Search NASA⌕ Search

SEARCH · Search NASA

Results for “data guidelines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

A Population Pharmacokinetic Model for Disposition in Plasma, Saliva and Urine of Scopolamine after Intranasal Administration to Healthy Human Subjects

An intranasal gel formulation of scopolamine (INSCOP) was developed for the treatment of Space Motion Sickness. The bioavailability and pharmacokinetics (PK) were evaluated under the Food and Drug Administration guidelines for clinical trials with an Investigative New Drug (IND) protocol. The aim of this project was to develop a PK model that can predict the relationship between plasma, saliva and urinary scopolamine concentrations using data collected from the IND clinical trials with INSCOP. Methods: Twelve healthy human subjects were administered three dose levels (0.1, 0.2 and 0.4 mg) of INSCOP. Serial blood, saliva and urine samples were collected between 5 min and 24 h after dosing and scopolamine concentrations were measured by using a validated LC‐MS‐MS assay. Pharmacokinetic Compartmental models, using actual dosing and sampling times, were built using Phoenix (version 1.2). Model selection was based on the likelihood ratio test on the difference of criteria (‐2LL) and comparison of the quality of fit plots. Results: The best structural model for INSCOP (minimal ‐2LL= 502.8) was established. It consisted of one compartment each for plasma, saliva and urine, respectively, which were connected with linear transport processes except the nonlinear PK process from plasma to saliva compartment. The best‐fit estimates of PK parameters from individual PK compartmental analysis and Population PK model analysis were shown in Tables 1 and 2, respectively. Conclusion: A population PK model that could predict population and individual PK of scopolamine in plasma, saliva and urine after dosing was developed and validated. Incorporating a non‐linear transfer from plasma to saliva compartments resulted in a significantly improved model fitting. The model could be used to predict scopolamine plasma concentrations from salivary and urinary drug levels, allowing non‐invasive therapeutic monitoring of scopolamine in space and other remote environments.

Wu, L.↗

Historical Mass, Power, Schedule, and Cost Growth for NASA Spacecraft

Although spacecraft developers have been moving towards standardized product lines as the aerospace industry has matured, NASA's continual need to push the cutting edge of science to accomplish unique, challenging missions can still lead to spacecraft resource growth over time. This paper assesses historical mass, power, cost, and schedule growth for multiple NASA spacecraft from the last twenty years and compares to industry reserve guidelines to understand where the guidelines may fall short. Growth is assessed from project start to launch, from the time of the preliminary design review (PDR) to launch and from the time of the critical design review (CDR) to launch. Data is also assessed not just at the spacecraft bus level, but also at the subsystem level wherever possible, to help obtain further insight into possible drivers of growth. Potential recommendations to minimize spacecraft mass, power, cost, and schedule growth for future missions are also discussed.

Schedule↗

Sealed source peer review plan

Sealed sources are known quantities of radioactive materials that have been encapsulated in quantities that produce known radiation fields. Sealed sources have multiple uses ranging from instrument calibration sources to sources that produce radiation fields for experimental applications. The Off-Site Source Recovery (OSR) Project at Los Alamos National Laboratory (LANL), created in 1999, under the direction of the Waste Management Division of the U.S. Department of Energy (DOE) Albuquerque has been assigned the responsibility to recover and manage excess and unwanted radioactive sealed sources from the public and private sector. LANL intends to ship drums containing qualified sealed sources to the Waste Isolation Pilot Plant (WIPP) for disposal. Prior to shipping, these drums must be characterized with respect to radiological content and other parameters. The U. S. Environmental Protection Agency (EPA) requires that ten radionulcides be quantified and reported for every container of waste to be disposed in the WIPP. The methods traditionally approved by the EPA include non-destructive assay (NDA) in accordance with Appendix A of the Contact-Handled Transuranic Waste Acceptance Criteria for the Waste Isolation Pilot Plant (DOE, 2002) (CH WAC). However, because of the nature and pedigree of historical records for sealed sources and the technical infeasibility of performing NDA on these sources, LANL proposes to characterize the content of these waste drums using qualified existing radiological data in lieu of direct measurement. This plan describes the process and documentation requirements for the use of the peer review process to qualify existing data for sealed radiological sources in lieu of perfonning radioassay. The peer review process will be performed in accordance with criteria provided in 40 CFR {section} 194.22 which specifies the use of the NUREG 1297 guidelines. The plan defines the management approach, resources, schedule, and technical requirements for the subject peer review.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

