Search NASA⌕ Search

SEARCH · Search NASA

Results for “compositional analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Phase relations and structural features in the system Ni-Zn-B

Phase relations for the system Ni-Zn-B have been established in the isothermal section at 800 Degree-Sign C based on X-ray powder diffraction and electron microprobe analyses of about 60 samples, which have been prepared by hot pressing of pre-annealed powder compacts of arc-melted master alloys Ni{sub x}B{sub y} and Zn-filings. Six ternary compounds (labeled {tau}{sub 1} to {tau}{sub 6}) were found to exist, which in some cases exhibit considerable mutual solid solubilities mostly as an exchange of Ni-Zn at constant B-content, but in the case of the so-called {tau}-phase {tau}{sub 1}-(Ni{sub 1-x}Zn{sub x}){sub 21}[Zn{sub 1-y-z}{open_square}{sub y}(B{sub 4}){sub z}]{sub 2}B{sub 6} (0.07{<=}x{<=}0.11, 0.07{<=}y{<=}0.53, 0{<=}z{<=}0.3) also with Zn/B substitution. Single crystal X-ray data analysis for the composition x=0.07, y=0.125, z=0.30, and a=1.05800(3) nm confirmed the Cr{sub 23}C{sub 6} type with space group Fm3{sup Macron }m, but revealed partial replacement of Zn-atoms by B{sub 4}-tetrahedra (R{sub F}=0.014). Whereas Ni/Zn exchange (at constant B-content) ranges at about 4-5 at% for {tau}{sub 4}-Ni{sub 3}ZnB{sub 2} and {tau}{sub 5}-Ni{sub 48}Zn{sub 32}B{sub 20}, it is below 3 at% for {tau}{sub 2}-Ni{sub 12}ZnB{sub 8-x} (x=0.43), {tau}{sub 3}-Ni{sub 21}Zn{sub 2}B{sub 20} and {tau}{sub 6}-Ni{sub 47}Zn{sub 23}B{sub 30}. The crystal structures of {tau}{sub 2}-Ni{sub 12}ZnB{sub 8-x} (x=0.43; Ni{sub 12}AlB{sub 8} type), {tau}{sub 3}-Ni{sub 21}Zn{sub 2}B{sub 20} (own type) and {tau}{sub 4}-Ni{sub 3}ZnB{sub 2} (own type) have been determined in our foregoing paper [8]. Due to the non-availability of suitable single crystals, the crystal structures of {tau}{sub 5}-Ni{sub 48}Zn{sub 32}B{sub 20} (body-centered orthorhombic; a=1.6(2) nm, b=0.63(7) nm, and c=0.27(0) nm, determined from TEM) and of {tau}{sub 6}-Ni{sub 47}Zn{sub 23}B{sub 30} have not been elucidated yet. Phase equilibria at 800 Degree-Sign C are dominated by a large three-phase field ({beta}B)+Ni{sub 2}Zn{sub 11}+{tau}{sub 3}, as practically all ternary compounds form at compositions with less than about 50 at% Ni. Furthermore, precise data on atom site distribution and positional parameters have been provided from X-ray single crystal refinements for Ni-borides, for which crystal structures hitherto have only been derived from X-ray diffraction photographs: o-Ni{sub 4}B{sub 3-x} (x=0.19; Pnma, a=1.9665(4) nm, b=0.29852(1) nm, c=0.65750(2) nm; R{sub F}=0.015) and m-Ni{sub 4}B{sub 3} (C2/c, a=0.64356(3) nm, b=0.48867(3) nm, c=0.78267(3) nm, {beta}=103.288(3) Degree-Sign , R{sub F}=0.021). - Graphical abstract: Ni-Zn-B isothermal section at 800 Degree-Sign C. Highlights: Black-Right-Pointing-Pointer Phase relations were determined for the system Ni-Zn-B at 800 Degree-Sign C. Black-Right-Pointing-Pointer Existence of six ternary compounds ({tau}{sub 1}-{tau}{sub 6}) has been confirmed at 800 Degree-Sign C. Black-Right-Pointing-Pointer Homogeneity range for {tau}{sub 1} with respect to Ni/Zn and Zn/B at 800 Degree-Sign C has been determined. Black-Right-Pointing-Pointer The crystal structures of {tau}{sub 5}-Ni{sub 48}Zn{sub 32}B{sub 20} from TEM (oI, a=1.6(2) nm, b=0.63(7) nm, and c=0.27(0) nm). Black-Right-Pointing-Pointer Precise data on {tau}{sub 1}-(Ni{sub 1-x}Zn{sub x}){sub 21}[Zn{sub 1-y-z{open_square}y}(B{sub 4}){sub z}]{sub 2}B{sub 6} (0.07{<=}x{<=}0.11, 0.07{<=}y{<=}0.53, 0{<=}z{<=}0.3), o-Ni{sub 4}B{sub 3-x} and m-Ni{sub 4}B{sub 3} have been presented.

