Search NASA⌕ Search

SEARCH · Search NASA

Results for “dimensional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Terahertz signal detection in a short gate length field-effect transistor with a two-dimensional electron gas

We consider the problem of non-resonant detection of terahertz signals in a short gate length field-effect transistor having a two-dimensional electron channel with zero external bias between the source and the drain. The channel resistance, gate-channel capacitance, and quadratic nonlinearity parameter of the transistor during detection as a function of the gate bias voltage are studied. Characteristics of detection of the transistor connected in an antenna with real impedance are analyzed. The consideration is based on both a simple one-dimensional model of the transistor and allowance for the two-dimensional distribution of the electric field in the transistor structure. The results given by the different models are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multi-dimensional rheology-based two-phase model for sediment transport and applications to sheet flow and pipeline scour

Sediment transport is fundamentally a two-phase phenomenon involving fluid and sediments; however, many existing numerical models are one-phase approaches, which are unable to capture the complex fluid-particle and inter-particle interactions. In the last decade, two-phase models have gained traction; however, there are still many limitations in these models. For example, several existing two-phase models are confined to one-dimensional problems; in addition, the existing two-dimensional models simulate only the region outside the sand bed. This paper develops a new three-dimensional two-phase model for simulating sediment transport in the sheet flow condition, incorporating recently published rheological characteristics of sediments. The enduring-contact, inertial, and fluid viscosity effects are considered in determining sediment pressure and stresses, enabling the model to be applicable to a wide range of particle Reynolds number. A k − ε turbulence model is adopted to compute the Reynolds stresses. In addition, a novel numerical scheme is proposed, thus avoiding numerical instability caused by high sediment concentration and allowing the sediment dynamics to be computed both within and outside the sand bed. The present model is applied to two classical problems, namely, sheet flow and scour under a pipeline with favorable results. For sheet flow, the computed velocity is consistent with measured data reported in the literature. For pipeline scour, the computed scour rate beneath the pipeline agrees with previous experimental observations. However, the present model is unable to capture vortex shedding; consequently, the sediment deposition behind the pipeline is overestimated. Sensitivity analyses reveal that model parameters associated with turbulence have strong influence on the computed results.

42 ENGINEERING↗

SASI ACTIVITY IN THREE-DIMENSIONAL NEUTRINO-HYDRODYNAMICS SIMULATIONS OF SUPERNOVA CORES

The relevance of the standing accretion shock instability (SASI) compared to neutrino-driven convection in three-dimensional (3D) supernova-core environments is still highly controversial. Studying a 27 M{sub Sun} progenitor, we demonstrate, for the first time, that violent SASI activity can develop in 3D simulations with detailed neutrino transport despite the presence of convection. This result was obtained with the PROMETHEUS-VERTEX code with the same sophisticated neutrino treatment so far used only in one-dimensional and two-dimensional (2D) models. While buoyant plumes initially determine the nonradial mass motions in the postshock layer, bipolar shock sloshing with growing amplitude sets in during a phase of shock retraction and turns into a violent spiral mode whose growth is only quenched when the infall of the Si/SiO interface leads to strong shock expansion in response to a dramatic decrease of the mass accretion rate. In the phase of large-amplitude SASI sloshing and spiral motions, the postshock layer exhibits nonradial deformation dominated by the lowest-order spherical harmonics (l = 1, m = 0, {+-}1) in distinct contrast to the higher multipole structures associated with neutrino-driven convection. We find that the SASI amplitudes, shock asymmetry, and nonradial kinetic energy in three dimensions can exceed those of the corresponding 2D case during extended periods of the evolution. We also perform parameterized 3D simulations of a 25 M{sub Sun} progenitor, using a simplified, gray neutrino transport scheme, an axis-free Yin-Yang grid, and different amplitudes of random seed perturbations. They confirm the importance of the SASI for another progenitor, its independence of the choice of spherical grid, and its preferred growth for fast accretion flows connected to small shock radii and compact proto-neutron stars as previously found in 2D setups.