One Decade Later: Trends and Disparities in the Application of Post-Mastectomy Radiotherapy Since the Release of the American Society of Clinical Oncology Clinical Practice Guidelines

Purpose: In 2001 ASCO published practice guidelines for post mastectomy radiotherapy (PMRT). We analyzed factors that influence the receipt of radiotherapy therapy and trends over time. Methods and Materials: We analyzed 8889 women who underwent mastectomy as primary surgical treatment for stage II or III breast cancer between 1995 and 2008 using data from the Kentucky Cancer Registry. We categorized patients according to ASCO group: group 1, PMRT not routinely recommended (T2, N0); group 2, PMRT controversial/evidence insufficient (T1-2, N1); group 3, PMRT recommended or suggested (T3-4 or N2-3). Probability of receiving PMRT was assessed using logistic regression. Results: Overall, 24.0% of women received PMRT over the study period. The rates of PMRT for group 1, 2, and 3 were 7.5%, 19.5%, and 47.3%, respectively. Since 2001, there was an increase in the use of PMRT (from 21.1%-26.5%, P<.0001), which occurred mainly among group 3 members (from 40.8%-51.2%, P<.0001). The average rate remained constant in group 1 (from 7.1%-7.4%, P=.266) and decreased in group 2 (from 20.0%-18.1%, P<.0001). On multivariate analysis, the rate of PMRT was significantly lower for women aged >70 years (vs. younger), rural Appalachia (vs. non-Appalachia) populations, and Medicaid (vs. privately insured) patients. Conclusions: ASCO guidelines have influenced practice in an underserved state; however PMRT remains underused, even for highest-risk patients. Barriers exist for elderly, rural and poor patients, which independently predict for lack of adequate care. Updated guidelines are needed to clarify the use of PMRT for patients with T1-2, N1 disease.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

INFL Guideline On X-Ray Diffraction (XRD)

X-Ray Diffraction (XRD) is an analytical technique used to identify crystalline compounds. It is a bulk technique, though the volume of material sampled is relatively small (approximately 0.01 cm3 ). Specimens are typically examined in the form of powders or solid pieces. XRD data gives precise information about the crystal structure of the material examined, which can be compared to large open databases of crystal structures. The quality of matches of the analyte data to the database can be rigorously quantified. In the case of mixtures of compounds, the relative amounts of each compound can be calculated, although significant errors may exist. In general, XRD is a rapid, easy to use, and robust way to identify materials. It is a widely used and mature technology, with considerable flexibility.

36 MATERIALS SCIENCE↗

NASA's Responsible AI Plan

Artificial Intelligence (AI) is an integral part of today’s process of conducting science and technology development. At NASA, AI has become an integral and important tool for researchers, engineers, data scientists, and technologists in pursuing the ground-breaking discoveries that we are known for, including the command and controlling of our spacecraft and other supporting infrastructures. Consequently, research and engineering efforts incorporating AI have permeated almost every area of our work. It is contributing to NASA’s drive toward the future, not just of space science, but for society here at home. We are dedicated to continuing the use of AI in a safe and fully transparent approach so that the public can have high confidence in the outcomes and benefits. We believe that the plan outlined here will be responsive and contribute to the call for openness across the federal government. NASA is committed to responsible use of AI in all of its activities and in all phases of development and deployment of its space and terrestrial programs missions. NASA does not deliberately focus on “AI Research” as a separate field (we have no single “AI office” or “AI program”), rather NASA uses AI to build tools for its programs. This plan, being put forward, adheres to the Responsible AI (RAI) principles set and laid down by the White House in its Presidential Executive Order 13960. Our research, engineering and technical communities have been made aware of these guidelines and we are committed to an on-going process of educating and monitoring its implementation to ensure adherence to those principles. The vast majority of NASA’s use cases, which number almost 75 today, are geared toward analyzing the petabytes of data that NASA collects from its fleet of spacecraft across all disciplines, in human space exploration, and in aeronautics, etc.

