ray emission comes certainly from stellar sources. As stellar soft X-ray emitters, we consider late-type stellar coronae, supersoft sources such as those discovered by ROSAT in the Magellanic Clouds and M31, and RS CVn systems. All these candidates can be substantial contributors to the very soft emission, though none of them, taken separately, plausibly accounts entirely for its properties. We finally present a model for the X-ray emission of NGC 4365, to reproduce in detail the results of the ROSAT pointed observation, including the Position Sensitive Proportional Counter (PSPC) spectrum and radial surface brightness distribution. The present data may suggest that the X-ray surface brightness is more extended than the optical profile. In this case, a straightforward explanation in terms of stellar sources could not be satisfactory. The available data can be better explained with three different contributions: a very soft component of stellar origin, a hard component from X-ray binaries, and an approximately 0.6 keV hot ISM. The latter can explain the extended X-ray surface brightness profile, if the galaxy has a dark-to-luminous mass ratio of 9, with the dark matter very broadly distributed, and a SN Ia explosive rate of approximately 0.6 the Tammann rate.

Pellegrini, S.↗

Top-of-Atmosphere Shortwave Broadband Observed Radiance and Estimated Irradiance over Polar Regions from Clouds and the Earth's Radiant Energy System (CERES) Instruments on Terra

Empirical angular distribution models for estimating top-of-atmosphere shortwave irradiances from radiance measurements over permanent snow, fresh snow and sea ice are developed using CERES measurements on Terra. Permanent snow angular distribution models depend on cloud fraction, cloud optical thickness, and snow brightness. Fresh snow and sea ice angular distribution models depend on snow and sea ice fraction, cloud fraction, cloud optical thickness, and snow and ice brightness. These classifications lead to 10 scene types for permanent snow and 25 scene types for fresh snow and sea ice. The average radiance over clear-sky permanent snow is more isotropic with satellite viewing geometry than that over overcast permanent snow. On average, the albedo of clear-sky permanent snow varies from 0.65 to 0.68 for solar zenith angles between 60$logical and\circ$ and 80 deg, while the corresponding albedo of overcast scenes varies from 0.70 to 0.73. Clear-sky permanent snow albedos over Antarctica estimated from two independent angular distribution models are consistent to within 0.6%, on average. Despite significant variability in sea ice optical properties with season, the estimated mean relative albedo error is -1 % for very dark sea ice and 0.1% for very bright sea ice when albedos derived from different viewing angles are averaged. The estimated regional root-mean-square (RMS) relative albedo error is 5.6% and 2.6% when the sea ice angular distribution models are applied to a region that contains very dark and very bright sea ice, respectively. Similarly, the estimated relative albedo bias error for fresh snow is -0.1% for very dark snow.

Kato, S.↗

Cost Analysis in a Multi-Mission Operations Environment

Spacecraft control centers have evolved from dedicated, single-mission or single mission-type support to multi-mission, service-oriented support for operating a variety of mission types. At the same time, available money for projects is shrinking and competition for new missions is increasing. These factors drive the need for an accurate and flexible model to support estimating service costs for new or extended missions; the cost model in turn drives the need for an accurate and efficient approach to service cost analysis. The National Aeronautics and Space Administration (NASA) Huntsville Operations Support Center (HOSC) at Marshall Space Flight Center (MSFC) provides operations services to a variety of customers around the world. HOSC customers range from launch vehicle test flights; to International Space Station (ISS) payloads; to small, short duration missions; and has included long duration flagship missions. The HOSC recently completed a detailed analysis of service costs as part of the development of a complete service cost model. The cost analysis process required the team to address a number of issues. One of the primary issues involves the difficulty of reverse engineering individual mission costs in a highly efficient multi-mission environment, along with a related issue of the value of detailed metrics or data to the cost model versus the cost of obtaining accurate data. Another concern is the difficulty of balancing costs between missions of different types and size and extrapolating costs to different mission types. The cost analysis also had to address issues relating to providing shared, cloud-like services in a government environment, and then assigning an uncertainty or risk factor to cost estimates that are based on current technology, but will be executed using future technology. Finally the cost analysis needed to consider how to validate the resulting cost models taking into account the non-homogeneous nature of the available cost data and the decreasing flight rate. This paper presents the issues encountered during the HOSC cost analysis process, and the associated lessons learned. These lessons can be used when planning for a new multi-mission operations center or in the transformation from a dedicated control center to multi-center operations, as an aid in defining processes that support future cost analysis and estimation. The lessons can also be used by mature service-oriented, multi-mission control centers to streamline or refine their cost analysis process.