79 ASTRONOMY AND ASTROPHYSICS↗

Effects of disorder on quantum fluctuations and superfluid density of a Bose-Einstein condensate in a two-dimensional optical lattice

We investigate a Bose-Einstein condensate (BEC) trapped in a two-dimensional optical lattice in the presence of weak disorder within the framework of the Bogoliubov theory. In particular, we analyze the combined effects of disorder and an optical lattice on quantum fluctuations and superfluid density of the BEC system. Accordingly, the analytical expressions of the ground-state energy and quantum depletion of the system are obtained. Our results show that the lattice still induces a characteristic three-dimensional (3D) to one-dimensional crossover in the behavior of quantum fluctuations, despite the presence of weak disorder. Furthermore, we use the linear response theory to calculate the normal fluid density of the condensate induced by disorder. Our results in the 3D regime show that the combined presence of disorder and lattice induce a normal fluid density that asymptotically approaches 4/3 of the corresponding condensate depletion. Conditions for possible experimental realization of our scenario are also proposed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optically trapped quasi-two-dimensional Bose gases in a random environment: Quantum fluctuations and superfluid density

We investigate a dilute Bose gas confined in a tight one-dimensional (1D) optical lattice plus a superimposed random potential at zero temperature. Accordingly, the ground-state energy, quantum depletion, and superfluid density are calculated. The presence of the lattice introduces a crossover to the quasi-two-dimensional (2D) regime, where we analyze asymptotically the 2D behavior of the system, particularly the effects of disorder. We thereby offer an analytical expression for the ground-state energy of a purely 2D Bose gas in a random potential. The obtained disorder-induced normal fluid density n{sub n} and quantum depletion n{sub d} both exhibit a characteristic 1/ln(1/n{sub 2D}a{sub 2D}{sup 2}) dependence. Their ratio n{sub n}/n{sub d} increases to 2 compared to the familiar 4/3 in lattice-free three-dimensional (3D) geometry, signifying a more pronounced contrast between superfluidity and Bose-Einstein condensation in low dimensions. The conditions for possible experimental realization of our scenario are also proposed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Wake effect and stopping power for a charged ion moving in magnetized two-component plasmas: Two-dimensional particle-in-cell simulation

A two-dimensional particle-in-cell (PIC) model is proposed to study the wake field and stopping power induced by a nonrelativistic charged particle moving perpendicular to the external magnetic field in two-component plasmas. The effects of the magnetic field on the wake potential and the stopping due to the polarization of both the plasma ions and electrons are discussed. The velocity fields of plasma ions and electrons are investigated, respectively, in the weak and strong magnetic field cases. Our simulation results show that in the case of weak magnetic field and high ion velocity, the wakes exhibit typical V-shaped cone structures and the opening cone angles decrease with the increasing ion velocity. As the magnetic field becomes strong, the wakes lose their typical V-shaped structures and become highly asymmetrical. Similar results can be obtained in the case of low ion velocity and strong magnetic field. In addition, stopping power is calculated and compared with previous one-dimensional and full three-dimensional PIC results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the Energy of a “Two-Dimensional” Two-Electron Atom

With the use of the known solution of the Schrödinger equation for an electron in the nucleus field in the polar coordinates, the energy of a “two-dimensional” two-electron atom in the ground state, as well as its single ionization energy, has been calculated both in perturbation theory and with an almost century-old method of variation of the parameter Z in a trial wavefunction of the ground state. Since such two-dimensional atoms, e.g., helium atoms, can in principle be implemented in experiments by “freezing” of one degree of freedom in the phase of Bose–Einstein condensate, the conclusions made in this work can be tested. Fundamental features of the calculation of the energy of “one-dimensional” two-electron atoms and the formation of their Bose–Einstein condensate have also been discussed. The results obtained in this work coincide in a number of particular cases with the results obtained in a previous work, where some results were absent.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two-Dimensional Hydrogen-like Atom: Photon Emission and Relativistic Energy Corrections

