Search NASA⌕ Search

SEARCH · Search NASA

Results for “observable behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Thermal Stability Analysis of Gevo Jet Fuel Using Ellipsometry

Thermal stability is an important characteristic of alternative fuels that must be evaluated before they can be used in aviation engines. This characteristic is of great importance to the effectiveness of the fuel as a coolant and to the engine's combustion performance. The thermal stability of Gevo fuel, an alcohol to jet fuel made from plant feedstock was studied. This analysis was used to make comments on the effectiveness of the current thermal stability test standard. This work was performed using a spectroscopic ellipsometer to measure the thickness of deposits left on aluminum substrates. It was observed that Gevo deposit thickness increased slowly up to 375 C and much more rapidly after that point. Similar behavior was observed in JP-8 fuel. Comparisons were also made between color standard ratings and ellipsometric thickness measurements, and it was found that in some cases, darker colors did not indicate thicker deposits. Reference tubes were used to validate the optical models used in this work, and different optical constants were found to best model the results than what are published in the ASTM D3241 test method for thermal stability.

Ellipsometry↗

Generation of long time creep data on refractory alloys at elevated temperatures

Creep tests were conducted on two tantalum alloys (ASTAR 811C and T-111 alloy), on a molybdenum alloy (TZM), and on CVD tungsten. The T-111 alloy 1% creep life data have been subjected to Manson's station function analysis, and the progress on this analysis is described. In another test program, the behavior of T-111 alloy with continuously varying temperatures and stresses has been studied. The results indicated that the previously described analysis predicts the observed creep behavior with reasonable accuracy. In addition to the T-111 test program, conventional 1% creep life data have been obtained for ASTAR 811C alloy. Previously observed effects of heat treatment on the creep strength of this material have been discussed and a model involving carbide strengthening primarily at the grain boundaries, rather than in a classical dispersion hardening mechanism, has been proposed to explain the observed results.

Sheffler, K. D.↗

Precipitation behavior of stainless steel weld overlay cladding exposed to a long-term thermal aging

Highlights: • Silicide phase formation with G-phase was first time to be observed. • Precipitation behavior discrepancy existed at different locations of ferrite phase. • G-phase and silicide phase formed along dislocations and within ferrite matrix. • Heterogeneous distribution of elements induced silicide phase formation. - Abstract: Thermal aging behavior of stainless steel weld overlay cladding aged at 400 °C for 10,000 h was investigated. The results showed that the precipitates along the dislocation and within ferrite matrix contained the face-centered cubic structural G-phase and silicide phase. Silicide phase, supposed to be (Fe, Mn){sub 3}Si phase, preferred to form with G-phase along the dislocations and within ferrite matrix. Silicide phase showed a cube-on-cube relationship with ferrite phase and G-phase. Heterogeneous distribution of elements within Ni-Mn-Si clusters was responsible for silicide phase formation during thermal aging process, and the corresponding precipitation behavior discrepancy at different forming sites (dislocations, ferrite matrix and phase boundary) was discussed.

36 MATERIALS SCIENCE↗

Cracked rotor demonstration

The purpose of this demonstration is to observe the behavior of a rotor with a single crack. This will be presented in oscilloscope orbits, 2X POLAR PLOTS, and spectrum cascade diagrams. Crack detection must be observed in all three formats and monitored over a period of time or start-ups. The change in the 2X behavior pattern provides an early warning that a crack potentially exists and that it is likely propagating toward total rotor fracture.

Bosmans, R. F.↗

Structural And Magnetic Properties Of Mn-Doped SiC

Structural and magnetic properties of manganese (Mn)-doped silicon carbide (SiC) are investigated. Two Mn-doping methods of 'thermal diffusion' and 'ion implantation' are employed using 4H (hexagonal)- and 3C (cubic)-SiC homoepitaxial wafer as the host material. In the case of 4H-SiC doped using the thermal diffusion method, the extended X-ray absorption fine structure (EXAFS) analysis suggests that most Mn atoms are incorporated on the interstitial site in the 4H-SiC lattice, and a paramagnetic behavior is observed in the magnetization measurement. For the Mn-implanted 3C-SiC, on the other hand, we detect ferromagnetic behaviors and a Curie temperature is found to reach to 245 K.

