Search NASA⌕ Search

SEARCH · Search NASA

Results for “conditional shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Urbanization drives convergence in soil profile texture and carbon content

Urban development has driven extensive modification of the global landscape. This shift in land use and land cover alters ecological functioning, and thereby affects sustainable management agendas. Urbanization fundamentally reshapes the soils that underlay landscapes, and throughout the soil profile, extends impacts of urbanization far below the landscape surface. The impacts of urbanization on deeper soils that are beyond the reach of regular land management are largely unknown, and validation of general theories of convergent ecosystem properties are thwarted by a dearth of both level of measurement effort and the substantial heterogeneity in soils and urban landscapes. Here, we examined two soil properties with strong links to ecological functioning—carbon and mineral-fraction particle size—measured in urban soils, and compared them to their pre-urbanization conditions across a continental gradient encompassing global soil diversity. We hypothesized that urbanization drove convergence of soils properties from heterogeneous pre-urban conditions towards homogeneous urban conditions. Based on our observations, we confirm the hypothesis. Both soil carbon and particle size converged toward an intermediate value in the full data distribution, from pre-urban to urban conditions. These outcomes in urban soils were observed to uniformly be fine textured soils with overall lower carbon content. Although these properties are desirable for supporting urban infrastructure (e.g. buildings, pipes), they constrain the potential to render ecosystem services. Since soil profile texture and carbon content were convergent and observed across 11 cities, we suggest that these property profiles can be used as a universal urban soil profile to: 1) provide a clear prediction for how urbanization will shift soil properties from pre-urban conditions, 2) facilitate the adoption of commonly-accepted soil profiles for process models, and 3) offer a reference point to test against urban management strategies and how they impact soil resources.

54 ENVIRONMENTAL SCIENCES↗

XPS Investigation on Changes in UO 2 Speciation following Exposure to Humidity

High purity UO 2 powder samples were subjected to accelerated aging under controlled conditions with relative humidity ranging from 34% to 98%. Characterization of the chemical speciation of the products was accomplished using X-ray photoelectron spectroscopy (XPS). A shift to higher uranium oxidation states was found to be directly correlated to increased relative humidity exposure. In addition, the relative abundance of O 2- , OH - , and H 2 O was found to vary with exposure time. Therefore, it is expected that uranium oxide materials exposed to high relative humidity conditions during processing and storage would display a similar increase in average uranium valence.

36 MATERIALS SCIENCE↗

Use of Hydrogen Chemisorption and Ethylene Hydrogenation as Predictors for Aqueous Phase Reforming of Lactose over Ni@Pt and Co@Pt Bimetallic Overlayer Catalysts

Overlayer Pt on Ni (Ni@Pt) or Co (Co@Pt) were synthesized and tested for H 2 generation from APR of lactose. H 2 chemisorption descriptor showed that Ni@Pt and Co@Pt overlayer catalysts had reduced H 2 adsorption strength compared to a Pt only catalyst, which agree with computational predictions. The overlayer catalysts also demonstrated lower activity for ethylene hydrogenation than the Pt only catalyst, which likely resulted from decreased H 2 binding strength decreasing the surface coverage of H 2 . XAS results showed that overlayer catalysts exhibited higher white line intensity than the Pt catalyst, which indicates a negative d-band shift for the Pt overlayer, further providing evidence for overlayer formation. Lactose APR studies showed that lactose can be used as feedstock to produce H 2 and CO under desirable reaction conditions. The Pt active sites of Ni@Pt and Co@Pt overlayer catalysts showed significantly enhanced H 2 production selectivity and activity when compared with that of a Pt only catalyst. The single deposition overlayer with the largest d-band shift showed the highest H 2 activity. Here, the results suggest that overlayer formation using directed deposition technique could modify the behavior of the surface metal and ultimately modify the APR activity.

