Search NASA⌕ Search

SEARCH · Search NASA

Results for “systems analysis programs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Handling Qualities Flight Testing of the Stratospheric Observatory for Infrared Astronomy (SOFIA)

Airborne infrared astronomy has a long successful history, albeit relatively unknown outside of the astronomy community. A major problem with ground based infrared astronomy is the absorption and scatter of infrared energy by water in the atmosphere. Observing the universe from above 40,000 ft puts the observation platform above 99% of the water vapor in the atmosphere, thereby addressing this problem at a fraction of the cost of space based systems. The Stratospheric Observatory For Infrared Astronomy (SOFIA) aircraft is the most ambitious foray into the field of airborne infrared astronomy in history. Using a 747SP (The Boeing Company, Chicago, Illinois) aircraft modified with a 2.5m telescope located in the aft section of the fuselage, the SOFIA endeavors to provide views of the universe never before possible and at a fraction of the cost of space based systems. The modification to the airplane includes moveable doors and aperture that expose the telescope assembly. The telescope assembly is aimed and stabilized using a multitude of on board systems. This modification has the potential to cause aerodynamic anomalies that could induce undesired forces either at the cavity itself or indirectly due to interference with the empennage, both of which could cause handling qualities issues. As a result, an extensive analysis and flight test program was conducted from December 2009 through March 2011. Several methods, including a Lower Order Equivalent Systems analysis and pilot assessment, were used to ascertain the effects of the modification. The SOFIA modification was found to cause no adverse handling qualities effects and the aircraft was cleared for operational use. This paper discusses the history and modification to the aircraft, development of test procedures and analysis, results of testing and analysis, lessons learned for future projects and justification for operational certification.

Glaser, Scott T.↗

Investigation of dynamic noise affecting geodynamics information in a tethered subsatellite

The effects of a tethered satellite system's internal dynamics on the subsatellite were calculated including both overall motions (libration and attitude oscillations) and internal tether oscillations. The SKYHOOK tether simulation program was modified to operate with atmospheric density variations and to output quantities of interest. Techniques and software for analyzing the results were developed including noise spectral analysis. A program was begun for computing a stable configuration of a tether system subject to air drag. These configurations will be of use as initial conditions for SKYHOOK and, through linearized analysis, directly for stability and dynamical studies. A case study in which the subsatellite traverses an atmospheric density enhancement confirmed some theoretical calculations, and pointed out some aspects of the interaction with the tether system dynamics.

Gullahorn, G. E.↗

Recent Activities of the Marshall Space Flight Center Natural Environments Branch Terrestrial & Planetary Environments Team

- The Natural Environments (NE) Branch is within the MSFC Engineering Directorate’s Spacecraft and Vehicle System (S&VS) Department - S&VS plans, performs and directs the technical Design, Analysis, Test, Evaluation, Verification, Integration, and Applied Research and Development of future Spacecraft and Launch Vehicle Systems - Current programs we support - Space Launch System, Human Landing System, Mars Ascent Vehicle, Orion, Gateway - NE maintains expertise in terrestrial, space, and planetary natural environments definition, characterization, and analysis - Responsibility to disseminate this expertise to Agency programs and projects in support of environment definition, requirements development, vehicle development, operations, and sustaining engineering through program’s life cycle - Branch has two teams; Terrestrial and Planetary Environments (T&PE) and Space Environments (SE) - T&PE has extensive expertise characterizing terrestrial surface and atmospheric (aloft) environments - Winds, temperature, humidity, pressure, lightning, density, precipitation, radiant energy, aerosols, sea state, sea surface temperature - Maintains climatological databases for engineering analyses

Ryan K. Decker↗

Numerical Zooming Between a NPSS Engine System Simulation and a One-Dimensional High Compressor Analysis Code

Within NASA's High Performance Computing and Communication (HPCC) program, NASA Glenn Research Center is developing an environment for the analysis/design of aircraft engines called the Numerical Propulsion System Simulation (NPSS). NPSS focuses on the integration of multiple disciplines such as aerodynamics, structures, and heat transfer along with the concept of numerical zooming between zero-dimensional to one-, two-, and three-dimensional component engine codes. In addition, the NPSS is refining the computing and communication technologies necessary to capture complex physical processes in a timely and cost-effective manner. The vision for NPSS is to create a "numerical test cell" enabling full engine simulations overnight on cost-effective computing platforms. Of the different technology areas that contribute to the development of the NPSS Environment, the subject of this paper is a discussion on numerical zooming between a NPSS engine simulation and higher fidelity representations of the engine components (fan, compressor, burner, turbines, etc.). What follows is a description of successfully zooming one-dimensional (row-by-row) high-pressure compressor analysis results back to a zero-dimensional NPSS engine simulation and a discussion of the results illustrated using an advanced data visualization tool. This type of high fidelity system-level analysis, made possible by the zooming capability of the NPSS, will greatly improve the capability of the engine system simulation and increase the level of virtual test conducted prior to committing the design to hardware.

