Search NASA⌕ Search

SEARCH · Search NASA

Results for “parallel planes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Constant-frequency, clamped-mode resonant converters

Two novel clamped-mode resonant converters are proposed which operate at a constant frequency while retaining many desired features of conventional series- and parallel-resonant converters. State-plane analysis techniques are used to identify all possible operating modes and define their mode boundaries. Control-to-output characteristics are derived that specify the regions for natural and forced commutation. The predicted operating modes are verified using a prototype circuit.

Tsai, Fu-Sheng↗

Analysis of rotationally symmetric arrays of apertures on conducting spherical surfaces

Rotationally symmetric arrays of circular waveguide fed apertures on conducting spherical surfaces have been analyzed. Representation of the outside electromagnetic fields in terms of spherical transmission line modes permit the array analysis to be viewed as a spherical waveguide junction discontinuity problem. The apertures, in general, carry dual polarized circular waveguide TE11 modes. Two independent formulations - the unit cell method and the eigenexcitation method that take rotational symmetry into account - are developed and are checked against each other numerically for computational accuracy. These two formulations are analytically linked as discrete Fourier series pairs. It is seen that mutual coupling along the array decays more rapidly when the polarization of excitation is perpendicular to the array plane than when it is parallel to it. This analysis has been applied in the performance analysis of the Dome Lens phased array radar antenna.

Bondyopadhyay, Probir K.↗

Tape casting and partial melting of Bi-2212 thick films

To produce Bi-2212 thick films with high critical current densities tape casting and partial melting is a promising fabrication method. Bi-2212 powder and organic additives were mixed into a slurry and tape casted onto glass by the doctor blade tape casting process. The films were cut from the green tape and partially molten on Ag foils during heat treatment. We obtained almost single-phase and well-textured films over the whole thickness of 20 microns. The orientation of the (a,b)-plane of the grains was parallel to the substrate with a misalignment of less than 6 deg. At 77 K/0T a critical current density of 15, 000 A/sq cm was reached in films of the dimension 1 cm x 2 cm x 20 microns (1 micron V/cm criterion, resistively measured). At 4 K/0T the highest value was 350,000 A/sq cm (1 nV/cm criterion, magnetically measured).

Buhl, D.↗

Effect of various approximations on predicted progressive failure in plain weave composites

Three-dimensional finite element analysis was used to simulate progressive failure of a plain weave composite subjected to in-plane extension. The loading was parallel to one of the tow directions. The effects of various characteristics of the finite element model on predicted behavior were examined. The predicted behavior was found to be sensitive to quadrature order, mesh refinement, and the material degradation model. Also the sensitivity of the predictions to the tow waviness was studied. The predicted strength decreased considerably with increased waviness. More numerical studies and comparisons with experimental data are needed to establish reliable guidelines for accurate progressive failure prediction.

Whitcomb, John↗

Energetic Electrons in Dipolarization Events: Spatial Properties and Anisotropy

Using the electromagnetic fields of an MHD simulation of magnetotail reconnection, flow bursts, and dipolarization, we further investigate the acceleration of electrons to suprathermal energies. Particular emphasis is on spatial properties and anisotropies as functions of energy and time. The simulation results are compared with Time History of Events and Macroscale Interactions during Substorms observations. The test particle approach successfully reproduces several observed injection features and puts them into a context of spatial maps of the injection region(s): a dominance of perpendicular anisotropies farther down the tail and closer to the equatorial plane, an increasing importance of parallel anisotropy closer to Earth and at higher latitudes, a drop in energy fluxes at energies below approximately 10 keV, coinciding with the plasma density drop, together with increases at higher energy, a triple peak structure of flux increases near 0 deg, 90 deg, and 180 deg, and a tendency of flux increases to extend to higher energy closer to Earth and at lower latitudes. We identified the plasma sheet boundary layers and adjacent lobes as a main source region for both increased and decreased energetic electron fluxes, related to the different effects of adiabatic acceleration at high and low energies. The simulated anisotropies tend to exceed the observed ones, particularly for perpendicular fluxes at high energies. The most plausible reason is that the MHD simulation lacks the effects of anisotropy-driven microinstabilities and waves, which would reduce anisotropies.

anisotropy↗

Optical fiber connector ferrule assembly having dual reflective surfaces for beam expansion and expanded beam connector incorporating same

An expanded beam ferrule includes a first ferrule halve having first reflective surfaces and a second ferrule halve having second reflective surfaces, which together retain optical fibers. The pair of reflective surfaces output collimated light parallel to the mid-plane of the ferrule. An external sleeve aligns the external surface of two similar ferrules, with corresponding second reflective surfaces of the ferrules facing each other. Output light from an optical fiber held in one ferrule is bent twice by the pair of reflective surfaces, with beam divergence after the first bent, and collimation after the second bent. The collimated light is transmitted to the facing second reflective surface in a facing second ferrule aligned by the sleeve, which is subject to optical reshaping in reverse to that undertaken in the first ferrule, so as to converge and focus light to input to the optical fiber held in the other ferrule.

