Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum dot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

PbTe and SnTe quantum dot precipitates in a CdTe matrix fabricated by ion implantation

We present rock-salt IV-VI semiconductor quantum dots fabricated by implantation of Pb{sup +}, Te{sup +}, or Sn{sup +} ions into epitaxial zinc-blende CdTe layers. PbTe and SnTe nanoprecipitates of high structural quality are formed after implantation by thermal annealing due to the immiscibility of dot and matrix materials. For samples implanted only with Pb{sup +}, intense continuous-wave photoluminescence peaked at 1.6 mum at 300 K is found. In contrast, for PbTe quantum dots fabricated by coimplantation of Pb{sup +} and Te{sup +}, the 300 K emission peak is observed at 2.9 mum, indicating luminescence from much larger dots.

36 MATERIALS SCIENCE↗

Atomic structure and stoichiometry of In(Ga)As/GaAs quantum dots grown on an exact-oriented GaP/Si(001) substrate

The atomic structure and stoichiometry of InAs/InGaAs quantum-dot-in-a-well structures grown on exactly oriented GaP/Si(001) are revealed by cross-sectional scanning tunneling microscopy. An averaged lateral size of 20 nm, heights up to 8 nm, and an In concentration of up to 100% are determined, being quite similar compared with the well-known quantum dots grown on GaAs substrates. Photoluminescence spectra taken from nanostructures of side-by-side grown samples on GaP/Si(001) and GaAs(001) show slightly blue shifted ground-state emission wavelength for growth on GaP/Si(001) with an even higher peak intensity compared with those on GaAs(001). This demonstrates the high potential of GaP/Si(001) templates for integration of III-V optoelectronic components into silicon-based technology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Temperature-dependent energy band gap variation in self-organized InAs quantum dots

We investigated the temperature-dependent variation of the photoluminescence emission energy of self-organized InAs/GaAs quantum dots (QDs) grown by conventional Stranski-Krastanov (SK) molecular beam epitaxy and migration-enhanced molecular beam epitaxy (MEMBE) and that of MEMBE InAs QDs in a symmetric and an asymmetric In{sub 0.2}Ga{sub 0.8}As/GaAs well. The temperature-dependent energy variation of each QD is analyzed in low and high temperature regions, including a sigmoidal behavior of conventional SK quantum dots with the well-known Varshni and semi-empirical Fan models.

36 MATERIALS SCIENCE↗

Pulsed laser deposition of Mn doped CdSe quantum dots for improved solar cell performance

In this work, we demonstrate (1) a facile method to prepare Mn doped CdSe quantum dots (QDs) on Zn{sub 2}SnO{sub 4} photoanodes by pulsed laser deposition and (2) improved device performance of quantum dot sensitized solar cells of the Mn doped QDs (CdSe:Mn) compared to the undoped QDs (CdSe). The band diagram of photoanode Zn{sub 2}SnO{sub 4} and sensitizer CdSe:Mn QD is proposed based on the incident-photon-to-electron conversion efficiency (IPCE) data. Mn-modified band structure leads to absorption at longer wavelengths than the undoped CdSe QDs, which is due to the exchange splitting of the CdSe:Mn conduction band by the Mn dopant. Three-fold increase in the IPCE efficiency has also been observed for the Mn doped samples.

36 MATERIALS SCIENCE↗

Plasmon-enhanced terahertz emission in self-assembled quantum dots by femtosecond pulses

A scheme for terahertz (THz) generation from intraband transition in a self-assembled quantum dot (QD) molecule coupled to a metallic nanoparticle (MNP) is analyzed. The QD structure is described as a three-level atom-like system using the density matrix formalism. The MNP with spherical geometry is considered in the quasistatic approximation. A femtosecond laser pulse creates a coherent superposition of two subbands in the quantum dots and produces localized surface plasmons in the nanoparticle which act back upon the QD molecule via dipole-dipole interaction. As a result, coherent THz radiation with a frequency corresponding to the interlevel spacing can be obtained, which is strongly modified by the presence of the MNP. The peak value of the terahertz signal is analyzed as a function of nanoparticle's size, the MNP to QD distance, and the area of the applied laser field. In addition, we theoretically demonstrate that the terahertz pulse generation can be effectively controlled by making use of a train of femtosecond laser pulses. We show that by a proper choice of the parameters characterizing the pulse train a huge enhancement of the terahertz signal is obtained.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electron Transfer Kinetics at Graphene Quantum Dot Assembly Electrodes