36 MATERIALS SCIENCE↗

Microwave emission from lead zirconate titanate induced by impulsive mechanical load

This paper focuses on microwave emission from Lead zirconate titanate Pb [Zr{sub x}Ti{sub 1−x}] O{sub 3} (PZT) induced by mechanical stressing. The mechanical stress was initiated by impact of a sharp tungsten indenter on the upper surface of PZT ceramic. The sequences of microwave and current impulses, which flew from indenter to electric ground, were detected simultaneously. The voltage between the upper and lower surface of ceramic was measured to obtain the behavior of mechanical force acting on ceramic during the impact. It was found that the amplitude, form, and frequency of measured microwave impulses were different by compression and restitution phase of impact. Two different mechanisms of electron emission, responsible for microwave impulse generation, were proposed based on the dissimilar impulse behavior. The field emission from tungsten indenter is dominant during compression, whereas ferroemission dominates during restitution phase. Indeed, it was observed that the direction of the current flow, i.e., sign of current impulses is changed by transitions from compression to restitution phase of impact. The observed dissimilar behavior of microwave impulses, caused by increasing and decreasing applied force, can be used to calculate the contact time and behavior of mechanical force during mechanical impact on ceramic surface. It is shown that the generation of microwave impulses exhibits high reproducibility, impulse intensity, a low damping factor, and high mechanical failure resistance. Based on these microwave emission properties of PZT, the development of new type of stress sensor with spatial resolution of few microns becomes possible.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reduced-order modeling for nonlocal diffusion problems

In several settings, diffusive behavior is observed to not follow the rate of spread predicted by parabolic partial differential equations (PDEs) such as the heat equation. Such behaviors, often referred to as anomalous diffusion, can be modeled using nonlocal equations for which points at a finite distance apart can interact. An example of such models is provided by fractional derivative equations. Because of the nonlocal interactions, discretized nonlocal systems have less sparsity, often significantly less, compared with corresponding discretized PDE systems. As such, the need for reduced-order surrogates that can be used to cheaply determine approximate solutions is much more acute for nonlocal models compared with that for PDEs. In this paper, we consider the construction, application, and testing of proper orthogonal decomposition (POD) reduced models for an integral equation model for nonlocal diffusion. For certain modeling parameters, the model we consider allows for discontinuous solutions and includes fractional Laplacian kernels as a special case. Preliminary computational results illustrate the potential of using POD to obtain accurate approximations of solutions of nonlocal diffusion equations at much lower costs compared with, for example, standard finite element methods. Copyright © 2016 John Wiley & Sons, Ltd.

97 MATHEMATICS AND COMPUTING↗

Impact of Liquid-Vapor to Liquid-Liquid-Vapor Phase Transitions on Asphaltene-Rich Nanoaggregate Behavior in Athabasca Vacuum Residue + Pentane Mixtures

The bulk phase behavior of heavy oil + alkane mixtures and the behavior of the asphaltenes that they contain are topics of importance for the design and optimization of processes for petroleum production, transport, and refining and for performing routine saturates, aromatics, resins, and asphaltenes (SARA) analyses. In prior studies, partial phase diagrams and phase behavior models for Athabasca vacuum residue (AVR) comprising 32 wt % pentane asphaltenes + n-alkanes were reported. For mixtures with pentane, observed phase behaviors included single-phase liquid as well as liquid–liquid, liquid–liquid–vapor, and liquid–liquid–liquid–vapor regions. Dispersed solids were detected under some conditions as well but not quantified. In this work, small-angle X-ray scattering (SAXS) is used to study nanostructured materials in liquid phases present in AVR + n-pentane mixtures from 50 to 170 °C at mixture bubble pressure. The investigation focuses on the impact of the transition from a single AVR-rich liquid to co-existing pentane-rich and AVR-rich liquids on the nanostructure and the nanostructures most resistant to aggregation as the pentane composition axis is approached. Background scattering subtraction was performed using global mixture composition. The robustness of this assumption with respect to values obtained for coefficients appearing in a two level Beaucage unified equation fit is demonstrated. The nanostructured material is shown to arise at two length scales from 1 to 100 wt % AVR. Smaller nanostructures possess mean radii less than 50 Å, while the larger nanostructures possess mean radii greater than 250 Å. The addition of pentane to the AVR causes an increasingly large fraction of the large and small nanostructures to grow in size. Only nanostructures resistant to aggregation remain in the pentane-rich phase as the 0 wt % AVR axis is approached. Step changes in aggregation identified from changes in average radius of gyration, scattering coefficients, and surface/volume ratios arise at the liquid–vapor to liquid–liquid–vapor transition (~40 wt % pentane) and within the liquid–liquid–vapor region (~90 wt % pentane). The temperature is shown to have a limited effect on the mean size and structure of the nanostructured material present, irrespective of global composition.

