Search NASA⌕ Search

SEARCH · Search NASA

Results for “variability analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,045 records · Page 58

Key Environmental and Ecological Variables of Wetland CH 4 and CO 2 Fluxes Change With Warming

Wetlands are important ecosystems for the global carbon cycle, impacting regional and global methane (CH 4 ) and carbon dioxide (CO 2 ) budgets. This study examines how environmental and ecological variables impact wetland CH 4 flux and net ecosystem exchange of CO 2 (NEE) across 17 sites globally. We also quantified the importance of variables for each wetland type and site at monthly scale under normal and warm temperatures using dominance analysis. We identified soil and air temperature (TS, TA, respectively) as key variables influencing wetland CH4, and latent heat (LE) and shortwave radiation (SW) for NEE under normal and warm conditions. However, the importance of some variables shifted with warming. For predicting the variability of wetland CH4 flux under warming, gross primary productivity (GPP) and LE, replacing wind direction (WD), were dominant variables for tropical swamps, while NEE was important for high-latitude fens and bogs under warm temperatures. For wetland NEE, the role of TA and TS decreased across all wetland types with warming, while vapor pressure deficit (VPD) became more important for mid and high-latitude wetlands. Our results reveal the complex responses of wetland carbon flux to environmental and ecological variables with warming and provide new insights into improving wetland models by incorporating additional variables and accounting for the changing roles of variables in carbon flux under warming.

54 ENVIRONMENTAL SCIENCES↗

Deep Data Analysis of Conductive Phenomena on Complex Oxide Interfaces: Physics from Data Mining

Spatial variability of electronic transport in BiFeO3-CoFe2O4 (BFO-CFO) self-assembled heterostructures is explored using spatially resolved first order reversal curve (FORC) current voltage (IV) mapping. Multivariate statistical analysis of FORC-IV data classifies statistically significant behaviors and maps characteristic responses spatially. In particular, regions of grain, matrix, and grain boundary responses are clearly identified. K-means and Bayesian demixing analysis suggests the characteristic response be separated into four components, with hysteretic type behavior localized at the BFO-CFO tubular interfaces. The conditions under which Bayesian components allow direct physical interpretation are explored, and transport mechanisms at the grain boundaries and individual phases are analyzed. This approach conjoins multivariate statistical analysis with physics-based interpretation, actualizing a robust, universal, data driven approach to problem solving, which can be applied to exploration of local transport and other functional phenomena in other spatially inhomogeneous systems.

big data↗

Hybrid Symbolic-Numerical Modeling and Parametric Stability Analysis of DC–AC Power Systems

Hybrid DC-AC power systems integrating diverse inverter-based resources (IBRs) and multi-terminal high-voltage direct current (MTDC) networks represent a promising architecture for future power grids, while introducing challenges for modeling, stability analysis, and control design. This paper develops a hybrid symbolic-numerical modeling framework and tool to characterize the parametric small-signal stability of DC-AC coupled power systems. The proposed approach constructs parametric state-space models to enable efficient representation of system dynamics under varying control parameters and network configurations, with target parameters retained as symbolic variables and the remainder treated numerically. The stability analysis framework covers eigenvalue, sensitivity, and stability boundary and region characterization. Enhanced linear matrix inequality (LMI) techniques are proposed to directly certify small-signal stability over regions of parameter space while also reducing the conservativeness and computational burden. The resulting tools and frameworks enable rapid parametric model construction across diverse grid conditions, thereby facilitating stability-informed control and operation in complex DC–AC power systems.