Electrochemical performance of nanostructured carbon electrodes was evaluated using cyclic voltammetry and a simple simulation model. The electrodes were prepared from soluble precursors by anodic electrodeposition of two sizes of graphene quantum dot assemblies (hexabenzocoronene (HBC) and carbon quantum dot (CQD)) onto a conductive support. Experimental and simulated voltammograms enabled the extraction of the following electrode parameters: conductivity of the electrodes (a combination of ionic and electronic contributions), density of available electrode states at different potentials, and tunneling rate constant (Marcus Gerischer model) for interfacial charge transfer to ferrocene/ferrocenium (Fc/Fc + ) couple. The parameters indicate that HBC and CQD have significant density of electronic states at potentials more positive than -0.5 V versus Ag/Ag + Enabled by these large densities, the electron transfer rates at the Fc/Fc + thermodynamic potential are several orders of magnitude slower than those commonly observed on other carbon electrodes. This study is expected to accelerate the discovery of improved synthetic carbon electrodes by providing fast screening methodology of their electrochemical behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Excitonic Aharonov-Bohm effect in isotopically pure {sup 70}Ge/Si self-assembled type-II quantum dots

We report on a magnetophotoluminescence study of isotopically pure {sup 70}Ge/Si self-assembled type-II quantum dots. Oscillatory behaviors attributed to the Aharonov-Bohm effect are simultaneously observed for the emission energy and intensity of excitons subject to an increasing magnetic field. When the magnetic flux penetrates through the ringlike trajectory of an electron moving around each quantum dot, the ground state of an exciton experiences a change in its angular momentum. Our results provide the experimental evidence for the phase coherence of localized electron wave functions in group-IV Ge/Si self-assembled quantum structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical properties of fluorescent zigzag graphene quantum dots derived from multi-walled carbon nanotubes

Graphene quantum dots (GQDs), which are edge-bound nanometer-size graphene pieces, have fascinating electronic and optical properties due to their quantum confinement and edge effect. In this paper, GQDs were synthesized by using acid treatment and chemical exfoliation of multi-walled carbon nanotubes (MWCNTs). The structure of the GQDs was investigated by transmission electron microscope. The GQDs have a uniform size distribution, zigzag edge structure and two-dimensional morphology. The results indicated that the GQDs have bright blue emission upon UV excitation. The highly fluorescent GQDs exhibited high water solubility and good stability. It is shown that the acid treatment of MWCNTs leads to the formation of the functional group in zigzag sites, which results in the pH-dependent fluorescence of the GQDs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study on the Interaction of the CpG Alternating DNA with CdTe Quantum Dots

A novel sensitive method for detection of DNA methylation was developed with thioglycollic acid (TGA)-capped CdTe quantum dots (QDs) as fluorescence probes. Recognition of methylated DNA sites would be useful strategy due to the important roles of methylation in disease occurrence and developmental processes. DNA methylation occurs most often at cytosine-guanine sites (CpG dinucleotides) of gene promoters. The QDs significantly interacted with hybridized unmethylated and methylated DNA. The interaction of CpG rich methylated and unmethylated DNA hybrid with quantum dots as an optical probe has been investigated by fluorescence spectroscopy and electrophoresis assay. The fluorescence intensity of QDs was highly dependent to unmethylated and methylated DNA. Specific site of CpG islands of Adenomatous polyposis coli (APC), a well-studied tumor suppressor gene, was used as the detection target. Under optimum conditions, upon the addition of unmethylated dsDNA, the fluorescence intensity increased in linear range from 1.0 × 10{sup − 10} to 1.0 × 10{sup − 6}M with detection limit of 6.2 × 10{sup − 11} M and on the other hand, the intensity of QDs showed no changes with addition of methylated dsDNA. We also demonstrated that the unmethylated and methylated DNA and QDs complexes showed different mobility in electrophoresis assay. This easy and reliable method could distinguish between methylated and unmethylated DNA sequences.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Technoeconomic Model Suggests Scaling-Up Perovskite Quantum Dots for Optoelectronics Warrants Improved Synthesis Yield, Solvent Recycling, and Automation

A comprehensive technoeconomic cost-analysis of perovskite quantum dot optoelectronics is reported. Using economies-of-scale considerations based on price data from prominent materials suppliers, higher QD synthesis yield, solvent recycling, and synthesis automation are shown to be critical for market-entry of this technology. Combinedly, this three-pronged approach drives quantum dot film fabrication costs down from >$50/m 2 to ~$2-3/m 2 .