Long, Bingwen↗

Boundary migration in a 3D deformed microstructure inside an opaque sample

How boundaries surrounding recrystallization grains migrate through the 3D network of dislocation boundaries in deformed crystalline materials is unknown and critical for the resulting recrystallized crystalline materials. Furthermore, by using X-ray Laue diffraction microscopy, we show for the first time the migration pattern of a typical recrystallization boundary through a well-characterized deformation matrix. The data provide a unique possibility to investigate effects of both boundary misorientation and plane normal on the migration, information which cannot be accessed with any other techniques. Our results show that neither of these two parameters can explain the observed migration behavior. Instead we suggest that the subdivision of the deformed microstructure ahead of the boundary plays the dominant role. Our experimental observations challenge the assumptions of existing recrystallization theories, and set the stage for determination of mobilities of recrystallization boundaries.

36 MATERIALS SCIENCE↗

Magnetic studies of magnesium ferrite nanoparticles prepared by sol-gel technique

Mg-ferrite nanoparticles were prepared by sol-gel technique and were annealed at different temperatures in air for 4 hours. Structural studies by X-ray diffraction confirmed the Mg-ferrite phasein all the samples annealed up to 600°C. Traces of α-Fe{sub 2}O{sub 3} were found for the sample annealed at higher temperature of 750°C.Grain size was found to be increasedfrom 13nm to 37nm with the increase in the annealing temperature. These samples showed super-paramagentic behavior at 300K where as at 60K they showed ferrimagnetic behavior.For the as prepared sample the magnetization value of 21emu/g was observed at 300K. The highest magnetization value of 24 emu/g which is ∼ 90% of the bulk value of Mg-ferrite, was observed at 300K for the sample annealed at 750°C.The observed magnetic behavior of these nanoparticles may be understood on the basis of nanosize grains, increase inrandom anisotropy and reduced thermal effects at low temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reconstruction of effective potential from statistical analysis of dynamic trajectories

The broad incorporation of microscopic methods is yielding a wealth of information on the atomic and mesoscale dynamics of individual atoms, molecules, and particles on surfaces and in open volumes. Analysis of such data necessitates statistical frameworks to convert observed dynamic behaviors to effective properties of materials. Here, we develop a method for the stochastic reconstruction of effective local potentials solely from observed structural data collected from molecular dynamics simulations (i.e., data analogous to those obtained via atomically resolved microscopies). Using the silicon vacancy defect in graphene as a model, we apply the statistical framework presented herein to reconstruct the free energy landscape from the calculated atomic displacements. Evidence of consistency between the reconstructed local potential and the trajectory data from which it was produced is presented, along with a quantitative assessment of the uncertainty in the inferred parameters.

74 ATOMIC AND MOLECULAR PHYSICS↗

Intrinsic Correlations for Flaring Blazars Detected by Fermi

Blazars are an extreme subclass of active galactic nuclei. Their rapid variability, luminous brightness, superluminal motion, and high and variable polarization are probably due to a beaming effect. However, this beaming factor (or Doppler factor) is very difficult to measure. Currently, a good way to estimate it is to use the timescale of their radio flares. In this Letter, we use multiwavelength data and Doppler factors reported in the literature for a sample of 86 flaring blazars detected by Fermi to compute their intrinsic multiwavelength data and intrinsic spectral energy distributions and investigate the correlations among observed and intrinsic data. Quite interestingly, intrinsic data show a positive correlation between luminosity and peak frequency, in contrast with the behavior of observed data, and a tighter correlation between γ -ray luminosity and the lower-energy ones. For flaring blazars detected by Fermi , we conclude that (1) observed emissions are strongly beamed; (2) the anti-correlation between luminosity and peak frequency from the observed data is an apparent result, the correlation between intrinsic data being positive; and (3) intrinsic γ -ray luminosity is strongly correlated with other intrinsic luminosities.

79 ASTRONOMY AND ASTROPHYSICS↗

A numerical study of the steady scalar convective diffusion equation for small viscosity

A time-independent convection diffusion equation is studied by means of a compact finite difference scheme and numerical solutions are compared to the analytic inviscid solutions. The correct internal and external boundary layer behavior is observed, due to an inherent feature of the scheme which automatically produces upwind differencing in inviscid regions and the correct viscous behavior in viscous regions.

Giles, M. B.↗

A numerical study of the steady scalar convective diffusion equation for small viscosity

A time-independent convection diffusin equation is studied by means of a compact finite difference scheme and numerical solutions are compared to the analytic inviscid solutions. The correct internal and external boundary layer behavior is observed, due to an inherent feature of the scheme which automatically produces upwind differencing in inviscid regions and the correct viscous behavior in viscous regions.