DC–AC power systems↗

Application of Monte Carlo Methods to Perform Uncertainty and Sensitivity Analysis on Inverse Water-Rock Reactions with NETPATH

Methods were developed to quantify uncertainty and sensitivity for NETPATH inverse water-rock reaction models and to calculate dissolved inorganic carbon, carbon-14 groundwater travel times. The NETPATH models calculate upgradient groundwater mixing fractions that produce the downgradient target water chemistry along with amounts of mineral phases that are either precipitated or dissolved. Carbon-14 groundwater travel times are calculated based on the upgradient source-water fractions, carbonate mineral phase changes, and isotopic fractionation. Custom scripts and statistical code were developed for this study to facilitate modifying input parameters, running the NETPATH simulations, extracting relevant output, postprocessing the results, and producing graphs and summaries. The scripts read userspecified values for each constituent’s coefficient of variation, distribution, sensitivity parameter, maximum dissolution or precipitation amounts, and number of Monte Carlo simulations. Monte Carlo methods for analysis of parametric uncertainty assign a distribution to each uncertain variable, sample from those distributions, and evaluate the ensemble output. The uncertainty in input affected the variability of outputs, namely source-water mixing, phase dissolution and precipitation amounts, and carbon-14 travel time. Although NETPATH may provide models that satisfy the constraints, it is up to the geochemist to determine whether the results are geochemically reasonable. Two example water-rock reaction models from previous geochemical reports were considered in this study. Sensitivity analysis was also conducted to evaluate the change in output caused by a small change in input, one constituent at a time. Results were standardized to allow for sensitivity comparisons across all inputs, which results in a representative value for each scenario. The approach yielded insight into the uncertainty in water-rock reactions and travel times. For example, there was little variation in source-water fraction between the deterministic and Monte Carlo approaches, and therefore, little variation in travel times between approaches. Sensitivity analysis proved very useful for identifying the most important input constraints (dissolved-ion concentrations), which can reveal the variables that have the most influence on source-water fractions and carbon-14 travel times. Once these variables are determined, more focused effort can be applied to determining the proper distribution for each constraint. Second, Monte Carlo results for water-rock reaction modeling showed discrete and nonunique results. The NETPATH models provide the solutions that satisfy the constraints of upgradient and downgradient water chemistry. There can exist multiple, discrete solutions for any scenario and these discrete solutions cause grouping of results. As a result, the variability in output may not easily be represented by a single distribution or a mean and variance and care should be taken in the interpretation and reporting of results.

phase dissolution and precipitation amounts↗

On dynamical systems approaches and methods in f ( R ) cosmology

We discuss dynamical systems approaches and methods applied to flat Robertson-Walker models in f ( R )-gravity. We argue that a complete description of the solution space of a model requires a global state space analysis that motivates globally covering state space adapted variables. This is shown explicitly by an illustrative example, f ( R ) = R + α R {sup 2}, α > 0, for which we introduce new regular dynamical systems on global compactly extended state spaces for the Jordan and Einstein frames. This example also allows us to illustrate several local and global dynamical systems techniques involving, e.g., blow ups of nilpotent fixed points, center manifold analysis, averaging, and use of monotone functions. As a result of applying dynamical systems methods to globally state space adapted dynamical systems formulations, we obtain pictures of the entire solution spaces in both the Jordan and the Einstein frames. This shows, e.g., that due to the domain of the conformal transformation between the Jordan and Einstein frames, not all the solutions in the Jordan frame are completely contained in the Einstein frame. We also make comparisons with previous dynamical systems approaches to f ( R ) cosmology and discuss their advantages and disadvantages.

79 ASTRONOMY AND ASTROPHYSICS↗

Physical model assisted probability of detection in nondestructive evaluation

Nondestructive evaluation is used widely in many engineering and industrial areas to detect defects or flaws such as cracks inside parts or structures during manufacturing or for products in service. The standard statistical model is a simple empirical linear regression between the (possibly transformed) signal response variables and the (possibly transformed) explanatory variables. For some applications, such a simple empirical approach is inadequate. An important alternative approach is to use knowledge of the physics of the inspection process to provide information about the underlying relationship between the response and explanatory variables. Use of such knowledge can greatly increase the power and accuracy of the statistical analysis and enable, when needed, proper extrapolation outside the range of the observed explanatory variables. This paper describes a set of physical model-assisted analyses to study the capability of two different ultrasonic testing inspection methods to detect synthetic hard alpha inclusion and flat-bottom hole defects in a titanium forging disk.

