Search NASA⌕ Search

SEARCH · Search NASA

Results for “structured waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Inelastic x-ray scattering studies on dynamic structure factor of polymeric liquid Se under pressure

Inelastic X-ray scattering measurements at 25 MPa using synchrotron radiation were carried out for semiconducting liquid Se at high temperatures up to 1673 K. The excitation energy of the acoustic mode disperses approximately 10-50 % faster than the ultrasonic sound velocity in the observed temperature range while the ultrasonic sound rapidly slows down with increasing temperature. We carried out X-ray scattering measurements and found that the average coordination number at 1673 K is 1.3, indicating that the high temperature liquid consists of short chain molecules. These results suggest that weakening of the interatomic interaction is correlated with breaking of polymeric chain molecules.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Active–Source Seismic Tomography at the Brady Geothermal Field, Nevada, with Dense Nodal and Fiber–Optic Seismic Arrays

We deployed a dense seismic array to image the shallow structure in the injection area of the Brady Hot Springs geothermal power plant in western Nevada. The array was composed of 238 three-component, 5 Hz nodal instruments, 8700 m of distributed acoustic sensing (DAS) fiber-optic cable (FOC) installed horizontally in surface trenches, and 400 m of FOC installed vertically in a borehole. The geophone array had about 60 m instrument spacing in the target zone, whereas DAS channel separations were about 1 m with an averaging (gauge) length of 10 m. The acquisition systems provided 15 days of continuous records, including active-source and ambient noise signals. A large vibroseis truck was operated at 196 locations, exciting a swept-frequency signal from 5 to 80 Hz over 20 s using three vibration modes (vertical, longitudinal, and transverse), with three sweeps per mode at each site. Sweeps were repeated up to four times at each site during four different stages of power plant operation: normal operation, shutdown, high and oscillatory injection and production, and normal operation. After removal of the sweep signal from the raw data, the first P-wave arrivals were automatically picked using a combination of methods. Here, the travel times were then used to invert for the 3D P-wave velocity structure. Models with 100 m horizontal and 20–50 m vertical node spacing were obtained, covering an area 2000 m by 1300 m, with acceptable resolution extending to about 250 m below surface. The travel-time data were fit to a root mean square (rms) misfit of 31 ms, close to our estimated picking uncertainty. Lateral boundaries between high and low velocity zones agree relatively well with the location of local faults from previous studies, and low near-surface velocities are associated with faults and fumarole locations. A sharp increase in velocity from < 1500 to > 2000 m/s at approximately 50 m below the ground surface in many parts of the study area may indicate a shallower water table than expected for the region.

15 GEOTHERMAL ENERGY↗

Novel deflecting cavity design for eRHIC

To prevent significant loss of the luminosity due to large crossing angle in the future ERL based Electron Ion Collider at BNL (eRHIC), there is a demand for crab cavities. In this article, we will present a novel design of the deflecting/crabbing 181 MHz superconducting RF cavity that will fulfil the requirements of eRHIC. The quarter-wave resonator structure of the new cavity possesses many advantages, such as compact size, high R{sub t}/Q, the absence of the same order mode and lower order mode, and easy higher order mode damping. We will present the properties and characteristics of the new cavity in detail. As the accelerator systems grow in complexity, developing compact and efficient deflecting cavities is of great interest. Such cavities will benefit situations where the beam line space is limited. The future linac-ring type electron-ion collider requires implementation of a crab-crossing scheme for both beams at the interaction region. The ion beam has a long bunches and high rigidity. Therefore, it requires a low frequency, large kicking angle deflector. The frequency of the deflecting mode for the current collider design is 181 MHz, and the deflecting angle is {approx}5 mrad for each beam. At such low frequency, the previous designs of the crab cavities will have very large dimensions, and also will be confronted by typical problems of damping the Lower Order Mode (LOM), the Same Order Mode (SOM), and as usual, the Higher Order Modes (HOM). In this paper we describe how one can use the concept of a quarter-wave (QW) resonator for a deflecting/crabbing cavity, and use its fundamental mode to deflect the beam. The simplicity of the cavity geometry and the large separation between its fundamental mode and the first HOM make it very attractive.