Felton, Larry↗

Cost Analysis In A Multi-Mission Operations Environment

Spacecraft control centers have evolved from dedicated, single-mission or single missiontype support to multi-mission, service-oriented support for operating a variety of mission types. At the same time, available money for projects is shrinking and competition for new missions is increasing. These factors drive the need for an accurate and flexible model to support estimating service costs for new or extended missions; the cost model in turn drives the need for an accurate and efficient approach to service cost analysis. The National Aeronautics and Space Administration (NASA) Huntsville Operations Support Center (HOSC) at Marshall Space Flight Center (MSFC) provides operations services to a variety of customers around the world. HOSC customers range from launch vehicle test flights; to International Space Station (ISS) payloads; to small, short duration missions; and has included long duration flagship missions. The HOSC recently completed a detailed analysis of service costs as part of the development of a complete service cost model. The cost analysis process required the team to address a number of issues. One of the primary issues involves the difficulty of reverse engineering individual mission costs in a highly efficient multimission environment, along with a related issue of the value of detailed metrics or data to the cost model versus the cost of obtaining accurate data. Another concern is the difficulty of balancing costs between missions of different types and size and extrapolating costs to different mission types. The cost analysis also had to address issues relating to providing shared, cloud-like services in a government environment, and then assigning an uncertainty or risk factor to cost estimates that are based on current technology, but will be executed using future technology. Finally the cost analysis needed to consider how to validate the resulting cost models taking into account the non-homogeneous nature of the available cost data and the decreasing flight rate. This paper presents the issues encountered during the HOSC cost analysis process, and the associated lessons learned. These lessons can be used when planning for a new multi-mission operations center or in the transformation from a dedicated control center to multi-center operations, as an aid in defining processes that support future cost analysis and estimation. The lessons can also be used by mature serviceoriented, multi-mission control centers to streamline or refine their cost analysis process.

Newhouse, M.↗

Neptune Long-Lived Atmospheric Features in 2013 - 2015 from Small (28-cm) to Large (10-m) Telescopes

Since 2013, observations of Neptune with small telescopes (28-50 cm) have resulted in several detections of long-lived bright atmospheric features that have also been observed by large telescopes such as Keck II or Hubble. The combination of both types of images allows the study of the long-term evolution of major cloud systems in the planet. In 2013 and 2014 two bright features were present on the planet at southern mid-latitudes. These may have merged in late 2014, possibly leading to the formation of a single bright feature observed during 2015 at the same latitude. This cloud system was first observed in January 2015 and nearly continuously from July to December 2015 in observations with telescopes in the 2-10-m class and in images from amateur astronomers. These images show the bright spot as a compact feature at −40.1 +/- 1.6 deg planetographic latitude well resolved from a nearby bright zonal band that extended from −42 deg to −20 deg. The size of this system depends on wavelength and varies from a longitudinal extension of 8000 +/- 900 km and latitudinal extension of 6500 +/- 900 km in Keck II images in H and Ks bands to 5100 +/- 1400 km in longitude and 4500 +/- 1400 km in latitude in HST images in 657 nm. Over July to September 2015 the structure drifted westward in longitude at a rate of 24.48 +/- 0.03 deg/day or −94 +/- 3 m/s. This is about 30 m/s slower than the zonal winds measured at the time of the Voyager 2 flyby. Tracking its motion from July to November 2015 suggests a longitudinal oscillation of 16 deg in amplitude with a 90-day period, typical of dark spots on Neptune and similar to the Great Red Spot oscillation in Jupiter. The limited time covered by high-resolution observations only covers one full oscillation and other interpretations of the changing motions could be possible. HST images in September 2015 show the presence of a dark spot at short wavelengths located in the southern flank (planetographic latitude −47.0 deg) of the bright compact cloud observed throughout 2015. The drift rate of the bright cloud and dark spot translates to a zonal speed of −87.0 +/- 2.0 m/s, which matches the Voyager 2 zonal speeds at the latitude of the dark spot. Identification of a few other features in 2015 enabled the extraction of some limited wind information over this period. This work demonstrates the need of frequently monitoring Neptune to understand its atmospheric dynamics and shows excellent opportunities for professional and amateur collaborations.