09 BIOMASS FUELS↗

Spontaneous symmetry breaking in light front field theory

A semiclassical picture of spontaneous symmetry breaking in light front field theory is formulated. It is based on a finite-volume quantization of self-interacting scalar fields obeying antiperiodic boundary conditions. This choice avoids a necessity to solve the zero-mode constraint and enables one to define unitary operators which shift the scalar field by a constant. The operators simultaneously transform the light front Fock vacuum to coherent states with lower energy than the Fock vacuum and with nonzero expectation value of the scalar field. The new vacuum states are noninvariant under the discrete or continuous symmetry of the Hamiltonian. Spontaneous symmetry breaking is described in this way in the two-dimensional {lambda}{phi}{sup 4} theory and in the three-dimensional O(2)-symmetric sigma model. A qualitative treatment of topological kink solutions in the first model and a derivation of the Goldstone theorem in the second one are given. Symmetry breaking in the case of periodic boundary conditions is also briefly discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Ab initio X-ray absorption modeling of Cu-SAPO-34: Characterization of Cu exchange sites under different conditions

Copper-exchanged SAPO-34 (Cu-SAPO-34) provides excellent catalytic activity and hydrothermal sta-bility in the selective catalytic reduction (SCR) of NOxby using NH3as a reductant. Here, we find that the6-membered ring (6MR) site is the most energetically favorable for a Cu+ion while the 8-memberedring (8MR) sites are less favorable by about 0.5 eV with respect to the 6MR site in Cu-SAPO-34. Uponadsorption of molecular species (H2O, O, OH, O2), the energy differences between Cu in the 8MR and 6MRsites decreases and almost disappears. Further, a thermodynamic phase diagram study shows that a Cu+ion bound to a single H2O molecule is the most stable species at low oxygen potential values while aCu2+ion bound to 2 OH species is more stable when the oxygen chemical potential is sufficiently high. Bycomparing Cu K-edge XANES between Cu-SSZ-13 and Cu-SAPO-34 with Cu in different oxidation states,we conclude that it is difficult to differentiate the simulated XANES of Cu in these structures at a givenoxidation state. By studying the Cu K-edge XANES of several favorable structures in Cu-SAPO-34 in thepresence of adspecies, the simulated XANES results capture the real trend of the edge shift with oxidationstate and gives new insights into the experimentally determined XANES of Cu-SAPO-34 obtained understandard SCR conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultraviolet-Protected Inflation

In natural inflation, the inflaton is a pseudo-Nambu-Goldstone boson which acquires a mass by explicit breaking of a global shift symmetry at scale f. In this case, for small field values, the potential is flat and stable under radiative corrections. Nevertheless, slow roll conditions enforce f>>M{sub p}, making the validity of the whole scenario questionable. In this Letter, we show that a coupling of the inflaton kinetic term to the Einstein tensor allows f<<M{sub p} by enhancing the gravitational friction acting on the inflaton during inflation. This new unique interaction (a) keeps the theory perturbative in the whole inflationary trajectory, (b) preserves the tree-level shift invariance of the pseudo-Nambu-Goldstone boson, and (c) avoids the introduction of any new degrees of freedom with respect to standard natural inflation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of phase matching on the Cooper minimum in Ar high-order harmonic spectra

We systematically study the influence of phase matching on interference minima in high-harmonic spectra. We concentrate on structures in atoms due to interference of different angular-momentum channels during recombination. For this purpose, we use the Cooper minimum (CM) in argon at {approx}47 eV as a marker in the harmonic spectrum. We measure two-dimensional harmonic spectra in argon as a function of wavelength and angular divergence. While we identify a clear CM in the spectrum when the target gas jet is placed after the laser focus, we find that the appearance of the CM varies with angular divergence and can even be completely washed out when the gas jet is placed closer to the focus. We also show that the argon CM appears at different wavelengths in harmonic and photoabsorption spectra measured under conditions independent of any wavelength calibration. We model the experiment with a simulation based on coupled solutions of the time-dependent Schroedinger equation and the Maxwell wave equation, thereby including both the single-atom response and macroscopic effects of propagation and phase matching. The single-atom calculations confirm that the ground state of argon can be represented by its field-free p symmetry, despite the strong laser field used in high-harmonic generation. Because of this, the CM structure in the harmonic spectrum can be described as the interference of continuum s and d channels, whose relative phase jumps by {pi} at the CM energy, resulting in a minimum shifted from the photoionization result. We also show that the full calculations reproduce the dependence of the CM on the macroscopic conditions. We calculate simple phase-matching factors as a function of harmonic order and explain our experimental and theoretical observation in terms of the effect of phase matching on the shape of the harmonic spectrum. Our results emphasize that phase matching must be taken into account to fully understand spectral features related to harmonic spectroscopy. Furthermore, we show that in some cases phase matching can be actively used to enhance the visibility of interference minima in high-harmonic spectra.