Li, Shuhe↗

Optical fiber connector ferrule assembly having dual reflective surfaces for beam expansion and expanded beam connector incorporating same

An expanded beam ferrule includes a first ferrule halve having first reflective surfaces and a second ferrule halve having second reflective surfaces, which together retain optical fibers. The pair of reflective surfaces output collimated light parallel to the mid-plane of the ferrule. An external sleeve aligns the external surface of two similar ferrules, with corresponding second reflective surfaces of the ferrules facing each other. Output light from an optical fiber held in one ferrule is bent twice by the pair of reflective surfaces, with beam divergence after the first bent, and collimation after the second bent. The collimated light is transmitted to the facing second reflective surface in a facing second ferrule aligned by the sleeve, which is subject to optical reshaping in reverse to that undertaken in the first ferrule, so as to converge and focus light to input to the optical fiber held in the other ferrule.

42 ENGINEERING↗

Controlling the magnetic and optical responses of a MoS 2 monolayer by lanthanide substitutional doping: a first-principles study

Here, the electronic, magnetic and optical properties of lanthanide substitutional doping (~2% concentration) on the MoS 2 monolayer have been investigated within the density functional theory formalism together with the Hubbard correction (DFT+U). The dopants investigated include Ce, Eu, Gd, Lu and Tm. The calculated dopant substitutional energies under both Mo-rich and S-rich conditions suggest that it is possible to experimentally realize the lanthanide doped MoS 2 monolayer systems. The Eu, Gd and Tm dopants induce strong magnetization in the host lattice. The electronic structure calculations reveal that the dopants have a p-type character and they exhibit a half-metallic behavior in the Gd and Eu doped systems. A dilute magnetic semiconducting behavior can also be realized in Gd, Eu and Tm doped systems by slightly tuning the Fermi level. All the dopants refine the optical responses of the host system with the onset of the optical absorption edge shifting to lower energies within the visible range (red shift phenomenon). We observe an optical anisotropy for two different directions of the electric field (E) polarizations, i.e. parallel, E∥, and perpendicular, E⊥, to the xy-plane. Lanthanide substitutional doping significantly influences the electron energy loss spectra (EELS), absorption spectra, and dielectric properties of the host MoS 2 monolayer. Furthermore, we notice that lanthanide substitutional doping could enhance the photocatalytic properties of the MoS 2 monolayer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alfven wave transport effects in the time evolution of parallel cosmic-ray-modified shocks

This paper presents a numerical study of the time evolution of plane, cosmic-ray modified shocks with magnetic field parallel to the shock normal, based on the diffusive shock acceleration formalism and including the effects from the finite propagation speed and energy of Alfven waves responsible for controlling the transport of the cosmic rays. The simulations discussed are based on a three-fluid model for the dynamics, but a more complete formalism is laid out for future work. The results of the simulations confirm earlier steady state analyses that found these Alfven transport effects to be potentially important when the upstream Alfven speed and the gas sound speed are comparable, i.e., when the plasma and magnetic pressures are similar. It is also clear, however, that the impact of Alfven transport effects, which tend to slow shock evolution and reduce the time asymptotic cosmic-ray pressure in the shock, is strongly dependent upon uncertain details in the transport models. Both cosmic-ray advection tied to streaming Alfven waves and dissipation of wave energy are important to include in the models. Further, Alfven transport properties on both sides of the shock are also influential.

Jones, T. W.↗

Perpendicular in-plane negative magnetoresistance in ZrTe 5

The unique band structure in topological materials frequently results in unusual magneto-transport phenomena, one of which is in-plane longitudinal negative magnetoresistance (NMR) with the magnetic field aligned parallel to the electrical current direction. This NMR is widely considered as a hallmark of chiral anomaly in topological materials. Here we report the observation of in-plane NMR in the topological material ZrTe 5 when the in-plane magnetic field is both parallel and perpendicular to the current direction, revealing an unusual case of quantum transport beyond the chiral anomaly. We find that a general theoretical model, which considers the combined effect of Berry curvature and orbital moment, can quantitatively explain this in-plane NMR. In conclusion, our results provide new insights into the understanding of in-plane NMR in topological materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The eigenvalue spectrum of the Orr-Sommerfeld problem

A numerical investigation of the temporal eigenvalue spectrum of the ORR-Sommerfeld equation is presented. Two flow profiles are studied, the plane Poiseuille flow profile and the Blasius boundary layer (parallel): flow profile. In both cases a portion of the complex c-plane bounded by 0 less than or equal to CR sub r 1 and -1 less than or equal to ci sub i 0 is searched and the eigenvalues within it are identified. The spectra for the plane Poiseuille flow at alpha = 1.0 and R = 100, 1000, 6000, and 10000 are determined and compared with existing results where possible. The spectrum for the Blasius boundary layer flow at alpha = 0.308 and R = 998 was found to be infinite and discrete. Other spectra for the Blasius boundary layer at various Reynolds numbers seem to confirm this result. The eigenmodes belonging to these spectra were located and discussed.

