Search NASA⌕ Search

SEARCH · Search NASA

Results for “crystal diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Naphthacene Based Organic Thin Film Transistor With Rare Earth Oxide

Naphthacene based organic thin film transistors (OTFTs) have been fabricated using La{sub 2}O{sub 3}, as the gate insulator. All the OTFTs have been fabricated by the process of thermal evaporation in vacuum on perfectly cleaned glass substrates with aluminium as source-drain and gate electrodes. The naphthacene film morphology on the glass substrate has been studied by XRD and found to be polycrystalline in nature. The field effect mobility, output resistance, amplification factor, transconductance and gain bandwidth product of the OTFTs have been calculated by using theoretical TFT model. The highest value of field effect mobility is found to be 0.07x10{sup -3} cm{sup 2}V{sup -1}s{sup -1} for the devices annealed in vacuum at 90 deg. C for 5 hours.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge Transport Characteristics Of Cobalt Phthalocyanine Thin Films Grown By Molecular Beam Epitaxy

In the recent times organic semiconductors (OSC) have received attention because of their application in low-cost, flexible, and large area electronics devices. The application of OSC thin films has been limited due to their low charge carrier mobility ({approx}0.1 cm{sup 2}/V-s). We have investigated the effect of substrate on structure and charge transport characteristics of cobalt phthalocyanine (CoPc) films. Thin films have been grown on both single crystal (sapphire and LaAlO{sub 3}) and amorphous (quartz) substrates using molecular beam epitaxy system. The films grown on LaAlO{sub 3} substrates exhibited a higher value of mobility ({approx}4 cm{sup 2}/V-s) while those grown on Al{sub 2}O{sub 3} and quartz showed mobility value of {approx}1 cm{sup 2}/V-s. High mobility for LaAlO{sub 3} substrates has been attributed to the enhanced ordering of the molecules due to natural twin boundaries of substrates. In order to further confirm role of grain boundaries in aligning the CoPc molecules, we measured the charge transport on films deposited at bi-crystal SrTiO{sub 3} substrates. The results showed that current along bi-crystal grain boundary is three orders of magnitude higher than for films on SrTiO{sub 3} substrate without grain boundary, which confirms our hypothesis of ordering of molecules along grain boundaries.

36 MATERIALS SCIENCE↗

Nano Materials Under High Pressures

Materials comprising of units or particles of the size of a few nano-meters have significantly different high pressure behavior than their bulk counterparts. This is abundantly elucidated in our studies on transition metals encapsulated in carbon nanotubes. Carbon nanotubes filled with Argon also show that it affects the behavior of tubes as well as argon. Studies on nano-crystalline Si displays an interesting crystalline-amorphous reversible transition, unique of its kind in elemental solids. We also demonstrate that in some cases of nanocrystalline samples, a phase perceived to be an intermediate-transient may be actually realized.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thiols as Effective Capping Molecules to Synthesize High-Quality ZnO Nanocrystals

In our present work, an alternative approach to synthesize Zinc oxide (ZnO) quantum dots (QDs) using simple aqueous route under ambient conditions is reported. ZnO QDs were synthesized using zinc nitrate as a precursor and different thiols as effective capping molecules. The synthesized powders were characterized by XRD and UV-Vis optical absorption. The XRD results indicated that as synthesized ZnO QDs had pure hexagonal wurtzite structure and 2-ME capped ZnO QDs gives smallest sized nanoparticles. All these nanoparticles emit clearly visible blue emission under UV lamp.

36 MATERIALS SCIENCE↗

Nanocrystalline BaSO{sub 4}:Eu For Dosimetry of Proton Beams

Nanocrystalline BaSO{sub 4} doped with Eu, was prepared by the Chemical Co-precipitation method. The particle size was calculated by the broadening of the XRD peaks using Scherrer's formula with particle size around 45 nm. Samples in the form of pellets were irradiated by 150 MeV proton beam with dose range of 0.1 Gy to 325 Gy. Thermoluminescence (TL) glow curves of the irradiated samples were recorded and studied. It has been found that there are two prominent TL glow peaks at 460 K and 495 K. The TL response is sublinear below 1 Gy, linear in the range 1 Gy to 200 Gy and then becomes supralinear for higher doses. The wider linear TL response of nanocrystalline BaSO{sub 4}:Eu and low fading makes it a superior candidate as a dosimeter to be used for detecting the doses of protons for its various applications in the field of space, therapy and research.

