Search NASA⌕ Search

SEARCH · Search NASA

Results for “doping effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Nitrogen-Coordinated Single Cobalt Atom Catalysts for Oxygen Reduction in Proton Exchange Membrane Fuel Cells

Due to the Fenton reaction, the presence of Fe and peroxide in electrodes generates free radicals causing serious degradation of the organic ionomer and the membrane. Pt-free and Fe-free cathode catalysts therefore are urgently needed for durable and inexpensive proton exchange membrane fuel cells (PEMFCs). Herein, a high-performance nitrogen-coordinated single Co atom catalyst is derived from Co-doped metal-organic frameworks (MOFs) through a one-step thermal activation. Aberration-corrected electron micros-copy combined with X-ray absorption spectroscopy virtually verifies the CoN4 coordination at an atomic level in the catalysts. Through investigating effects of Co doping contents and thermal activation temperature, an atomically Co site dispersed catalyst with optimal chemical and structural properties has achieved respectable activity and stability for the oxygen reduction reaction (ORR) in challenging acidic media (e.g., half-wave potential of 0.80 V vs reversible hydrogen electrode (RHE). The performance is comparable to Fe-based catalysts and 60 mV lower than Pt/C -60 µg Pt cm-2). Fuel cell tests confirm that catalyst activity and stability can translate to high-performance cathodes in PEMFCs. The remarkably enhanced ORR performance is attrib-uted to the presence of well-dispersed CoN4 active sites embedded in 3D porous MOF-derived carbon particles, omitting any inactive Co aggregates.

Wang, Xiao X.↗

Gamma and x-ray irradiation effects on different Ge and Ge/F doped optical fibers

We performed electron paramagnetic resonance (EPR) measurements on γ and X ray irradiated Ge doped and Ge/F co-doped optical fibers. We considered three different drawing conditions (speed and tension), and for each type of drawing, we studied Ge and Ge/F doped samples having Ge doping level above 4% by weight. The EPR data recorded for the γ ray irradiated fibers confirm that all the samples exhibit a very close radiation response regardless of the drawing conditions corresponding to values used for the production of specialty fibers. Furthermore, as for the X irradiated materials, in the γ ray irradiated F co-doped fibers, we observed that the Ge(1) and the Ge(2) defects generation is unchanged, whereas it was enhanced for the E'Ge. In the various fibers, the comparison of the γ and X-ray induced concentrations of these kinds of Ge related defects indicates that the two irradiations induce similar effects regardless of the different employed dose rates and sources. Confocal microscopy luminescence results show that the starting content of the Germanium Lone Pair Center (GLPC) is neither strongly affected by the Ge content nor by the drawing conditions, and we consider the similarity of the GLPC content as key factor in determining many of the above reported similarities.

36 MATERIALS SCIENCE↗

Effect of Zn, Ga and Gd Doping on Structural and Magnetic Properties of Nanonickel Ferrite Prepared by Two Different Methods

Zn/Ga/Gd-substituted NiFe{sub 2}O{sub 4} was formed by solid state reaction and citrate methods. The influence of substitutions on phase formation, the strain, crystallize size, cations distribution and magnetic properties have been examined by X-ray diffraction, Mössbauer effect spectrometer, Fourier-transform infrared, and vibrating sample magnetometer. Zn/Ga/Gd substituted NiFe{sub 2}O{sub 4} samples prepared by solid state method showed that as gadolinium introduced into the system, a second phase was formed with a small percentage while samples prepared by citrate method exhibited a single phase. The distributions of different cations between different sites were determined by both Mössbauer effect spectroscopy, modified Bertaut and Rietveld analysis. Mössbauer technique at room temperature showed that samples synthesized by the ceramic method have a magnetic order while samples prepared by citrate method have a superparamagnetic nature. The canting angle between magnetic ions was increased by increased the amount of Zn in samples prepared by both methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Divergent effects of static disorder and hole doping in geometrically frustrated {beta}-CaCr{sub 2}O{sub 4}