43 PARTICLE ACCELERATORS↗

Magnetically Controlled Tunneling of a TE Wave through the Ferrite—ε-Negative Layer Structure

We have considered the tunneling of a normally incident electromagnetic wave through a bilayer structure that consists of a ferrite layer and an adjoining layer with a negative permittivity. The ferrite layer is transversely magnetized by an external magnetic field that corresponds to the range of negative values of the effective permeability. It has been shown that the transmission of the structure can be controlled in wide limits by varying the external magnetic field. In particular, nearly perfect tunneling (viz., nonreflective transmission of incident radiation) can be realized.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A GODUNOV METHOD FOR MULTIDIMENSIONAL RADIATION MAGNETOHYDRODYNAMICS BASED ON A VARIABLE EDDINGTON TENSOR

We describe a numerical algorithm to integrate the equations of radiation magnetohydrodynamics in multidimensions using Godunov methods. This algorithm solves the radiation moment equations in the mixed frame, without invoking any diffusion-like approximations. The moment equations are closed using a variable Eddington tensor whose components are calculated from a formal solution of the transfer equation at a large number of angles using the method of short characteristics. We use a comprehensive test suite to verify the algorithm, including convergence tests of radiation-modified linear acoustic and magnetosonic waves, the structure of radiation-modified shocks, and two-dimensional tests of photon bubble instability and the ablation of dense clouds by an intense radiation field. These tests cover a very wide range of regimes, including both optically thick and thin flows, and ratios of the radiation to gas pressure of at least 10{sup -4}-10{sup 4}. Across most of the parameter space, we find that the method is accurate. However, the tests also reveal there are regimes where the method needs improvement, for example when both the radiation pressure and absorption opacity are very large. We suggest modifications to the algorithm that will improve the accuracy in this case. We discuss the advantages of this method over those based on flux-limited diffusion. In particular, we find that the method is not only substantially more accurate, but often no more expensive than the diffusion approximation for our intended applications.

79 ASTRONOMY AND ASTROPHYSICS↗

Numerical study of strong plasma shock waves produced in an electromagnetic shock tube.

A set of two-fluid Navier-Stokes equations with classical physical transport coefficients is used to compute the evolution and structure of collisional plasma shock waves in an electromagnetic shock tube. Shock speeds up to 200 cm/microsec and shocked-plasma temperatures of the order of kilovolts are studied. A strong transverse bias magnetic field is employed, which significantly alters the size and shape of the shock profiles, when compared with the zero bias field case. The wave structure is different from that of a two-fluid gasdynamic shock without transverse magnetic field. Especially significant is the effect of the small ion Larmor radius in reducing the gasdynamic shock thickness by at least an order of magnitude in the transverse shock case, which permits collisional shocks to have thicknesses much smaller than the post-shock mean free path. These collisional shock waves produce very hot ions, the ion temperature increasing with shock speed, although the formation time and distances also increase substantially with shock speed.

Schneider, S. H.↗

Tracking the Pacific Decadal Precession

Events of recent years—including extended droughts across California, record fires across western Canada, and destabilization of marine ecosystems—highlight the profound impact of multiannual to decadal-scale climate shifts upon physical, biological, and socioeconomic systems. While previous research has focused on the influence of decadal-scale climate oscillations such as the Atlantic Multidecadal Oscillation and the Pacific Decadal Oscillation/Interdecadal Pacific Oscillation, recent research has revealed the presence of a quasi-decadal mode of climate variability that, unlike the quasi-stationary standing wave-like structure of the oscillatory modes, involves a progression of atmospheric pressure anomalies around the North Pacific, which has been termed the Pacific Decadal Precession (PDP). In this study we develop a set of methods to track the spatial and temporal evolutions of the PDP within historical observations as well as numerical model simulations. In addition, we provide a method that approximates the time evolution of the PDP across the full period of available data for real-time monitoring of the PDP. Finally, through the development of these tracking methods, we hope to provide the community with a consistent framework for future analysis and diagnosis of the PDP's characteristics and underlying processes, thereby avoiding the use of different, and disparate, phenomenological- and mathematical-based indices that can confound our understanding of the PDP and its evolution.

