Search NASA⌕ Search

SEARCH · Search NASA

Results for “powder diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Improved photoluminescence properties of a new green SrB{sub 2}O{sub 4}:Tb{sup 3+} phosphor by charge compensation

Highlights: ► New green-emitting SrB{sub 2}O{sub 4}:Tb{sup 3+} phosphor was synthesized by solid-state reaction. ► Li{sup +}, Na{sup +}, and K{sup +} can all increase luminescent intensity of SrB{sub 2}O{sub 4}:Tb{sup 3+}. ► Na{sup +} is the optimal charge compensator among Li{sup +}, Na{sup +} and K{sup +}. ► SrB{sub 2}O{sub 4}:Tb{sup 3+} is a promising green phosphor for fabricating WLED. -- Abstract: A new green-emitting SrB{sub 2}O{sub 4}:Tb{sup 3+} phosphor was synthesized by solid-state reaction. X-ray powder diffraction (XRD) analysis confirmed all the samples with orthorhombic formation of SrB{sub 2}O{sub 4}. The excitation spectra indicate the phosphor can be effectively excited by near ultraviolet (NUV) light, making it attractive as conversion phosphor for LED applications. The phosphor exhibits a bright green emission with the highest photoluminescence (PL) intensity at 544 nm excited by 378 nm light. The critical quenching concentration of Tb{sup 3+} in SrB{sub 2}O{sub 4}:Tb{sup 3+} is about 10 mol%. The effects of charge compensators (Li{sup +}, Na{sup +}, and K{sup +}) on photoluminescence of SrB{sub 2}O{sub 4}:Tb{sup 3+} were also studied. The results show that the emission intensity can be improved by all the three charge compensators and Na{sup +} is the optimal one for SrB{sub 2}O{sub 4}:Tb{sup 3+}. All properties show that the phosphor is a promising green phosphor pumped by NUV InGaN chip for fabricating white light-emitting diodes (WLEDs).

36 MATERIALS SCIENCE↗

Solvothermal in situ synthesis of Fe{sub 3}O{sub 4}-multi-walled carbon nanotubes with enhanced heterogeneous Fenton-like activity

Graphical abstract: After purification, the multi-wall carbon nanotubes (MWCNTs) act as seeds for Fe{sub 3}O{sub 4} nanoparticles heterogeneous nucleation. The Fe{sub 3}O{sub 4} nanoparticles with diameter range of 4.2–10.0 nm synthesized in situ on the MWCNTs under solvothermal condition. The formed nano Fe{sub 3}O{sub 4}-MWCNTs decolorized the Acid Orange II effectively via Fenton-like reaction. Highlights: ► The amount of water tunes size and size distribution of the Fe{sub 3}O{sub 4} nanoparticles (FNs). ► FNs are homogeneously coated on the multi-walled carbon nanotubes (MWCNTs). ► FNs have diameters in the range of 4.2–10.0 nm, average grain size of 7.4 nm. ► Fe{sub 3}O{sub 4}-MWCNTs are used as a Fenton-like catalyst to decompose Acid Orange II. ► Fe{sub 3}O{sub 4}-MWCNTs displayed a higher activity than nanometer-size Fe{sub 3}O{sub 4}. -- Abstract: Fe{sub 3}O{sub 4}-multi-walled carbon nanotubes (Fe{sub 3}O{sub 4}-MWCNTs) hybrid materials were synthesized by a solvothermal process using acid treated MWCNTs and iron acetylacetonate in a mixed solution of ethylene glycol and ultrapure water. The materials were characterized using X-ray powder diffraction, scanning and transmission electron microscopy, X-ray photoelectron spectroscopy, and vibrating sample magnetometry. The results showed that a small amount of water in the synthesis system played a role in controlling crystal phase formation, size of Fe{sub 3}O{sub 4}, and the homogeneous distribution of the Fe{sub 3}O{sub 4} nanoparticles deposited on the MWCNTs. The Fe{sub 3}O{sub 4} nanoparticles had diameters in the range of 4.2–10.0 nm. They displayed good superparamagnetism at room temperature and their magnetization was influenced by the reaction conditions. They were used as a Fenton-like catalyst to decompose Acid Orange II and displayed a higher activity than nanometer-size Fe{sub 3}O{sub 4}.