14 SOLAR ENERGY↗

Study of alloy disorder in quantum dots through multi-million atom simulations

A tight binding model which includes s, p, d, s orbitals is used to examine the electronic structures of an ensemble of dome-shaped In0.6 Ga0.4 As quantum dots. Given ensembles of identically sized quantum dots, variations in composition and configuration yield a linewidth broadening of less than 0.35 meV, much smaller than the total broadening determined from photoluminescence experiments. It is also found that the computed disorder-induced broadening is very sensitive to the applied boundary conditions, so that care must be taken to ensure proper convergence of the numerical results. Examination of local eigenenergies as functions of position shows similar convergence problems and indicates that an inaccurate resolution of the equilibrium atomic positions due to truncation of the simulation domain may be the source of the slow ground state convergence.

disorder↗

Dynamics of nuclear polarization in InGaAs quantum dots in a transverse magnetic field

The time-resolved Hanle effect is examined for negatively charged InGaAs/GaAs quantum dots. Experimental data are analyzed by using an original approach to separate behavior of the longitudinal and transverse components of nuclear polarization. This made it possible to determine the rise and decay times of each component of nuclear polarization and their dependence on transverse magnetic field strength. The rise and decay times of the longitudinal component of nuclear polarization (parallel to the applied field) were found to be almost equal (approximately 5 ms). An analysis of the transverse component of nuclear polarization shows that the corresponding rise and decay times differ widely and strongly depend on magnetic field strength, increasing from a few to tens of milliseconds with an applied field between 20 and 100 mT. Current phenomenological models fail to explain the observed behavior of nuclear polarization. To find an explanation, an adequate theory of spin dynamics should be developed for the nuclear spin system of a quantum dot under conditions of strong quadrupole splitting.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Two-path transport measurements with bias dependence on a triple quantum dot

We present transport measurements on a lateral triple quantum dot with a star-like geometry and one lead attached to each dot. The system is studied in a regime close to established quadruple points, where all three dots are in resonance. The specific sample structure allows us to apply two different bias voltages to the two source leads and thus to study the influence between the paths with serial double dots.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A quantum dot asymmetric self-gated nanowire FET for high sensitive detection

We present a novel device for weak light detection based on self-gated nanowire field effect structure with embedded quantum dots beside the nanowire current channel. The quantum dot with high localization energy will make the device work at high detecting temperature and the nano-channel structure will provide high photocurrent gain. Simulation has been done to optimize the structure, explain the working principle and electrical properties of the devices. The nonlinear current-voltage characteristics have been demonstrated at different temperatures. The responsivity of the device is proven to be more than 4.8 × 10{sup 6}A/W at 50 K.

36 MATERIALS SCIENCE↗

Molecular and Structural Probes of Defect States in Quantum Dots for Photoconversion

The objective of this research on quantum confined nanocrystals is to develop a fundamental understanding of the chemical properties of ligand-nanocrystal interfaces that will enable the control of defect-driven charge recombination in these systems. With this control, quantum confined nanocrystals may represent a cost effective means of absorbing light over the full solar spectrum for the production of electricity and fuels from sunlight. New spectroscopic techniques will be developed in this project that allow a direct correlation of molecular structural information about the ligand-nanocrystal interactions with the corresponding density and energetic distribution of surface defects and the influence that these defects have on charge transport and recombination. The insight that is gained will provide a molecular basis for the rational development of novel pathways for the of use quantum dots in systems for solar energy transduction.

14 SOLAR ENERGY↗

Compositionally Graded Alloy Quantum Dot Phosphors for Solid State Lighting. Final Report

To push the boundaries of efficiency and cost in solid state lighting (SSL), narrow band red emitting down conversion phosphors must be improved. These materials are critical to both the color rendering ability and optical output of phosphor converted light emitting diodes (LEDs). Improvements in these performance parameters will have a significant impact on the adoption of SSL in retail, office, and home lighting applications. Quantum Dots (QDs) are widely acknowledged as a cost-effective front-runner among developing downconverting technologies because they emit narrow band luminescence that is tunable across the visible spectrum. Current syntheses of quantum dots, however, utilize expensive and toxic reagents and often involve several time-intensive purification steps. To address this, we have introduced a novel, cost-effective synthetic scheme, whereby the final quantum dot structures can be accessed with fewer synthetic steps using a library of inexpensive, easily-synthesized precursors. With the help of automated high throughput synthesis robotics, Columbia, LBNL, and OSRAM have optimized red and amber CdS/CdSe/CdS QD architectures for SSL. QDs with improved shelling layers have been identified that meet the industry state of the art performance on chip under high humidity accelerated aging tests. This is remarkable considering the time frame of this project compared to the time and resources allocated for the development of the industrial standard. Furthermore, although particle stability to optical charging is often stressed in improving QLED performance, we have identified effective ZnS particle over-coating as the most important factor determining particle survivability and device performance in down-converting LEDs.