36 MATERIALS SCIENCE↗

Nuclear forensic analysis on uranium ore concentrates: A multi-laboratory intercomparison study

A collaboration between the United States and Japan performed nuclear forensic analyses on a set of 7 uranium ore concentrate (UOC) samples with known origins to improve methodologies and best practices in the field. Overall, good agreement between the 4 participating laboratories was achieved for uranium assay, uranium isotope composition, strontium isotope composition, and trace element analysis. In conclusion, the combination of these four signatures is sufficient to distinguish the different origins among these studied UOCs.

and nuclear chemistry↗

Acoustic emission for characterising the crack propagation in strain-hardening cement-based composites (SHCC)

This paper presents the analysis of crack propagation in strain-hardening cement-based composite (SHCC) under tensile and flexural load by using acoustic emission (AE). AE is a non-destructive technique to monitor the development of structural damage due to external forces. The main objective of this research was to characterise the cracking behaviour in SHCC in direct tensile and flexural tests by using AE. A better understanding of the development of microcracks in SHCC will lead to a better understanding of pseudo strain-hardening behaviour of SHCC and its general performance. ARAMIS optical deformation analysis was also used in direct tensile tests to observe crack propagation in SHCC materials. For the direct tensile tests, SHCC specimens were prepared with polyvinyl alcohol (PVA) fibre with three different volume percentages (1%, 1.85% and 2.5%). For the flexural test beam specimens, only a fibre dosage of 1.85% was applied. It was found that the application of AE in SHCC can be a good option to analyse the crack growth in the specimens under increasing load, the location of the cracks and most importantly the identification of matrix cracking and fibre rupture or slippage.

36 MATERIALS SCIENCE↗

The Role of Titania Surface Coating by Atomic Layer Deposition in Improving Osteogenic Differentiation and Hard Tissue Formation of Dental Pulp Stem Cells

Recent studies have focused on modifying implant surface properties to improve bone regeneration and osseointegration. Herein, the role of titania surface coating in enabling dental pulp stem cells (DPSCs) differentiation and hard tissue formation is studied. Atomic layer deposition is applied at lower temperature to coat a nanolayer of titania onto hard and soft polybutadiene substrates without altering their moduli, to probe the effects of surface chemistry and substrate modulus. In the absence of titania, DPSCs prefer to attach and proliferate on the hard substrate, where particle-like biomineralization is present after 28 days in culture, whereas no biomineralization is observed on the soft substrate. Applying titania surface coating results in the improvement of adhesion and proliferation, regardless of substrate modulus, whereas cell and substrate moduli remain the same as control without titania coating. Furthermore, templated biomineralization is observed given the bone-like tissue composition by Raman analysis, in consistent with real time-polymerase chain reaction (RT-PCR) results showing upregulation of osteopontin (OPN) and bone sialoprotein (BSP), representing osteogenic differentiation. Furthermore, the results indicate that titania surface coating improved the ability to nucleate banded collagen fibers which in turn templated mineral deposits, and further induced the osteogenesis of DPSCs, regardless of its substrate modulus.

36 MATERIALS SCIENCE↗

Mechanisms of Alkali Ionic Transport in Amorphous Oxyhalides Solid State Conductors