36 MATERIALS SCIENCE↗

Surfactant-assisted synthesis and electrochemical performances of Cu{sub 3}P dendrites

Highlights: ► Dendrite-like Cu{sub 3}P microstructures have been synthesized by a low-temperature method. ► The surfactant SDS was used as template. ► The as-obtained Cu{sub 3}P dendrites exhibit a high first discharge capacity. -- Abstract: Well-defined Cu{sub 3}P hierarchical dendrites were successfully synthesized by a facile and effective surfactant-assisted hydrothermal approach. X-ray powder diffraction (XRD) and scanning electron microscopy (SEM) indicated that the as-obtained Cu{sub 3}P had a well-crystallized hexagonal phase and consisted of a wealth of Cu{sub 3}P dendritic microstructures. A surfactant-assisted growth accompanied by the Ostwald ripening process was proposed for the formation. As anode materials for lithium ion batteries, the electrochemical property of the Cu{sub 3}P dendrites was also examined. The results showed that the initial discharge capacity of the Cu{sub 3}P dendrites exceeded 1300 mA h/g and it still kept at 291 mA h/g after 20 cycles, which might be related to the size of Cu{sub 3}P particles and their assembly structure.

36 MATERIALS SCIENCE↗

Carbon microspheres from ethanol at low temperature: Fabrication, characterization and their use as an electrocatalyst support for methanol oxidation

Highlights: ► Carbon microbeads were prepared by the carbonization of ethanol at low temperature. ► The low temperature carbonization of ethanol was catalyzed by iodine. ► Carbon microbeads can serve as ideal candidate for catalyst supports. -- Abstract: Carbon microspheres (CMSs) with a diameter range of 2–3 μm were prepared by the iodine-catalyzed carbonization of ethanol at low temperatures by solvothermal synthesis. The reaction time, concentrations of reactants, temperatures, different alcohols as carbon precursors and reaction environments were systematically altered to determine the optimal synthesis conditions. The size and shape were characterized by scanning and transmission electron microscopy and their structure was characterized by X-ray powder diffraction and Raman spectroscopy. Energy dispersive X-ray spectroscopy, Fourier transform infrared and X-ray photoelectron spectroscopy showed that abundant oxygen-containing functional groups remain on the surface of the carbon spheres. The formation mechanism involves iodine promotion of the oxidation of ethanol, which results in formation of the CMSs. The specific activity of the CMS-supported Pt catalyst is higher than that of a commercial Pt catalyst from E-TEK or the unsupported Pt catalyst.

36 MATERIALS SCIENCE↗

The characterisation of lead-free thick-film resistors on different low temperature Co-fired ceramics substrates

Graphical abstract: Display Omitted Highlights: ► Lead free thick film resistors based on ruthenium oxide were developed. ► The compatibility of resistors with different LTCC substrates was evaluated. ► The interactions between resistors and glassy LTCC substrates were not detected. ► Electrical characteristics were comparable with commercial thick film resistors. -- Abstract: Lead-free thick-film resistors were synthesised and investigated. The thick-film resistor materials with nominal sheet resistivities from 50 ohm/sq. to 50 kohm/sq. were prepared using combinations of two lead-free glasses with reflow temperatures at 940 °C and 1240 °C, respectively, and two RuO{sub 2} powders (fine-grained and coarse-grained RuO{sub 2}). The thick-film resistors were printed and fired on alumina and on low temperature co-fired ceramics substrates and fired at 850 °C and 950 °C. The fired resistors were investigated by X-ray powder diffraction, by scanning electron microscopy and by energy dispersive X-ray analysis. The sheet resistivities, temperature coefficients of resistivity, gauge factors and noise indices were measured.