42 ENGINEERING↗

Metatranscriptomics reveals a shift in microbial community composition and function during summer months in a coastal marine environment

Abstract Temperate coastal marine waters are often thermally stratified from spring through fall but can be dynamic and disrupted by tidal currents and wind‐driven upwelling. These mixing events introduce deeper, cooler water with a higher partial pressure of CO 2 (pCO2) and its associated microbial communities to the surface. Anecdotally, these events impact shellfish hatcheries and farms, warranting improved understanding of changes in composition and activity of marine microbial communities in relation to environmental processes. To characterize both compositional and functional changes associated with abiotic factors, here, we generate a reference metatranscriptome from the Strait of Georgia over representative seasons and analyze metatranscriptomic profiles of the microorganisms present within intake water containing different pCO 2 levels at a shellfish hatchery in British Columbia from June through October. Abiotic factors studied include pH, temperature, alkalinity, aragonite, calcite, and pCO 2 . Community composition changes were observed to occur at broad taxonomic levels and most notably to vary with temperature and pCO 2 . Functional gene expression profiles indicated a strong difference between early (June–July) and late summer (August–October) associated with viral activity. The taxonomic data suggest this could be due to the termination of cyanobacteria and phytoplankton blooms by viral lysis in the late season. Functional analysis indicated fewer differentially expressed transcripts associated with abiotic variables (e.g., pCO 2 ) than with the temporal effect. Microbial composition and activity in these waters vary with both short‐term effects observed alongside abiotic variation and long‐term effects observed across seasons. The analysis of both taxonomy and functional gene expression simultaneously in the same samples by environmental RNA (eRNA metatranscriptomics) provided a more comprehensive view for monitoring water bodies than either would in isolation.

Sutherland, Ben J. G.↗

SENSITIVE SEARCH FOR RADIO VARIABLES AND TRANSIENTS IN THE EXTENDED CHANDRA DEEP FIELD SOUTH

We report on an analysis of the Extended Chandra Deep Field South (E-CDFS) region using archival data from the Very Large Array, with the goal of studying radio variability and transients at the sub-milliJansky level. The 49 epochs of E-CDFS observations at 1.4 GHz sample timescales from 1 day to 3 months. We find that only a fraction (1%) of unresolved radio sources above 40 {mu}Jy are variable at the 4{sigma} level. There is no evidence that the fractional variability changes along with the known transition of radio-source populations below 1 mJy. Optical identifications of the sources show that the variable radio emission is associated with the central regions of an active galactic nucleus or a star-forming galaxy. After a detailed comparison of the efficacy of various source-finding algorithms, we use the best to carry out a transient search. No transients were found. This implies that the areal density of transients with peak flux density greater than 0.21 mJy is less than 0.37 deg{sup -2} (at a confidence level of 95%). This result is approximately an order of magnitude below the transient rate measured at 5 GHz by Bower et al. but it is consistent with more recent upper limits from Frail et al. Our findings suggest that the radio sky at 1.4 GHz is relatively quiet. For multi-wavelength transient searches, such as the electromagnetic counterparts to gravitational waves, this frequency may be optimal for reducing the high background of false positives.