dynamics↗

Polar stratospheric clouds and ozone depletion

A review is presented of investigations into the correlation between the depletion of ozone and the formation of polar stratospheric clouds (PSCs). Satellite measurements from Nimbus 7 showed that over the years the depletion from austral spring to austral spring has generally worsened. Approximately 70 percent of the ozone above Antarctica, which equals about 3 percent of the earth's ozone, is lost during September and October. Various hypotheses for ozone depletion are discussed including the theory suggesting that chlorine compounds might be responsible for the ozone hole, whereby chlorine enters the atmosphere as a component of chlorofluorocarbons produced by humans. The three types of PSCs, nitric acid trihydrate, slowly cooling water-ice, and rapidly cooling water-ice clouds act as important components of the Antarctic ozone depletion. It is indicated that destruction of the ozone will be more severe each year for the next few decades, leading to a doubling in area of the Antarctic ozone hole.

Toon, Owen B.↗

“Evaluation of boundary layer cloud processes in an advanced parameterization for global models” (Final Report)

Low clouds over the ocean are a critical component of our planet’s energy budget because they emit almost as much energy as the surface while being much more reflective than the ocean, resulting in a strong net cooling effect. Despite their importance, low marine clouds remain a persistent source of uncertainty in future climate projections. This project explored how the dynamics, thermodynamics and spatial organization of low clouds is represented in a particular physical simplification, or parameterization, of small-scale air motions and cloud processes commonly employed in global atmospheric models used for short-term weather and longer-term earth system prediction. The overall goal was to develop long-term observational products to constrain numerical model representations of turbulence and cloud processes using observations from the US Department of Energy’s (DOE) Atmospheric Radiation Measurement (ARM) program’s Eastern North Atlantic (ENA) site. These constraints were then used to demonstrate the type of information that can be gained from confronting simulations with the observations and we assessed the performance of a parameterization in simulating periods of low clouds at ENA. Finally, we used detailed computational fluid dynamics simulations of turbulence and cloud properties to evaluate general physical assumptions embedded in simplified representations of clouds and turbulence for global models of the atmosphere.

54 ENVIRONMENTAL SCIENCES↗

Evaluation of Intercomparisons of Four Different Types of Model Simulating TWP-ICE

Four model intercomparisons were run and evaluated using the TWP-ICE field campaign, each involving different types of atmospheric model. Here we highlight what can be learnt from having single-column model (SCM), cloud-resolving model (CRM), global atmosphere model (GAM) and limited-area model (LAM) intercomparisons all based around the same field campaign. We also make recommendations for anyone planning further large multi-model intercomparisons to ensure they are of maximum value to the model development community. CRMs tended to match observations better than other model types, although there were exceptions such as outgoing long-wave radiation. All SCMs grew large temperature and moisture biases and performed worse than other model types for many diagnostics. The GAMs produced a delayed and significantly reduced peak in domain-average rain rate when compared to the observations. While it was shown that this was in part due to the analysis used to drive these models, the LAMs were also driven by this analysis and did not have the problem to the same extent. Based on differences between the models with parametrized convection (SCMs and GAMs) and those without (CRMs and LAMs), we speculate that that having explicit convection helps to constrain liquid water whereas the ice contents are controlled more by the representation of the microphysics.

