Search NASA⌕ Search

SEARCH · Search NASA

Results for “software”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Planning and organization of an e-learning training program on the analysis software in CMS

Analyzing physics data at LHC experiments is a complicated task involving multiple steps, sharing of expertise, cross checks and comparing different analyses. To maximize physics productivity, the CMS experiment at LHC has developed a collection of analysis tools called the PAT (Physics Analysis Toolkit). A comprehensive training program was designed and setup on using PAT software as an integral key part of the analysis of data from the CMS experiment. This note summarizes the requirements and the considerations that led to establish the PAT training program, the approach taken, the main organizational issues and the experience on its implementation and maintenance. The training and the feedback has proved to be very successful both for participants and the PAT development team.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Offline Software for the Mu2e Experiment

The Mu2e experiment at Fermilab is in the midst of its R&D and approval processes. To aid and inform this process, a small team has developed an end-to-end Geant4-based simulation package and has developed reconstruction code that is already at the stage of an advanced prototype. Having these tools available at an early stage allows design options and tradeoffs to be studied using high level physics quantities. A key to the success of this effort has been, as much as possible, to acquire software and customize it, rather than to build it in-house.

Kutschke, Robert K.↗

Software Trigger Algorithms to Search for Magnetic Monopoles with the NO$\nu$A Far Detector

The NOvA far detector, due to its surface proximity, large size, good timing resolution, large energy dynamic range, and continuous readout, is sensitive to the detection of magnetic monopoles over a large range of velocities and masses. In order to record candidate magnetic monopole events with high efficiency we have designed a software-based trigger to make decisions based on the data recorded by the detector. The decisions must be fast, have high efficiency, and a large rejection factor for the over 100,000 cosmic rays that course through the detector every second. In this paper we briefly describe the simulation of magnetic monopoles, including the detector response, and then discuss the algorithms applied to identify magnetic monopole candidates. We also present the results of trigger efficiency and purity tests using simulated samples of magnetic monopoles with overlaid cosmic backgrounds and electronic noise.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

OSiRIS: a distributed Ceph deployment using software defined networking for multi-institutional research

We report on the first year of the OSiRIS project (NSF Award #1541335, UM, IU, MSU and WSU) which is targeting the creation of a distributed Ceph storage infrastructure coupled together with software-defined networking to provide high-performance access for wellconnected locations on any participating campus. The projects goal is to provide a single scalable, distributed storage infrastructure that allows researchers at each campus to read, write, manage and share data directly from their own computing locations. The NSF CC*DNI DIBBS program which funded OSiRIS is seeking solutions to the challenges of multi-institutional collaborations involving large amounts of data and we are exploring the creative use of Ceph and networking to address those challenges. While OSiRIS will eventually be serving a broad range of science domains, its first adopter will be the LHC ATLAS detector project via the ATLAS Great Lakes Tier-2 (AGLT2) jointly located at the University of Michigan and Michigan State University. Part of our presentation will cover how ATLAS is using the OSiRIS infrastructure and our experiences integrating our first user community. The presentation will also review the motivations for and goals of the project, the technical details of the OSiRIS infrastructure, the challenges in providing such an infrastructure, and the technical choices made to address those challenges. We will conclude with our plans for the remaining 4 years of the project and our vision for what we hope to deliver by the projects end.

97 MATHEMATICS AND COMPUTING↗

LIQUID: an-open source software for identifying lipids in LC-MS/MS-based lipidomics data

We introduce an open-source software, LIQUID, for semi-automated processing and visualization of LC-MS/MS based lipidomics data. LIQUID provides users with the capability to process high throughput data and contains a customizable target library and scoring model per project needs. The graphical user interface provides visualization of multiple lines of spectral evidence for each lipid identification, allowing rapid examination of data for making confident identifications of lipid molecular species.

Environmental Molecular Sciences Laboratory↗

High-Fidelity Software-Defined Quantum Logic on a Superconducting Qudit

We present an efficient approach to achieving arbitrary, high-fidelity control of a multilevel quantum system using optimal control techniques. As an demonstration, we implement a continuous, software-defined microwave pulse to realize a 0 ↔ 2 SWAP gate that achieves an average gate fidelity of 99.4%. We describe our procedure for extracting the system Hamiltonian, calibrating the quantum and classical hardware chain, and evaluating the gate fidelity. Our work represents an alternative, fully generalizable route towards achieving universal quantum control by leveraging optimal control techniques.