79 ASTRONOMY AND ASTROPHYSICS↗

A MULTIVARIATE FIT LUMINOSITY FUNCTION AND WORLD MODEL FOR LONG GAMMA-RAY BURSTS

It is proposed that the luminosity function, the rest-frame spectral correlations, and distributions of cosmological long-duration (Type-II) gamma-ray bursts (LGRBs) may be very well described as a multivariate log-normal distribution. This result is based on careful selection, analysis, and modeling of LGRBs' temporal and spectral variables in the largest catalog of GRBs available to date: 2130 BATSE GRBs, while taking into account the detection threshold and possible selection effects. Constraints on the joint rest-frame distribution of the isotropic peak luminosity (L{sub iso}), total isotropic emission (E{sub iso}), the time-integrated spectral peak energy (E{sub p,z}), and duration (T{sub 90,z}) of LGRBs are derived. The presented analysis provides evidence for a relatively large fraction of LGRBs that have been missed by the BATSE detector with E{sub iso} extending down to {approx}10{sup 49} erg and observed spectral peak energies (E{sub p} ) as low as {approx}5 keV. LGRBs with rest-frame duration T{sub 90,z} {approx}< 1 s or observer-frame duration T{sub 90} {approx}< 2 s appear to be rare events ({approx}< 0.1% chance of occurrence). The model predicts a fairly strong but highly significant correlation ({rho} = 0.58 {+-} 0.04) between E{sub iso} and E{sub p,z} of LGRBs. Also predicted are strong correlations of L{sub iso} and E{sub iso} with T{sub 90,z} and moderate correlation between L{sub iso} and E{sub p,z}. The strength and significance of the correlations found encourage the search for underlying mechanisms, though undermine their capabilities as probes of dark energy's equation of state at high redshifts. The presented analysis favors-but does not necessitate-a cosmic rate for BATSE LGRBs tracing metallicity evolution consistent with a cutoff Z/Z{sub Sun} {approx} 0.2-0.5, assuming no luminosity-redshift evolution.

79 ASTRONOMY AND ASTROPHYSICS↗

Downscaling Aerosols and the Impact of Neglected Subgrid Processes on Direct Aerosol Radiative Forcing for a Representative Global Climate Model Grid Spacing

Recent improvements to many global climate models include detailed, prognostic aerosol calculations intended to better reproduce the observed climate. However, the trace gas and aerosol fields are treated at the grid-cell scale with no attempt to account for sub-grid impacts on the aerosol fields. This paper begins to quantify the error introduced by the neglected sub-grid variability for the shortwave aerosol radiative forcing for a representative climate model grid spacing of 75 km. An analysis of the value added in downscaling aerosol fields is also presented to give context to the WRF-Chem simulations used for the sub-grid analysis. We found that 1) the impact of neglected sub-grid variability on the aerosol radiative forcing is strongest in regions of complex topography and complicated flow patterns, and 2) scale-induced differences in emissions contribute strongly to the impact of neglected sub-grid processes on the aerosol radiative forcing. The two of these effects together, when simulated at 75 km vs. 3 km in WRF-Chem, result in an average daytime mean bias of over 30% error in top-of-atmosphere shortwave aerosol radiative forcing for a large percentage of central Mexico during the MILAGRO field campaign.

54 ENVIRONMENTAL SCIENCES↗

Evaluation of Variable Refrigerant Flow Systems Performance on Oak Ridge National Laboratory s Flexible Research Platform: Part 2 Heating Season Analysis

The performance of two HVAC systems was evaluated using ORNL’s FRP, which is a two-story, 3,200 ft2 (297.3 m2) multi-zone unoccupied building that represents a typical low-rise, small office building common in the US existing building stock. The FRP is equipped with a conventional 12.5 ton (44 kW) RTU-VAV reheat system as the baseline system. For this study, a 12 ton (42 kW) VRF with a dedicated outdoor air system (DOAS) was installed to be compared with the baseline RTU system.

47 OTHER INSTRUMENTATION↗

PHOTOMETRIC VARIABILITY OF THE DISK-INTEGRATED THERMAL EMISSION OF THE EARTH

Here we present an analysis of the global-integrated mid-infrared emission flux of the Earth based on data derived from satellite measurements. We have studied the photometric annual, seasonal, and rotational variability of the thermal emission of the Earth to determine which properties can be inferred from the point-like signal. We find that the analysis of the time series allows us to determine the 24 hr rotational period of the planet for most observing geometries, due to large warm and cold areas, identified with geographic features, which appear consecutively in the observer's planetary view. However, the effects of global-scale meteorology can effectively mask the rotation for several days at a time. We also find that orbital time series exhibit a seasonal modulation, whose amplitude depends strongly on the latitude of the observer but weakly on its ecliptic longitude. As no systematic difference of brightness temperature is found between the dayside and the nightside, the phase variations of the Earth in the infrared range are negligible. Finally, we also conclude that the phase variation of a spatially unresolved Earth-Moon system is dominated by the lunar signal.