Amorphous oxyhalides have attracted significant attention due to their relatively high ionic conductivity (1 mS cm –1 ), excellent chemical stability, mechanical softness, and facile synthesis routes via standard solid‐state reactions. These materials exhibit an ionic conductivity that is almost independent of the underlying chemistry, in stark contrast to what occurs in crystalline conductors. In this work, we employ machine learning interatomic potentials to construct large‐scale molecular dynamics trajectories encompassing hundreds of nanoseconds to obtain statistically converged transport properties. We find that the amorphous state consists of chain fragments of metal‐anion tetrahedra of various lengths. By analyzing the residence time of alkali cations migrating around tetrahedrally‐coordinated metals, we find that oxygen anions limit alkali diffusion. By computing the full Einstein expression of the ionic conductivity, we demonstrate that the alkali transference number of these materials is strongly influenced by distinct‐particles correlations, while alkali transport is dictated by uncorrelated self‐diffusion. By extending this analysis to chemical compositions AMX 2.5 O 0.75 , spanning different alkaline (A = Li, Na, K), metallic (M = Al, Ga, In), and halogen (X = Cl, Br, I) species, we clarify why the diffusion properties of these materials remain largely insensitive to variations in atomic isovalent chemistry.

amorphous materials↗

Impact of exposure to brine/CO 2 on the mechanical and transport properties of the Mt. Simon Sandstone

When sandstone rocks are exposed to CO 2 -saturated brine, their transport and mechanical properties can, potentially, change due to chemical reactions as a result of such exposure. This paper investigates changes in the flow-through characteristics, porosity, and the mechanical properties of Mt. Simon Sandstone samples caused by such exposure to brine/CO 2 . A core, extracted from the Mt. Simon formation, was first characterized for its porosity and relevant transport properties, and it was then aged for over 500 hr in CO 2 -saturated brine at formation-relevant pressure, temperature, and confining stress conditions. The deformation of the sample was measured in situ during aging via strain gauges attached to the core's surface. Following the aging experiment, the sample's porosity and transport properties were again analyzed. Our experiments show that both the porosity and permeability of the Mt. Simon sandstone sample increase due to exposure to brine/CO 2 , with the impact on permeability being more significant. The deformation measurements employing strain gauges indicate a weakening of the core material. Analysis of the composition of the brine at the conclusion of the testing reveals changes, specifically, an increase in the concentration of several of the cations. These changes are indicative of mineral/clay dissolution, consistent with the porosity, permeability, and strain gauge measurements.

58 GEOSCIENCES↗

Physical drivers facilitating a toxigenic cyanobacterial bloom in a major Great Lakes tributary

The Maumee River is the primary source for nutrients fueling seasonal Microcystis -dominated blooms in western Lake Erie's open waters though such blooms in the river are infrequent. The river also serves as source water for multiple public water systems and a large food services facility in northwest Ohio. On 20 September 2017, an unprecedented bloom was reported in the Maumee River estuary within the Toledo metropolitan area, which triggered a recreational water advisory. Here we (1) explore physical drivers likely contributing to the bloom's occurrence, and (2) describe the toxin concentration and bacterioplankton taxonomic composition. A historical analysis using 10-years of seasonal river discharge, water level, and local wind data identified two instances when high-retention conditions occurred over ≥ 10 d in the Maumee River estuary: in 2016 and during the 2017 bloom. Observation by remote sensing imagery supported the advection of cyanobacterial cells into the estuary from the lake during 2017 and the lack of an estuary bloom in 2016 due to a weak cyanobacterial bloom in the lake. A rapid-response survey during the 2017 bloom determined levels of the cyanotoxins, specifically microcystins, in excess of recreational contact limits at sites within the lower 20 km of the river while amplicon sequencing found these sites were dominated by Microcystis . These results highlight the need to broaden our understanding of physical drivers of cyanobacterial blooms within the interface between riverine and lacustrine systems, particularly as such blooms are expected to become more prominent in response to a changing climate.

54 ENVIRONMENTAL SCIENCES↗

Photochemical Reactions of Poly(4-vinylphenol) Thin Films

The mechanism involved in the photochemical immobilization of poly(4-vinylphenol) (PVP) thin films was investigated. The films were fabricated by a simple procedure of UV irradiation and solvent extraction. A combination of ellipsometry, IR, and high-resolution x-ray photoelectron spectroscopy (XPS) were used to provide detailed and quantitative analysis of the composition of the photochemical reaction products. Upon irradiation at 260 nm, benzyl and phenoxy radicals are generated in the polymer. In the absence of oxygen, PVP films crosslink via the combination of the benzyl radicals or phenoxy radicals. At lower irradiation doses, the photochemical process was dominated by crosslinking of the polymer backbone via the combination of benzyl radicals. At higher exposure doses, phenoxy radicals were generated producing crosslinked quinoid structures. The concentration increased 2 with the irradiation time and thus the percentage of the crosslinked quinoid structures. No oxidation or degradation products were observed. In the presence of oxygen, additional reactions of oxidation and degradation occurred. At lower doses, oxidation at the benzyl position produced the ketone structure evidenced by the drastic increase the O content in the irradiated films. As the irradiation doses increased, further oxidation at the methylene position occurred, and in addition, volatile and degradation products were also generated. This photochemical process was successfully employed to fabricate patterned PVP structures. Photolithography at lower doses followed by solvent development created negative-tone PVP patterns. Irradiating the film at higher doses generated “pseudo” positive-tone patterns after the volatile products in the irradiated areas left the film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and Functional Parameters of the Thymus in Mice Exposed to γ-Irradiation after Restraint Stress