Using the well-known solution Ψ{sub S} of the Schrödinger equation for an electron in the field of a nucleus (Ze) in polar coordinates, via which the spin-state-dependent Dirac spinor Ψ{sub ±} obtained here is expressed, and by extending the QED methods to subspace {0; 1, 2}, we have calculated the probability of single-photon emission by a two-dimensional hydrogen-like atom with allowance made for the polarization and spin states. Relativistic energy corrections ∼(Zα){sup 4} to the energy value have also been found. We show that the so-called contact interaction typical of a three-dimensional hydrogen-like atom also takes place in the twodimensional case, while the ordinary three-dimensional spin–orbit interaction is absent altogether.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Three-dimensional profilometry using a Dammann grating

We propose three-dimensional (3D) profilometry based on a Fourier transform in which a two-dimensional (2D) Dammann grating and a cylindrical lens are used to generate structured light. The Dammann grating splits most of the illumination power into a 2D diffractive spot matrix. The cylindrical lens transforms these 2D diffractive spots into one-dimensional fringe lines that are projected on an object. The produced projection fringes have the advantages of high brightness and high contrast and compression ratios. The experiments have verified the proposed 3D profilometry. The 3D profilometry using Dammann grating should be of high interest for practical applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Efficient evaluation of small failure probability in high-dimensional groundwater contaminant transport modeling via a two-stage Monte Carlo method

In decision-making for groundwater management and contamination remediation, it is important to accurately evaluate the probability of the occurrence of a failure event. For small failure probability analysis, a large number of model evaluations are needed in the Monte Carlo (MC) simulation, which is impractical for CPU-demanding models. One approach to alleviate the computational cost caused by the model evaluations is to construct a computationally inexpensive surrogate model instead. However, using a surrogate approximation can cause an extra error in the failure probability analysis. Furthermore, constructing accurate surrogates is challenging for high-dimensional models, i.e., models containing many uncertain input parameters. To address these issues, we propose an efficient two-stage MC approach for small failure probability analysis in high-dimensional groundwater contaminant transport modeling. In the first stage, a low-dimensional representation of the original high-dimensional model is sought with Karhunen–Loève expansion and sliced inverse regression jointly, which allows for the easy construction of a surrogate with polynomial chaos expansion. Then a surrogate-based MC simulation is implemented. In the second stage, the small number of samples that are close to the failure boundary are re-evaluated with the original model, which corrects the bias introduced by the surrogate approximation. The proposed approach is tested with a numerical case study and is shown to be 100 times faster than the traditional MC approach in achieving the same level of estimation accuracy.

54 ENVIRONMENTAL SCIENCES↗

A Three‐Dimensional Porous Organic Semiconductor Based on Fully sp 2 ‐Hybridized Graphitic Polymer

Abstract Dimensionality plays an important role in the charge transport properties of organic semiconductors. Although three‐dimensional semiconductors, such as Si, are common in inorganic materials, imparting electrical conductivity to covalent three‐dimensional organic polymers is challenging. Now, the synthesis of a three‐dimensional π‐conjugated porous organic polymer (3D p‐POP) using catalyst‐free Diels–Alder cycloaddition polymerization followed by acid‐promoted aromatization is presented. With a surface area of 801 m 2 g −1 , full conjugation throughout the carbon backbone, and an electrical conductivity of 6(2)×10 −4 S cm −1 upon treatment with I 2 vapor, the 3D p‐POP is the first member of a new class of permanently porous 3D organic semiconductors.