Giles, M. B.↗

Fault structures in rapidly quenched Ni-Mo binary alloys

Fault structures in two Ni-Mo alloy ribbons (Ni-28 at. pct Mo and Ni-35 at. pct Mo) cast by a free jet chill block melt spinning process were studied. Thin foils for TEM studies were made by electrochemical thinning using an alcohol/butyl cellosolve/perchloric acid mixture in a twin jet electropolishing device. The samples displayed typical grains containing linear faulted regions on the wheelside of the two alloy ribbons. However, an anomalous diffraction behavior was observed upon continuous tilting of the sample: the network of diffraction spots from a single grain appeared to expand or contract and rotate. This anomalous diffraction behavior was explained by assuming extended spike formation at reciprocal lattice points, resulting in a network of continuous rel rods. The validity of the model was confirmed by observations of a cross section of the reciprocal lattice parallel to the rel rods.

Jayaraman, N.↗

Analysis of Silver Release from Furnace-Tested TRISO Particles

High temperature testing of intact TRISO particles previously irradiated in the AGR-5/6/7 experiment was performed in the Furnace for Irradiated TRISO Testing (FITT) to directly confirm diffusive release of silver and europium from intact TRISO particles. Testing was conducted from 1,100–1,600°C for exposure times up to 100 h to directly confirm silver through layer release below safety testing temperatures. The FITT analysis showed highest levels of silver release at 1,300–1,400°C which confirms athermal release behaviors previous observed in step-wise and transient safety tests. Additionally, release was non-uniform with some particles releasing a majority of their inventory while others did not appear to release silver under identical testing conditions, which was consistent with historic observations. An assessment of the effective silver diffusion coefficient in the SiC layer was conducted and indicated maximum values in the 1,300–1,400°C range. The magnitude of the calculated diffusion coefficients also exceeded currently accepted diffusion coefficients. The release behavior of europium from intact particles was also analyzed in FITT for at 1,450–1,550°C for 500 h to 750 h. Direct confirmation of europium release below safety testing temperatures was confirmed absent contributions from matrix release. The analysis indicated europium release follows a general Arrhenius behavior and suggests general uniform release and indicates irradiation conditions influence observed release response. Calculated diffusion kinetics agree well with historic experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A pulse-controlled modified-burst test instrument for accident-tolerant fuel cladding

Pellet-cladding mechanical interaction due to thermal expansion of nuclear fuel pellets during a reactivity-initiated accident (RIA) is a potential mechanism for failure of nuclear fuel cladding. To investigate the mechanical behavior of cladding during an RIA, we developed a mechanical pulse-controlled modified burst test instrument that simulates transient events with a pulse width from 10 to 300 ms. This paper includes validation tests of unirradiated and prehydrided ZIRLO cladding tubes. A ZIRLO cladding sample with a hydrogen content of 168 wt. ppm showed ductile behavior and failed at the maximum limits of the test setup with hoop strain to failure greater than 9.2%. ZIRLO samples showed high resistance to failure even at very high hydrogen contents (1,466 wt. ppm). When the hydrogen content was increased to 1,554 wt. ppm, brittle-like behavior was observed at a hoop strain of 2.5%. Preliminary scoping tests at room temperature with FeCrAl tubes were conducted to imitate the pulse behavior of transient test reactors during integral tests. The preliminary FeCrAl tests are informative from the perspective of characterizing the test rig and supporting the design of integral tests for current and potentially accident tolerant cladding materials.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Synthesis, structure and physical properties of reduced barium titanate Ba{sub 2}Ti{sub 13}O{sub 22}

Polycrystalline sample of the reduced barium titanate Ba{sub 2}Ti{sub 13}O{sub 22} was synthesized by solid state reaction at 1523 K in Ar atmosphere for the first time. The Rietveld refinement using the powder X-ray diffraction data confirmed the sample to be main phase of Ba{sub 2}Ti{sub 13}O{sub 22} having the orthorhombic crystal system, space group Bmab and the lattice parameters of a=11.67058(11) A, b=14.12020(13) A and c=10.06121(9) A, and V=1657.995(20) A{sup 3}. The valence state of Ti was evaluated by both the Ti-O bond distance analysis and the Ti K-edge XANES analysis. The magnetic susceptibility was nearly temperature independent in the range of 60-300 K, suggesting the Van Vleck Paramagnetism. The electrical conductivity at 300 K is approximately 320.50 S/cm, and a semiconducting behavior was observed below room temperature. The Seebeck coefficient showed a negative value of -1.25 {mu}V/K at 300 K, indicating n-type behavior. These facts were confirmed by the results of the present theoretical calculations by the FLAPW method. - Graphical abstract: Temperature dependence of the electrical conductivity of Ba{sub 2}Ti{sub 13}O{sub 22}. A plot of ln {sigma} versus T{sup -1} is shown by open circles, and a plot of ln {sigma} versus T{sup -1/4} is shown by open triangles. Highlights: > Polycrystalline samples of Ba{sub 2}Ti{sub 13}O{sub 22} synthesis by solid state reaction. > Theoretical calculation by FLAPW method. > Electrical property measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