36 MATERIALS SCIENCE↗

Cd–cysteine precursor nanowire templated microwave-assisted transformation route to CdS nanotubes

Graphical abstract: Cadmium sulfide polycrystalline nanotubes have been successfully synthesized by microwave-assisted transformation method using Cd–cysteine precursor nanowires as the source material and template in ethylene glycol at 160 °C or ethanol at 60 °C. Display Omitted Highlights: ► Cd–cysteine precursor nanowires were successfully synthesized in alkaline solution. ► CdS nanotubes were prepared by templated microwave-assisted transformation method. ► CdS nanotubes can well duplicate the size and morphology of precursor nanowires. ► This method has the advantages of the simplicity and low cost. -- Abstract: We report the Cd–cysteine precursor nanowire templated microwave-assisted transformation route to CdS nanotubes. In this method, the Cd–cysteine precursor nanowires are synthesized using CdCl{sub 2}·2.5H{sub 2}O, L-cysteine and ethanolamine in water at room temperature. The Cd–cysteine precursor nanowires are used as the source material and template for the subsequent preparation of CdS nanotubes by a microwave-assisted transformation method using ethylene glycol or ethanol as the solvent. This method has the advantages of the simplicity and low cost, and may be extended to the synthesis of nanotubes of other compounds. The products are characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM).

36 MATERIALS SCIENCE↗

A Pb(In{sub 1/2}Nb{sub 1/2})O{sub 3}–Pb(Zn{sub 1/3}Nb{sub 2/3})O{sub 3}–PbTiO{sub 3} ternary ferroelectric system with high T{sub C} and high piezoelectric properties

Graphical abstract: Display Omitted Highlights: ► (0.79 − x)Pb(In{sub 1/2}Nb{sub 1/2})O{sub 3}–0.21Pb(Zn{sub 1/3}Nb{sub 2/3})O{sub 3}–xPbTiO{sub 3} ceramics were prepared by two-step method. ► A morphotropic phase boundary region has been determined in the composition range of 0.28 < x < 0.32. ► The compositions within MPB region exhibit excellent piezoelectric properties. -- Abstract: (0.79 − x)Pb(In{sub 1/2}Nb{sub 1/2})O{sub 3}–0.21Pb(Zn{sub 1/3}Nb{sub 2/3})O{sub 3}–xPbTiO{sub 3} (x = 0.23–0.35) ternary ferroelectric system in the form of ceramics have been synthesized. Its structure and properties have been studied by X-ray powder diffraction and electric measurements. A morphotropic phase boundary region has been determined in the composition range of 0.28 < x < 0.32, where the Curie temperature T{sub C} and the rhombohedral–tetragonal phase transition temperature T{sub RT} were found to vary from 243 °C to 295 °C and 145 °C to 191 °C, respectively, much higher than PMNT and PZNT systems. The compositions within MPB region exhibit excellent piezoelectric properties such as piezoelectric coefficient d{sub 33} > 646 pC/N, T{sub RT} > 145 °C, T{sub C} > 273 °C and E{sub C} > 13 kV/cm for 0.5PIN–0.21PZN–0.29PT and 0.49PIN–0.21PZN–0.30PT, making the ceramics of this system a promising material for high power and high temperature application.

36 MATERIALS SCIENCE↗

Simple solvothermal synthesis of hydrophobic magnetic monodispersed Fe{sub 3}O{sub 4} nanoparticles