61 RADIATION PROTECTION AND DOSIMETRY↗

Dynamics of Water Confined in Synthetic Saponite Clays

The dynamics of water in two synthetic saponite clays (treated by microwave) with different interlayer spacing has been studied using the quasielastic neutron scattering technique. A model in which the molecules undergo random jump diffusion describes the dynamics of water in both clays. The dynamics of water confined in both saponite clays considered here is found to be hindered in comparison to the bulk phase. It is found that diffusivity increases for samples having higher interlayer spacing.

36 MATERIALS SCIENCE↗

Azimuthal reflection high-energy electron diffraction study of MnAs growth on GaAs(001) by molecular beam epitaxy

Azimuthal reflection high-energy electron diffraction (ARHEED) and in situ grazing incidence synchrotron x-ray diffraction techniques are employed to investigate the growth, epitaxial orientation, and interfacial structure of MnAs layers grown on GaAs(001) by molecular beam epitaxy (MBE). We demonstrate the power and reliability of ARHEED scans as a routine tool in characterizing the formation of epitaxial films. The ARHEED scans clearly reveal the formation of the rectangular MnAs unit cell during growth on GaAs(001) for a MnAs layer thickness of 2.1 {+-} 0.2 monolayers with a tensile strain along the MnAs[1120] direction. A periodic coincidence site lattice, which is known to form along the MnAs [0001] direction to release the strain due to the huge lattice mismatch ({approx}30%) also produces periodic satellites of the diffraction spots in the ARHEED scan. The formation of different epitaxial orientations of MnAs during MBE growth can be directly observed using ARHEED scans. ARHEED is demonstrated to have a resolution similar to synchrotron x-ray diffraction with a double crystal monochromator, yielding full width at half maximum values of reflections as small as 0.005 reciprocal lattice units.

36 MATERIALS SCIENCE↗

Growth of M- and A-plane GaN on LiGaO{sub 2} by plasma-assisted MBE

We have performed non-polar M- and A-plane GaN growth on LiGaO{sub 2}(LGO) by plasma-assisted molecular beam expitaxy (MBE). We demonstrate that non-polar GaN growth on LGO yields high phase purity and flat surfaces. We find that annealing of the substrates prior to growth is a suitable method for avoiding a peeling off of the film from the substrate after growth.

36 MATERIALS SCIENCE↗

Evidence for graphite-like hexagonal AlN nanosheets epitaxially grown on single crystal Ag(111)

Ultrathin (sub-monolayer to 12 monolayers) AlN nanosheets are grown epitaxially by plasma assisted molecular beam epitaxy on Ag(111) single crystals. Electron diffraction and scanning tunneling microscopy provide evidence that AlN on Ag adopts a graphite-like hexagonal structure with a larger lattice constant compared to bulk-like wurtzite AlN. This claim is further supported by ultraviolet photoelectron spectroscopy indicating a reduced energy bandgap as expected for hexagonal AlN.

36 MATERIALS SCIENCE↗

Atomic disorder in Gd 2 Zr 2 O 7 pyrochlore

Gd 2 Zr 2 O 7 pyrochlore with different degrees of cation disorder were synthesized by isothermal annealing at various temperatures (1100–1550 °C), and the related changes in the structure were investigated by ambient and high pressure x-ray diffraction (XRD) measurements. Unit cell parameters increase almost linearly with increasing treatment temperature. The degree of cation order in pyrochlore also increases with the increase of temperature, but saturates at ~60%. The compressibility of the pyrochlore structures decreases when the degree of cation order increases. Lastly, high pressure XRD measurements also indicate that the phase stability of Gd 2 Zr 2 O 7 is not very sensitive to the degree of atomic disorder in the pyrochlore structure.