convection↗

Extending XBAER Algorithm to Aerosol and Cloud Condition

The retrieval of cloud optical properties for aerosol contaminated water cloud is challenging because of the complexity of physical processes in such situations. Conventionally, cloud optical data products are typically derived, ignoring the aerosol impacts on radiative transfer in the retrieval process. This is potentially a significant source of error. In this paper, the eXtensible Bremen Aerosol Retrieval (XBAER) algorithm has been optimized for the retrieval of aerosol/cloud properties for the aerosol contaminated cloud (ACC) scenarios. This version of XBAER delivers cloud optical thickness (COT) and cloud effective radius (CER) for ACCs and simultaneously retrieves aerosol optical thickness (AOT). The surface parameterization and aerosol types used in the standard XBAER algorithm have been adapted in this retrieval to account for the ACC conditions. Aerosol types in XBAER for the retrieval of ACC scenarios have been parameterized to comprise weak and strong absorptions. The comparisons of COT, CER, and AOT retrieved using this adapted XBAER algorithm and two new NASA algorithms show good agreements, especially for biomass burning aerosol. The correlation coefficients are >0.9 for AOT, ~0.8 for CER, and ~0.7 for COT. There is also a good agreement for dust plume contaminated cloud scene. The XBAER derived AOT values for dust aerosols are systematically smaller than the NASA retrieval, but both products have the same spatial distribution patterns. The comparison of COT retrieved using the adapted XBAER algorithm and that retrieved from ground-based microwave radiometer (MWR) measurements shows much better agreement for ACC conditions with high AOT.

satellite↗

High Resolution Measurements and Modeling in the Arctic

This report details the activity of the project, "High Resolution Modeling and Measurements in the Arctic" spanning Fiscal Years 2016 - 2018 supported by the Sandia National Laboratories Laboratory Directed Research and Development (LDRD) program. The project's primary goal was to test the hypothesis that global climate model bias of low boundary layer clouds lacking liquid water in the Arctic could be improved by increasing horizontal resolution in the model. As model resolution is constrained by computational resources, four different model types were explored and compared to test the project's primary theory. Given the Arctic is a data-sparse region lacking robust data sets of liquid water in clouds, this project also obtained in situ measurements of low clouds with sensors on a tethered balloon system to constrain and compare with the models. Although other model biases remained, the liquid water path generally increased with resolution, supporting the original hypothesis.

54 ENVIRONMENTAL SCIENCES↗

Application of High-Dimensional Fuzzy K-Means Cluster Analysis to CALIOP/CALIPSO Version 4.1 Cloud-Aerosol Discrimination

This study applies fuzzy k-means (FKM) cluster analyses to a subset of the parameters reported in the CALIPSO lidar level 2 data products in order to classify the layers detected as either clouds or aerosols. The results obtained are used to assess the reliability of the cloud–aerosol discrimination (CAD) scores reported in the version 4.1 release of the CALIPSO data products. FKM is an unsupervised learning algorithm, whereas the CALIPSO operational CAD algorithm (COCA) takes a highly supervised approach. Despite these substantial computational and architectural differences, our statistical analyses show that the FKM classifications agree with the COCA classifications for more than 94 % of the cases in the troposphere. This high degree of similarity is achieved because the lidar-measured signatures of the majority of the clouds and the aerosols are naturally distinct, and hence objective methods can independently and effectively separate the two classes in most cases. Classification differences most often occur in complex scenes (e.g., evaporating water cloud filaments embedded in dense aerosol) or when observing diffuse features that occur only intermittently (e.g., volcanic ash in the tropical tropopause layer). The two methods examined in this study establish overall classification correctness boundaries due to their differing algorithm uncertainties. In addition to comparing the outputs from the two algorithms, analysis of sampling, data training, performance measurements, fuzzy linear discriminants, defuzzification, error propagation, and key parameters in feature type discrimination with the FKM method are further discussed in order to better understand the utility and limits of the application of clustering algorithms to space lidar measurements. In general, we find that both FKM and COCA classification uncertainties are only minimally affected by noise in the CALIPSO measurements, though both algorithms can be challenged by especially complex scenes containing mixtures of discrete layer types. Our analysis results show that attenuated backscatter and color ratio are the driving factors that separate water clouds from aerosols; backscatter intensity, depolarization, and mid-layer altitude are most useful in discriminating between aerosols and ice clouds; and the joint distribution of backscatter intensity and depolarization ratio is critically important for distinguishing ice clouds from water clouds.