Antar, B. N.↗

Particle-in-cell simulation study of the scaling of asymmetric magnetic reconnection with in-plane flow shear

We investigate magnetic reconnection in systems simultaneously containing asymmetric (anti-parallel) magnetic fields, asymmetric plasma densities and temperatures, and arbitrary in-plane bulk flow of plasma in the upstream regions. Such configurations are common in the high-latitudes of Earth's magnetopause and in tokamaks. We investigate the convection speed of the X-line, the scaling of the reconnection rate, and the condition for which the flow suppresses reconnection as a function of upstream flow speeds. We use two-dimensional particle-in-cell simulations to capture the mixing of plasma in the outflow regions better than is possible in fluid modeling. We perform simulations with asymmetric magnetic fields, simulations with asymmetric densities, and simulations with magnetopause-like parameters where both are asymmetric. For flow speeds below the predicted cutoff velocity, we find good scaling agreement with the theory presented in Doss et al. [J. Geophys. Res. 120, 7748 (2015)]. Applications to planetary magnetospheres, tokamaks, and the solar wind are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of expansion ratio on the calculation of parallel-walled backward-facing step flows - Comparison of four models of turbulence

This paper presents a numerical study of the effects of expansion ratio on two-dimensional separating and reattaching flows in plane backward-facing step geometries with parallel walls. Closure of the Reynolds equations was achieved by four different turbulence models: k-epsilon, 'modified' k-epsilon, algebraic stress, and 'modified' algebraic stress models. The k-epsilon model relates the Reynolds stresses to the mean rate of strain through the definition of an isotropic turbulent viscosity. The more advanced algebraic stress model calculates the stresses from implicit algebraic relationships containing the stresses themselves, the mean rate of strain, and the turbulent kinetic energy and its dissipation rate. 'Modified' versions of the models employ a new dissipation rate equation whose production term was made more sensitive to streamwise curvature effects. A new nonequilibrium wall function treatment proposed by Chieng and Launder (1980) was also incorporated into each model.

Sindir, M. M.↗

Parallelization of Lower-Upper Symmetric Gauss-Seidel Method for Chemically Reacting Flow

Development of technologies for exploration of the solar system has revived an interest in computational simulation of chemically reacting flows since planetary probe vehicles exhibit non-equilibrium phenomena during the atmospheric entry of a planet or a moon as well as the reentry to the Earth. Stability in combustion is essential for new propulsion systems. Numerical solution of real-gas flows often increases computational work by an order-of-magnitude compared to perfect gas flow partly because of the increased complexity of equations to solve. Recently, as part of Project Columbia, NASA has integrated a cluster of interconnected SGI Altix systems to provide a ten-fold increase in current supercomputing capacity that includes an SGI Origin system. Both the new and existing machines are based on cache coherent non-uniform memory access architecture. Lower-Upper Symmetric Gauss-Seidel (LU-SGS) relaxation method has been implemented into both perfect and real gas flow codes including Real-Gas Aerodynamic Simulator (RGAS). However, the vectorized RGAS code runs inefficiently on cache-based shared-memory machines such as SGI system. Parallelization of a Gauss-Seidel method is nontrivial due to its sequential nature. The LU-SGS method has been vectorized on an oblique plane in INS3D-LU code that has been one of the base codes for NAS Parallel benchmarks. The oblique plane has been called a hyperplane by computer scientists. It is straightforward to parallelize a Gauss-Seidel method by partitioning the hyperplanes once they are formed. Another way of parallelization is to schedule processors like a pipeline using software. Both hyperplane and pipeline methods have been implemented using openMP directives. The present paper reports the performance of the parallelized RGAS code on SGI Origin and Altix systems.