The gallium substituted and calcium deficient variants of geometrically frustrated {beta}-CaCr{sub 2}O{sub 4}, {beta}-CaCr{sub 2-2x}Ga{sub 2x}O{sub 4} (0.02{<=}x{<=}0.25) and {beta}-Ca{sub 1-y}Cr{sub 2}O{sub 4} (0.075{<=}y{<=}0.15), have been investigated by X-ray powder diffraction, magnetization and specific heat measurements. This allows for a direct comparison of the effects, in a geometrically frustrated magnet, of the static disorder that arises from non-magnetic substitution and the dynamic disorder that arises from hole doping. In both cases, disturbing the Cr{sup 3+} lattice results in a reduction in the degree of magnetic frustration. On substitution of Ga, which introduces disorder without creating holes, a gradual release of spins from ordered antiferromagnetic states is observed. In contrast, in the calcium-deficient compounds the introduction of holes induces static ferrimagnetic ordering and much stronger perturbations of the {beta}-CaCr{sub 2}O{sub 4} host. - Graphical abstract: Scaled plot of the temperature dependence of the inverse susceptibility for {beta}-CaCr{sub 2-2x}Ga{sub 2x}O{sub 4} (closed symbols) and {beta}-Ca{sub 1-y}Cr{sub 2}O{sub 4} (open symbols). Data sets depicted in the same color contain equivalent amounts of Cr{sup 3+}.

36 MATERIALS SCIENCE↗

Compensation for effects of ambient temperature on rare-earth doped fiber optic thermometer

Variations in ambient temperature have a negative effect on the performance of any fiber optic sensing system. A change in ambient temperature may alter the design parameters of fiber optic cables, connectors, sources, detectors, and other fiber optic components and eventually the performance of the entire system. The thermal stability of components is especially important in a system which employs intensity modulated sensors. Several referencing schemes have been developed to account for the variable losses that occur within the system. However, none of these conventional compensating techniques can be used to stabilize the thermal drift of the light source in a system based on the spectral properties of the sensor material. The compensation for changes in ambient temperature becomes especially important in fiber optic thermometers doped with rare earths. Different approaches to solving this problem are searched and analyzed.

Adamovsky, G.↗

Compensation for effects of ambient temperature on rare-earth doped fiber optic thermometer

Variations in ambient temperature have a negative effect on the performance of any fiber optic sensing system. A change in ambient temperature may alter the design parameters of fiber optic cables, connectors, sources, detectors, and other fiber optic components and eventually the performance of the entire system. The thermal stability of components is especially important in a system which employs intensity modulated sensors. Several referencing schemes have been developed to account for the variable losses that occur within the system. However, none of these conventional compensating techniques can be used to stabilize the thermal drift of the light source in a system based on the spectral properties of the sensor material. The compensation for changes in ambient temperature becomes especially important in fiber optic thermometers doped with rare earths. Different approaches to solving this problem are searched and analyzed.

Adamovsky, G.↗

Role of Gd{sup 3+} ion on downshifting and upconversion emission properties of Pr{sup 3+}, Yb{sup 3+} co-doped YNbO{sub 4} phosphor and sensitization effect of Bi{sup 3+} ion