Follen, Gregory↗

Development and application of a generalized transient computer program for Shuttle atmospheric pressure and composition control analysis

A generalized computer program for analysis of pressure and composition in a multiple-volume system has been developed by NASA. This paper describes the development of the program, outlines the program's capabilities, and illustrates the application of the program to Space Shuttle-related atmospheric pressure and composition control analyses. The program's features include the calculation of transient partial pressures of four gases in four volumes, an option for either isothermal or temperature-transient analyses, simulation of pressure and composition control hardware, and simulation involving 0-10 crewmembers. This computer program has been used successfully for a variety of Shuttle-related analyses to support hardware design, develop operating procedures, and provide real-time Shuttle mission support. Due to the versatility of this computer program, it will be utilized for Space Station program analyses.

Lafuse, S. A.↗

Developing a Graphical User Interface for the ALSS Crop Planning Tool

The goal of my project was to create a graphical user interface for a prototype crop scheduler. The crop scheduler was developed by Dr. Jorge Leon and Laura Whitaker for the ALSS (Advanced Life Support System) program. The addition of a system-independent graphical user interface to the crop planning tool will make the application more accessible to a wider range of users and enhance its value as an analysis, design, and planning tool. My presentation will demonstrate the form and functionality of this interface. This graphical user interface allows users to edit system parameters stored in the file system. Data on the interaction of the crew, crops, and waste processing system with the available system resources is organized and labeled. Program output, which is stored in the file system, is also presented to the user in performance-time plots and organized charts. The menu system is designed to guide the user through analysis and decision making tasks, providing some help if necessary. The Java programming language was used to develop this interface in hopes of providing portability and remote operation.

Koehlert, Erik↗

Finite element microscopic stress analysis of cracked composite systems

This paper considers the stress concentration problems of two types of cracked composite systems: (1) a composite system with a broken fiber (a penny-shaped crack problem), and (2) a composite system with a cracked matrix (an annular crack problem). The cracked composite systems are modeled with triangular and trapezoidal ring finite elements. Using NASTRAN (NASA Structural Analysis) finite element computer program, the stress and deformation fields in the cracked composite systems are calculated. The effect of fiber-matrix material combination on the stress concentrations and on the crack opening displacements is studied.

Ko, W. L.↗

DET/MPS - The GSFC Energy Balance Programs

Direct Energy Transfer (DET) and MultiMission Spacecraft Modular Power System (MPS) computer programs perform mathematical modeling and simulation to aid in design and analysis of DET and MPS spacecraft power system performance in order to determine energy balance of subsystem. DET spacecraft power system feeds output of solar photovoltaic array and nickel cadmium batteries directly to spacecraft bus. MPS system, Standard Power Regulator Unit (SPRU) utilized to operate array at array's peak power point. DET and MPS perform minute-by-minute simulation of performance of power system. Results of simulation focus mainly on output of solar array and characteristics of batteries. Both packages limited in terms of orbital mechanics, they have sufficient capability to calculate data on eclipses and performance of arrays for circular or near-circular orbits. DET and MPS written in FORTRAN-77 with some VAX FORTRAN-type extensions. Both available in three versions: GSC-13374, for DEC VAX-series computers running VMS. GSC-13443, for UNIX-based computers. GSC-13444, for Apple Macintosh computers.

Jagielski, J. M.↗

CIRCAL - On-line circuit design.

On-line nonlinear circuit design, discussing computer program for evaluating performance resulting from modifications

COMPUTER METHOD↗

Developing a safe on-orbit cryogenic depot

New U.S. space initiatives will require technology to realize planned programs such as piloted lunar and Mars missions. Key to the optimal execution of such missions are high performance orbit transfer vehicles and propellant storage facilities. Large amounts of liquid hydrogen and oxygen demand a uniquely designed on-orbit cryogenic propellant depot. Because of the inherent dangers in propellant storage and handling, a comprehensive system safety program must be established. This paper shows how the myriad and complex hazards demonstrate the need for an integrated safety effort to be applied from program conception through operational use. Even though the cryogenic depot is still in the conceptual stage, many of the hazards have been identified, including fatigue due to heavy thermal loading from environmental and operating temperature extremes, micrometeoroid and/or depot ancillary equipment impact (this is an important problem due to the large surface area needed to house the large quantities of propellant), docking and maintenance hazards, and hazards associated with extended extravehicular activity. Various safety analysis techniques were presented for each program phase. Specific system safety implementation steps were also listed. Enhanced risk assessment was demonstrated through the incorporation of these methods.