Graphical abstract: A facile method to produce monodispersed magnetite nanoparticles is based on the solvothermal reaction of iron acetylacetonate (Fe(acac)3) decomposition. The sizes ranged from 7 to 12 nm, which could be controlled by adjusting the volume ratio of oleylamine to n-hexane. Display Omitted Highlights: ► The solvethermal reaction of Fe(acac){sub 3} decomposition was carried out at mild temperature in the presence of oleylamine and n-hexane. ► The size of nanocrystals is controlled by adjusting the volume ratio of oleylamine to n-hexane. ► The low-boiling-point solvent n-hexane offered autogenous pressure parameter after gasified in the reaction temperature. ► The as prepared hydrophobic monodisperse Fe{sub 3}O{sub 4} NPs can be used to prepare the magnetic micelles for future biomedical applications. -- Abstract: A new solvothermal method is proposed for the preparation of Fe{sub 3}O{sub 4} nanoparticles (NPs) from iron acetylacetonate in the presence of oleylamine and n-hexane. The products are characterized by X-ray powder diffraction, infrared (IR) spectroscopy, transmission electron microscopy, thermogravimetry/differential thermogravimetry (TG/DTG) analysis, and vibrating sample magnetometery. The new procedure yields superparamagnetic monodispersed Fe{sub 3}O{sub 4} particles with sizes ranging from 7 nm to 12 nm. The nanocrystal sizes are controlled by adjusting the volume ratio of oleylamine to n-hexane. IR and TG/DTG analyses indicate that the oleylamine molecules, as stabilizers, are adsorbed on the surface of Fe{sub 3}O{sub 4} NPs as bilayer adsorption models. The surface adsorption quantities of oleylamine on 7.5 and 10.4 nm-diameter Fe{sub 3}O{sub 4} NPs are 18% and 11%, respectively. The hydrophobic surface of the obtained nanocrystals is passivated by adsorbed organic solvent molecules. These molecules provide stability against agglomeration, enable solubility in nonpolar solvents, and allow the formation of magnetic polymer micelles.

36 MATERIALS SCIENCE↗

Synthesis of WO{sub 3} nanoparticles by citric acid-assisted precipitation and evaluation of their photocatalytic properties

Graphical abstract: Display Omitted Highlights: ► WO{sub 3} nanoparticles were synthesized by a simple citric acid-assisted precipitation. ► WO{sub 3} photocatalyst was able to the partial mineralization of rhB, IC and MO. ► WO{sub 3} can be considered as a photocatalyst active under visible light irradiation. -- Abstract: WO{sub 3} nanoparticles were synthesized by citric acid-assisted precipitation method using a 1:1.5 molar ratio of ammonium paratungstate hydrate (H{sub 42}N{sub 10}O{sub 42}W{sub 12}·xH{sub 2}O):citric acid (C{sub 6}H{sub 8}O{sub 7}). The formation of monoclinic crystal structure of WO{sub 3} at different temperatures was confirmed by X-ray powder diffraction (XRD). The characterization of the samples synthesized was complemented by transmission electron microscopy (TEM), Brunauer–Emmitt–Teller surface area (BET) and diffuse reflectance spectroscopy (DRS). According to the thermal treatment followed during the synthesis of WO{sub 3}, the morphology of the nanoparticles formed was characterized by rectangular and ovoid shapes. The photocatalytic activity of WO{sub 3} obtained under different experimental conditions was evaluated in the degradation of rhodamine B (rhB), indigo carmine (IC), methyl orange (MO), and Congo red (CR) in aqueous solution under UV and UV–vis radiation. The highest photocatalytic activity was observed in the sample obtained by thermal treatment at 700 °C. In general, the sequence of degradation of the organic dyes was: indigo carmine (IC) > rhodamine B (rhB) > methyl orange (MO) > Congo red (CR). The mineralization degree of organic dyes by WO{sub 3} photocatalysts was determined by total organic carbon analysis (TOC) reaching percentages of mineralization of 82% (rhB), 85% (IC), 28% (MO), and 7% (CR) for 96 h of lamp irradiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sonochemical preparation of copper sulfides with different phases in aqueous solutions

Highlights: ► Sonochemical preparation of copper sulfides in aqueous solutions is reported. ► CuS and Cu{sub 2}S nanoparticles with crystallite sizes between 7 and 18 nm were obtained. ► Crystallite size can be changed using different complexing agents. ► Thermal behavior was studied by TG and XRD measurements. - Abstract: There is a growing interest in the synthesis of nanostructured copper sulfides due to their ability to form compounds with various stoichiometries. We report a sonochemical route for the preparation of copper sulfides with different compositions in aqueous solutions, using different, general and convenient copper sources such as copper acetate, copper hydroxide or basic copper carbonate and thiourea or thioacetamide as sulfur precursors under ambient air. Phase analysis, purity and morphology of the products were studied by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The results revealed that nanoparticles of covellite, CuS, with crystallite sizes between 7 and 18 nm can be obtained by using different precursors and complexing agents and that chalcocite, Cu{sub 2}S, can also be prepared sonochemically.