In mice exposed to γ-irradiation in a dose of 2 Gy after 15-days restraint stress, the body weight decreased by 21% and thymus weight decreased by 33.3% in comparison with the control, and significant changes in the histological structure of the thymus were observed. The medullary substance prevailed over the cortical substance. The absolute number of cells per 1 mm{sup 2} of histological section was reduced in the subcapsular area and medullary substance. The analysis of cell composition in functional areas of the thymus showed the most pronounced changes in the cortical substance. The decrease in the number of proliferating cells and low-differentiated lymphocytes and the increase in the number of destructed cells reflected impairment of the lymphocytopoietic function of the thymus. A minor decrease in the number of small lymphocytes indicated impaired migration processes in the thymus of mice exposed to γ-irradiation after restraint stress. The observed complex of histological and physiological changes in the thymus can lead to dysfunction of the lymphatic (immune) system.

60 APPLIED LIFE SCIENCES↗

Dissolution of aerosol particles collected from nuclear facility plutonium production process

Here, a simple, robust analytical chemistry method has been developed to dissolve plutonium containing particles in a complex matrix. The aerosol particles collected on Marple cascade impactor substrates were shown to be dissolved completely with an acid mixture of 12 M HNO 3 and 0.1 M HF. A pressurized closed vessel acid digestion technique was utilized to heat the samples at 130 °C for 16 h to facilitate the digestion. The dissolution efficiency for plutonium particles was 99 %. The resulting particle digestate solution was suitable for trace elemental analysis and isotope composition determination, as well as radiochemistry measurements.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Mechanical Behavior of Additively Manufactured Molybdenum and Fabrication of Microtextured Composites

Refractory metals are a class of high-melting-temperature materials suitable for use in extreme environment applications. Interestingly, during additive manufacturing many pure refractory metals exhibit a switch from (001) to (111) build direction fiber preference with increasing surface energy density. Here we exploit this solidification physics to fabricate material with “mesoscale composite” engineered structures consisting of features with contrasting (001) and (111) build direction microtextures. Separately, elevated temperature tensile testing of EBM fabricated material with a randomized distribution of mixed (001)/(111)-fiber grains is shown to exhibit excellent properties. These results are utilized to build a crystal plasticity model for evaluating the local inelastic response of the composite mesoscale structures. Analysis of printed microstructures and microstructure-scale simulations indicate that both macro-scale and localized material behavior may be tailored. This strategy can be potentially used to synthesize materials with optimized performance for high-temperature applications.

36 MATERIALS SCIENCE↗

Cell Wall Composition and Underlying QTL in an F1 Pseudo-Testcross Population of Switchgrass

Natural genetic variation for reduced recalcitrance can be used to improve switchgrass for biofuel production. A full-sib switchgrass mapping population developed by crossing a lowland genotype, AP13, and upland genotype, VS16, was evaluated at three locations (Ardmore and Burneyville, OK and Watkinsville, GA). Biomass harvested after senescence in 2009 and 2010 was evaluated at the National Renewable Energy Laboratory (NREL) for sugar release using enzymatic hydrolysis and for lignin content and syringyl/guaiacyl lignin monomer (S/G) ratio using pyrolysis molecular beam mass spectrometry (py-MBMS). Glucose and xylose release ranged from 120 to 313 and 123 to 263 mg g -1 , respectively, while lignin content ranged from 19 to 27% of the dry biomass. Statistically significant differences were observed among the genotypes and the environments for the cell wall composition traits. Regression analysis showed that a unit increase in lignin content reduced total sugar release by an average of 10 mg g -1 . Quantitative trait loci (QTL) analysis detected 9 genomic regions underlying sugar release and 14 for lignin content. The phenotypic variation explained by the individual QTL identified for sugar release ranged from 4.5 to 9.4 and for lignin content from 3.8 to 11.1%. Mapping of the QTL regions to the switchgrass genome sequence (v1.1) found that some of the QTL colocalized with genes involved in carbohydrate processing and metabolism, plant development, defense systems, and transcription factors. Finally, the markers associated with QTL can be implemented in breeding programs to efficiently develop improved switchgrass cultivars for biofuel production.

