Search NASA⌕ Search

SEARCH · Search NASA

Results for “composite structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Laser Ablation Surface Treatment of Structural Aerospace Composites and Metal Alloys for Adhesive Bonding

NASA Langley Research Center (LaRC) has been involved over the past decade in the development of laser ablation as a method to surface treat aerospace structural fiber reinforced composites (CFRPs) and metal alloys. [1- 18] Laser surface treatment has been shown to be a rapid, high precision, and reproducible method for surface treatment of these materials, and is amenable to automation. The laser ablation process removes surface contamination such as silicones, creates surface roughness, and chemically activates a surface for bonding. The degree of ablation is controllable by adjusting laser parameters. In the case of CFRPs, ablation can be performed without damage to any underlying carbon fibers. In the case of metal alloys, ablation is possible without surface embrittlement, heat damage or creation of undesirable grain structures or morphologies. The optimum laser treatment conditions are substrate dependent and generally are influenced by laser wavelength and pulse duration (typically fixed for a laser system), and laser power. In the case of metal alloys such as Ti-6Al-4V, the laser ablation process eliminates the need for several steps of the conventional processes, including hydrofluoric (HF) acid and caustic treatment. These steps are often conducted in dip tanks and require costly facilities and environmentally unfriendly liquids. In addition, the laser can create nano-porosity on the Ti-6Al-4V alloy surface allowing for sol-gel penetration and thereby creating a gradient interface with improved temperature and mechanical performance. NASA LaRC has also been involved with the development of in-line characterization methods compatible with the laser treatment process to rapidly determine the presence of key contaminates such as silicones that, even at very low concentrations, are a threat to adhesive bonding. A spectroscopic technique called micro-laser induced breakdown spectroscopy (u-LIBS) has been developed to rapidly detect silicones at concentrations below those known to cause bonding problems. This technique requires no sample preparation, vacuum or inert atmosphere, has no practical size limitations, and provides nearly instantaneous feedback to the operator. This presentation will give an overview and update of these developments with specific examples highlighted.

Connell, John W.↗

Effect of structure and composition on the electronic excitation induced amorphization of La2Ti2−xZrxO7 ceramics

Abstract Understanding the response of ceramics operating in extreme environments is of interest for a variety of applications. Ab initio molecular dynamic simulations have been used to investigate the effect of structure and B -site (=Ti, Zr) cation composition of lanthanum-based oxides (La 2 B 2 O 7 ) on electronic-excitation-induced amorphization. We find that the amorphous transition in monoclinic layered perovskite La 2 Ti 2 O 7 occurs for a lower degree of electronic excitation than for cubic pyrochlore La 2 Zr 2 O 7 . While in each case the formation of O 2 -like molecules drives the structure to an amorphous state, an analysis of the polyhedral connection network reveals that the rotation of TiO 6 octahedra in the monoclinic phase can promote such molecule formation, while such octahedral rotation is not possible in the cubic phase. However, once the symmetry of the cubic structure is broken by substituting Ti for Zr, it becomes less resistant to amorphization. A compound made of 50% Ti and 50% Zr (La 2 TiZrO 7 ) is found to be more resistant in the monoclinic than in the cubic phase, which may be related to the lower bandgap of the cubic phase. These results illustrate the complex interplay of structure and composition that give rise to the radiation resistance of these important functional materials.

36 MATERIALS SCIENCE↗

Computerized multilevel analysis for multilayered fiber composites

A FORTRAN 4 computer code for the micromechanics, macromechanics, and laminate analysis of multilayered fiber composite structural components is described. The code can be used either individually or as a subroutine within a complex structural analysis/synthesis program. The inputs to the code are constituent materials properties, composite geometry, and loading conditions. The outputs are various properties for ply and composite; composite structural response, including bending-stretching coupling; and composite stress analysis, including comparisons with failure criteria for combined stress. The code was used successfully in the analysis and structural synthesis of flat panels, in the buckling analysis of flat panels, in multilayered composite material failure studies, and lamination residual stresses analysis.

Chamis, C. C.↗

Computerized multilevel analysis for multilayered fiber composites.

A FORTRAN IV computer code for the micromechanics, macromechanics, and laminate analysis of multilayered fiber composite structural components is described. The code can be used either individually or as a subroutine within a complex structural analysis/synthesis program. The inputs to the code are constituent materials properties, composite geometry, and loading conditions. The outputs are various properties for ply and composite; composite structural response, including bending-stretching coupling; and composite stress analysis, including comparisons with failure criteria for combined stress. The code was used successfully in the analysis and structural synthesis of flat panels, in the buckling analysis of flat panels, in multilayered composite material failure studies, and lamination residual stresses analysis.