79 ASTRONOMY AND ASTROPHYSICS↗

Impact of survey spatial variability on galaxy redshift distributions and the cosmological 3 × 2-point statistics for the Rubin Legacy Survey of Space and Time (LSST)

We investigate the impact of spatial survey non-uniformity on the galaxy redshift distributions for forthcoming data releases of the Rubin Observatory Legacy Survey of Space and Time (LSST). Specifically, we construct a mock photometry data set degraded by the Rubin OpSim observing conditions, and estimate photometric redshifts of the sample using a template-fitting photo-z estimator, BPZ, and a machine learning method, FlexZBoost. We select the Gold sample, defined as $i\lt 25.3$ for 10 yr LSST data, with an adjusted magnitude cut for each year and divide it into five tomographic redshift bins for the weak lensing lens and source samples. We quantify the change in the number of objects, mean redshift, and width of each tomographic bin as a function of the coadd i-band depth for 1-yr (Y1), 3-yr (Y3), and 5-yr (Y5) data. In particular, Y3 and Y5 have large non-uniformity due to the rolling cadence of LSST, hence provide a worst-case scenario of the impact from non-uniformity. We find that these quantities typically increase with depth, and the variation can be $10\!-\!40~{{\rm per\ cent}}$ at extreme depth values. Using Y3 as an example, we propagate the variable depth effect to the weak lensing $3\times 2$ pt analysis, and assess the impact on cosmological parameters via a Fisher forecast. We find that galaxy clustering is most susceptible to variable depth, and non-uniformity needs to be mitigated below 3 per cent to recover unbiased cosmological constraints. There is little impact on galaxy–shear and shear–shear power spectra, given the expected LSST Y3 noise.

cosmology↗

Factors Associated With Severe Acute Esophagitis From Hyperfractionated Radiotherapy With Concurrent Chemotherapy for Limited-Stage Small-Cell Lung Cancer

Purpose: To describe incidence and identify factors associated with development of severe acute esophagitis during hyperfractionated radiotherapy with concurrent chemotherapy (BID-CRT) in patients with limited-stage small-cell lung cancer (SCLC). Methods and Materials: Retrospective cohort analysis of patient-, tumor-, and treatment-related variables was performed to identify factors associated with Radiation Therapy Oncology Group (RTOG) Grade 3 acute esophagitis. Twice-daily chemoradiotherapy (BID-CRT) involved 45 Gy at 1.5 Gy per fraction, treated twice daily with concurrent platinum-based chemotherapy. Logistic regression analyses were used to identify factors associated with esophagitis. Results: Between June 1999 and June 2007, 48 patients underwent curative intent BID-CRT for SCLC and were included in the analysis. Median radiotherapy dose was 45 Gy (range, 42-51 Gy) delivered with a median 4 cycles of chemotherapy (range, 2-6). RTOG Grade 3 acute esophagitis developed in 11 patients. No patient developed Grade 4 or 5 esophagitis. Simple logistic regression analyses demonstrated a highly significant association between Grade 3 acute esophagitis and mean esophageal dose (p = 0.002) as well as relative volume dosimetric area under curve (RV-AUC; p = 0.004). Using multiple regression analysis, RV-AUC was identified as the only factor associated with Grade 3 esophagitis (p = 0.004). The most strongly associated dosimetric volume was the V15 (Grade 3 esophagitis rates of 15% vs. 64% for V15 <60% versus {>=}60%, respectively). Conclusions: RV-AUC is the factor most associated with development of Grade 3 acute esophagitis in limited stage SCLC patients receiving BID-CRT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Prevalence of Temperature Dependent Heat Capacity Changes in Protein-DNA Interactions