Dual-mode luminescence (downshifting-DS and upconversion-UC) properties of Pr{sup 3+}/Yb{sup 3+} co-doped Y{sub 1−x}Gd{sub x}NbO{sub 4} (x = 0.0, 0.5, and 1.0) phosphors synthesized by solid state reaction technique have been explored with and without Gd{sup 3+} ion. The structural characterizations (XRD, SEM, and FTIR) confirm the pure phase of YNbO{sub 4} phosphor. Further, with the Gd{sup 3+} ion co-doping, the YNbO{sub 4} phosphors having a random shape and the large particle size are found to be transformed into nearly spherical shape particles with the reduced particle size. The optical band gaps (E{sub g}) of Y{sub 1−x}Gd{sub x}NbO{sub 4} (x = 0.00, 0.25, 0.50, and 1.00) calculated from UV-Vis-NIR measurements are ∼3.69, 4.00, 4.38, and 4.44 eV, respectively. Moreover, YNbO{sub 4} phosphor is a promising blue emitting material, whereas Y{sub 1−x−y−z}Pr{sub y}Yb{sub z}Gd{sub x}NbO{sub 4} phosphor gives intense green, blue, and red emissions via dual-mode optical processes. The broad blue emission arises due to (NbO{sub 4}){sup 3−} group of the host with λ{sub ex} = 264 nm, whereas Pr{sup 3+} doped YNbO{sub 4} phosphor gives dominant red and blue emissions along with comparatively weak green emission on excitation with λ{sub ex} = 300 nm and 491 nm. The concentration dependent variation in emission intensity at 491 nm ({sup 3}P{sub 0}→{sup 3}H{sub 4} transition) and 612 nm ({sup 1}D{sub 2}→{sup 3}H{sub 4} transition); at 612 nm ({sup 1}D{sub 2}→{sup 3}H{sub 4} transition) and 658 nm ({sup 3}P{sub 0}→{sup 3}F{sub 2} transition) of Pr{sup 3+} ion in YNbO{sub 4} phosphor with λ{sub ex} = 300 nm and 491 nm excitations, respectively, has been thoroughly explored and explained by the cross-relaxation process through different channels. The sensitization effect of Bi{sup 3+} ion co-doping on DS properties of the phosphor has also been studied. The observed DS results have been optimized by varying the concentration of Pr{sup 3+} and Bi{sup 3+} ions, and the results are explained by the well-known simple band structure model. The study of Gd{sup 3+} co-doping reveals noticeable differences in DS characteristics of Y{sub 1−x}Pr{sub x}NbO{sub 4} phosphors: the overall decrement and increment (except for 612 nm emission) in intensity of DS emission on excitation with λ{sub ex} = 264 nm and 491 nm, respectively. These observations have been thoroughly explained, and the {sup 1}D{sub 2}→{sup 3}H{sub 4} transition (612 nm) of Pr{sup 3+} ion is found to be strongly dependent on surrounding environment of the host matrix. The UC properties of Y{sub 0.95−x}Pr{sub x}Yb{sub 0.05}NbO{sub 4} phosphors have been explored using Near Infra-Red (NIR) excitation. The material gives intense green and relatively weak blue and red UC emissions with λ{sub ex} = 980 nm. Interestingly, the UC emission intensity is further enhanced in the case of Y{sub 0.949−x}Pr{sub 0.001}Yb{sub 0.05}Gd{sub x}NbO{sub 4} phosphors. In addition, the less explored laser induced heating effect with the pump power as well as the irradiation time on the UC emission has been explored in Y{sub 0.949−x}Pr{sub 0.001}Yb{sub 0.05}Gd{sub x}NbO{sub 4} (x = 0, 0.5, and 0.949) phosphor samples, and subsequently, this feature has been found to be superior for Gd{sub 0.949}Pr{sub 0.001}Yb{sub 0.05}NbO{sub 4} phosphor. The comparative study between the two hosts, viz., YNbO{sub 4} and GdNbO{sub 4} shows that GdNbO{sub 4} is better than YNbO{sub 4} for UC emission behavior; however, a reverse is observed as for as DS behavior is concerned only for the particular excitation wavelength (λ{sub ex} = 264 nm).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

MATERIALS DEGRADATION ANALYSIS AND DEVELOPMENT TO ENABLE ULTRA LOW COST, WEB-PROCESSED WHITE P-OLED FOR SSL

Progress over Phase II of DE-FG02-07ER86293 'Materials Degradation Analysis and Development to Enable Ultra Low Cost, Web-Processed White P-OLED for SSL' was initially rapid in terms of device performance improvements. We exceeded our device luminance lifetime goals for printed flexible white OLEDs as laid out in our project proposal. Our Phase II performance target was to demonstrate >1500 hours luminance lifetime at 100 Cd/m2 from a printed flexible device. We now have R&D devices well in excess of 8000 hrs lifetime at 100 Cd/m2, tested in air. We also were able to produce devices which met the voltage target of >1500 hours below 15V operation. After completing the initial performance milestones, we went on to focus on color-related degradation issues which were cited as important to commercialization of the technology by our manufacturing partners. We also put additional focus on cathode work as the active material development that occurred over the STTR time period required an adaptation of the cathode from the original cathode formulations which were developed based on previous generation active layer materials. We were able to improve compatibility of the cathode with some of the newer generation active layer materials and improve device yield and voltage behavior. An additional objective of the initial Phase II was to further develop the underlying manufacturing technology and real-life product specifications. This is a key requirement that must be met to ensure eventual commercialization of this DOE-funded technology. The link between commercial investment for full commercialization and R&D efforts in OLED solid State Lighting is often a large one. Add-Vision's lower cost, printed OLED manufacturing approach is an attraction, but close engagement with manufacturing partners and addressing customer specifications is a very important link. Manufacturing technology encompasses development of moisture reduction encapsulation technology, improved cost performance, and reductions in operating voltage through thinner and higher uniformity active device layers. We have now installed a pilot encapsulation system at AVI for controlled, high throughput lamination encapsulation of flexible OLEDs in a novel process. Along with this, we have developed, with our materials supply partners, adhesives, barrier films and other encapsulation materials and we are showing total air product lifetimes in the 2-4 years range from a process consistent with our throughput goals of {approx}1M device per month ({approx}30,000 sq. ft. of processed OLEDs). Within the last year of the project, we have been working to introduce the manufacturing improvements made in our LEP deposition and annealing process to our commercial partners. Based on the success of this, a pilot scale-up program was begun. During this process, Add-Vision was acquired by a strategic partner, in no small part, because of the promise of future success of the technology as evidenced by our commercial partners pilot scale-up plans. Overall, the performance, manufacturing and product work in this project has been successful. Additional analysis and device work at LBL has also shown a unique adhesion change with device bias stressing which may result from active layer polymer cross-linking during bias stressing of device. It was shown that even small bias stresses, as a fraction of a full device lifetime stress period, result in measurable chemical change in the device. Further work needs to be conducted to fully understand the chemical nature of this interaction. Elucidation of this effect would enable doped OLED formulation to be engineered to suppress this effect and further extend lifetimes and reduce voltage climb.