Superconducting qubits↗

Recent advances in the CRANK software suite for experimental phasing

Recent developments in the CRANK software suite for experimental phasing have led to many more structures being built automatically. For its first release in 2004, CRANK was shown to effectively detect and phase anomalous scatterers from single-wavelength anomalous diffraction data. Since then, CRANK has been significantly improved and many more structures can be built automatically with single- or multiple-wavelength anomalous diffraction or single isomorphous replacement with anomalous scattering data. Here, the new algorithms that have been developed that have led to these substantial improvements are discussed and CRANK’s performance on over 100 real data sets is shown. The latest version of CRANK is freely available for download at http://www.bfsc.leidenuniv.nl/software/crank/ and from CCP4 (http://www.ccp4.ac.uk/)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

XDesign : An open-source software package for designing X-ray imaging phantoms and experiments

Here, the development of new methods or utilization of current X-ray computed tomography methods is impeded by the substantial amount of expertise required to design an X-ray computed tomography experiment from beginning to end. In an attempt to make material models, data acquisition schemes and reconstruction algorithms more accessible to researchers lacking expertise in some of these areas, a software package is described here which can generate complex simulated phantoms and quantitatively evaluate new or existing data acquisition schemes and image reconstruction algorithms for targeted applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Adaptive QoS for Data Transfers using Software-Defined Networking

Software-defined networking (SDN) has demonstrated tremendous potential for altering the networking landscape in both academia andindustry. While traffic engineering as network intelligence in classic technologies have received considerable attention from the researchcommunity, traffic engineering in the SDN space, particularly in regards to quality of service (QoS), remains relatively unexplored.While recent efforts have begun to show how SDN might be leverage to meet the complex traffic-shaping needs of modern networks, there is still much that can be done to illustrate its potential, and in particular how it could prevent degradation of service for all QoStraffic. We propose methods to allow other flows to use bandwidth unused by high-priority transfers, while ensuring that bandwidthassigned to those high-priority transfers is available when needed. We present fine-tuned control over bandwidth allocation that achieves an efficient combination of both the differentiated service (DiffServ)-style classification and the integrated service (IntServ)-style perflowconsiderations. We also show how this method may be used over a wide area network (WAN) to optimally adjust bandwidth allocations when high-priority data transfers are not using their allocated bandwidth.

Boley, Josh↗

Grid-Forming Control Using TAPAS Software Defined Inverters

Here, this paper discusses the design and hardware implementation aspects of state-feedback primary control for grid forming inverters. The primary control consists of two tracking control laws: voltage tracking and frequency/angle tracking. The voltage tracking control requires voltage and current at the inverter's switch terminal (i.e. before the filter). The fundamental component of switch terminal voltage is estimated using the inverter's average model while the switch terminal current is estimated using an observer, thus obviating the need for sensors at the switch terminals. The measurements of frequency and angle(s) needed for frequency/angle tracking are noisy due to measurement noises and inherent delays in the phase locked loop (PLL). Conditioning of these feedback signals is discussed in detail, and the corresponding changes in the control design are provided to better attenuate the impact of noises. Effectiveness of the proposed design and implementation is demonstrated by the implementation results from TAPAS software defined inverter (SDI).

24 POWER TRANSMISSION AND DISTRIBUTION↗

Residential (Secondary-Use) Energy Storage System with Modular Software and Hardware Power Electronic Interfaces

Secondary-use energy storage systems (ESS) are a potential low-cost energy storage system for the electric grid. These systems propose a low-cost solution to the challenge, what to do with electric vehicle batteries once EV end-of-life has been reached. However, the development of an ESS is complex by nature. Typically, the bidirectional power electronics conversion (PEC) system has hardware which includes power stages, auxiliary circuits, protection circuits, and the control interfaces all embedded and integrated as a system. This leads to interoperability challenges and vendor dependencies that increase balance of system costs. This paper proposes a modular approach of software and hardware interfaces to reduce the costs of an ESS.

Starke, Michael↗

An Algorithmic and Software Pipeline for Very Large Scale Scientific Data Compression with Error Guarantees

Efficient data compression is becoming increasingly critical for storing scientific data because many scientific applications produce vast amounts of data. This paper presents an end-to-end algorithmic and software pipeline for data compression that guarantees both error bounds on primary data (PD) and derived data, known as Quantities of Interest (QoI).We demonstrate the effectiveness of the pipeline by compressing fusion data generated by a large-scale fusion code, XGC, which produces tens of petabytes of data in a single day. We demonstrate that the compression is conducted by setting aside computational resources known as staging nodes, and does not impact the simulation performance. For efficient parallel I/O, the pipeline uses ADIOS2, which many codes such as XGC already use for their parallel I/O. We show that our approach can compress the data by two orders of magnitude while guaranteeing high accuracy on both the PD and the QoIs. Further, the amount of resources required by compression is a few percent of the resources required by simulation while ensuring that the compression time for each stage is less than the corresponding simulation time.This pipeline consists of three main steps. The first step decomposes the data using domain decomposition into small subdomains. Each subdomain is then compressed independently to achieve a high level of parallelism. The second step uses existing techniques that guarantee error bounds on the primary data for each subdomain. The third step uses a post-processing optimization technique based on Lagrange multipliers to reduce the QoI errors for data corresponding to each subdomain. The Lagrange multipliers generated can be further quantized or truncated to increase the compression level. All of the above characteristics of our approach make it highly practical to apply on-the-fly compression while guaranteeing errors on QoIs that are critical to the scientists.