A large, negative {Delta}Cp of DNA binding is a thermodynamic property of the majority of sequence-specific DNA-protein interactions, and a common, but not universal property of non-sequence-specific DNA binding. In a recent study of the binding of Taq polymerase to DNA, we showed that both the full-length polymerase and its 'Klentaq' large fragment bind to primed-template DNA with significant negative heat capacities. Herein, we have extended this analysis by analyzing this data for temperature-variable heat capacity effects ({Delta}{Delta}Cp), and have similarly analyzed an additional 47 protein-DNA binding pairs from the scientific literature. Over half of the systems examined can be easily fit to a function that includes a {Delta}{Delta}Cp parameter. Of these, 90% display negative {Delta}{Delta}Cp values, with the result that the {Delta}Cp of DNA binding will become more negative with rising temperature. The results of this collective analysis have potentially significant consequences for current quantitative theories relating {Delta}Cp values to changes in accessible surface area, which rely on the assumption of temperature invariance of the {Delta}Cp of binding. Solution structural data for Klentaq polymerase demonstrate that the observed heat capacity effects are not the result of a coupled folding event.

59 BASIC BIOLOGICAL SCIENCES↗

XANES Spectroscopic Analysis of Phosphorus Speciation in Alum-Amended Poultry Litter

Aluminum sulfate (alum; Al2(SO4)3{center_dot}14H2O) is used as a chemical treatment of poultry litter to reduce the solubility and release of phosphate, thereby minimizing the impacts on adjacent aquatic ecosystems when poultry litter is land applied as a crop fertilizer. The objective of this study was to determine, through the use of X-ray absorption near edge structure (XANES) spectroscopy and sequential extraction, how alum amendments alter P distribution and solid-state speciation within the poultry litter system. Our results indicate that traditional sequential fractionation procedures may not account for variability in P speciation in heterogeneous animal manures. Analysis shows that NaOH-extracted P in alum amended litters is predominantly organic ({approx}80%), whereas in the control samples, >60% of NaOH-extracted P was inorganic P. Linear least squares fitting (LLSF) analysis of spectra collected of sequentially extracted litters showed that the P is present in inorganic (P sorbed on Al oxides, calcium phosphates) and organic forms (phytic acid, polyphosphates, and monoesters) in alum- and non-alum-amended poultry litter. When determining land application rates of poultry litter, all of these compounds must be considered, especially organic P. Results of the sequential extractions in conjunction with LLSF suggest that no P species is completely removed by a single extractant. Rather, there is a continuum of removal as extractant strength increases. Overall, alum-amended litters exhibited higher proportions of Al-bound P species and phytic acid, whereas untreated samples contained Ca-P minerals and organic P compounds. This study provides in situ information about P speciation in the poultry litter solid and about P availability in alum- and non-alum-treated poultry litter that will dictate P losses to ground and surface water systems.

09 BIOMASS FUELS↗

The anomalous thermal expansion of cuprites (Cu{sub 2}O and Ag{sub 2}O) : a combined high resolution pair distribution function and geometric analysis.

The temperature-dependent local structures of cuprites (M{sub 2}O for M = Cu{sup I}, Ag{sup I}) have been probed using variable-temperature (80-500 K) high-resolution pair distribution function (PDF) analysis of X-ray scattering data measured to very high values of momentum transfer (Q{sub max} = 35 {angstrom}{sup -1}). These noble metal oxides exhibit negative thermal expansion (NTE) behavior; however, several unusual structural features and behaviors distinguish the cuprites from other NTE frameworks the structure is inverted relative to conventional NTE frameworks and Cu{sub 2}O (but not Ag{sub 2}O) shows an unusual transition from negative to positive thermal expansion behavior at higher temperature thus motivating the present in-depth analysis of the particular thermal expansion mechanisms operating here. By coupling the local structural information from the PDFs with known geometric identities of the tetrahedra that form the framework, distortions contributing to NTE have been identified and the contrasting high temperature behaviors of the two isostructural analogues have been accounted for. Specifically, we demonstrate that thermal population of low-energy vibrational modes involving the dynamic distortion of the OM{sub 4} tetrahedra, away from the regular tetrahedral geometry (through M-O-M{prime} bending), can induce a contraction of the average tetrahedral edge length (M...M{prime}) and thus contribute to the NTE effect. This mechanism operates in combination with the transverse vibrational mechanism found in conventional NTE frameworks, where increasing transverse displacement of the bridging atom (O-M-O{prime}) draws corner-bridged polyhedra closer together.

36 MATERIALS SCIENCE↗