Chamis, C. C.↗

New RMnO{sub 3+δ} (R=Y, Ho; δ≈0.35) phases with modulated structure

A series of hexagonal RMnO{sub 3} (R=Y, Ho–Lu) compounds are first annealed in various highly oxidizing conditions to show that for the largest R constituents, Y and Ho, it is possible to load the phases with large amounts of excess oxygen. Within the oxygen-annealed samples we identify new heavily-oxygenated phases, that is, YMnO{sub 3.35} and HoMnO{sub 3.34}. The former is then thoroughly characterized by thermogravimetric analysis, X-ray diffraction and electron diffraction. These studies evidence a hexagonal sub-cell (a{sub S}≈3.578 Å (a{sub H}/√(3)), c{sub S}≈11.18 Å, space group P6{sub 3}mc) and satellites, associated with two modulation vectors q{sup →}{sub 1}{sup ⁎}≈0.41a{sup →}{sub S}{sup ⁎}+0.41b{sup →}{sub S}{sup ⁎}+1/3c{sup →}{sub S}{sup ⁎}andq{sup →}{sub 2}{sup ⁎}=(1/2). The results are interpreted by the formation of a modulated composite structure, resulting from the evolution of the hexagonal parent YMnO{sub 3+δ} structure toward a reduced pyrochlore-type structure Y{sub 2}Mn{sub 2}O{sub 7−x}, in long- and short-range ordering. - Graphical abstract: Hexagonal RMnO{sub 3+δ} phases are commonly taken as oxygen-stoichiometric. Here we show that the R=Y and Ho phases can be loaded with excess oxygen up to δ≈0.35 through high-pressure oxygenation annealing. Formation of a new composite structure composed of hexagonal-like RMnO{sub 3+δ} and pyrochlore-like RMnO{sub 3.5−δ} constituents is demonstrated in the case of R=Y. - Highlights: • Hexagonal RMnO{sub 3+δ} phases are commonly taken as oxygen-stoichiometric. • For R=Y and Ho phases excess-oxygen loading is possible. • Single-phase samples with a new composite structure are obtained at δ≈0.35. • The new structure is composed of hexagonal- and pyrochlore-like units.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Materials and Modules for Low Cost, High Performance Fuel Cell Humidifiers

The objective of this program was to demonstrate a durable, high performance water transport membrane; and a compact, low-cost, membrane-based module utilizing that membrane for use in an automotive, stationary and/or portable fuel cell water transport exchangers. Over the past 20 years, great technical progress has been made in improving power density and durability of fuel cell stacks. Yet, operating durably at high performance levels under very dry conditions, e.g., < 20% RH at 80°C or above, remains beyond even the best fuel cell membrane electrode assemblies. Thus, today it is essential to humidify the gases supplied to the fuel cell inlets. In this work, we have produced a new, inexpensive, composite membrane capable of very high water vapor transport and low air cross-over. The composite structure consists of a very thin ionomer layer (e.g., < 5 μm) sandwiched between two microporous polymer layers. The thin ionomer layer facilitates the rapid water transport and provides an impermeable layer to prevent gas cross-over. Such an approach reduces cost, but maintains performance. The microporous layer protects the thin ionomer layer from mechanical damage during handling; confers strength to the thin layer allowing it to be more durable during use; and allows it to withstand higher automotive pressures and temperatures. The composite structure will therefore allow lower total cost while still meeting automotive humidifier water transport and durability targets. Because the transport rates of these new materials are so high, existing planar membrane humidifier module designs available at the start of the program were incapable of efficiently utilizing the high rates. Therefore, the assembled team designed, tested and demonstrated an innovative, low-cost humidifier module with customized channel geometries that can take advantage of the high the water transport rates. The objectives of the program have been fully met. The optimized membrane produced in the program has very high transport rates, nearly twice that of the closest competitive option, a homogeneous perfluorosulfonic acid (PFSA) membrane. Furthermore, the composite structure imparts significant durability advantages, allowing the membrane to remain gas impermeable during 20,000 relative humidity (RH) cycles, unlike the closest competitive options that fail very rapidly. It does suffer from a loss of performance with time at temperature because of inherent properties of the PFSA polymer, but this degradation is manageable through relatively simple system design changes. The final membrane of this program has been produced on manufacturing level equipment in a roll to roll form in the scale of hundreds of square meters. The process is readily scalable to automotive level volumes to allow production of a low-cost membrane required for this application. A full scale automotive air-to-air humidifier module has been designed, tested and built. The final module meets the design specifications required for automotive fuel cell use, and exceeds all the DOE 2017 targets for a cathode humidification module as determined in independent testing at Ford Motor Company. It has a small volume, less than 5 liters; a high water transfer rate, significantly greater than 5 g/s at the DOE specified conditions; acceptably low pressure drop; and is projected to maintain these properties over 5000 hours. Additionally, high volume cost projections suggest that the module can be produced for less than $\$$100 per unit in a scale of 500,000 units per year.

