Search NASA⌕ Search

SEARCH · Search NASA

Results for “docking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Liquid impact on tank bulkheads

Propellant impact loading on tank bulkheads induced by maneuvering or docking of spacecraft in low gravity environment, and thrust termination in atmosphere

DOCKING↗

Cubesat Proximity Operations Demonstration (CPOD)

The CubeSat Proximity Operations Demonstration (CPOD) project will demonstrate rendezvous, proximity operations and docking (RPOD) using two 3-unit (3U) CubeSats. Each CubeSat is a satellite with the dimensions 4 inches x 4 inches x 13 inches (10 centimeters x 10 centimeters x 33 centimeters) and weighing approximately 11 pounds (5 kilograms). This flight demonstration will validate and characterize many new miniature low-power proximity operations technologies applicable to future missions. This mission will advance the state of the art in nanosatellite attitude determination,navigation and control systems, in addition to demonstrating relative navigation capabilities.The two CPOD satellites are scheduled to be launched together to low-Earth orbit no earlier than Dec. 1, 2015.

Relative navigation capabilities↗

Autonomous RPOD for Arbitrarily Configured Spacecraft with Anomaly Detection

Autonomous GN&C is a necessary component for a sustainable deep-space logistics architecture. The challenges for establishing robust autonomy are numerous, from state uncertainty, to anomaly detection and recovery. In this work, previous work investigating autonomous GN&C for arbitrary thruster configurations and mass properties is expanded to include state uncertainty and anomaly detection. Logistics vehicles with off-center-of-mass thruster configurations and in the presence of large but realistic state uncertainties are simulated in a Rendezvous, Proximity Operations and Docking scenario. Furthermore, stuck and non-functional thrusters are simulated, demonstrating the vehicle's ability to identify and overcome thruster anomalies. The simulations demonstrate that even with these realistic ambiguities, the vehicle is able to converge to the desired pose.

GN&C↗

Nematic Colloidal Micro‐Robots as Physically Intelligent Systems

Abstract Physically intelligent micro‐robotic systems exploit information embedded in micro‐robots, their colloidal cargo, and their milieu to interact, assemble, and form functional structures. Nonlinear anisotropic fluids such as nematic liquid crystals (NLCs) provide untapped opportunities to embed interactions via their topological defects, complex elastic responses, and ability to dramatically restructure in dynamic settings. Here a four‐armed ferromagnetic micro‐robot is designed and fabricated to embed and dynamically reconfigure information in the nematic director field, generating a suite of physical interactions for cargo manipulation. The micro‐robot shape and surface chemistry are designed to generate a nemato‐elastic energy landscape in the domain that defines multiple modes of emergent, bottom‐up interactions with passive colloids. Micro‐robot rotation expands the ability to sculpt interactions; the energy landscape around a rotating micro‐robot is dynamically reconfigured by complex far‐from‐equilibrium dynamics of the micro‐robot's companion topological defect. These defect dynamics allow transient information to be programmed into the domain and exploited. Robust micro‐robotic manipulation strategies are demonstrated that exploit these diverse modes of nemato‐elastic interaction to achieve cargo docking, transport, release, and assembly of complex reconfigurable structures at multi‐stable sites. Such structures are of great interest to future developments of LC‐based advanced optical device and micro‐manufacturing in anisotropic environments.

Yao, Tianyi↗

Band Bending Engineering at Organic/Inorganic Interfaces Using Organic Self‐Assembled Monolayers

Adsorbing strong electron donors or acceptors on semiconducting surfaces induces band bending, whose extent and magnitude are strongly dependent on the doping concentration of the semiconductor. This study applies hybrid density‐functional theory calculations together with the recently developed charge reservoir electrostatic sheet technique to account for charge transfer from the bulk of the semiconductor to the interface. This study further investigates the impact of surface‐functionalization with specifically tailored self‐assembled monolayers (SAMs). For the example of three chemically‐similar SAMs, that all bond to the ZnO surface via pyridine docking groups, it is shown that the SAMs introduce shallow or deep donor levels that pin the band bending at the position of the SAM's highest occupied molecular orbital. In this way, the magnitude of the induced band bending can be controlled by the type of SAM, to a point where the doping‐concentration dependence is completely eliminated.