54 ENVIRONMENTAL SCIENCES↗

Modelling the Fluctuations of Reactive Shock Waves in Heterogeneous Solid Explosives as Stochastic Processes

Although current phenomenological burn models are useful for describing the average or bulk reactive flow behaviour of heterogeneous explosives, one fundamental weakness inherent to these models is the loss of detailed microstructural information at the scale of the calculation. In order to include the effects of the microstructure, and in particular the underlying material heterogeneities that influence the build-up to detonation, a new paradigm is put forth for modelling sub-grid, reaction-induced fluctuations (i.e. “hot spots”) at the continuum level. This modelling approach assumes that the reaction rate is stochastic, rather than deterministic, and it uses Langevin-type equations with a mathematical framework built upon Itô calculus and Lambourn's CIM model for shocked heterogeneous explosives. This approach follows directly from our previous letter, Ref. [1], and is inspired by the probability density function (pdf) methods used in turbulent reactive flows. Here, the stochastic burn model is derived, implemented, and exercised far beyond what has been shown in previous work. New hydrocode simulation results demonstrate the role of stochastic fluctuations during shock initiation; these fluctuations are approximated by collections of discrete particles, that evolve with drift (i.e. deterministic) and diffusion (i.e. stochastic) coefficients. Furthermore, the particle values are propagated and averaged to calculate the heat release, yield strength, and material impedance in each computational cell. Hydrocode simulation results further show how the fluctuating hot spot energy may or may not be transmitted to the wave front, and result in a detonation wave-like structure. The fundamental stochastic nature of this model permits simulations to have varying outcomes with the same initial conditions; this allows for go/no-go estimation (e.g., marginal or failed detonations), which might possibly be calibrated using the statistical distributions from real materials. Mesoscale calculations of shocked heterogeneous explosives also show that these fluctuations are physically justified (i.e., Ref. [2]), and it is hypothesized that the pdf functions provide a link between the meso(grain) and continuum scales for practical engineering calculations. Hence, our approach is a paradigm shift for building efficient, reduced order continuum burn models, that represent the sub-grid stochastic behaviour of shocked heterogeneous solid explosives.

42 ENGINEERING↗

Design of a finline antenna for current drive in TST-2

A novel “finline” antenna was designed to excite lower-hybrid waves (LHWs) for plasma current drive at 2.45 GHz in the TST-2 spherical tokamak. A periodic fin array acts as a transmission line for electromagnetic surface waves. Cold tests confirmed propagation of the electromagnetic surface wave on the fin array which was dominantly Transverse Magnetic (TM). Unlike the conventional waveguide array “grill” antenna, the finline antenna requires only two ports to feed all the elements, and calculations show that there is little reflection regardless of the plasma conditions in front of the antenna. Characteristics of the microwave transmission on the fin array were investigated using a three-dimensional full-wave simulation and the fin geometry was tuned to achieve the desired refractive index. Coupling to LHWs under typical TST-2 scrape-off layer conditions was confirmed by the simulation. Finally, to demonstrate LHW excitation, the finline antenna was energized in the presence of a plasma generated by another 200 MHz LH antenna. The x-ray radiation showed strong enhancement during the finline antenna pulse which indicated successful generation of fast electrons by LHWs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Surface modification induced phase transformation and structure variation on the rapidly solidified recast layer of titanium