36 MATERIALS SCIENCE↗

Electronic structure and optical properties of α-(Fe{sub 1-x}V{sub x}){sub 2}O{sub 3} solid-solution thin films

We have examined the effect of V doping on the electronic and optical properties of epitaxial hematite (α-Fe{sub 2}O{sub 3}) thin films, by employing several characterization techniques and computational modeling. The conductivity of α-(Fe{sub 1-x}V{sub x}){sub 2}O{sub 3} (0 ≤ x ≤ ∼0.5) is enhanced by several orders of magnitude as x is increased, as evidenced by electrical resistivity measurements and x-ray photoelectron spectroscopy core-level and valence-band spectra. Optical absorption shows a reduction in the direct band gap by as much as 0.64 eV for x = 0.53 (E{sub g} = 1.46 eV) relative to that of α-Fe{sub 2}O{sub 3} (E{sub g} = 2.10 eV). Detailed understanding of the character of the optical transitions in the alloys is achieved using first-principles calculations of the ground and excited states. These calculations reveal that V doping results in occupied V 3d orbitals hybridized with Fe orbitals and located at approximately mid-gap in α-Fe{sub 2}O{sub 3}. The lowest energy transitions involve charge transfer from occupied V 3d to unoccupied Fe 3d* orbitals. With a low band gap and high conductivity, α-(Fe{sub 1-x}V{sub x}){sub 2}O{sub 3} is a promising material for photovoltaic and photoelectrochemical applications.

36 MATERIALS SCIENCE↗

Synergistic effects of Al, Ga, and In doping on ZnO nanorod arrays grown via citrate-assisted hydrothermal technique for highly efficient and fast scintillator screens

To be used as efficient alpha particle scintillator in the fields of nuclear security, nuclear nonproliferation and high-energy physics, scintillator screens must have high light output and fast decay properties. While there has been a great deal of progress in scintillation efficiency, achieving fast decay time properties are still a challenge. In this work, the near band edge (NBE) UV luminescence and alpha particle induced scintillation properties of vertically aligned densely packed ZnO nanorods (NRs) doped with Al, Ga, and In have been thoroughly investigated. The high crystalline hexagonal wurtzite structure with a strong orientation through the c -axis plane (002) and aspect ratios in the range 13–22 have been observed for all ZnO NRs. Electron paramagnetic resonance (EPR) analysis exhibited paramagnetic signals at g ≈ 1.96 for all ZnO NRs. A cost effective green hydrothermal synthesis technique was employed to grow well-aligned NRs. Using citrate as an additive acting as a strong reducing agent in the solution during the crystal growth, defects on the surface are significantly suppressed, thereby enhancing the NBE UV emission. Significantly higher NBE UV emission was observed from the top surface of ZnO NRs in cathodoluminescence (CL) microscopy. Results show that citrate assisted donor doping of ZnO NRs not only reduces the defect emission and NBE self-absorption, but also induces fast decay time (~ 600–700 ps), which makes ZnO NRs a good candidate for fast alpha particle scintillator screens used in associated particle imaging for time and direction tagging of individual neutrons generated in D–T and D–D neutron generators.