36 MATERIALS SCIENCE↗

Photovoltaic performance of Ag-doped CdS quantum dots for solar cell application

Graphical abstract: Photovoltaic performance of un-doped and Ag-doped CdS quantum dots were studied. The enhancement in photovoltaic performance might be due to the increase in carrier concentration and additional energy level creation due to Ag doping in FTO/TiO{sub 2}/Ag-doped CdS QDs solar cell. - Highlights: • Un-doped and Ag-doped CdS QDs were successfully deposited on TiO{sub 2}/FTO. • Optical response was found to be high for 3% Ag-doped CdS QDs. • The absorption edge for the 3% Ag-doped CdS was found to be 550 nm. • The highest power conversion efficiency was 1.25% for 3% Ag-doped CdS QDs. - Abstract: Un-doped and Ag-doped CdS quantum dots (QDs) were deposited on spin coated TiO{sub 2} photoanode material by Successive Ionic Layer Adsorption and Reaction (SILAR) method. Systematic investigations were carried out in the deposited un-doped and Ag-doped CdS QDs using powder X-ray diffraction (PXRD), field emission scanning electron microscopy (FESEM) and UV–vis-NIR spectrum. Finally, the FTO/TiO{sub 2}/un-doped CdS and FTO/TiO{sub 2}/Ag-doped CdS QDs were successfully assembled to study the photovoltaic performance under standard one sun illumination of AM 1.5, 100 mW/cm{sup 2}. Photovoltaic parameters, such as short-circuit photocurrent density, open circuit voltage, fill factor and conversion efficiency were found to be 1.37 mA/cm{sup 2}, 0.72 V, 61.5% and 0.61% respectively, for un-doped CdS. Ag-doped CdS QDs shows enhanced photovoltaic parameters such as short-circuit photocurrent density, open circuit voltage, fill factor and conversion efficiency which were 2.35 mA cm{sup 2}, 0.74 V, 71.8% and 1.25% respectively.

36 MATERIALS SCIENCE↗

Quantum Dot Sensitized Solar Cells Based on Ternary Metal Oxide Nanowires

In Phase I of this project we investigate quantum dot sensitized solar cells (QDSSCs) based on ternary metal oxide nanowires and study the physical and chemical mechanisms that govern device operation. Our research has the following five objectives: (1) synthesis of ternary metal oxide nanowires, (2) synthesis of QDs and exploration of non-solution based QD deposition methods, (3) physical and electro-optical characterizations of fabricated solar devices, (4) device modeling and first-principle theoretical study of transport physics, and (5) investigation of long-term stability issues of QD sensitized solar cells. In Phase II of this project our first major research goal is to investigate magnetically doped quantum dots and related spin polarization effect, which could improve light absorption and suppress electron relaxation in the QDs. We will utilize both physical and chemical methods to synthesize these doped QDs. We will also study magnetically modified nanowires and introduce spin-polarized transport into QDSSCs, and inspect its impact on forward electron injection and back electron transfer processes. Our second goal is to study novel solid-state electrolytes for QDSSCs. Specifically, we will inspect a new type of polymer electrolytes based on a modified polysulfide redox couple, and examine the effect of their electrical properties on QDSSC performance. These solid-state electrolytes could also be used as filler materials for in situ sample fracturing in STM and enable cross-sectional interface examination of QD/nanowire structures. Our third research goal is to examine the interfacial properties such as energy level alignment at QD/nanowire interfaces using the newly developed Cross-sectional Scanning Tunneling Microscopy and Spectroscopy technique for non-cleavable materials. This technique allows a direct probing of band structures and alignment at device interfaces, which could generate important insight into the mechanisms that govern QDSSC operation. These investigations will be carried out through a close collaboration between our experimental and theoretical efforts in this project. This project initiates an important research direction in the jurisdiction of Wyoming. It brings together researchers from different academic disciplines including physics, chemistry, materials science, and engineering to work on one common scientific theme, and is a vital step towards the establishment of an nationally competitive research program in energy-related nanomaterials in the state of Wyoming.

14 SOLAR ENERGY↗