Search NASA⌕ Search

SEARCH · Search NASA

Results for “solids flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Growth of turbulent boundary layers over nonstationary boundaries

Wind tunnel data are presented which show that the velocity distribution in a turbulent boundary layer above a moving ground plane can be represented as a power law. The flows under consideration are encountered in studies of shock waves near solid boundaries and of the near-field drag of tube vehicles. The two wind tunnels used in the experiment were equipped with moving ground belts and employed porous suction plates to remove the normal tunnel boundary layer. The layers studied are, therefore, assumed to originate at the leading edge of the belt.

Roper, A. T.↗
NASA NTRS1976

Hollow lunar spherules and microcratering

Craters were generated by micrometer-size, thin-walled hollow glass spheres impacting glass and stainless steel targets to determine morphological features distinguishing craters formed by hollow spheres from those formed by solid projectiles. The craters formed in both targets differed from those formed by solid spherical projectiles in that the central pit is an annular rather than a cup-shaped depression. The existence of an annular crater morphology on a surface exposed to cosmic dust would indicate the presence of thin-walled hollow spherules. Penetrations of thin-walled hollow glass beads by high velocity, solid, micrometer-size spheres are characterized by inward and outward flowing lips showing asymmetries dependent on the angle of impact.

Vedder, J. F.↗
NASA NTRS1977

Rocketdyne's advanced coal slurry pumping program

The Rocketdyne Division of Rockwell International Corporation is conducting a program for the engineering, fabrication, and testing of an experimental/prototype high-capacity, high-pressure centrifugal slurry feed pump for coal liquefaction purposes. The abrasion problems in a centrifugal slurry pump are primarily due to the manner in which the hard, solid particles contained in the slurry are transported through the hydraulic flow passages within the pump. The abrasive particles can create scraping, grinding, cutting, and sandblasting effects on the various exposed parts of the pump. These critical areas involving abrasion and impact erosion wear problems in a centrifugal pump are being addressed by Rocketdyne. The mechanisms of abrasion and erosion are being studied through hydrodynamic analysis, materials evaluation, and advanced design concepts.

Davis, D. E.↗
NASA NTRS1981

Exact finite elements for conduction and convection

An approach for developing exact one dimensional conduction-convection finite elements is presented. Exact interpolation functions are derived based on solutions to the governing differential equations by employing a nodeless parameter. Exact interpolation functions are presented for combined heat transfer in several solids of different shapes, and for combined heat transfer in a flow passage. Numerical results demonstrate that exact one dimensional elements offer advantages over elements based on approximate interpolation functions.

Thornton, E. A.↗
NASA NTRS1981

Exact finite elements for conduction and convection

An appproach for developing exact one dimensional conduction-convection finite elements is presented. Exact interpolation functions are derived based on solutions to the governing differential equations by employing a nodeless parameter. Exact interpolation functions are presented for combined heat transfer in several solids of different shapes, and for combined heat transfer in a flow passage. Numerical results demonstrate that exact one dimensional elements offer advantages over elements based on approximate interpolation functions. Previously announced in STAR as N81-31507

Thornton, E. A.↗
NASA NTRS1988

Evaluation of a flexible wall testing technique to minimize wall interferences in the NASA Langley 0.3-m Transonic Cryogenic Tunnel

Free air simulations in conventional transonic wind tunnels require improvement which adaptive wall testing techniques can provide primarily by minimizing wall interferences. In addition, these techniques offer other substantial advantages such as increased Reynolds number capability and a reduction in tunnel drive power. The combination of an adaptive wall test section with a continuous flow cryogenic wind tunnel is unique. The test section has four solid walls with two flexible walls mounted between rigid sidewalls. This modification of an existing major facility stresses the practicalities of the testing technique. These practicalities were evaluated in terms of flexible wall test section design and operation. Increased hardware and operating complexity of the new test section is offset by a significant improvement in real-time data accuracy in two-dimensional testing. Validation testing has expanded the experience with flexible walled test sections into the realms of flight Reynolds numbers and high lift. Data accuracy has been assessed with regard to test section geometry and operating tolerances. The successful evaluation of the testing technique in two-dimensional testing has proved that a production type operation is possible, with suitable control system and test section design. The 0.3-m Transonic Cryogenic Tunnel with an adaptive wall test section currently represents the most advanced two-dimensional facility anywhere.