Yoon, Seokkwan↗

Resonant electromagnetic scattering in anisotropic layered media

The resonant excitation of an electromagnetic guided mode of a slab structure by exterior radiation results in anomalous scattering behavior, including sharp energy-transmission anomalies and field amplification around the frequency of the slab mode. In the case of a periodically layered ambient medium, anisotropy serves to couple the slab mode to radiation. Exact expressions for scattering phenomena are proved by analyzing a pole of the full scattering matrix as it moves off the real frequency axis into the lower half complex plane under a detuning of the wavevector parallel to the slab. The real pole is the frequency of a perfect (infinite Q) guided mode, which becomes lossy as the frequency gains an imaginary part. This work extends results of Shipman and Venakides to evanescent source fields and two-dimensional parallel wavevector and demonstrates by example how the latter allows one to control independently the width and central frequency of a resonance by varying the angle of incidence of the source field. The analysis relies on two nondegeneracy conditions of the complex dispersion relation for slab modes (relating poles of the scattering matrix to wavevector), which were assumed in previous works and are proved in this work for layered media. One of them asserts that the dispersion relation near the wavevector κ and frequency ω of a perfect guided mode is the zero set of a simple eigenvalue ℓ(κ, ω), and the other relates ∂ℓ/∂ω to the total energy of the mode, thereby implying that this derivative is nonzero.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of the structure of inlet free-stream turbulence on diffuser performance

The pressure recovery coefficient of a two-dimensional diffuser (Cp) was found to be significantly affected by the intensity and structure of the inlet free-stream turbulence. Significantly larger values of Cp occurred for the case of highly anisotropic inlet free-stream turbulence with the plane of rotation of the eddies parallel to the free-stream flow and perpendicular to the diverging walls of the diffuser, as compared to the values of Cp for the case of grid-generated near-isotropic inlet conditions. The relatively high values of Cp for the case of the highly anisotropic inlet free-stream turbulence conditions can be attributed to highly effective mixing, where the plane of rotation of the eddies facilitates a direct transport of momentum from the free-stream to the boundary layers along the diverging walls of the diffuser, as compared to the mixing that occurs with grid-generated highly unorganized eddies.

Hoffmann, Jon A.↗

On the adiabatic walking of plasma waves in a pulsar magnetosphere

The pulsar radio emission is generated in the near magnetosphere of the neutron star, and it must propagate through the rest of it to emerge into the interstellar medium. An important issue is whether this propagation affects the planes of polarization of the generated radiation. Observationally, there is sufficient evidence that the emerging radiation is polarized parallel or perpendicular to the magnetic field line planes that should be associated with the ordinary (O) and extraordinary (X) plasma modes, respectively, excited by some radiative process. This strongly suggests that the excited X and O modes are not affected by the so-called adiabatic walking that causes a slow rotation of polarization vectors. In this paper, we demonstrate that the conditions for adiabatic walking are not fulfilled within the soliton model of pulsar radio emission, in which the coherent curvature radiation occurs at frequencies much lower than the characteristic plasma frequency, The X mode propagates freely and observationally represents the primary polarization mode. The O mode has difficulty escaping from the pulsar plasma; however, it is sporadically observed as a weaker secondary polarization mode. We discuss a possible scenario under which the O mode can also escape from the plasma and reach an observer.

79 ASTRONOMY AND ASTROPHYSICS↗

SU-E-J-222: Feasibility Study of MRI-Only Proton Therapy Planning

Purpose: To assess the dosimetric equivalence of MRI based proton planning vs. single energy x-ray CT. Methods: 8 glioblastoma patients were imaged with CT and MRI after surgical resection. T1-weighted 3DMPRAGE was used to delineate the GTV, which was subsequently rigidly registered to the CT volume. A pseudoCT was generated from the aligned MRI by combining segmentation and atlas-based approaches. The spatial resolution both for pseudo- and real CT was 0.6×0.6×2.5mm. Three orthogonal proton beams were simulated on the pseudoCT. Two co-planar beams were set on the axial plane. The third one was planned parallel to the cranio-caudal (CC) direction. Each beam was set to cover the GTV at 98% of the nominal dose (18Gy). The proton plan was copied and transferred to the real CT, including aperture/compensator geometry. Dose comparison between pseudoCT and CT plan was performed beam-by-beam by quantifying the range shift of dose profile on each slice of the GTV. The GTV’s V{sub 98} was computed for the CT. Results: For beams in axial plane the median absolute value of the range shift was 0.3mm, with 0.9mm and 1.4mm as 95th percentile and maximum, respectively. Worst scenarios were found for the CC beam, where we measured 1.1mm (median), 2.7mm (95thpercentile) and 5mm (maximum). Regardless the direction, beams passing through the surgical site, where metal (Titanium MRI-compatible) staples were present, were mostly affected by range shift. GTV’s V{sub 98} for CT was not lower than 99.3%. Conclusion: The study showed the clinical feasibility of an MRI-alone proton plan. Advantages include the possibility to rely on better soft tissue contrast for target and organs at risk delineation without the need of further CT scan and image registration. Additional investigation is required in presence of metal implants along the beam path and to account for partial volume effects due to slice thickness.

60 APPLIED LIFE SCIENCES↗