08 HYDROGEN↗

Materials and Modules for Low Cost, High Performance Fuel Cell Humidifiers (Final Report)

Over the past 20 years, great technical progress has been made in improving power density and durability of fuel cell stacks. Yet, operating durably at high performance levels under very dry conditions, e.g., < 20% RH at 80 °C or above, remains beyond even the best fuel cell membrane electrode assemblies. Thus, today it is essential to humidify the gases supplied to the fuel cell inlets. In this work, we have produced a new, inexpensive, composite membrane capable of very high water vapor transport and low air cross-over. The composite structure consists of a very thin ionomer layer (e.g., < 5 μm) sandwiched between two microporous polymer layers. The thin ionomer layer facilitates the rapid water transport and provides an impermeable layer to prevent gas cross-over. Such an approach reduces cost, but maintains performance. The microporous layer protects the thin ionomer layer from mechanical damage during handling; confers strength to the thin layer allowing it to be more durable during use; and allows it to withstand higher automotive pressures and temperatures. The composite structure will therefore allow lower total cost while still meeting automotive humidifier water transport and durability targets. Because the transport rates of these new materials are so high, existing planar membrane humidifier module designs available at the start of the program were incapable of efficiently utilizing the high rates. Therefore, the assembled team designed, tested and demonstrated an innovative, low-cost humidifier module with customized channel geometries that can take advantage of the high the water transport rates. Program Results: The objectives of the program have been fully met. The optimized membrane produced in the program has very high transport rates, nearly twice that of the closest competitive option, a homogeneous perfluorosulfonic acid (PFSA) membrane. Furthermore, the composite structure imparts significant durability advantages, allowing the membrane to remain gas impermeable during 20,000 relative humidity (RH) cycles, unlike the closest competitive options that fail very rapidly. It does suffer from a loss of performance with time at temperature because of inherent properties of the PFSA polymer, but this degradation is manageable through relatively simple system design changes. The final membrane of this program has been produced on manufacturing level equipment in a roll to roll form in the scale of hundreds of square meters. The process is readily scalable to automotive level volumes to allow production of a low-cost membrane required for this application. A full scale automotive air-to-air humidifier module has been designed, tested and built. The final module meets the design specifications required for automotive fuel cell use, and exceeds all the DOE 2017 targets for a cathode humidification module as determined in independent testing at Ford Motor Company. It has a small volume, less than 5 liters; a high water transfer rate, significantly greater than 5 g/s at the DOE specified conditions; acceptably low pressure drop; and is projected to maintain these properties over 5000 hours. Additionally, high volume cost projections suggest that the module can be produced for less than $100 per unit in a scale of 500,000 units per year.

08 HYDROGEN↗

Effect of temperature on composite sandwich structures subjected to low velocity projectile impact

An experimental investigation was conducted to study the effect of low velocity projectile impact on graphite/epoxy and Kevlar 49- graphite/epoxy sandwich structural components. Testing was performed at moderately low- and high-temperatures to assess the strength degradation of composites as compared to room temperature values. Low energy projectile impact is considered to simulate the damage caused by runway debris such as small rocks, dropping of hand tools during servicing, etc., on secondary aircraft structures fabricated out of composites. The preload and impact energy necessary to cause catastrophic failure were determined. The residual strength of impact-damaged specimens was also measured.

Sharma, A. V.↗

Compression Strength of Composite Primary Structural Components

The focus of research activities under NASA Grant NAG-1-2035 was the response and failure of thin-walled structural components. The research is applicable to the primary load carrying structure of flight vehicles, with particular emphasis on fuselage and wing'structure. Analyses and tests were performed that are applicable to the following structural components an aft pressure bulkhead, or a composite pressure dome, pressure cabin damage containment, and fuselage frames subject to crash-type loads.