36 MATERIALS SCIENCE↗

Electric conductivity analysis and dielectric relaxation behavior of the hybrid polyvanadate (H{sub 3}N(CH{sub 2}){sub 3}NH{sub 3})[V{sub 4}O{sub 10}]

Highlights: ► Plate-like crystals (H{sub 3}N(CH{sub 2}){sub 3}NH{sub 3})[V{sub 4}O{sub 10}] were synthesized. ► Frequency and temperature dependence of AC conductivity indicate CBH model. ► The temperature dependence of DC conductivity exhibits two conduction mechanisms. - Abstract: Layered hybrid compound (H{sub 3}N(CH{sub 2}){sub 3}NH{sub 3})[V{sub 4}O{sub 10}] has been synthesized via hydrothermal method. Techniques X-ray powder diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and impedance spectroscopy have been used to characterize the hybrid material. Electrical and dielectric properties dependence on both temperature and frequency of the compound have been reported. The direct current conductivity process is thermally activated and it is found to be 12.67 × 10{sup −4} Ω{sup −1} m{sup −1} at 523 K. The spectra follow the Arrhenius law with two activation energy 0.25 eV for T < 455 K and 0.5 eV for T > 455 K.

36 MATERIALS SCIENCE↗

Fabrication of nano Delafossite LiCo{sub 0.5}Fe{sub 0.5}O{sub 2} as the new adsorbent in efficient removal of reactive blue 5 from aqueous solutions

Highlights: ► Fabrication of nano Delafossite LiCo{sub 0.5}Fe{sub 0.5}O{sub 2} by sol–gel method. ► Kinetic study of the adsorption properties. ► Removal of reactive blue 5 (RB5) as a reactive dye by the prepared new nanocatalyst. - Abstract: In this paper, nanoparticles of delafossite-type LiCo{sub 0.5}Fe{sub 0.5}O{sub 2} were prepared by sol–gel method in the presence of maleic acid as a chelating agent. The nanoparticles were characterized using differential thermal analysis, X-ray powder diffraction, Fourier infrared spectroscopy, transmission electron microscope, scanning electron microscopy and scanning tunneling microscopy. The nanoparticles showed the excellent adsorption properties towards reactive dye, reactive blue 5 (RB5). The adsorption studies were carried out at different pH values, various adsorbent dosages and contact time in a batch experiments. The kinetic studies indicate that the removal process obeys the second-order kinetic equation. Also, the isotherm evaluations reveal that the adsorption of RB5 by the nanoparticles follows the Freundlich model.

36 MATERIALS SCIENCE↗

Preparation of α-MnMoO{sub 4} at ultra-low temperature on an organic substrate

Highlights: ► A film of α-MnMoO{sub 4} nanorods was prepared on paper. ► The film was prepared by a solution reaction and subsequent dehydration at 220 °C. ► The average film thickness was approximately 60 μm. ► The relative permittivity of the prepared α-MnMoO{sub 4} film was 12 at 1 GHz. - Abstract: A crystalline film of α-MnMoO{sub 4} has been prepared at an ultra-low temperature of 220 °C on paper by a direct solution reaction and subsequent dehydration. First, MnMoO{sub 4}·0.9H{sub 2}O was prepared by immersing the substrate in an aqueous solution of MnCl{sub 2}, followed by spraying a determined area of the substrate with an aqueous solution of Na{sub 2}MoO{sub 4}. The ceramic film of MnMoO{sub 4}·0.9H{sub 2}O was then dehydrated at 220 °C to form a crystalline film of α-MnMoO{sub 4}. The crystal structure of the material was confirmed by X-ray powder diffraction and an average film thickness of 60 μm was measured using a profilometer. The permittivity of the film was also studied and showed a value of 12 at 1 GHz. Additionally, the low loss performance of a capacitance structure was obtained.