Zeng, Shan↗

Measurements of Cumulonimbus Clouds using quantitative satellite and radar data

Results are reported for a preliminary study of SMS-2 digital brightness and IR data obtained at frequent 5-7.5 min intervals. The clouds studied were over the Central and Great Plains in midlatitudes and thus were typical of an environment much different from that of the tropical oceans. The satellite data are compared to radar data for both a severe weather event and weak thundershower activity of the type which might be a target for weather modification efforts. The relative importance of short time interval satellite data is shown for both cases, and possible relationships between the two types of data are presented. It is concluded that (1) using a threshold technique for visible reflected brightness, precipitating vs. nonprecipitating clouds can be discriminated; (2) brightness is well related to cloud size and shape; and (3) satellite-derived growth rates may be a significant parameter to be used in determining storm severity, especially if rapid time sequence data are used during the development phase of the storm.

Negri, A. J.↗

Org Areo Boreal Forest Sources, compositions and properties of newly formed and regional organic aerosol in a boreal forest during the Biogenic Aerosol: Effects on Clouds and Climate Campaign

The major goals of this project were to make unique measurements, as part of the DOE sponsored Biogenic Aerosol Effects on Clouds and Climate (BAECC) campaign, of the volatility and molecular composition of organic aerosol, as well as gas-phase concentrations of oxygenated organic compounds that interact and affect organic aerosol. In addition, we aimed to conduct a similar set of measurements as part of a collaborative set of environmental simulation chamber experiments at PNNL, the aim of which was to simulate the atmospheric oxidation of key biogenic volatile organic compounds (BVOC) and study the associated formation and evolution of secondary organic aerosol (SOA). The target BVOC were a set of monoterpenes, isoprene, and related intermediates such as IEPOX. The ultimate goal of such measurements are to develop a more detailed mechanistic understanding of the sensitivity of SOA mass formation and lifetime to precursor and environmental conditions. Molecular composition and direct volatility measurements provide robust tracers of chemical processing and properties. As such, meeting these goals will allow for stronger constraints on the types of processes and their fundamental descriptions needed to simulate aerosol particle number and size, and cloud nucleating ability in regional and global earth system models.

54 ENVIRONMENTAL SCIENCES↗

Lidar Simulations of Backscatter and Extinction Uncertainty Estimates for ACCP Assessments

As part of the NASA Aerosols and Clouds, Convection, and Precipitation (ACCP) pre-formulation study, several lidar instruments are being assessed for their capabilities in advancing the science objectives enumerated in the most recent Earth Sciences Decadal Survey. These assessments are conducted using the NASA Langley Research Center(LaRC) lidar simulator, which produces profiles of backscatter and extinction uncertainty estimates for a given set of input parameters. Specifically, attention is focused onevaluating the science benefits and improvements of a candidate two-wavelength space-based High Spectral Resolution Lidar (HSRL) compared to an elastic backscatter lidar with similar capabilities to the Cloud-Aerosol Lidar with Orthogonal Polarization(CALIOP), flying aboard the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) satellite. In this talk, simulations of satellite-based HSRL and those of a CALIOP-like system are compared for different atmospheric scenes that capture varying total aerosol loadings, aerosol vertical distributions, and aerosol types.The results of these analyses are presented as functions of averaging resolution(horizontal/vertical), lighting conditions (daytime/nighttime), surface type (land/ocean),and wavelength (532 nm/1064 nm). Also, simulations of multiple aerosol layers and of aerosols beneath transparent cirrus clouds are shown to demonstrate the consequent impacts on underlying backscatter and extinction uncertainties, and to better differentiate the performance of HSRL compared to that of CALIOP for real-world atmospheric scenarios.

Travis D. Toth↗

Merging AVHRR and SMMR data for remote sensing of ice and cloud in polar regions

Multispectral data from the Advanced Very High Resolution Radiometer (AVHRR) were digitally processed and merged with Scanning Multichannel Microwave Radiometer (SMMR) imagery. Five channels of AVHRR data, four channels of SMRR brightness temperatures and SMMR-derived ice concentration and ice type were co-registered to a polar stereographic grid. The merged data sets are currently being used in combination with meteorological information for integrated studies of clouds and sea ice.