Byun, Yearin↗

Five-dimensional spinor helicity for all masses and spins

We develop a spinor helicity formalism for five-dimensional scattering amplitudes of any mass and spin configuration. While five-dimensional spinor helicity variables have been previously studied in the context of $\mathcal{N}$ = 2, 4 supersymmetric Yang-Mills scattering amplitudes with spin less than two [1], we propose an alternative viewpoint that stems from d-dimensional spinor helicity variables avoiding the decomposition of a massive momentum into the sum of two massless momenta. By enumerating all possible independent little group tensors, we systematically build the full space of five-dimensional three-point tree-level scattering amplitudes for any configuration of spins and masses. Furthermore, we provide a prescription for computing the high energy limit of scattering amplitudes written in our spinor helicity variables. We also expect that our formalism will be applicable to effective field theories with higher spin, in particular, the scattering of highly spinning black holes in five dimensions.

Field Theories in Higher Dimensions↗

Electronic Structures of Newly Discovered Quasi-One-Dimensional Superconductors A{sub 2}Mo{sub 3}As{sub 3} (A=K,Rb,Cs)

Electronic structures of the newly discovered quasi-one-dimensional superconductors A{sub 2}Mo{sub 3}As{sub 3} (A=K, Rb and Cs) are studied through first-principles calculations. We find that the bond lengths within the [Mo{sub 6}As{sub 6}]{sup 4−} chains are robust against the replacement of alkali cations, leading to quite similar electronic structures among the three members. Three bands cross the Fermi level and form two quasi-one-dimensional Fermi surfaces as well as one three dimensional component. The obtained density of states near the Fermi level show great Mo-4d orbitals character, in particular the d{sub z{sup 2}}, d{sub xy} and d{sub x{sup 2}−y{sup 2}} orbitals. Our calculations show that A{sub 2}Mo{sub 3}As{sub 3} share great similarity in electron properties with extensively studied A{sub 2}Cr{sub 3}As{sub 3}, indicating that A{sub 2}Mo{sub 3}As{sub 3} are probably another family of unconventional quasi-one-dimensional superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simulation of Thermal Stratification in BWR Suppression Pools with One Dimensional Modeling Method

The suppression pool in a boiling water reactor (BWR) plant not only is the major heat sink within the containment system, but also provides the major emergency cooling water for the reactor core. In several accident scenarios, such as a loss-of-coolant accident and extended station blackout, thermal stratification tends to form in the pool after the initial rapid venting stage. Accurately predicting the pool stratification phenomenon is important because it affects the peak containment pressure; the pool temperature distribution also affects the NPSHa (available net positive suction head) and therefore the performance of the Emergency Core Cooling System and Reactor Core Isolation Cooling System pumps that draw cooling water back to the core. Current safety analysis codes use zero dimensional (0-D) lumped parameter models to calculate the energy and mass balance in the pool; therefore, they have large uncertainties in the prediction of scenarios in which stratification and mixing are important. While three-dimensional (3-D) computational fluid dynamics (CFD) methods can be used to analyze realistic 3-D configurations, these methods normally require very fine grid resolution to resolve thin substructures such as jets and wall boundaries, resulting in a long simulation time. For mixing in stably stratified large enclosures, the BMIX++ code (Berkeley mechanistic MIXing code in C++) has been developed to implement a highly efficient analysis method for stratification where the ambient fluid volume is represented by one-dimensional (1-D) transient partial differential equations and substructures (such as free or wall jets) are modeled with 1-D integral models. This allows very large reductions in computational effort compared to multi-dimensional CFD modeling. One heat-up experiment performed at the Finland POOLEX facility, which was designed to study phenomena relevant to Nordic design BWR suppression pool including thermal stratification and mixing, is used for validation. Comparisons between the BMIX++, GOTHIC, and CFD calculations against the POOLEX experimental data are discussed in detail.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Tomograms for open quantum systems: In(finite) dimensional optical and spin systems