36 MATERIALS SCIENCE↗

Multifunctional Fe{sub 3}O{sub 4}@C@Ag hybrid nanoparticles: Aqueous solution preparation, characterization and photocatalytic activity

Highlights: ► Ag-loaded Fe{sub 3}O{sub 4}@C magnetic-optical bifunctional materials have been investigated. ► The magnetism was studied at the room temperature. ► The photocatalytic activity was evaluated under visible light irradiation. ► Ag-loaded Fe{sub 3}O{sub 4}@C nanocomposites show superior magnetism and photocatalytic activity. ► A simple synthetic process was discussed. - Abstract: The paper describes a kind of multifunctional Fe{sub 3}O{sub 4}@C@Ag hybrid nanoparticles, which can be successfully synthesized using a simple route based on directly adsorption and spontaneous reduction of silver ions onto the surface shell of carbon-coated magnetic nanoparticles. The as-prepared samples have been characterized by transmission electron microscopy (TEM), X-ray powder diffraction (XRD), Fourier transform infrared (FT-IR) spectrum, vibrating sample magnetometer (VSM) and UV–vis spectrum (UV–vis). The Ag nanocrystals loaded on the surface shell of carbon-coated magnetic nanoparticles are nearly spherical with an average diameter of 10 nm. And the carbonaceous polysaccharides shell obtained using an glucose hydrothermal reaction act as a role of a bridge between magnetic Fe{sub 3}O{sub 4} core and noble metallic Ag nanocrystals. The as-prepared samples can be used as an effective catalyst for the photodegradation of organic dyes (neutral red) under the exposure of visible light. Results show that the as-prepared samples have a degradation rate of 93.7% for dyes within 30 min, which indicates their high-efficiency and rapid photocatalytic activity.

36 MATERIALS SCIENCE↗

A carbon foam with a bimodal micro–mesoporous structure prepared from larch sawdust for the gas-phase toluene adsorption

Highlights: ► Network carbon foam containing a bimodal pore distribution was prepared from Larch. ► Liquefaction route was used for the preparation of morphology controllable carbon. ► Pore structure of carbon foam was controlled through KOH activation. - Abstract: A carbon foam with a bimodal micro–mesopore distribution, was prepared by submitting larch sawdust to liquefaction, resinification, foaming, carbonization and KOH activation. The morphology, pore texture and crystal microstructure was characterized by scanning and transmission electron microscopy, nitrogen adsorption analysis and X-ray powder diffraction. A honeycomb structure with adjacent cells was observed for the precursor of carbon foam. After KOH activation, the cell wall of precursor shrunk and broke. This lead to the formation of a well-connected 3D network and developed ligament pore structure (surface area of 554–1918 m{sup 2}/g) containing bimodal pores, 2.1 and 3.9 nm in diameter. The porous carbon foam prepared at 700 °C exhibited a much higher gas-phase toluene removal than commercial activated carbon fiber owing to the 3D network and bimodal pore structure.

36 MATERIALS SCIENCE↗

Influence of Fe doping on the structural, optical and acetone sensing properties of sprayed ZnO thin films