74 ATOMIC AND MOLECULAR PHYSICS↗

Loss of Control Detection for Commercial Transport Aircraft Using Conditional Variational Autoencoders

This work describes a detector for the loss of control condition of a commercial transport in flight. The detector has a belief state defined by the latent variable stochastic modeling of a conditional variational autoencoder (CVAE) constructed with bidirectional recurrent layers. In 2000, the Boeing Company and the NASA Langley Research Center jointly developed a quantitative set of metrics for defining loss-of-control (LOC) for a commercial transport. We use the thresholds for these quantitative metrics to define a condition vector for training the CVAE. First, we demonstrate through experimentation that reconstruction probability is an accurate indicator that the vehicle has shifted to an LOC state. Second, we introduce a technique for inferring that the vehicle is approaching a flight state change by measuring a shift in the sampling distributions of the CVAE latent space. The sampling distributions for flight observations that are approaching envelope limits are localized to external areas of the latent space. We provide an analysis of its applicability to flight data from NASA’s dynamically-scaled generic transport model (GTM) aircraft.

Loss of control↗

Rational Design of Nanoplasmonic Array Geometries for Biosensing

Background: Molecular diagnostics provide early and accurate diagnosis, which is essential for the prevention and treatment of infectious as well as chronic diseases. These tests are designed to detect disease-specific bioanalytes such as nucleic acid (DNA or RNA) or protein (antigens, antibodies) biomarkers. In the context of infectious disease diagnosis, nucleic acid-based detection methods are known to provide more specific and sensitive results. Here, the presence of a unique sequence belonging to the pathogenic genomic material is targeted to identify species, organism, genera and/or antimicrobial resistant gene markers. The majority of the common nucleic acid based diagnostic techniques require amplification (polymerase chain reaction, isothermal amplification etc.) of the pathogenic genetic material prior to detection impacting diagnostic speed, complexity, and cost thereby limiting ease of use. Thus, the development of simplified nucleic acid-based diagnostics that can be even used in resource-poor settings may hugely benefit patients across the globe. Nanopath is a molecular diagnostics company utilizing a solid-state nanosensor to enable sequence-specific detection of target nucleic acids without the need of amplification. These nanostructures enable ultra-sensitive biomarker detection using geometric, feature-dependent properties highly dependent on the local dielectric environment, allowing them to be sensitive to low concentration binding events. This paper describes an application of this approach to provide highly relevant clinical information within a single doctor’s office visit. Intro: The Nanopath team is in collaboration with NASA (National Aeronautics and Space Administration) and NIST (National Institute of Standards and Technology) to push the bounds of the fundamental physics associated with their biosensing platform. The ability of metals to support electromagnetic surface waves gives rise to surface plasmons when optically illuminated. This property, and its strong sensitivity to changes in the local refractive index, allows for the use of metal nanoparticles as ultra-sensitive transducers. In prior work by members of this team, ensembles of randomly oriented nanoparticles (i.e., colloidal nanorods dispersed on chip) were employed for sequence-specific nucleic acid sensing (1-3). While these particle sensors have the advantage of rapid fabrication, they suffer from low sensitivity and quality factor due to the random particle dispersity. In contrast, in this study we employ ordered array nanoparticle ensembles which can be used to improve sensor sensitivity and figure-of-merit. Study Methods Overview: In this talk, we detail the results of sensing experiments and computational simulations to outline a rational design of the structure of these plasmonic nanoparticle arrays for biomolecular sensing. Through simulation and experiment, we iteratively tailor nanostructure dimension to provide high quality signal and large resonance shifts upon modeled nucleic acid binding. In particular, full-wave electromagnetic simulations were conducted using Lumerical photonic simulation software in which periodic boundary conditions were applied in the x- and y- dimensions for each of the nanoplasmonic sensor geometries. To simulate the resonance response to changes in the bulk solution in contact with the sensor surface, the refractive index of the surrounding media was changed appropriately. Nucleic acid hybridization events were modeled using either using spherical structures approximating the relevant radius of genomic material as estimated by polymer models, or as conformal layers with the known refractive indices for nucleic acids. On the basis of initial simulations, nanosensors were fabricated using traditional electron-beam lithography protocols at NIST. To evaluate consensus between simulations and experiments, bulk sensing experiments were carried out in which the resonance peaks were obtained by submerging the sensors in refractive index standards. Key nanosensor characteristics including resonance peak locations, resonance peak shifts as a function of refractive index, and figure of merit (FOM) of extinction curves were examined between the experimental and simulation results prior to proceeding with simulations on additional geometries and more complex solution conditions, and further device fabrication. This iterative process is repeated toward a rational design of nanoplasmonic array geometries for biosensing optimizing response for targeted disease detection. In summary, this study puts forth a methodology for rational design and characterization of regularly spaced nanoparticle arrays for optics-based biosensing. The results of this study will allow for more informed design of nanostructure geometries towards sequence-specific nucleic acid detection. These improved designs have the potential to improve clinical sensitivity and limit-of-detection across disease indication.