Johnson, Eric R.↗

Scaling up the Single Transducer Thickness-Independent Ultrasonic Imaging Method for Accurate Characterization of Microstructural Gradients in Monolithic and Composite Tubular Structures

Ultrasonic velocity/time-of-flight imaging that uses back surface reflections to gauge volumetric material quality is highly suited for quantitative characterization of microstructural gradients including those due to pore fraction, density, fiber fraction, and chemical composition variations. However, a weakness of conventional pulse-echo ultrasonic velocity/time-of-flight imaging is that the image shows the effects of thickness as well as microstructural variations unless the part is uniformly thick. This limits this imaging method's usefulness in practical applications. Prior studies have described a pulse-echo time-of-flight-based ultrasonic imaging method that requires using a single transducer in combination with a reflector plate placed behind samples that eliminates the effect of thickness variation in the image. In those studies, this method was successful at isolating ultrasonic variations due to material microstructure in plate-like samples of silicon nitride, metal matrix composite, and polymer matrix composite. In this study, the method is engineered for inspection of more complex-shaped structures-those having (hollow) tubular/curved geometry. The experimental inspection technique and results are described as applied to (1) monolithic mullite ceramic and polymer matrix composite 'proof-of-concept' tubular structures that contain machined patches of various depths and (2) as-manufactured monolithic silicon nitride ceramic and silicon carbide/silicon carbide composite tubular structures that might be used in 'real world' applications.

Roth, Don J.↗

High-power terahertz pulse generation from bias-free nanoantennas on graded composition InGaAs structures

We present a bias-free photoconductive emitter that uses an array of nanoantennas on an InGaAs layer with a linearly graded Indium composition. The graded InGaAs structure creates a built-in electric field that extends through the entire photoconductive active region, enabling the efficient drift of the photo-generated electrons to the nanoantennas. The nanoantenna geometry is chosen so that surface plasmon waves are excited in response to a 1550 nm optical pump to maximize photo-generated carrier concentration near the nanoantennas, where the built-in electric field strength is maximized. With the combination of the plasmonic enhancement and built-in electric field, high-power terahertz pulses are generated without using any external bias voltage. We demonstrate the generation of terahertz pulses with 860 µW average power at an average optical pump power of 900 mW, exhibiting the highest radiation power compared to previously demonstrated telecommunication-compatible terahertz pulse emitters.

42 ENGINEERING↗

Better Finite-Element Analysis of Composite Shell Structures

A computer program implements a finite-element-based method of predicting the deformations of thin aerospace structures made of isotropic materials or anisotropic fiber-reinforced composite materials. The technique and corresponding software are applicable to thin shell structures in general and are particularly useful for analysis of thin beamlike members having open cross-sections (e.g. I-beams and C-channels) in which significant warping can occur.

Clarke, Gregory↗

ACT Payload Shroud Structural Concept Analysis and Optimization

Aerospace structural applications demand a weight efficient design to perform in a cost effective manner. This is particularly true for launch vehicle structures, where weight is the dominant design driver. The design process typically requires many iterations to ensure that a satisfactory minimum weight has been obtained. Although metallic structures can be weight efficient, composite structures can provide additional weight savings due to their lower density and additional design flexibility. This work presents structural analysis and weight optimization of a composite payload shroud for NASA s Ares V heavy lift vehicle. Two concepts, which were previously determined to be efficient for such a structure are evaluated: a hat stiffened/corrugated panel and a fiber reinforced foam sandwich panel. A composite structural optimization code, HyperSizer, is used to optimize the panel geometry, composite material ply orientations, and sandwich core material. HyperSizer enables an efficient evaluation of thousands of potential designs versus multiple strength and stability-based failure criteria across multiple load cases. HyperSizer sizing process uses a global finite element model to obtain element forces, which are statistically processed to arrive at panel-level design-to loads. These loads are then used to analyze each candidate panel design. A near optimum design is selected as the one with the lowest weight that also provides all positive margins of safety. The stiffness of each newly sized panel or beam component is taken into account in the subsequent finite element analysis. Iteration of analysis/optimization is performed to ensure a converged design. Sizing results for the hat stiffened panel concept and the fiber reinforced foam sandwich concept are presented.