36 MATERIALS SCIENCE↗

High pressure floating zone growth and structural properties of ferrimagnetic quantum paraelectric BaFe{sub 12}O{sub 19}

High quality single crystals of BaFe{sub 12}O{sub 19} were grown using the floating zone technique in 100 atm of flowing oxygen. Single crystal neutron diffraction was used to determine the nuclear and magnetic structures of BaFe{sub 12}O{sub 19} at 4 K and 295 K. At both temperatures, there exist local electric dipoles formed by the off-mirror-plane displacements of magnetic Fe{sup 3+} ions at the bipyramidal sites. The displacement at 4 K is about half of that at room temperature. The temperature dependence of the specific heat shows no anomaly associated with long range polar ordering in the temperature range from 1.90 to 300 K. The inverse dielectric permittivity, 1/ε, along the c-axis shows a T{sup 2} temperature dependence between 10 K and 20 K, with a significantly reduced temperature dependence displayed below 10 K. Moreover, as the sample is cooled below 1.4 K there is an anomalous sharp upturn in 1/ε. These features resemble those of classic quantum paraelectrics such as SrTiO{sub 3}. The presence of the upturn in 1/ε indicates that BaFe{sub 12}O{sub 19} is a critical quantum paraelectric system with Fe{sup 3+} ions involved in both magnetic and electric dipole formation.

36 MATERIALS SCIENCE↗

Structural evolution of epitaxial SrCoO{sub x} films near topotactic phase transition

Control of oxygen stoichiometry in complex oxides via topotactic phase transition is an interesting avenue to not only modifying the physical properties, but utilizing in many energy technologies, such as energy storage and catalysts. However, detailed structural evolution in the close proximity of the topotactic phase transition in multivalent oxides has not been much studied. In this work, we used strontium cobaltites (SrCoO{sub x}) epitaxially grown by pulsed laser epitaxy (PLE) as a model system to study the oxidation-driven evolution of the structure, electronic, and magnetic properties. We grew coherently strained SrCoO{sub 2.5} thin films and performed post-annealing at various temperatures for topotactic conversion into the perovskite phase (SrCoO{sub 3-δ}). We clearly observed significant changes in electronic transport, magnetism, and microstructure near the critical temperature for the topotactic transformation from the brownmillerite to the perovskite phase. Nevertheless, the overall crystallinity was well maintained without much structural degradation, indicating that topotactic phase control can be a useful tool to control the physical properties repeatedly via redox reactions.

36 MATERIALS SCIENCE↗

Synthesis, crystal structure and physical properties of the solid solutions Ca 14– x RE x CdSb 11 ( RE = La–Nd, Sm, Gd–Yb, x ≈ 0.85±0.15)

This article presents new antimonides represented with the general formula Ca 14– x RE x CdSb 11 ( RE =La–Nd, Sm, Gd–Yb, x ≈ 0.85±0.15). The 12 studied compounds constitute a nearly complete series of rare-earth metal substituted variants of the ternary Ca 14 CdSb 11 phase. All have been synthesized from the respective elements, employing high-temperature reactions under molten flux conditions. The structures have been fully characterized by single-crystal X-ray diffraction methods. All materials crystallize in the tetragonal Ca 14 AlSb 11 structure type (space group I 4 1 / acd , No. 142, Z =8). Rare-earth element atoms randomly substitute Ca atoms on the four available crystallographic sites, with a noted preference for the Ca2 site in case of the light (La–Nd) rare-earth elements and the Ca1 site in case of the heavier (Sm, Gd–Yb) ones. The electronic structure calculations and resistivity measurements indicate title compounds as degenerated semiconductors. Magnetization measurements at varied temperature show Curie-Weiss paramagnetic behavior consistent with local-moment magnetism due to the 3+ ground state for the rare-earth metal ions. In the case of the Yb-containing sample, a mixed-valence Yb 2+/3+ state is apparent. Furthermore, the measured charge transport properties suggest small bandgap degenerate semiconductor-like behavior and suitability for thermoelectrics.