Banerjee, Tania↗

Blockchain-Enabled Secure Device-to-Device Communication in Software-Defined Networking

The Internet of Things (IoT) continues to increase the demand for seamless communication among IoT devices. The rapid growth of IoT devices has led to an exponential increase in device-to-device (D2D) communication within the Software-Defined Networking (SDN), though it enables a flexible archi-tecture for managing network resources. However, traditional security models face challenges (e.g., Security, privacy, and trust) in addressing the dynamic and decentralized nature of these communications. Despite of these challenges, this paper proposes a novel approach that leverages blockchain technology to enhance the security, privacy, and trustworthiness of D2D communication within an SDN environment. The proposed approach integrates blockchain nodes in sDN components to establish a decentralized ledger for transparent and verifiable records. Smart contracts enforce authentication rules to ensure that only authenticated devices can access the network and engage in transactions securely. It also automates the security policies to ensure temper resistance execution using the cryptographic mechanism for data integrity and authentic communication. The Implementation of the proposed algorithms validates the resilience of the proposed approach against cyberattacks. Overall, the proposed approach enables efficient and secure D2D communication for resilient SDN infrastructure in IoT ecosystems.

Das, Debashis↗

A Software Framework for Comparing Training Approaches for Spiking Neuromorphic Systems

There are a wide variety of training approaches for spiking neural networks for neuromorphic deployment. However, it is often not clear how these training algorithms perform or compare when applied across multiple neuromorphic hardware platforms and multiple datasets. In this work, we present a software framework for comparing performance across four neuromorphic training algorithms across three neuromorphic simulators and four simple classification tasks. We introduce an approach for training a spiking neural network using a decision tree, and we compare this approach to training algorithms based on evolutionary algorithms, back-propagation, and reservoir computing. We present a hyperparameter optimization approach to tune the hyperparameters of the algorithm, and show that these optimized hyperparameters depend on the processor, algorithm, and classification task. Finally, we compare the performance of the optimized algorithms across multiple metrics, including accuracy, training time, and resulting network size, and we show that there is not one best training algorithm across all datasets and performance metrics.

Schuman, Catherine↗

VAC: A Software Approach to Resilient SCADA Automation

To better secure critical infrastructure, especially power systems, this paper introduces a virtual SCADA automation controller. The automation controller is a gateway into a power subsystem, making it a valuable target for cyber-attacks that could cut it off from the control center and cause a loss of view and control. To prevent this, the Virtual Automation Controller (VAC) is a backup device that mirrors the capabilities of the physical controller. It can communicate via Modbus and DNP3 and is containerized so it can be deployed on a variety of platforms. Furthermore, it utilizes software-defined networking to quickly disconnect a failed automation controller and preserve its state for forensics. The VAC gives system operators time to replace the failed controller and prevents dangerous and costly damage to power systems. The VAC is compared against the SEL 3505-3 RTAC and shown to have the necessary features to act as a failover controller.

Johnson, Jordan↗

The Evolution of the Pegasus Workflow Management Software

Since 2001 the Pegasus Workflow Management System has evolved into a robust and scalable system that automates the execution of a number of complex applications running on a variety of heterogeneous, distributed high-throughput, and high-performance computing environments. Pegasus was built on the principle of separation between the workflow description and workflow execution, providing the ability to port and adapt the workflow based on the target execution environment. Through its user-driven research and development it has adapted to the needs of a number of scientific communities, utilizing and developing novel algorithms and software engineering solutions. This paper describes the evolution of Pegasus over time and provides motivations behind the design decisions. The paper concludes with selected lessons learned.

97 MATHEMATICS AND COMPUTING↗

Research Software Engineering at Oak Ridge National Laboratory

Research software engineers (RSE) play a vital role in scientific discoveries worldwide. They lead the core development of the applications, libraries, and tools that enable today’s supercomputers to process the vast volumes of data generated from the world’s most extensive and complicated scientific instruments and facilities. This article describes the mission, culture, and practices of RSE teams at Oak Ridge National Laboratory (ORNL), including their team dynamics and composition, work ethics, standard practices, and ever-evolving skill sets vital to pursuing scientific innovations and implementing novel ideas. We describe the lessons learned from specific activities that contribute to shaping the identity and growth of RSE roles at ORNL. Lastly, we provide our view for the near future on effective strategies for establishing, leading, and nurturing RSE teams and building a thriving community in collaboration with science stakeholders.

42 ENGINEERING↗