Hofmann, Oliver T.↗

Carbonic Anhydrase Variants Catalyze the Reduction of Dialkyl Ketones with High Enantioselectivity

Abstract Human carbonic anhydrase II (hCAII) naturally catalyzes the reaction between two achiral molecules—water and carbon dioxide—to yield the achiral product carbonic acid through a zinc hydroxide intermediate. We have previously shown that a zinc hydride, instead of a hydroxide, can be generated in this enzyme to create a catalyst for the reduction of aryl ketones. Dialkyl ketones are more challenging to reduce, and the enantioselective reduction of dialkyl ketones with two alkyl groups that are similar in size and electronic properties, is a particularly challenging transformation to achieve with high activity and selectivity. Here, we show that hCAII, as well as a double mutant of it, catalyzes the enantioselective reduction of dialkyl ketones with high yields and enantioselectivities, even when the two alkyl groups are similar in size. We also show that variants of hCAII catalyze the site‐selective reduction of one ketone over the other in an unsymmetrical aliphatic diketone. Computational docking of a dialkyl ketone to variants of hCAII containing the zinc hydride provides insights into the origins of the reactivity of various substrates and the high enantioselectivity of the transformations and show how a confined environment can control the enantioselectivity of an abiological intermediate.

Chen, Reichi↗

Identification and analysis of sugar transporters capable of co–transporting glucose and xylose simultaneously

Simultaneous co-fermentation of glucose and xylose is a key desired trait of engineered Saccharomyces cerevisiae for efficient and rapid production of biofuels and chemicals. However, glucose strongly inhibits xylose transport by endogenous hexose transporters of S. cerevisiae. We identified structurally distant sugar transporters (Lipomyces starkeyi LST1_205437 and Arabidopsis thaliana AtSWEET7) capable of co-transporting glucose and xylose from previously unexplored oleaginous yeasts and plants. Kinetic analysis showed that LST1_205437 had lenient glucose inhibition on xylose transport and AtSWEET7 transported glucose and xylose simultaneously with no inhibition. Modelling studies of LST1_205437 revealed that Ala335 residue at sugar binding site can accommodates both glucose and xylose. Docking studies with AtSWEET7 revealed that Trp59, Trp183, Asn145, and Asn179 residues stabilized the interactions with sugars, allowing both xylose and glucose to be co-transported. In addition, we altered sugar preference of LST1_205437 by single amino acid mutation at Asn365. Furthermore, our findings provide a new mechanistic insight on glucose and xylose transport mechanism of sugar transporters and the identified sugar transporters can be employed to develop engineered yeast strains for producing cellulosic biofuels and chemicals.

59 BASIC BIOLOGICAL SCIENCES↗

Structural and functional features of lysine acetylation of plant and animal tubulins

Abstract The study of the genome and the proteome of different species and representatives of distinct kingdoms, especially detection of proteome via wide‐scaled analyses has various challenges and pitfalls. Attempts to combine all available information together and isolate some common features for determination of the pathway and their mechanism of action generally have a highly complicated nature. However, microtubule (MT) monomers are highly conserved protein structures, and microtubules are structurally conserved from Homo sapiens to Arabidopsis thaliana . The interaction of MT elements with microtubule‐associated proteins and post‐translational modifiers is fully dependent on protein interfaces, and almost all MT modifications are well described except acetylation. Crystallography and interactome data using different approaches were combined to identify conserved proteins important in acetylation of microtubules. Application of computational methods and comparative analysis of binding modes generated a robust predictive model of acetylation of the ϵ‐amino group of Lys40 in α‐tubulins. In turn, the model discarded some probable mechanisms of interaction between elements of interest. Reconstruction of unresolved protein structures was carried out with modeling by homology to the existing crystal structure (PDBID: 1Z2B) from B. taurus using Swiss‐model server, followed by a molecular dynamics simulation. Docking of the human tubulin fragment with Lys40 into the active site of α‐tubulin acetyltransferase, reproduces the binding mode of peptidomimetic from X‐ray structure (PDBID: 4PK3).