Zalewski, Bart B.↗

Triphase electrode performance adjustment for rechargeable ion batteries

Rechargeable batteries electrodes are mainly classical oxides with single structure, but their performance is insufficient to meet the growing energy storage needs of modern-society. Recently, composite-structure materials with great improvements in electrochemical performance have been developed. However, little research has been conducted on these materials with regard to adjusting their structures and further controlling their electrochemical performance. Herein, composite-structure Na 2/3 Ni 1/3–x Fe x Ti 2/3 O 2 (0 ≤ x ≤ 1/3) electrodes for sodium-ion batteries were designed on the basis of results from in-situ high-temperature X-ray diffraction. Triphase compositions of P2-Na 2/3 Ni 1/3 Ti 2/3 O 2 , tunnel-Na 2.65 Ti 3.35 Fe 0.65 O 9 , and tunnel-NaFeTiO 4 were prepared, and Na + insertion/extraction in different structures was observed using in-situ electrochemical X-ray diffraction. An optimum electrode with 46% P2-structure presented the best comprehensive performance: 105 mAh g –1 initial reversible capacity along with 86.5% capacity-retention after 1500 cycles. As a result, this work opens a new field for designing and adjusting composite electrodes for better electrochemical performance, not limited for sodium-ion batteries but also for other advanced battery-systems.

25 ENERGY STORAGE↗

Overview Of Structural Behavior and Occupant Responses from Crash Test of a Composite Airplane

As part of NASA's composite structures crash dynamics research, a general aviation aircraft with composite wing, fuselage and empennage (but with metal subfloor structure) was crash tested at the NASA Langley Research Center Impact Research Facility. The test was conducted to determine composite aircraft structural behavior for crash loading conditions and to provide a baseline for a similar aircraft test with a modified subfloor. Structural integrity and cabin volume were maintained. Lumbar loads for dummy occupants in energy absorbing seats wer substantially lower than those in standard aircraft seats; however, loads in the standard seats were much higher that those recorded under similar conditions for an all-metallic aircraft.

Jones, Lisa E.↗

Hydrogen Dissociation on Pd 4 S Surfaces

Exposure of Pd-based hydrogen purification membranes to H 2 S, a common contaminant in coal gasification streams, can cause membrane performance to deteriorate, either by deactivating surface sites required for dissociative H 2 adsorption or by forming a low-permeability sulfide scale. In this work, the composition, structure, and catalytic activity of Pd 4 S, a surface scale commonly observed in Pd-membrane separation of hydrogen from sulfur-containing gas streams, were examined using a combination of experimental characterization and density functional theory (DFT) calculations. A Pd 4 S sample was prepared by exposing a 100 μm Pd foil to H 2 S at 908 K. Both X-ray photoemission depth profiling and low energy ion scattering spectroscopic (LEISS) analysis reveal slight sulfur-enrichment of the top surface of the sample. This view is consistent with the predictions of DFT atomistic thermodynamic calculations, which identified S-terminated Pd4S surfaces as energetically favored over corresponding Pd-terminated surfaces. Activation barriers for H 2 dissociation on the Pd 4 S surfaces were calculated. Although barriers are higher than on Pd(111), transition state theory analysis identified reaction pathways on the S-terminated surfaces for which hydrogen dissociation rates are high enough to sustain the separation process at conditions relevant to gasification applications.

08 HYDROGEN↗

Performance Prediction of High‐Entropy Perovskites La 0.8 Sr 0.2 Mn x Co y Fe z O 3 with Automated High‐Throughput Characterization of Combinatorial Libraries and Machine Learning

Perovskite oxides form a large family of materials with applications across various fields, owing to their structural and chemical flexibility. Efficient exploration of this extensive compositional space is now achievable through automated high-throughput experimentation combined with machine learning. In this study, we investigate the composition–structure–performance relationships of high-entropy La 0.8 Sr 0.2 Mn x Co y Fe z O 3±𝞭 perovskite oxides (0 < x, y, z <1; x+y+z≈1) for application as oxygen electrodes in Solid Oxide Cells. Following the deposition of a continuous compositional map using thin-film combinatorial pulsed laser deposition, compositional, structural, and performance properties are characterized using six different techniques with mapping capabilities. Random forests effectively model electrochemical performance, consistently identifying Fe-rich oxides as optimal compounds with the lowest area-specific resistance values for oxygen electrodes at 700 °C. Additionally, the models identify a statistical correlation between oxygen sublattice distortion—derived from spectral analysis of Raman-active modes—and enhanced performance.

high entropy oxides↗