Graphical abstract: All the films are found to be polycrystalline ZnO possessing hexagonal wurtzite structure. The intensities of all the peaks are diminished strongly in the Fe-doped films, indicating their lower crystallinity as compared to the undoped ZnO film. The average crystallite size decreases from 35.21 nm (undoped sample) to 15.43 nm (1 at% Fe-doped sample). - Highlights: • Fe-doped ZnO films show smaller crystallinity with crystallite size: 15–26 nm. • Optical band gap in ZnO films decreases on Fe doping. • Fe-doped films exhibit the normal dispersion for the wavelength range 450–600 nm. • PL spectra of the Fe-doped films show quenching of the broad green-orange emission. • Acetone response of the Fe-doped films increases considerably at 300 °C. - Abstract: The ZnO thin films (undoped and Fe-doped) deposited by chemical spray pyrolysis technique have been analyzed by X-ray powder diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM). Results show that all the films possess hexagonal wurtzite structure of zinc oxide having crystallite sizes in the range 15–36 nm. On 1 at% Fe doping, the surface roughness of the film increases which favors the adsorption of atmospheric oxygen on the film surface and thereby increase in the gas response. Optical studies reveal that the band gap decreases due to creation of some defect energy states below the conduction band edge, arising out of the lattice disorder in the doped films. The refractive index of the films decreases on Fe doping and follows the Cauchy relation of normal dispersion. Among all the films examined, the 1 at% Fe-doped film exhibits the maximum response (∼72%) at 300 °C for 100 ppm concentration of acetone in air.

36 MATERIALS SCIENCE↗

Controlled synthesis of snowflake-like self-assemblies palladium nanostructures under microwave irradiation

Graphical abstract: - Highlights: • We demonstrated the synthesis of snowflake-like palladium nanostructures for the first time. • We discussed the influencing factors on the synthesis of snowflake-like Pd nanostructures. • The molar ratio of H{sub 2}Pd{sub 4} to PVP at 5 is the optimal selection. • The growth process was discussed. - Abstract: Self-assembly snowflake-like palladium nanostructures were synthesized under microwave irradiation using H{sub 2}PdCl{sub 4} as precursor, benzyl alcohol as both solvent and reducing agent, and PVP as stabilizer. The Pd snowflake-like nanostructures were formed and then characterized by transmission electron microscopy (TEM) and X-ray powder diffraction. The TEM images showed that the Pd nano-snowflakes were self-assemblies organized by hundreds of small spherical nanoparticles. Pd snowflake-like nanostructures with well-defined shape and uniform size can be obtained by tuning the concentration of palladium precursor, the molar ratio of H{sub 2}PdCl{sub 4}/PVP, as well as the heating time by microwave irradiation. The possible growing process of the snowflake-like Pd structures was also proposed on the basis of investigating the properties of as-synthesized Pd nanostructures under different conditions.

36 MATERIALS SCIENCE↗

One-step hydrothermal synthesis and characterization of V–Cr–O nanospheres and their excellent performance in the ammoxidation of 3,4- and 2,6-DCT

Graphical abstract: - Highlights: • V–Cr–O composite was synthesized by a facile one pot hydrothermal route. • The V–Cr–O composite has sphere-like morphology. • The as-obtained V–Cr–O composite has large specific surface area: 117 m{sup 2} g{sup −1}. • V–Cr–O complex was explored as the catalyst for the ammoxidation. - Abstract: Sphere-like V–Cr–O catalyst was successfully synthesized using V{sub 2}O{sub 5}, CrO{sub 3} and H{sub 2}C{sub 2}O{sub 4} solution as the starting materials by a facile one pot hydrothermal approach for the first time. The as-obtained samples were characterized by X-ray powder diffraction, X-ray photoelectron spectroscopy, energy dispersive X-ray spectrometer, hydrogen temperature programmed reduction, scanning electron microscopy and Brunauer–Emmett–Teller. The results indicated that V–Cr–O spheres with the diameter about 4 μm, consisted of lots of nanoparticles, were formed. The as-obtained V–Cr–O catalyst had large specific surface area: 117 m{sup 2} g{sup −1}. Furthermore, V–Cr–O complex was explored as the unsupported catalyst for the synthesis of 3,4- and 2,6-dichlorobenzonitrile by the ammoxidation of 3,4- and 2,6-dichlorotoluene. It was found that it had excellent performance in the ammoxidation reactions, specially, the catalytic temperature was decreased to about 320 °C, which was much lower than the previous reports (380–420 °C)

36 MATERIALS SCIENCE↗