Rayevsky, Alexey V.↗

Structure- and Interaction-Based Design of Anti-SARS-CoV-2 Aptamers

Aptamer selection against novel infections is a complicated and time-consuming approach. Synergy can be achieved by using computational methods together with experimental procedures. In this study, we aim to develop a reliable methodology for a rational aptamer in silico et vitro design. The new approach combines multiple steps: (1) Molecular design, based on screening in a DNA aptamer library and directed mutagenesis to fit the protein tertiary structure; (2) 3D molecular modeling of the target; (3) Molecular docking of an aptamer with the protein; (4) Molecular dynamics (MD) simulations of the complexes; (5) Quantum-mechanical (QM) evaluation of the interactions between aptamer and target with further analysis; (6) Experimental verification at each cycle for structure and binding affinity by using small-angle X-ray scattering, cytometry, and fluorescence polarization. By using a new iterative design procedure, structure- and interaction-based drug design (SIBDD), a highly specific aptamer to the receptor-binding domain of the SARS-CoV-2 spike protein, was developed and validated. The SIBDD approach enhances speed of the high-affinity aptamers development from scratch, using a target protein structure. The method could be used to improve existing aptamers for stronger binding. This approach brings to an advanced level the development of novel affinity probes, functional nucleic acids. It offers a blueprint for the straightforward design of targeting molecules for new pathogen agents and emerging variants.

60 APPLIED LIFE SCIENCES↗

Artificial hydrogenases based on cobaloximes and heme oxygenase

The insertion of cobaloxime catalysts in the heme-binding pocket of heme oxygenase (HO) yields artificial hydrogenases active for H 2 evolution in neutral aqueous solutions. These novel biohybrids have been purified and characterized by using UV/visible and EPR spectroscopy. These analyses revealed the presence of two distinct binding conformations, thereby providing the cobaloxime with hydrophobic and hydrophilic environments, respectively. Quantum chemical/molecular mechanical docking calculations found open and closed conformations of the binding pocket owing to mobile amino acid residues. HO-based biohybrids incorporating a {Co(dmgH) 2 } (dmgH 2 = dimethylglyoxime) catalytic center displayed up to threefold increased turnover numbers with respect to the cobaloxime alone or to analogous sperm whale myoglobin adducts. Here, this study thus provides a strong basis for further improvement of such biohybrids, using well-designed modifications of the second and outer coordination spheres, through site-directed mutagenesis of the host protein.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Antihypertensive effect of quinoa protein under simulated gastrointestinal digestion and peptide characterization

Abstract BACKGROUND Quinoa protein is a potential source of bioactive peptides. Although some studies have demonstrated its angiotensin converting enzyme (ACE) inhibitory properties, research into its in vivo effect on blood‐pressure regulation and peptide characterization remains limited. RESULTS Quinoa protein hydrolyzate (QPH) was prepared by simulated gastrointestinal digestion. QPH lowered the systolic blood pressure (SBP) and diastolic blood pressure (DBP) in spontaneously hypertensive model rats (SHRs) from 2 h to10 h after oral administration, effectively controlling blood pressure in these SHRs. An in vitro study showed that QPH is capable of inhibiting ACE activity. This was attributed to the activity of a number of low‐molecular‐weight peptides. With relatively high scores predicted by PeptideRanker, three promising bioactive peptides, FHPFPR, NWFPLPR, and NIFRPF, were further studied and their ACE‐inhibition effects were confirmed with IC 50 values of 34.92, 16.77, and 32.40 μM, respectively. A molecular docking study provided insights into the binding of ACE with peptides, and revealed that the presence of specific amino acids in the peptide sequence (Pro, Phe, and Arg at the C‐terminal, and Asn at the N‐terminal) could contribute to the interaction between ACE and peptides. CONCLUSION These results demonstrated the potential of QPH for the management of hypertension, which indicates that it could be a good candidate for inclusion in functional foods to control high blood pressure. © 2020 Society of Chemical Industry

Guo, Huimin↗

Insights revealed by the co-crystal structure of the Saccharomyces cerevisiae histidine phosphotransfer protein Ypd1 and the receiver domain of its downstream response regulator Ssk1

Two-component signaling systems are the primary means by which bacteria, archaea, and certain plants and fungi react to their environments. The model yeast, Saccharomyces cerevisiae, uses the Sln1 signaling pathway to respond to hyperosmotic stress. This pathway contains a hybrid histidine kinase (Sln1) that autophosphorylates and transfers a phosphoryl group to its own receiver domain (R1). The phosphoryl group is then transferred to a histidine phosphotransfer protein (Ypd1) that finally passes it to the receiver domain (R2) of a downstream response regulator (Ssk1). Under normal conditions, Ssk1 is constitutively and preferentially phosphorylated in the phosphorelay. Upon detecting hyperosmotic stress, Ssk1 rapidly dephosphorylates and activates the high-osmolarity glycerol (HOG) pathway, initiating a response. Despite their distinct physiological roles, both Sln1 and Ssk1 bind to Ypd1 at a common docking site. Co-crystal structures of response regulators in complex with their phosphorelay partners are scarce, leaving many mechanistic and structural details uncharacterized for systems like the Sln1 pathway. In this work, we present the co-crystal structure of Ypd1 and a near wild-type variant of the receiver domain of Ssk1 (Ssk1-R2-W638A) at a resolution of 2.80 Å. Our structural analyses of Ypd1-receiver domain complexes, biochemical determination of binding affinities for Ssk1-R2 variants, in silico free energy estimates, and sequence comparisons reveal distinctive electrostatic properties of the Ypd1/ Ssk1-R2-W638A complex that may provide insight into the regulation of the Sln1 pathway as a function of dynamic osmolyte concentration.