Wolf, Stephen W. D.↗
NASA NTRS1989

The effects of radiative heat loss on microgravity flame spread

The effect of radiative heat loss from the surface of a solid material burning in a zero gravity environment in an opposed flow is studied through the use of a numerical model. Radiative heat loss is found to decrease the flame spread rate, the boundary layer thickness, and pyrolysis lengths. Blowoff extinction is predicted to occur at slower opposesd flow velocities than would occur if the radiative loss is not present. The radiative heat fluxes are comparable to the conduction fluxes, indicating the significance of the surface energy loss.

Fakheri, Ahmad↗
NASA NTRS1990

Radiographic instrumentation for DPM experiments

New developments in x-ray radiography that may be applicable to containerless experimentation are presented. The two features discussed are the use of radiography to determine the position and shape of the solid-liquid interface and, with the aid of appropriate markers, the flow patterns in either the surface or bulk of the liquid state. Both surface energy and fluid viscosity measurements can be made with the aid of the described radiographic system.

Fripp, Archie L.↗
NASA NTRS1993

An Interactive Tool for Discrete Phase Analysis in Two-Phase Flows

Under a NASA MSFC SBIR Phase 1 effort an interactive software package has been developed for the analysis of discrete (particulate) phase dynamics in two-phase flows in which the discrete phase does not significantly affect the continuous phase. This package contains a Graphical User Interface (based on the X Window system and the Motif tool kit) coupled to a particle tracing program, which allows the user to interactively set up and run a case for which a continuous phase grid and flow field are available. The software has been applied to a solid rocket motor problem, to demonstrate its ease of use and its suitability for problems of engineering interest, and has been delivered to NASA Marshall Space Flight Center.

Dejong, Frederik J.↗
NASA NTRS1998

Experiment 2: Vapor Transport Crystal Growth of Mercury Cadmium Telluride in Microgravity- USML-2

The new epitaxial growth experiments of Hg(l-x)Cd(x)Te on (100) CdTe substrates by chemical vapor transport (CVT), using HgI2 as a transport agent, were performed in the transient growth regime of this ternary, heteroepitaxial system at normal and reduced gravity during the USML-2 flight. The surface and interface morphology, the compositional and structural uniformity, and carrier mobility of the epitaxial layer and islands grown in microgravity are measurably improved relative to ground specimens. These observations demonstrate the effects of convective flow on the transport, deposition, and growth processes of this solid-vapor system even in the transient growth regime. The properties of the Hg(l-x)Cd(x)Te layer grown in a microgravity environment compare quite favorably to those of layers obtained by other techniques.

Wiedemeier, H.↗
NASA NTRS1966

Some Observations on Exhaust Recirculation from Clustered Rocket Nozzles

A short-duration rocket testing technique which exactly duplicates the combustion flows of multi-engine rocket boosters at high altitudes is described. The application of this technique to the investigation of the reverse flow characteristics of a 4-engine rocket cluster model is discussed. The use of a comparatively new diagnostic tool, the electron beam density probe, in mapping the recirculating flow field of a rocket cluster is described and experimental density results presented. Finally, the use of a reflection plane for the examination of reverse flow phenomena, whereby a plane of symmetry is replaced by a solid surface on which measurements may be made,is evaluated and experimental data presented.

Hendershot, K. C.↗
NASA NTRS2015

Initial Assesment of Space Launch System Transonic Unsteady Pressure Environment

A series of wind tunnel tests were conducted at the NASA Langley Research Center Transonic Dynamics Tunnel to assess the transonic buffet environment for the Space Launch System (SLS) launch vehicle. An initial test, conducted in 2012, indicated an elevated buffet environment prompting a second test to provide further insight into the buffet phenomena and assess potential solutions to reduce the response levels of these environments. During the course of the test program, eight variants of the SLS-10000 configuration were examined. The effect of these configuration variants on the coefficient of the root-mean-square fluctuation of pressure about the mean as a function of test condition indicates that the maximum fluctuating pressure levels are extremely sensitive to the geometry of the forward attachment of the solid rocket boosters (SRBs) to the SLS Core. The addition of flow fences or changes to the SRB nose cone geometry can alleviate the unsteady pressure environment.