Artificial Intelligence↗

SU-F-T-399: Migration of Treatment Planning Systems Without Beam Data Measurement

Purpose: Data acquisition for commissioning is steered by Treatment Planning System (TPS) requirements which can be cumbersome and time consuming involving significant clinic downtime. The purpose of this abstract is to answer if we could circumvent this by extracting data from existing TPS and speed up the process. Methods: Commissioning beam data was obtained from a clinically commissioned TPS (Pinnacle™) using Matlab™ generated Pinnacle™ executable scripts to commission a secondary 3D dose verification TPS (Eclipse™). Profiles and output factors for commissioning as required by Eclipse™ were computed on a 50 cm{sup 3} water phantom at a dose grid resolution of 2mm3. Verification doses were computed and compared to clinical TPS dose profiles as per TG-106 guidelines. Standard patient plans from Pinnacle™ including IMRT and VMAT plans were re-computed keeping the same monitor units (in order to perform true comparison) using Eclipse™. Computed dose was exported back to Pinnacle for comparison to original plans. This methodology enables us to alleviate all ambiguities that arise in such studies. Results: Profile analysis using in-house software for 6x, showed that for all field sizes including small MLC generated fields, 100% of infield and penumbra data points of Eclipse™ match Pinnacle™ generated and measured profiles with 2%/2 mm gamma criteria. Excellent agreement was observed in the penumbra regions, with all data points passing DTA criteria for complex C-shaped and S-shaped profiles. Patient plan dose volume histograms (DVHs) and isodose lines agreed well to within a 1.5% for target coverage. Conclusion: Secondary 3D dose checking is of utmost importance with advanced techniques such as IMRT and VMAT. Migration of TPS is possible without compromising accuracy or enduring the cumbersome measurement of commissioning data. Economizing time for commissioning such a verification system or for migration of TPS can add great QA value and minimize downtime.

60 APPLIED LIFE SCIENCES↗

Data Quality Objectives Supporting Radiological Air Emissions Monitoring for the PNNL Site

This document of Data Quality Objectives (DQOs) was prepared based on the U.S. Environmental Protection Agency (EPA) Guidance on Systematic Planning Using the Data Quality Objectives Process, EPA, QA/G4, 2/2006 (EPA 2006) as well as several other published DQOs. Pacific Northwest National Laboratory (PNNL) is in the process of developing a radiological air monitoring program for the PNNL Site that is distinct from that of the nearby Hanford Site. Radiological emissions at the PNNL Site result from Physical Sciences Facility (PSF) major emissions units. A team was established to determine how the PNNL Site would meet federal regulations and address guidelines developed to monitor and estimate offsite air emissions of radioactive materials. The result is a program that monitors the impact to the public from the PNNL Site.

Data Quality Objectives, Environmental Monitoring,↗

Nanotoxicology and in vitro studies: The need of the hour

Nanotechnology is considered as one of the key technologies of the 21st century and promises revolution in our world. Objects at nano scale, take on novel properties and functions that differ markedly from those seen in the corresponding bulk counterpart primarily because of their small size and large surface area. Studies have revealed that the same properties that make nanoparticles so unique could also be responsible for their potential toxicity. Nanotechnology is rapidly advancing, with more than 1000 nanoproducts already on the market. Considering the fact that intended as well as unintended exposure to nanomaterials is increasing and presently no clear regulatory guideline(s) on the testing/evaluation of nanoparticulate materials are available, the in vitro toxicological studies become extremely relevant and important. This review presents a summary of nanotoxicology and a concise account of the in vitro toxicity data on nanomaterials. For nanomaterials to move into the applications arena, it is important that nanotoxicology research uncovers and understands how these multiple factors influence their toxicity so that the ensuing undesirable effects can be avoided.

60 APPLIED LIFE SCIENCES↗

Predicting radiative transport properties of plasma sprayed porous ceramics

The typical yttria-stabilized zirconia material for making the thermal barrier coatings (TBCs) is intrinsically semitransparent to thermal radiation, and the unique disordered microstructures in TBCs make them surprisingly highly scattering. To quantitatively understand the influence of disordered microstructures, this paper presents a quantitative prediction on the radiative properties, especially the transport scattering coefficient of plasma sprayed TBC based on microstructure analysis and rigorous electromagnetic theory. The impact of the porosity, shape, size, and orientation of different types of voids on transport scattering coefficient is comprehensively investigated under the discrete dipole approximation. An inverse model integrating these factors together is then proposed to quantitatively connect transport scattering coefficient with microstructural information, which is also validated by available experimental data. Afterwards, an optimization procedure is carried out based on this model to obtain the optimal size and orientation distribution of the microscale voids to achieve the maximal radiation insulation performance at different operating temperatures, providing guidelines for practical coating design and fabrication. This work suggests that the current model is effective and also efficient for connecting scattering properties to microstructures and can be implemented as a quantitative tool for further studies like non-destructive infrared imaging as well as micro/nanoscale thermal design of TBCs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SU-E-J-244: Development and Validation of a Knowledge Based Planning Model for External Beam Radiation Therapy of Locally Advanced Non-Small Cell Lung Cancer