In this study, neodymium-doped yttrium orthovanadate (Nd:YVO{sub 4}) as a laser source with different scanning speeds was used on biomedical Ti surface. The microstructural and biological properties of laser-modified samples were investigated by means of optical microscope, electron microscope, X-ray diffraction, surface roughness instrument, contact angle and cell cytotoxicity assay. After laser modification, the rough volcano-like recast layer with micro-/nanoporous structure and wave-like recast layer with nanoporous structure were generated on the surfaces of laser-modified samples, respectively. It was also found out that, an α → (α + rutile-TiO{sub 2}) phase transition occurred on the recast layers of laser-modified samples. The Ti surface becomes hydrophilic at a high speed laser scanning. Moreover, the cell cytotoxicity assay demonstrated that laser-modified samples did not influence the cell adhesion and proliferation behaviors of osteoblast (MG-63) cell. The laser with 50 mm/s scanning speed induced formation of rough volcano-like recast layer accompanied with micro-/nanoporous structure, which can promote cell adhesion and proliferation of MG-63 cell on Ti surface. The results indicated that the laser treatment was a potential technology to enhance the biocompatibility for titanium. - Highlights: • Laser induced the formation of recast layer with micro-/nanoporous structure on Ti. • An α → (α + rutile-TiO{sub 2}) phase transition was observed within the recast layer. • The Ti surface becomes hydrophilic at a high speed laser scanning. • Laser-modified samples exhibit good biocompatibility to osteoblast (MG-63) cell.

36 MATERIALS SCIENCE↗

SLIM Ultrahigh Resolution Ion Mobility Spectrometry Separations of Isotopologues and Isotopomers Reveal Mobility Shifts due to Mass Distribution Changes

We report on separations of ion isotopologues and isotopomers using ultrahigh-resolution traveling wave-based Structures for Lossless Ion Manipulations with serpentine ultralong path and extended routing ion mobility spectrometry coupled to mass spectrometry (SLIM SUPER IMS-MS). Mobility separations of ions from the naturally occurring ion isotopic envelopes (e.g., [M], [M+1], [M+2]…ions) showed the first and second isotopic peaks (i.e. [M+1] and [M+2]) for various tetraalkylammonium ions could be resolved from their respective monoisotopic ion peak ([M]) after SLIM SUPER IMS with resolving powers of ~400-600. Similar separations were obtained for other compounds (e.g., tetrapeptide ions). Greater separation was obtained using argon versus helium drift gas, as expected from the greater reduced mass contribution to ion mobility described by the Mason-Schamp relationship. To more directly explore the role of isotopic substitutions, we studied a mixture of specific isotopically substituted (15N, 13C, and 2H) protonated arginine isotopologues. While the separations in nitrogen were primarily due to their reduced mass differences, similar to the naturally occurring isotopologues, their separations in helium, where higher resolving powers could also be achieved, revealed distinct additional relative mobility shifts. These shifts appeared correlated, after correction for the reduced mass contribution, with changes in the ion center of mass due to the different locations of heavy atom substitutions. The origin of these apparent mass distribution- induced mobility shifts was then further explored using a mixture of Iodoacetyl Tandem Mass Tag (iodoTMT) isotopomers (i.e. each having the same exact mass, but with different isotopic substitution sites). Again, the observed mobility shifts appeared correlated with changes in the ion center of mass leading to multiple monoisotopic mobilities being observed for some isotopomers (up to a ~0.04% difference in mobility). These mobility shifts thus appear to reflect details of the ion structure, derived from the changes due to ion rotation impacting collision frequency or momentum transfer, and highlight the potential for new approaches for ion structural characterization.

Isotopologues, isotopomers, SLIM, Ion Mobility Spe↗

PySpawn: Software for Nonadiabatic Quantum Molecular Dynamics

The ab initio multiple spawning (AIMS) method enables nonadiabatic quantum molecular dynamics simulations in an arbitrary number of dimensions, with potential energy surfaces provided by electronic structure calculations performed on-the-fly. However, the intricacy of the AIMS algorithm complicates software development, deployment on modern shared computer resources, and post-simulation data analysis. PySpawn is a nonadiabatic molecular dynamics software package that addresses these issues. Here, the program is designed to be easily interfaced with electronic structure software, and an interface to the TeraChem software package is described here. PySpawn introduces a task-based reorganization of the AIMS algorithm, allowing fine-grained restart capability and setting the stage for efficient parallelization in a future release. PySpawn includes a user-friendly and interactive Python analysis module that will enable novice users to painlessly adopt AIMS. As a demonstration of PySpawn’s simulation capability and analysis module, we report complete active space self-consistent field–based AIMS simulations of the 1,2- dithienyl-1,2-dicyanoethene molecule, a promising molecular photoswitch.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Seismic Imaging of a Shale Landscape Under Compression Shows Limited Influence of Topography–Induced Fracturing