Sekula, Martin K.↗
NASA NTRS2013

Shear Stress Sensing using Elastomer Micropillar Arrays

The measurement of shear stress developed as a fluid moves around a solid body is difficult to measure. Stresses at the fluid-solid interface are very small and the nature of the fluid flow is easily disturbed by introducing sensor components to the interface. To address these challenges, an array of direct and indirect techniques have been investigated with various advantages and challenges. Hot wire sensors and other indirect sensors all protrude significantly into the fluid flow. Microelectromechanical systems (MEMS) devices, although facilitating very accurate measurements, are not durable, are prone to contamination, and are difficult to implement into existing model geometries. One promising approach is the use of engineered surfaces that interact with fluid flow in a detectable manner. To this end, standard lithographic techniques have been utilized to generate elastomeric micropillar arrays of various lengths and diameters. Micropillars of controlled length and width were generated in polydimethylsiloxane (PDMS) elastomer using a soft-lithography technique. The 3D mold for micropillar replication was fabricated using laser ablative micromachining and contact lithography. Micropillar dimensions and mechanical properties were characterized and compared to shear sensing requirements. The results of this characterization as well as shear stress detection techniques will be discussed.

Wohl, Christopher J.↗
NASA NTRS2017

The Chemistry of Pluto and its Satellites

Pluto's bulk composition and the composition of the surface layers hold clues to the origin and evolution of a number of other Solar System bodies of comparable size in the region beyond Neptune. The July 14, 2015 flyby of the Pluto system with the New Horizons spacecraft afforded the opportunity to corroborate and greatly improve discoveries about the planet and its satellites derived Earth-based studies. It also revealed extraordinary details of the surface and atmosphere of Pluto, as well as the geology and composition of Charon and two smaller satellites. With a mean density of 1.86 g/sq cm, the bulk composition of Pluto is about two-thirds anhydrous solar composition rocky material and one-third volatiles (primarily H2O in liquid and solid states) by mass, the surface is a veneer of ices dominated by N2, with smaller amounts of CH4 and CO, as well as limited exposures of H2O ice (considered to be "bedrock"). N2, CH4, and CO occur as solid solutions at temperature-dependent mutual concentrations, each component being soluble in the others. Frozen C2H6 as a minor component has also been identified. Sublimation and recondensation of N2, CH4, and CO over seasonal (248 y) and Milankovich-type megaseasons (approx. 3 My) result in the redistribution of these ices over time and with latitude control. Solid N2 is found in glaciers originating in higher elevations and flowing at the present time into a basin structure larger than the State of Texas, forming a convecting lens of N2 that overturns on a timescale of order 10 My. The varied colors of Pluto's landscape arise from the energetic processing of the surface ices in processes that break the simple molecules and reassemble complex organic structures consisting of groups of aromatic rings connected by aliphatic chains. When synthesized in the laboratory by UV or electron irradiation of a Pluto mix of ice, this material, called tholin, has colors closely similar to Pluto. The Pluto ice tholin analog contains carboxylic acids, urea, ketones, aldehydes, amines, and some nitriles. The largest satellite, Charon has density 1.70 g/sq cm and it is about 3/5 anhydrous solar composition rock, with the remainder in H2O ice. The surface H2O ice is infused in some way with NH3, probably as a hydrate, distributed nonuniformly, but to some degree related to geological structures. Pluto's atmosphere is N2, CH4, with CO, C2-hydrocarbons, HCN, and other molecules in trace but detectable amounts. The atmosphere supports a complex haze structure with about 20 discrete layers, and suspected clouds. The haze is presumed to be made of aggregates of complex hydrocarbons (tholins) produced by photolysis of the atmospheric gases, and with similar composition to the ice tholins made on the planet's surface. Urea and a suite of carboxylic acids are of interest for prebiotic and biological chemistries.