Purpose: The study aims to develop and validate a knowledge based planning (KBP) model for external beam radiation therapy of locally advanced non-small cell lung cancer (LA-NSCLC). Methods: RapidPlan™ technology was used to develop a lung KBP model. Plans from 65 patients with LA-NSCLC were used to train the model. 25 patients were treated with VMAT, and the other patients were treated with IMRT. Organs-at-risk (OARs) included right lung, left lung, heart, esophagus, and spinal cord. DVH and geometric distribution DVH were extracted from the treated plans. The model was trained using principal component analysis and step-wise multiple regression. Box plot and regression plot tools were used to identify geometric outliers and dosimetry outliers and help fine-tune the model. The validation was performed by (a) comparing predicted DVH boundaries to actual DVHs of 63 patients and (b) using an independent set of treatment planning data. Results: 63 out of 65 plans were included in the final KBP model with PTV volume ranging from 102.5cc to 1450.2cc. Total treatment dose prescription varied from 50Gy to 70Gy based on institutional guidelines. One patient was excluded due to geometric outlier where 2.18cc of spinal cord was included in PTV. The other patient was excluded due to dosimetric outlier where the dose sparing to spinal cord was heavily enforced in the clinical plan. Target volume, OAR volume, OAR overlap volume percentage to target, and OAR out-of-field volume were included in the trained model. Lungs and heart had two principal component scores of GEDVH, whereas spinal cord and esophagus had three in the final model. Predicted DVH band (mean ±1 standard deviation) represented 66.2±3.6% of all DVHs. Conclusion: A KBP model was developed and validated for radiotherapy of LA-NSCLC in a commercial treatment planning system. The clinical implementation may improve the consistency of IMRT/VMAT planning.

60 APPLIED LIFE SCIENCES↗

Charliecloud

Charliecloud is a set of scripts to let users run a virtual cluster of virtual machines (VMs) on a desktop or supercomputer. Key functions include: 1. Creating (typically by installing an operating system from vendor media) and updating VM images; 2. Running a single VM; 3. Running multiple VMs in a virtual cluster. The virtual machines can talk to one another over the network and (in some cases) the outside world. This is accomplished by calling external programs such as QEMU and the Virtual Distributed Ethernet (VDE) suite. The goal is to let users have a virtual cluster containing nodes where they have privileged access, while isolating that privilege within the virtual cluster so it cannot affect the physical compute resources. Host configuration enforces security; this is not included in Charliecloud, though security guidelines are included in its documentation and Charliecloud is designed to facilitate such configuration. Charliecloud manages passing information from host computers into and out of the virtual machines, such as parameters of the virtual cluster, input data specified by the user, output data from virtual compute jobs, VM console display, and network connections (e.g., SSH or X11). Parameters for the virtual cluster (number of VMs, RAM and disk per VM, etc.) are specified by the user or gathered from the environment (e.g., SLURM environment variables). Example job scripts are included. These include computation examples (such as a "hello world" MPI job) as well as performance tests. They also include a security test script to verify that the virtual cluster is appropriately sandboxed. Tests include: 1. Pinging hosts inside and outside the virtual cluster to explore connectivity; 2. Port scans (again inside and outside) to see what services are available; 3. Sniffing tests to see what traffic is visible to running VMs; 4. IP address spoofing to test network functionality in this case; 5. File access tests to make sure host access permissions are enforced. This test script is not a comprehensive scanner and does not test for specific vulnerabilities. Importantly, no information about physical hosts or network topology is included in this script (or any of Charliecloud); while part of a sensible test, such information is specified by the user when the test is run. That is, one cannot learn anything about the LANL network or computing infrastructure by examining Charliecloud code.