We used seismic refraction to image the P-wave velocity structure of a shale watershed experiencing regional compression in the Valley and Ridge Province (USA). From estimates showing strong compressional stress, we expected the depth to unweathered bedrock to mirror the hill-valley-hill topography (“bowtie pattern”) by analogy to seismic velocity patterns in crystalline bedrock in the North American Piedmont that also experience compression. Previous researchers used failure potentials calculated for strong compression in the Piedmont to suggest fractures are open deeper under hills than valleys to explain the “bowtie” pattern. Seismic images of the shale watershed, however, show little evidence of such a “bowtie.” Instead, they are consistent with weak (not strong) compression. Here, this contradiction could be explained by the greater importance of infiltration-driven weathering than fracturing in determining seismic velocities in shale compared to crystalline bedrock, or to local perturbations of the regional stress field due to lithology or structures.

58 GEOSCIENCES↗

Coupling of ion temperature gradient and trapped electron modes in the presence of impurities in tokamak plasmas

The coupling of ion temperature gradient (ITG or η{sub i}) mode and trapped electron mode (TEM) in the presence of impurity ions is numerically investigated in toroidal collisionless plasmas, using the gyrokinetic integral eigenmode equation. A framework for excitations of the ITG modes and TEMs with respect to their driving sources is formulated first, and then the roles of impurity ions played in are analyzed comprehensively. In particular, the characteristics of the ITG and TEM instabilities in the presence of impurity ions are emphasized for both strong and weak coupling (hybrid and coexistent) cases. It is found that the impurity ions with inwardly (outwardly) peaked density profiles have stabilizing (destabilizing) effects on the hybrid (namely the TE-ITG) modes in consistence with previous works. A new finding of this work is that the impurity ions have stabilizing effects on TEMs in small η{sub i} (η{sub i}≤1) regime regardless of peaking directions of their density profiles whereas the impurity ions with density gradient L{sub ez}=L{sub ne}/L{sub nz}>1 (L{sub ez}<1) destabilize (stabilize) the TEMs in large η{sub i} (η{sub i}≥1) regime. In addition, the dependences of the growth rate, real frequency, eigenmode structure, and wave spectrum on charge concentration, charge number, and mass of impurity ions are analyzed in detail. The necessity for taking impurity ion effects on the features of turbulence into account in future transport experimental data analyses is also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gigawatt-class radiation generated by a Ka-band overmoded Cherenkov-type high power millimeter wave generator

Particle simulation and experimental results are presented about a Ka-band overmoded Cherenkov-type high power millimeter wave generator in this paper. The relativistic electron beam with peak current of 8.4 kA was generated by a pulsed power accelerator working at the voltage of 625 kV, which was guided by an axial magnetic field of 1.05 T and transported through the beam-wave interaction structures. After careful calibration, the microwave power radiated in the far field was as high as about 500 MW, with a frequency of 32.1 GHz and a pulse width of 20 ns. The radiation mode was well controlled to be TM{sub 0n} mode.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Nonlinear structures: Cnoidal, soliton, and periodical waves in quantum semiconductor plasma

Properties and emerging conditions of various nonlinear acoustic waves in a three dimensional quantum semiconductor plasma are explored. A plasma fluid model characterized by degenerate pressures, exchange correlation, and quantum recoil forces is established and solved. Our analysis approach is based on the reductive perturbation theory for deriving the Kadomtsev-Petviashvili equation from the fluid model and solving it by using Painlevé analysis to come up with different nonlinear solutions that describe different pulse profiles such as cnoidal, soliton, and periodical pulses. The model is then employed to recognize the possible perturbations in GaN semiconductor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