36 MATERIALS SCIENCE↗

All polymer microfluidic chips—A fixed target sample delivery workhorse for serial crystallography

The development of x-ray free electron laser (XFEL) light sources and serial crystallography methodologies has led to a revolution in protein crystallography, enabling the determination of previously unobtainable protein structures and near-atomic resolution of otherwise poorly diffracting protein crystals. However, to utilize XFEL sources efficiently demands the continuous, rapid delivery of a large number of difficult-to-handle microcrystals to the x-ray beam. A recently developed fixed-target system, in which crystals of interest are enclosed within a sample holder, which is rastered through the x-ray beam, is discussed in detail in this Perspective. The fixed target is easy to use, maintains sample hydration, and can be readily modified to allow a broad range of sample types and different beamline requirements. Recent innovations demonstrate the potential of such microfluidic-based fixed targets to be an all-around “workhorse” for serial crystallography measurements. In conclusion, this Perspective will summarize recent advancements in microfluidic fixed targets for serial crystallography, examine needs for future development, and guide users in designing, choosing, and utilizing a fixed-target sample delivery device for their system.

59 BASIC BIOLOGICAL SCIENCES↗

Solving the structure of Lgl2, a difficult blind test of unsupervised structure determination

In the companion paper by Ufimtsev and Levitt [Ufimtsev IS, Levitt M (2019) Proc Natl Acad Sci USA , 10.1073/pnas.1821512116], we presented a method for unsupervised solution of protein crystal structures and demonstrated its utility by solving several test cases of known structure in the 2.9- to 3.45-Å resolution range. Here we apply this method to solve the crystal structure of a 966-amino acid construct of human lethal giant larvae protein (Lgl2) that resisted years of structure determination efforts, at 3.2-Å resolution. The structure was determined starting with a molecular replacement (MR) model identified by unsupervised refinement of a pool of 50 candidate MR models. This initial model had 2.8-Å RMSD from the solution. The solved structure was validated by comparison with a model subsequently derived from an alternative crystal form diffracting to higher resolution. This model could phase an anomalous difference Fourier map from an Hg derivative, and a single-wavelength anomalous dispersion phased density map made from these sites aligned with the refined structure.

59 BASIC BIOLOGICAL SCIENCES↗

Structure-driven development of a biomimetic rare earth artificial metalloprotein

The 2011 discovery of the first rare earth–dependent enzyme in methylotrophic Methylobacterium extorquens AM1 prompted intensive research toward understanding the unique chemistry at play in these systems. This enzyme, an alcohol dehydrogenase (ADH), features a La 3+ ion closely associated with redox-active coenzyme pyrroloquinoline quinone (PQQ) and is structurally homologous to the Ca 2+ -dependent ADH from the same organism. AM1 also produces a periplasmic PQQ-binding protein, PqqT, which we have now structurally characterized to 1.46-Å resolution by X-ray diffraction. This crystal structure reveals a Lys residue hydrogen-bonded to PQQ at the site analogously occupied by a Lewis acidic cation in ADH. Accordingly, we prepared K 142 A- and K 142 D-PqqT variants to assess the relevance of this site toward metal binding. Isothermal titration calorimetry experiments and titrations monitored by UV–Vis absorption and emission spectroscopies support that K 142 D-PqqT binds tightly (Kd = 0.6 ± 0.2 μM) to La 3+ in the presence of bound PQQ and produces spectral signatures consistent with those of ADH enzymes. These spectral signatures are not observed for WT- or K 142 A-variants or upon addition of Ca 2+ to PQQ ⸦ K 142 D-PqqT. Addition of benzyl alcohol to La 3+ -bound PQQ ⸦ K 142 D-PqqT (but not Ca 2+ -bound PQQ ⸦ K 142 D-PqqT, or La 3+ -bound PQQ ⸦ WT-PqqT) produces spectroscopic changes associated with PQQ reduction, and chemical trapping experiments reveal the production of benzaldehyde, supporting ADH activity. By creating a metal binding site that mimics native ADH enzymes, we present a rare earth-dependent artificial metalloenzyme primed for future mechanistic, biocatalytic, and biosensing applications.

Science & Technology - Other Topics↗