sensor↗

Photo-instability of CdSe/ZnS quantum dots in poly(methylmethacrylate) film

The photo-instability of CdSe/ZnS quantum dots (QDs) has been studied under varied conditions. We discussed the main features of the evolution of photoluminescence (PL) intensity and energy at different laser powers, which showed critical dependences on the environment. The PL red shift in a vacuum showed strong temperature dependence, from which we concluded that the thermal activation energy for trapping states of the charge carriers was about 14.7 meV. Furthermore, the PL spectra showed asymmetric evolution during the laser irradiation, for which two possible explanations were discussed. Those results provided a comprehensive picture for the photo-instability of the colloidal QDs under different conditions.

36 MATERIALS SCIENCE↗

Land-use history alters contemporary insect herbivore community composition and decouples plant-herbivore relationships

1. Past land use can create altered soil conditions and plant communities that persist for decades, although the effects of these altered conditions on consumers are rarely investigated. 2. Using a large-scale field study at 36 sites in longleaf pine (Pinus palustris) woodlands, we examined whether historic agricultural land use leads to differences in the abundance and community composition of insect herbivores (grasshoppers, families Acrididae and Tettigoniidae). 3. We measured the cover of six plant functional groups and several environmental variables to determine whether historic agricultural land use affects the relationships between plant cover or environmental conditions and grasshopper assemblages. 4. Land-use history had taxa-specific effects and interacted with herbaceous plant cover to alter grasshopper abundances, leading to significant changes in community composition. Abundance of most grasshopper taxa increased with herbaceous cover in woodlands with no history of agriculture, but there was no relationship in post-agricultural woodlands. We also found that grasshopper abundance was negatively correlated with leaf litter cover. Soil hardness was greater in post-agricultural sites (i.e. more compacted) and was associated with grasshopper community composition. Both herbaceous cover and leaf litter cover are influenced by fire frequency, suggesting a potential indirect role of fire on grasshopper assemblages. 5. Our results demonstrate that historic land use may create persistent differences in the composition of grasshopper assemblages, while contemporary disturbances (e.g. prescribed fire) may be important for determining the abundance of grasshoppers, largely through the effect of fire on plants and leaf litter. Therefore, our results suggest that changes in the contemporary management regimes (e.g. increasing prescribed fire) may not be sufficient to shift the structure of grasshopper communities in post-agricultural sites towards communities in nonagricultural habitats. Rather, repairing degraded soil conditions and restoring plant communities are likely necessary for restoring grasshopper assemblages in post-agricultural woodlands.