36 MATERIALS SCIENCE↗

First principles study of p-type doping in SiC nanowires: role of quantum effect

Using first principles density functional theory calculations, we investigated the X and X-N-X (X=Al and Ga) doped 3C-SiC nanowires grown along the [111] crystal direction. We found that the ionization energy of acceptor state is much larger in nanowires than that in the bulk SiC as a result of quantum confinement effect. Simulation results show that the reduced dimensionality in p-type SiC nanowires strongly reduces the capability of the materials to generate free carriers. It is also found that X-N-X (X=Al and Ga) complexes are energetically favored to form in the materials and have lower ionization energy than single doping. It is confirm that codoping is more suitable method for achieving low resistivity semiconductors either in nano materials or bulk material.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Synthesis and characterization of F-doped Cs{sub 0.33}WO{sub 3−x}F{sub x} particles with improved near infrared shielding ability

F-doped Cs{sub 0.33}WO{sub 3−x}F{sub x} particles were successfully synthesized by the hydrothermal method with hydrofluoric acid as fluorine source, and a new kind of heat insulating films were prepared from dispersion of Cs{sub 0.33}WO{sub 3−x}F{sub x} nanoparticles in polyvinyl alcohol (PVA) aqueous solution. The effects of F doping on the crystal structure and morphology of Cs{sub 0.33}WO{sub 3−x}F{sub x} particles as well as the near-infrared (NIR) shielding ability and heat insulation properties of Cs{sub 0.33}WO{sub 3−x}F{sub x} films were investigated. The results indicated that HF acid addition could promote the formation of rod-like Cs{sub 0.33}WO{sub 3−x}F{sub x} particles during hydrothermal synthesis and increase the yield of Cs{sub 0.33}WO{sub 3−x}F{sub x} powders. Moreover, the as-prepared films from dispersion solution of Cs{sub 0.33}WO{sub 3−x}F{sub x} particles exhibited higher near-infrared (NIR) shielding ability and heat insulating properties than that of the undoped Cs{sub 0.33}WO{sub 3} film. Particularly, the as-prepared Cs{sub 0.33}WO{sub 3−x}F{sub x} sample with F/W (molar ratio)=0.45 showed best NIR shielding ability and transparent heat insulating performance. The formation mechanism of nanorod-like particles and the effects of F doping on the properties of Cs{sub 0.33}WO{sub 3−x}F{sub x} products were discussed. - Graphical abstract: F-doped Cs{sub 0.33}WO{sub 3−x}F{sub x} particles were successfully synthesized by the hydrothermal method with hydrofluoric acid as fluorine source. HF acid addition in the precursor solution could increase the yield of Cs{sub 0.33}WO{sub 3−x}F{sub x} powders and promote the formation of rod-like Cs{sub 0.33}WO{sub 3−x}F{sub x} particles. Moreover, the as-prepared Cs{sub 0.33}WO{sub 3−x}F{sub x} films from dispersion solution of Cs{sub 0.33}WO{sub 3−x}F{sub x} particles exhibited higher near-infrared (NIR) shielding ability and heat insulating properties than that of the undoped Cs{sub x}WO{sub 3} film. Particularly, the as-prepared Cs{sub 0.33}WO{sub 3−x}F{sub x} sample with F/W (molar ratio)=0.45 showed best NIR shielding ability and transparent heat insulating performance. - Highlights: • F-doped Cs{sub 0.33}WO{sub 3−x}F{sub x} powders were successfully synthesized by the hydrothermal method. • HF acid addition could promote the formation of rod-like Cs{sub 0.33}WO{sub 3−x}F{sub x} particles. • The near infrared shielding ability of Cs{sub 0.33}WO{sub 3} was further improved by F doping. • The Cs{sub 0.33}WO{sub 3−x}F{sub x} films exhibited higher transparent heat insulation than Cs{sub 0.33}WO{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of surface loading and bulk doping of La{sup 3+} on the thermal stability and photocatalytic activity of Bi{sub 2}O{sub 2}CO{sub 3}