09 BIOMASS FUELS↗

The bright frontiers of microbial metabolic optogenetics

In recent years, light-responsive systems from the field of optogenetics have been applied to several areas of metabolic engineering with remarkable success. By taking advantage of light's high tunability, reversibility, and orthogonality to host endogenous processes, optogenetic systems have enabled unprecedented dynamical controls of microbial fermentations for chemical production, metabolic flux analysis, and population compositions in co-cultures. In this article, we share our opinions on the current state of this new field of metabolic optogenetics. Furthermore, we make the case that it will continue to impact metabolic engineering in increasingly new directions, with the potential to challenge existing paradigms for metabolic pathway and strain optimization as well as bioreactor operation.

59 BASIC BIOLOGICAL SCIENCES↗

Benchmarking image processing techniques for porosity measurement in polymer additive manufacturing: Review and experimental analysis

An image processing workflow is proposed for porosity measurement in polymer additive manufacturing. Various techniques, including global and local thresholding, region growing, and K-means clustering, were applied to microscopic images of carbon fiber reinforced acrylonitrile butadiene styrene (CF-ABS) and benchmarked for their ability to accurately measure porosity. Global methods included Otsu, minimum error, iterative, and entropy-based thresholding, while local methods included Niblack, Bernsen, Sauvola, and Bradley-Roth algorithms. Artificial uneven illumination was introduced to test local adaptive thresholds. Results showed significant differences in porosity values across methods. Otsu, region growing, and K-means clustering excelled under uniform illumination, while Sauvola and Bradley-Roth performed better with uneven illumination. Comparison with X-ray computed tomography (XCT) revealed slightly lower porosity values (2.55 %) than optimized methods (2.73–2.79 %) due to XCT's lower resolution excluding smaller pores. While XCT offers finer pore detection, it limits sample volume and underestimates porosity due to spatial variation. Validation using artificial grayscale images with 5 % porosity confirmed that Otsu, Bradley-Roth, region growing, and Sauvola algorithms produced accurate results. Although tested on a single material system, these methods can be adapted to others with optimization. In conclusion, given XCT's high computational and time costs, this study highlights suitable image processing techniques as cost-effective alternatives for porosity analysis in polymer composites.

Additive manufacturing↗

Microwave-assisted pyrolysis of Mississippi coal: A comparative study with conventional pyrolysis

Pyrolysis conditions greatly affect the structure-reactivity relationship of char during coal gasification. Here, this work investigated the effect of temperature and microwave heating on the structural properties of the chars generated during pyrolysis, as well as gaseous and tar products. Results showed that microwave pyrolysis of Mississippi coal produced more gaseous products and less tars compared to conventional pyrolysis. Higher CO/CO 2 ratio (>1) was observed under microwave pyrolysis compared to conventional pyrolysis (CO/CO2 < 1), which may be explained by a greater extent of gasification between solid carbon and the CO 2 formed during microwave pyrolysis. Additionally, in microwave pyrolysis, the oil tars generated exhibited lower concentrations of polar oxygenates, while the wax tars showed higher concentrations of non-polar alkanes, as observed from the intensity of CH vibrations in FTIR. The product compositions and FTIR analysis of the tars (oils and waxes) suggest that the microwave interacted preferentially with these polar species, which have relatively higher dielectric properties compared to alkanes. The structure–reactivity relationship of the chars produced was also investigated using a variety of characterization tools such as XRD, BET, SEM, EDS, and FTIR. Finally, the char reactivity towards combustion suggested that microwave-produced chars have a higher thermal stability, likely due to lower O/C ratios, and could be utilized in the metallurgical industry.