Bahr, Nicholas J.↗

Analysis of aeroelastic and resonance responses of a wind tunnel model support system

Vibrations of the National Transonic Facility model support system were analyzed using CAP-TSD (Computational Aeroelasticity Program-Transonic Small Disturbance), a three-dimensional transonic small disturbance potential code designed for aeroelastic analysis of complex configurations. The model support system was represented as a tunnel-spanning flexible wing whose structural properties were obtained from measured responses. Aeroelastic transients were calculated, assuming no structural damping, and analyzed to obtain modal stability characteristics. The results showed that there is a tendency toward a hump mode instability in one of the modes and that there are other weakly damped or unstable modes. The close proximity of the solid wind-tunnel diffuser side walls to the model support system was shown to have adverse effects on its aeroelastic stability characteristics. When the effects of the wind-tunnel walls were modeled, the analyses indicated the presence of wind-tunnel resonance modes which were not present when free-air boundary conditions were used.

Whitlow, Woodrow, Jr.↗

Development of a single-phase harmonic power flow program to study the 20 kHz AC power system for large spacecraft

The development of software is described to aid in design and analysis of AC power systems for large spacecraft. The algorithm is an important version of harmonic power flow program, HARMFLO, used for the study of AC power quality. The new program is applicable to three-phase systems typified by terrestrial power systems, and single-phase systems characteristic of space power systems. The modified HARMFLO accommodates system operating frequencies ranging from terrestrial 60 Hz to and beyond aerospace 20 kHz, and can handle both source and load-end harmonic distortions. Comparison of simulation and test results of a representative spacecraft power system shows a satisfactory correlation. Recommendations are made for the direction of future improvements to the software, to enhance its usefulness to power system designer and analysts.

Kraft, L. Alan↗

The FAA/NASA flight loads monitoring program - The prototype system and its benefits for the aviation community

The FAA established the flight load monitoring program to collect a data base of typical flight operational loads experienced by commercial transports. This system will provide a comprehensive monitoring of aircraft loading conditions with over 20 flight parameters being recorded simultaneously. NASA is designing and testing a prototype data collection and analysis system which will be implemented into an FAA operational program. This paper presents the program's objectives and the proposed development testing on a commercial Boeing 737-400. The prototype system, its data processing schemes, and reports are described. The searching criteria or flight attributes generated for each flight are listed. The data processing system will provide the aviation community with a powerful tool for the study of transport flight loading conditions and the system's flexibility will accommodate individual studies and specialized concerns.

Whitehead, Julia H.↗

The implementation and use of Ada on distributed systems with high reliability requirements

The use and implementation of Ada were investigated in distributed environments in which reliability is the primary concern. In particular, the focus was on the possibility that a distributed system may be programmed entirely in Ada so that the individual tasks of the system are unconcerned with which processors are being executed, and that failures may occur in the software and underlying hardware. A secondary interest is in the performance of Ada systems and how that performance can be gauged reliably. Primary activities included: analysis of the original approach to recovery in distributed Ada programs using the Advanced Transport Operating System (ATOPS) example; review and assessment of the original approach which was found to be capable of improvement; development of a refined approach to recovery that was applied to the ATOPS example; and design and development of a performance assessment scheme for Ada programs based on a flexible user-driven benchmarking system.

Knight, J. C.↗

Automatic control

Numerical solution of optimal control and programming problems

FEEDBACK CONTROL SYSTEM↗

The 747 primary flight control systems reliability and maintenance study

The major operational characteristics of the 747 Primary Flight Control Systems (PFCS) are described. Results of reliability analysis for separate control functions are presented. The analysis makes use of a NASA computer program which calculates reliability of redundant systems. Costs for maintaining the 747 PFCS in airline service are assessed. The reliabilities and cost will provide a baseline for use in trade studies of future flight control system design.

Source record↗

A 'user friendly' geographic information system in a color interactive digital image processing system environment

NASA's Eastern Regional Remote Sensing Applications Center (ERRSAC) has recognized the need to accommodate spatial analysis techniques in its remote sensing technology transfer program. A computerized Geographic Information System to incorporate remotely sensed data, specifically Landsat, with other relevant data was considered a realistic approach to address a given resource problem. Questions arose concerning the selection of a suitable available software system to demonstrate, train, and undertake demonstration projects with ERRSAC's user community. The very specific requirements for such a system are discussed. The solution found involved the addition of geographic information processing functions to the Interactive Digital Image Manipulation System (IDIMS). Details regarding the functions of the new integrated system are examined along with the characteristics of the software.

Campbell, W. J.↗

An implementation of the programming structural synthesis system (PROSSS)

A particular implementation of the programming structural synthesis system (PROSSS) is described. This software system combines a state of the art optimization program, a production level structural analysis program, and user supplied, problem dependent interface programs. These programs are combined using standard command language features existing in modern computer operating systems. PROSSS is explained in general with respect to this implementation along with the steps for the preparation of the programs and input data. Each component of the system is described in detail with annotated listings for clarification. The components include options, procedures, programs and subroutines, and data files as they pertain to this implementation. An example exercising each option in this implementation to allow the user to anticipate the type of results that might be expected is presented.

Rogers, J. L., Jr.↗