59 BASIC BIOLOGICAL SCIENCES↗

Specificity determinants revealed by the structure of glycosyltransferase Campylobacter concisus PglA

Abstract In selected Campylobacter species, the biosynthesis of N‐linked glycoconjugates via the pgl pathway is essential for pathogenicity and survival. However, most of the membrane‐associated GT‐B fold glycosyltransferases responsible for diversifying glycans in this pathway have not been structurally characterized which hinders the understanding of the structural factors that govern substrate specificity and prediction of resulting glycan composition. Herein, we report the 1.8 Å resolution structure of Campylobacter concisus PglA, the glycosyltransferase responsible for the transfer of N ‐acetylgalatosamine (GalNAc) from uridine 5′‐diphospho‐ N ‐acetylgalactosamine (UDP‐GalNAc) to undecaprenyl‐diphospho‐ N , N ′‐diacetylbacillosamine (UndPP‐diNAcBac) in complex with the sugar donor GalNAc. This study identifies distinguishing characteristics that set PglA apart within the GT4 enzyme family. Computational docking of the structure in the membrane in comparison to homologs points to differences in interactions with the membrane‐embedded acceptor and the structural analysis of the complex together with bioinformatics and site‐directed mutagenesis identifies donor sugar binding motifs. Notably, E113, conserved solely among PglA enzymes, forms a hydrogen bond with the GalNAc C6″‐OH. Mutagenesis of E113 reveals activity consistent with this role in substrate binding, rather than stabilization of the oxocarbenium ion transition state, a function sometimes ascribed to the corresponding residue in GT4 homologs. The bioinformatic analyses reveal a substrate‐specificity motif, showing that Pro281 in a substrate binding loop of PglA directs configurational preference for GalNAc over GlcNAc. This proline is replaced by a conformationally flexible glycine, even in distant homologs, which favor substrates with the same stereochemistry at C4, such as glucose. The signature loop is conserved across all Campylobacter PglA enzymes, emphasizing its importance in substrate specificity.

Vuksanovic, Nemanja↗

The structural basis for the broad aldehyde specificity of the aminoaldehyde dehydrogenase PauC from the human pathogen Pseudomonas aeruginosa

Abstract Despite significant differences in size and formal charge, the aldehyde dehydrogenasePaPauC (PA5312) fromPseudomonas aeruginosaPAO1 efficiently catalyzes the NAD + ‐dependent oxidation of the aminoaldehydes formed in polyamines degradation. We report here thatPaPauC also oxidizes 4‐guanidinebutyraldehyde, formed in one arginine degradation pathway, trimethylaminobutyraldehyde, of unknown metabolic origin, and indole‐3‐acetaldehyde, a precursor of the plant growth‐promoting hormone indoleacetic acid.PaPauC has been proposed as a potential target for combatingP. aeruginosa. However, understanding its structure–function relationships, crucial for developing specific inhibitors, is lacking. Using X‐ray crystallography, we identified the structural characteristics that determinePaPauC broad aldehyde specificity: a spacious aldehyde‐entrance tunnel and six active‐site residues. Docking simulations, site‐directed mutagenesis, and kinetic analyses support the interactions of Lys479 with glutamylated aminoaldehydes; Phe169, Trp176, and Phe467 with amino and guanidinium groups through cation–π interactions and with the indole group via NH–π and CH–π interactions; Asp459 with amino and indole groups; and Thr303 with amide and guanidinium groups. Exploiting the distinctive structural features of thePaPauC active site could aid in developing specific inhibitors to combatP. aeruginosainfections in humans and animals, as well as in preventing its colonization of plants, which are abundantP. aeruginosareservoirs and, therefore, a significant source of human infections.

Biochemistry & Molecular Biology↗