60 APPLIED LIFE SCIENCES↗

The Influence of Static and Rotating Magnetic Fields on Heat and Mass Transfer in Silicon Floating Zones

Heat and mass transfer in float-zone processing are strongly influenced by convective flows in the zone. They are caused by buoyancy convection, thermocapillary (Marangoni) convection, or artificial sources such as rotation and radio-frequency heating. Flows in conducting melts can be controlled by the use of magnetic fields, either by damping fluid motion with static fields or by generating a defined flow with rotating fields. The possibilities of using static and rotating magnetic fields in silicon floating-zone growth have been investigated by experiments in axial static fields up to 5 T and in transverse rotating magnetic fields up to 7.5 mT. Static fields of a few 100 mT already suppress most striations but are detrimental to the radial segregation by introducing a coring effect. A complete suppression of dopant striations caused by time-dependent thermocapillary convection and a reduction of the coring to insignificant values, combined with a shift of the axial segregation profile toward a more diffusion-limited case, is possible with static fields greater than or equal to 1 T. However, under certain conditions the use of high axial magnetic fields can lead to the appearance of a new type of pronounced dopant striations, caused by thermoelectromagnetic convection. The use of a transverse rotating magnetic field influences the microscopic segregation at quite low inductions, of the order of a few millitesla. The field shifts time- dependent flows and the resulting striation patterns from a broad range of low frequencies at high amplitudes to a few high frequencies at low amplitudes.

Croll, A.↗

Modeling microbial dynamics in heterogeneous environments: Growth on soil carbon sources

We have developed a new hybrid model to study how microbial dynamics are affected by the heterogeneity in the physical structure of the environment. The modeling framework can represent porous media such as soil. The individual based biological model can explicitly simulate microbial diversity, and cell metabolism is regulated via optimal allocation of cellular resources to enzyme synthesis, control of growth rate by protein synthesis capacity, and shifts to dormancy. This model was developed to study how microbial community functioning is influenced by local environmental conditions and by the functional attributes of individual microbes. Different strategies for acquisition of carbon from polymeric cellulose were investigated. Bacteria that express membrane-associated hydrolase had different growth and survival dynamics in soil pores than bacteria that release extracellular hydrolases. The kinetic differences may suggest different functional roles for these two classes of microbes in cellulose utilization. Our model predicted an emergent behavior in which co-existence led to higher cellulose utilization efficiency and reduced stochasticity. Microbial community dynamics were simulated at two spatial scales: micro-pores that resemble 6-20 {micro}m size portions of the soil physical structure and in 111 {micro}m size soil aggregates with a random pore structure. Trends in dynamic properties were very similar at these two scales, implying that micro-scale studies can be useful approximations to aggregate scale studies when local effects on microbial dynamics are studied.

54 ENVIRONMENTAL SCIENCES↗

Microbial drought resistance may destabilize soil carbon

Droughts are becoming more frequent and intense with climate change. As plants and microbes respond to drought, there may be consequences for the vast stocks of organic carbon stored in soils. If microbes sustain their activity under drought, soils could lose carbon, especially if inputs from plants decline. Empirical and theoretical studies reveal multiple mechanisms of microbial drought resistance, including tolerance and avoidance. Physiological responses allow microbes to acclimate to drought within minutes to days. Along with dispersal, shifts in community composition could allow microbiomes to maintain functioning despite drought. Microbes might also adapt to drier conditions through evolutionary processes. Together, these mechanisms could result in soil carbon losses larger than currently anticipated under climate change.

54 ENVIRONMENTAL SCIENCES↗

{sup 13}C dynamic nuclear polarization for measuring metabolic flux in endothelial progenitor cells