SOLAR SYSTEMS↗
NASA NTRSDate not supplied

Atmospheric Escape and Planetary Atmosphere Evolution. the Complex Role of Magnetization

Exoplanetary research is currently steered by investigations into the characteristics and evolution of their atmospheres. The fundamental inquiries encompass whether a given exoplanet possesses an atmosphere and, if so, how its attributes have evolved over time. The atmospheric composition reflects a delicate equilibrium between the inbound and outbound flows of volatiles, whether between space, surface, or between liquid and solid phases. Understanding atmospheric escape is, therefore, a critical facet of such studies. Especially, exoplanets that are relatively light and situated near their host stars are prone to substantial atmospheric loss, potentially resulting in barren celestial bodies. Thus, it becomes vital to comprehend the atmospheric responses to the host stars' activities, alongside other factors influencing atmospheric evolution. In that context, there persists a common narrative in the scientific community that frames a planetary magnetic field as a 'shield' against atmospheric escape. However, this study challenges the oversimplification of this premise, taking a closer look at the nuanced role magnetization plays in planetary atmospheric defense mechanisms. We will review the escape processes in the light of the different mechanisms and of the recent observations to highlight which processes have to carefully be taken into account.

Guillaume Gronoff↗
DOE OSTI2021

Novel Membrane-Based Corrosion Sensors For Operating In Natural Gas Pipelines

Membrane-based electrochemical sensors (MBES) provide an attractive option for real-time continuous humidity and corrosion rate measurements inside of natural gas pipelines. The MBES, can use electrochemical techniques such as linear polarization resistance and electrochemical impedance spectroscopy even when a conductive aqueous phase is intermittent or unavailable. We now present field-test performance data of our MBES operated inside a multiphase water and natural gas flow facility. The MBES measured internal corrosion and conductivity at the top, bottom, and side of the pipe spool. Tests were carried out with flow rates of 4.6, 9.1, and 18.3 m/s, temperatures of 21, 29, and 35 °C, and a pressure of 1000 psia. All sensors followed similar trends in open circuit potential, corrosion rate, and conductivity over time. Neither flow rate, temperature, nor build-up of metal-based solids on the sensor surfaces impacted the quality of the electrochemical measurements. The field-test results confirm that the membrane-based electrochemical sensors are suitable for monitoring internal corrosion of operational natural-gas pipelines.

Duffy, Timothy↗
DOE OSTI2023

Electrochemical Characterization of Molten Salt Chemistry During Atmospheric Ingressions

This report describes the salt chemistry and sedimentation studies that were completed in FY23 as part of the Pyrochemical Fuel Cycles – ANL project. The primary objective of these activities was to employ electrochemical methods in order to quantify and gain insights into the reaction mechanisms associated with the interaction of O2 and moisture impurities with the molten chloride salts used for the pyrochemical processing of nuclear materials. If not monitored and controlled, the ingression of these atmospheric impurities can lead to changes in the salt redox conditions and initiate the formation of oxide particles, potentially resulting in operational and safeguards challenges. By elucidating the mechanisms underlying the formation of oxide particles, we can effectively monitor the conditions of the salt and design systems to mitigate the influence of atmospheric O2 and H2O. To achieve these goals, we designed a test system that allowed for precisely controlled gas ingressions into the molten salt vessel. This system included on-line monitoring provided by electrochemical probes that enable near real-time measurements of the salt conditions throughout the course of the experiment. Using this system, we systematically varied experimental conditions, including O2/Ar flow rates and O2 concentrations, to comprehensively understand their impact on solid particle formation. We also used a particle size and shape analyzer to characterize the particles that were generated. Tests in FY23 concentrated on the formation of CeO2 particles, but we also prepared a separate apparatus targeting UO2 particles for use in FY24. We additionally conducted extensive modeling activities in support of this work. This included multiphysics simulations of the gas ingressions along with the development of a machine learning workflow to enable accelerated molecular dynamics modeling of the molten salt chemistry of LiCl-KCl-UCl3. The combination of experimental and modeling tools has allowed us to begin to get a more complete understanding of the reactions that occur when atmospheric ingressions occur in pyroprocessing systems.

Guo, Jicheng↗
NASA NTRS1969

Fundamental considerations for future solid lubricants

Properties important to the performance of solid lubricants are discussed. Those properties include shear characteristics, coherence between particles, resistance to cold flow, adherence to the substrate, applicable chemical thermodynamics and kinetics of materials and environments, polymorphism, and rheology. The following generalizations are made: (1) chemical thermodynamics and kinetics are powerful tools for use in determining the useful environments and methods of application for solid film lubricants; (2) the primary requirement for a solid lubricant is low shear strength; (3) the rheology of solid film constituents and formulations is likely to be of vital importance to performance and life; and (4) adherence and mobility of surface films is another primary requirement for long lived solid lubricants.

Johnson, R. L.↗