Maslanik, J. A.↗

Influence of the Saharan Air Layer on Hurricane Nadine (2012). Part I: Observations from the Hurricane and Severe Storm Sentinel (HS3) Investigation and Modeling Results

This study uses a model with aerosol–cloud–radiation coupling to examine the impact of Saharan dust and other aerosols on Hurricane Nadine (2012). To study aerosol direct (radiation) and indirect (cloud microphysics) effects from individual, as well as all aerosol species, eight different NU-WRF Model simulations were conducted. In several simulations, aerosols led to storm strengthening, followed by weakening relative to the control simulation. This variability of the aerosol impact may be related to whether aerosols are ingested into clouds within the outer rainbands or the eyewall. Upper-tropospheric aerosol concentrations indicate vertical transport of all aerosol types in the outer bands but only vertical transport of sea salt in the inner core. The results suggest that aerosols, particularly sea salt, may have contributed to a stronger initial intensification but that aerosol ingestion into the outer bands at later times may have weakened the storm in the longer term. In most aerosol experiments, aerosols led to a reduction in cloud and precipitation hydrometeors, the exception being the dust-only case that produced periods of enhanced hydrometeor growth. The Saharan air layer (SAL) also impacted Nadine by causing a region of strong easterlies impinging on the eastern side of the storm. At the leading edge of these easterlies, cool and dry air near the top of the SAL was being ingested into the outer-band convection. This midlevel low-equivalent-potential-temperature air gradually lowered toward the surface and eventually contributed to significant cold-pool activity in the eastern rainband and in the northeast quadrant of the storm. Such enhanced downdraft activity could have led to weakening of the storm, but it is not presently possible to quantify this impact.

Jainn J. Shi↗

A model predicting the evolution of ice particle size spectra and radiative properties of cirrus clouds. Part 2: Dependence of absorption and extinction on ice crystal morphology

This study builds upon the microphysical modeling described in Part 1 by deriving formulations for the extinction and absorption coefficients in terms of the size distribution parameters predicted from the micro-physical model. The optical depth and single scatter albedo of a cirrus cloud can then be determined, which, along with the asymmetry parameter, are the input parameters needed by cloud radiation models. Through the use of anomalous diffraction theory, analytical expressions were developed describing the absorption and extinction coefficients and the single scatter albedo as functions of size distribution parameters, ice crystal shapes (or habits), wavelength, and refractive index. The extinction coefficient was formulated in terms of the projected area of the size distribution, while the absorption coefficient was formulated in terms of both the projected area and mass of the size distribution. These properties were formulated as explicit functions of ice crystal geometry and were not based on an 'effective radius.' Based on simulations of the second cirrus case study described in Part 1, absorption coefficients predicted in the near infrared for hexagonal columns and rosettes were up to 47% and 71% lower, respectively, than absorption coefficients predicted by using equivalent area spheres. This resulted in single scatter albedos in the near-infrared that were considerably greater than those predicted by the equivalent area sphere method. Reflectances in this region should therefore be underestimated using the equivalent area sphere approach. Cloud optical depth was found to depend on ice crystal habit. When the simulated cirrus cloud contained only bullet rosettes, the optical depth was 142% greater than when the cloud contained only hexagonal columns. This increase produced a doubling in cloud albedo. In the near-infrared (IR), the single scatter albedo also exhibited a significant dependence on ice crystal habit. More research is needed on the geometrical properties of ice crystals before the influence of ice crystal shape on cirrus radiative properties can be adequately understood. This study provides a way of coupling the radiative properties of absorption, extinction, and single scatter albedo to the microphysical properties of cirrus clouds. The dependence of extinction and absorption on ice crystal shape was not just due to geometrical differences between crystal types, but was also due to the effect these differences had on the evolution of ice particle size spectra. The ice particle growth model in Part 1 and the radiative properties treated here are based on analytical formulations, and thus represent a computationally efficient means of modeling the microphysical and radiative properties of cirrus clouds.

Mitchell, David L.↗