Endothelial progenitor cells (EPCs) represent a heterogeneous cell population that is believed to be involved in vasculogenesis. With the purpose of enhancing endothelial repair, EPCs could have a potential for future cell therapies. Due to the low amount of EPCs in the peripheral circulating blood, in vitro expansion is needed before administration to recipients and the effects of in vitro culturing is still an under-evaluated field with little knowledge of how the cells change over time in culture. The aim of this study was to use hyperpolarised carbon-13 magnetic resonance spectroscopy to profile important metabolic pathways in a population of progenitor cells and to show that cell culturing in 3D scaffolds seem to block the metabolic processes that leads to cell senescence. The metabolic breakdown of hyperpolarized [1-{sup 13}C]pyruvate was followed after injection of the substrate to a bioreactor system with EPCs either adhered to 3D printed scaffolds or kept in cell suspension. The pyruvate-to-lactate conversion was elevated in suspension of EPCs compared to the EPCs adhered to scaffolds. Furthermore in the setup with EPCs in suspension, an increase in lactate production was seen over time indicating that the older the cultures of EPCs was before using the cells for cell suspension experiments, the more lactate they produce, compared to a constant lactate level in the cells adhered to scaffolds. It could therefore be stated that cells grown first in 2D culture and subsequent prepared for cell suspension show a metabolism with higher lactate production consistent with cells senescence processes compared to cells grown first at 2D culture and subsequent in the 3D printed scaffolds, where metabolism shows no sign of metabolic shifting during the monitored period. - Highlights: • Hyperpolarized 13C MRS detects EPCs metabolic changes associated with ageing and cultivating conditions. • Increased lactate production in EPC’s correlates positively with aging. • 2D cultivation show an increased lactate production, while 3D cultivation show a maintained lactate production.

60 APPLIED LIFE SCIENCES↗

Temporal Characteristics of Cloud Radiative Effects on the Greenland Ice Sheet: Discoveries From Multiyear Automatic Weather Station Measurements

The impact of clouds on Greenland's surface melt is difficult to quantify due to the limited amount of in situ observations. To better quantify cloud radiative effects (CRE), we utilize 29 automatic weather stations and provide the first analysis on seasonal and hourly timescales in both accumulation and ablation zones. Seasonal CRE shows opposing cycles across geographical regions. CRE generally increases during melt season in the north of Greenland, mainly due to longwave CRE enhancement by cloud fraction and liquid water. CRE decreases from May to July and increases afterwards in the middle and south of Greenland, mainly due to strengthened shortwave CRE caused by surface albedo reduction. This finding resolves the contrasting seasonal distributions in previous studies at different Arctic locations. Longwave seasonal cycle also shifts from increasing in the north to decreasing in the south, implying spatial variations in cloud and atmospheric conditions. On hourly timescales, longwave downwelling radiation exhibits a bimodal distribution peaking at ~-70 W/m 2 (i.e., clear state) and ~0 W/m 2 (i.e., cloudy state), suggesting that Greenland alternates between fairly clear and overcast. In the cloudy state, CRE strongly correlates with the combined influence of solar zenith angle and albedo (r = 0.85, p < 0.01) probably because clouds are thick enough for CRE to become saturated. The close relationship between CRE and albedo over dark surfaces suggests a stabilizing feedback: Net CRE is negative at low albedo caused by snow melt and snow metamorphism and thus tends to increase albedo and decelerate surface melt.

54 ENVIRONMENTAL SCIENCES↗

A DFT study of chlorine coverage over late transition metals and its implication on 1,2-dichloroethane hydrodechlorination

Atomic chlorine is known to interact strongly with most late transition metal surfaces. This work aims to identify the relevant chlorine coverage under typical 1,2-dichloroethane hydrodechlorination conditions (T = 423–523 K, PHCl = 10-2–101 bar) and its impact on the reaction energetics. Density functional theory calculations (GGA-PW91) were performed to study the adsorption of chlorine up to 1 monolayer over the close-packed facets of 10 late transition metals (Pt, Co, Ni, Cu, Ru, Rh, Pd, Ag, Ir, Au). The ab initio phase diagram of each chlorine/metal system was constructed. The phase diagrams predicted approximately 1/3 ML chlorine coverage on all metals other than Ag and Au, which remain clean surfaces under hydrodechlorination conditions. The presence of surface chlorine was also found to significantly destabilize the adsorption of reaction intermediates, thus shifting the reaction potential energy diagram upwards. Our results emphasize the importance of explicitly including adsorbed chlorine spectators in properly modeling the catalytic surfaces for the 1,2-dichloroethane hydrodechlorination reaction.

Xu, Lang↗