01 COAL, LIGNITE, AND PEAT↗

Agricultural Risk Factors Influence Microbial Ecology in Honghu Lake

Agricultural activities, including stock-farming, planting industry, and fish aquaculture, can affect the physicochemical and biological characters of freshwater lakes. However, the effects of pollution producing by agricultural activities on microbial ecosystem of lakes remain unclear. Hence, in this work, we selected Honghu Lake as a typical lake that is influenced by agriculture activities. We collected water and sediment samples from 18 sites, which span a wide range of areas from impacted and less-impacted areas. We performed a geospatial analysis on the composition of microbial communities associated with physicochemical properties and antibiotic pollution of samples. The co-occurrence networks of water and sediment were also built and analyzed. Our results showed that the microbial communities of impacted and less-impacted samples of water were largely driven by the concentrations of TN, TP, NO3--N, and NO2--N, while those of sediment were affected by the concentrations of Sed-OM and Sed-TN. Antibiotics have also played important roles in shaping these microbial communities: the concentrations of oxytetracycline and tetracycline clearly reflected the variance in taxonomic diversity and predicted functional diversity between impacted and less-impacted sites in water and sediment samples, respectively. Furthermore, for samples from both water and sediment, large differences of network topology structures between impacted and less-impacted were also observed. Our results provide compelling evidence that the microbial community can be used as a sentinel of eutrophication and antibiotics pollution risk associated with agricultural activity; and that proper monitoring of this environment is vital to maintain a sustainable environment in Honghu Lake.

Agriculture activities↗

Facile approach to prepare hollow core–shell NiO microspherers for supercapacitor electrodes

A facile lamellar template method (see image) has been developed for the preparation of uniform hollow core–shell structure NiO (HCS–NiO) with a nanoarchitectured wall structure. The prepared NiO was found to be highly crystalline in uniform microstructures with high specific surface area and pore volume. The results indicated that ethanol interacted with trisodium citrate played an important role for the formation of hollow core–shell spheres. On the basis of the analysis of the composition and the morphology, a possible formation mechanism was investigated. NiO microspheres with hollow core–shell showed excellent capacitive properties. The exceptional cyclic, structural and electrochemical stability with ∼95% coulombic efficiency, and very low ESR value from impedance measurements promised good utility value of hollow core–shell NiO material in fabricating a wide range of high-performance electrochemical supercapacitors. - The hollow core–shell NiO was prepared with a facile lamellar template method. The prepared NiO show higher capacitance, lower ion diffusion resistance and better electroactive surface utilization for Faradaic reactions. - Highlights: • Formation of hollow core–shell NiO via a novel and facile precipitation route. • Exhibited uniform feature sizes and high surface area of hollow core–shell NiO. • Synthesized NiO has high specific capacitance ( 448 F g{sup 1}) and very low ESR value. • Increased 20% of long life cycles capability after 500 charge–discharge cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sol–gel synthesis of MCM-41 silicas and selective vapor-phase modification of their surface

Silica particles with uniform hexagonal mesopore architecture were synthesized by template directed sol–gel condensation of tetraethoxysilane or mixture of tetraethoxysilane and (3-chloropropyl)triethoxysilane in a water–ethanol–ammonia solution. Selective functionalization of exterior surface of parent materials was carried out by postsynthetic treatment of template-filled MCM-41 and Cl-MCM-41 with vapors of (3-chloropropyl)triethoxysilane and 1,2-ethylenediamine in vacuum. The chemical composition of obtained mesoporous silicas was estimated by IR spectroscopy and chemical analysis of surface products of reactions. Characteristics of porous structure of resulting materials were determined from the data of X-ray, low-temperature nitrogen ad-desorption and transmission electron microscopy measurements. Obtained results confirm invariability of highly ordered mesoporous structure of MCM-41 and Cl-MCM-41 after their selective postsynthetic modification in vapor phase. It was proved that proposed method of vapor-phase functionalization of template-filled starting materials is not accompanied by dissolution of the template and chemical modification of pores surface. This provides preferential localization of grafted functional groups onto the exterior surface of mesoporous silicas. - Graphical abstract: Sol–gel synthesis and postsynthetic chemical modification of template-filled MCM-41 and Cl-MCM-41 with (3-chloropropyl)triethoxysilane and 1,2-ethylenediamine in vapor phase. Display Omitted - Highlights: • Synthesis of MCM-41 silica by template directed sol–gel condensation. • Selective vapor-phase functionalization of template-filled silica particles. • Preferential localization of grafted groups onto the exterior surface of mesoporous silicas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