Tomograms are obtained as probability distributions and are used to reconstruct a quantum state from experimentally measured values. We study the evolution of tomograms for different quantum systems, both finite and infinite dimensional. In realistic experimental conditions, quantum states are exposed to the ambient environment and hence subject to effects like decoherence and dissipation, which are dealt with here, consistently, using the formalism of open quantum systems. This is extremely relevant from the perspective of experimental implementation and issues related to state reconstruction in quantum computation and communication. These considerations are also expected to affect the quasiprobability distribution obtained from experimentally generated tomograms and nonclassicality observed from them. -- Highlights: •Tomograms are constructed for open quantum systems. •Finite and infinite dimensional quantum systems are studied. •Finite dimensional systems (phase states, single & two qubit spin states) are studied. •A dissipative harmonic oscillator is considered as an infinite dimensional system. •Both pure dephasing as well as dissipation effects are studied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radiation damage of a two-dimensional carbon fiber composite (CFC)

Carbon fiber composites (CFC) are, among other applications, already in use as low-impedance collimating elements for intercepting TeV-level protons machines, like the CERN Large Hadron Collider. Towards a comprehensive understanding of these materials’ properties and behavior, a series of radiation damage campaigns have been undertaken in order to quantitively investigate the response of AC-150 K CFC to high proton fluences. The CFCs dimensional changes, stability, micro-structural evolution, and structural integrity below and above 5 × 10 20 p/cm 2 fluence threshold were studied. The irradiating particles were protons of kinetic energies in the range of 130–200 MeV. The effects of the irradiation temperature (~90–180°C and 280–500°C) combined with the proton fluence on the dimensional stability and the microstructural evolution of this anisotropic two-dimensional composite structure were studied using precision dilatometry and X-ray diffraction. Our results shed light on the fluence-based limitations for these composite materials. Furthermore, we compare these results with reference unirradiated graphite, and we discuss the similarities and differences in the dimensional changes and post-irradiation annealing properties.

36 MATERIALS SCIENCE↗

Data-driven projection pursuit adaptation of polynomial chaos expansions for dependent high-dimensional parameters

Uncertainty quantification (UQ) and inference involving a large number of parameters are valuable tools for problems associated with heterogeneous and non-stationary behaviors. The difficulty with these problems is exacerbated when these parameters are statistically dependent requiring statistical characterization over joint measures. Probabilistic modeling methodologies stand as effective tools in the realms of UQ and inference. Among these, polynomial chaos expansions (PCE), when adapted to low-dimensional quantities of interest (QoI), provide effective yet accurate approximations for these QoI in terms of an adapted orthogonal basis. These adaptation techniques have been cast as projection pursuits in Gaussian Hilbert space in what has been referred to as a projection pursuit adaptation (PPA) by Xiaoshu Zeng and Roger Ghanem (2023). The PPA method efficiently identifies an optimal low-dimensional space for representing the QoI and simultaneously evaluates an optimal PCE within that space. The quality of this approximation clearly depends on the size of the training dataset, which is typically a function of the adapted reduced dimension. Here, the complexity of the problem is thus mediated by the complexity of the low-dimensional quantity of interest and not the complexity of the high-dimensional parameter space.

Data-driven↗

Incorporating two-dimensional conduction modeling techniques into an energy simulation program: The EnergyPlus radiant system example

Due to the inherent complexity of multi-dimensional solutions for transient conduction in a multilayered building element, most heat balance-based algorithms assume that conduction occurs only in one dimension—through the building element between the inside and outside environments. Usually, since the length and width of the elements are much greater than the thickness of the element, this is a valid assumption. However, there are some cases such as hydronic radiant slabs where this assumption may not lead to an accurate estimate of the energy consumption of the system. In a hydronic radiant slab, water tubes are embedded in a slab, and hot or chilled water is circulated to meet any heating or cooling loads. The energy consumption of such a system will depend highly on the temperature of the water being sent to the slab (i.e., produced by the boiler or chiller). The temperature of the water that must be sent to the slab will depend on the spacing of the tubes, the multilayer construction of the building element, and the boundary conditions to which the construction is exposed. Thus, to accurately predict the energy consumption of such a system, a transient two-dimensional heat conduction model must be integrated with a heat balance-based simulation. This paper demonstrates the potential loss of accuracy associated with the one-dimensional radiant system models by providing a comparison of one- and two-dimensional solutions using EnergyPlus.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