Priedhorsky, Reid↗

Land Surface Temperature from GOES-East and GOES-West

Land surface temperature (LST) is an important climate parameter that controls the surface energy budget. For climate applications, information is needed at the global scale with representation of the diurnal cycle. To achieve global coverage there is a need to merge about five independent geostationary (GEO) satellites that have different observing capabilities. An issue of practical importance is the merging of independent satellite observations in areas of overlap. An optimal approach in such areas could eliminate the need for redundant computations by differently viewing satellites. We use a previously developed approach to derive information on LST from GOES-East (GOES-E), modify it for application to GOES-West (GOES-W) and implement it simultaneously across areas of overlap at 5-km spatial resolution. We evaluate the GOES-based LST against in situ observations and an independent MODIS product for the period of 2004–09. The methodology proposed minimizes differences between satellites in areas of overlap. The mean and median values of the differences in monthly mean LST retrieved from GOES-E and GOES-W at 0600 UTC for July are 0.01 and 0.11 K, respectively. Similarly, at 1800 UTC the respective mean and median value of the differences were 0.15 and 1.33 K. These findings can provide guidelines for potential users to decide whether the reported accuracy based on one satellite alone, meets their needs in area of overlap. Since the 6 yr record of LST was produced at hourly time scale, the data are well suited to address scientific issues that require the representation of LST diurnal cycle or the diurnal temperature range (DTR).

54 ENVIRONMENTAL SCIENCES↗

Physiological Responses of Populus trichocarpa to Warming

This data set contains empirical physiological, morphological, and chemical data collected over time on Western Black Cottonwood (Populs trichocarpa Torr. & A.Gray ex Hook., Salicaceae) clones, between July and December 2019 at Oak Ridge National Lab. The project was designed to experimentally warm P. trichocarpa clones and assess their physiological acclimation of leaves versus roots. Branch cuttings of the Nisqually-1 genotype were obtained from the US Department of Energy Joint Genome Institute (JGI) in Stanford, California, and propagated in leach tubes. Ninety genetically identical clones were planted into specially constructed mesocosm growth boxes and grown for an initial six weeks in the greenhouse, and then grown at three temperature treatments for ten weeks. The daytime air temperatures of treatments were approximately 25°C, 29°C, and 33°C. Measurements on plant physiology and growth were conducted at various intervals throughout the experiment. This dataset contains nine data files in comma separate (*.csv) format.

54 ENVIRONMENTAL SCIENCES↗

Mercury in the environment

Problems in assessing mercury concentrations in environmental materials are discussed. Data for situations involving air, water, rocks, soils, sediments, sludges, fossil fuels, plants, animals, foods, and man are drawn together and briefly evaluated. Details are provided regarding the toxicity of mercury along with tentative standards and guidelines for mercury in air, drinking water, and food.

Fulkerson, W.↗

Recent research related to prediction of stall/spin characteristics of fighter aircraft

The NASA Langley Research Center is currently engaged in a stall/spin research program to provide the fundamental information and design guidelines required to predict the stall/spin characteristics of fighter aircraft. The prediction methods under study include theoretical spin prediction techniques and piloted simulation studies. The paper discusses the overall status of theoretical techniques including: (1) input data requirements, (2) math model requirements, and (3) correlation between theoretical and experimental results. The Langley Differential Maneuvering Simulator (DMS) facility has been used to evaluate the spin susceptibility of several current fighters during typical air combat maneuvers and to develop and evaluate the effectiveness of automatic departure/spin prevention concepts. The evaluation procedure is described and some of the more significant results of the studies are presented.

Nguyen, L. T.↗

Some principles for studying reduced visibility conditions in regions around airports

A set of guidelines based on the experiences of the meteorological team at Tashkent airport is presented. These guidelines pertain to all the possible immediate and specific sources of relevant information in the vicinity of a given airport and to the combination of theoretical and experimental information which should be used in evaluating the data.

Romanov, N. N.↗

Quantitative non-destructive testing

The work undertaken during this period included two primary efforts. The first is a continuation of theoretical development from the previous year of models and data analyses for NDE using the Optical Thermal Infra-Red Measurement System (OPTITHIRMS) system, which involves heat injection with a laser and observation of the resulting thermal pattern with an infrared imaging system. The second is an investigation into the use of the thermoelastic effect as an effective tool for NDE. As in the past, the effort is aimed towards NDE techniques applicable to composite materials in structural applications. The theoretical development described produced several models of temperature patterns over several geometries and material types. Agreement between model data and temperature observations was obtained. A model study with one of these models investigated some fundamental difficulties with the proposed method (the primitive equation method) for obtaining diffusivity values in plates of thickness and supplied guidelines for avoiding these difficulties. A wide range of computing speeds was found among the various models, with a one-dimensional model based on Laplace's integral solution being both very fast and very accurate.

Welch, C. S.↗