Graphical abstract: The Bi{sub 2}O{sub 2}O{sub 3} modified La{sup 3+} was synthesized using two methods of co-precipitation (La-Bi{sub 2}O{sub 2}O{sub 3}) and wet impregnation (La/Bi{sub 2}O{sub 2}O{sub 3}). As compared with La-Bi{sub 2}O{sub 2}O{sub 3}, Bi{sub 2}O{sub 2}CO{sub 3} can be effectively stabilized by impregnation method, as La{sup 3+} is mainly dispersed onto the surface of Bi{sub 2}O{sub 2}O{sub 3}. In photocatalytic degradation of MO, it is found that the surface modification with La{sup 3+} can enhance the photocatalytic efficiency of Bi{sub 2}O{sub 2}O{sub 3}. The surface loading La{sup 3+} could act as an effective electron scavenger to trap the CB electrons of Bi{sub 2}O{sub 2}CO{sub 3} to reduce the recombination of electrons and holes in the surface. - Highlights: • The effect of La{sup 3+} on the thermal stability of Bi{sub 2}O{sub 2}CO{sub 3} is different for the impregnation method and coprecipitation method. • Bi2O2CO3 can be effectively stabilized by impregnation method, as La3+ is mainly dispersed onto the surface of Bi2O2O3. • Surface loading La3+ is benefit for the improvement in the photocatalytic activity of Bi2O2CO3. • Surface modification of La3+ greatly suppresses the charge recombination of photogenerated electron–hole pairs in Bi2O2CO3. - Abstract: The Bi{sub 2}O{sub 2}O{sub 3} modified La{sup 3+} was synthesized using two methods of co-precipitation (La-Bi{sub 2}O{sub 2}O{sub 3}) and wet impregnation (La/Bi{sub 2}O{sub 2}O{sub 3}). The effects of the above two modification methods on the stability of Bi{sub 2}O{sub 2}CO{sub 3} after calcination and the physicochemical properties of Bi{sub 2}O{sub 2}CO{sub 3} were investigated by XRD, SEM, BET, and XPS. As compared with La-Bi{sub 2}O{sub 2}O{sub 3}, it is observed that Bi{sub 2}O{sub 2}CO{sub 3} can be effectively stabilized by impregnation method, as La{sup 3+} is mainly dispersed onto the surface of Bi{sub 2}O{sub 2}O{sub 3}. The photocatalytic activities for the methyl orange degradation for the La/Bi{sub 2}O{sub 2}CO{sub 3} and the La-Bi{sub 2}O{sub 2}CO{sub 3} samples were tested, and the results showed that surface doping (impregnation method) is benefit for the improvement in the photocatalytic activity, as compared with bulk doping (coprecipitation method). PL characterization revealed the differences in the photocatalytic process for surface doping and bulk doping. The surface modification of La{sup 3+} greatly suppresses the charge recombination of photogenerated electron−hole pairs in Bi{sub 2}O{sub 2}CO{sub 3}, which would be beneficial to improve their photocatalytic activity.

36 MATERIALS SCIENCE↗

Suppression of vacancy aggregation by silicon-doping in low-temperature-grown Ga{sub 1-x}Cr{sub x}N

Effect of Si doping on low-temperature grown GaCrN films has been investigated by positron annihilation spectroscopy. In undoped GaCrN films grown at 540 Degree-Sign C, vacancy clusters with sizes of V{sub 6}-V{sub 12} were found to be responsible for positron trapping. Such vacancy clusters were considerably suppressed in Si-doped GaCrN films grown at 540 Degree-Sign C, although divacancies (V{sub Ga}V{sub N}) still survived. The Si-doping may be one possible way to suppress vacancy aggregation during low temperature crystal growth, and the further methods to remove divacancies are required.

36 MATERIALS SCIENCE↗

Influence of aluminium doping on thermoelectric performance of atomic layer deposited ZnO thin films

We study the effect of Al doping on thermoelectric power factor of ZnO films grown using atomic layer deposition method. The overall doping level is tuned by either varying the precursor pulsing sequence or by varying the number of precursor pulses while keeping the sequence unchanged. We observe that commonly utilized doping approach when periodic dopant layers are densely packed results in reduced power factor. At the same time, we find that thermoelectric performance can be improved by clustering the dopants. In addition, the clustering was found to tune the preferred crystal orientation of the polycrystalline film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical, optical, and magnetic properties of Sn doped α-Ga{sub 2}O{sub 3} thin films

We investigated the effect of Sn doping on the optical, electrical, and magneto transport properties of epitaxial α-Ga{sub 2}O{sub 3} thin films grown by mist-Chemical Vapour Deposition. Sn introduces a shallow donor level at ∼0.1 eV and has a high solubility allowing doping up to 10{sup 20 }cm{sup −3}. The lowest obtained resistivity of the films is 2.0 × 10{sup −1 }Ω cm. The Sn doped films with a direct band gap of 5.1 eV remain transparent in the visible and UV range. The electrical conduction mechanism and magneto-transport have been investigated for carrier concentrations below and above the insulator-metal transition. The magnetic properties of the neutral Sn donor and the conduction electrons have been studied by electron spin resonance spectroscopy. A spin S = 1/2 state and C{sub 3V} point symmetry of the neutral Sn donor is found to be in good agreement with the model of a simple Sn{sub Ga} center.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