Search NASA⌕ Search

SEARCH · Search NASA

Results for “Applied physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Electrochemical Characterization of Degradation Modes of High-Voltage Li x Ni 0.33 Mn 0.33 Co 0.33 O 2 Electrodes

While deeply charged high-voltage cathodes can improve battery energy density, understanding and preventing any accelerated cell degradation is crucial to practical success. Here, to analyze the degradation of LiNi x Mn y Co 1–x–y O 2 (NMC) type material charged to 4.3 and 4.5 V, a physics-based model is applied to cycling data to obtain parameter estimates indicative of degradation modes, which are validated by simple electrochemical measurements and further interpreted by materials characterization. Growth rates of interfacial impedance and active material loss are greater at 4.5 V, as might be expected. However, when charged to 4.5 V, degradation rates are initially lower at a cycling C-rate of 1.0 C than at 0.5 C. Once degradation mode changes are quantified, simulations evaluate the contribution of individual degradation mode to performance losses and provide estimates of the energy-power correlation (Ragone plots) of cells after cycling.

25 ENERGY STORAGE↗

Understanding important features of deep learning models for segmentation of high-resolution transmission electron microscopy images

Cutting edge deep learning techniques allow for image segmentation with great speed and accuracy. However, application to problems in materials science is often difficult since these complex models may have difficultly learning meaningful image features that would enable extension to new datasets. In situ electron microscopy provides a clear platform for utilizing automated image analysis. In this work, we consider the case of studying coarsening dynamics in supported nanoparticles, which is important for understanding, for example, the degradation of industrial catalysts. By systematically studying dataset preparation, neural network architecture, and accuracy evaluation, we describe important considerations in applying deep learning to physical applications, where generalizable and convincing models are required. With a focus on unique challenges that arise in high-resolution images, we propose methods for optimizing performance of image segmentation using convolutional neural networks, critically examining the application of complex deep learning models in favor of motivating intentional process design.

36 MATERIALS SCIENCE↗

ITER Central Solenoid Coil Insulation Qualification

An insulation system for ITER Central Solenoid must have sufficiently high electrical and structural strength. Design efforts to bring stresses in the turn and layer insulation within allowables failed. It turned out to be impossible to eliminate high local tensile stresses in the winding pack. When high local stresses can not be designed out, the qualification procedure requires verification of the acceptable structural and electrical strength by testing. We built two 4x4 arrays of the conductor jacket with two options of the CS insulation and subjected the arrays to 1.2 million compressive cycles at 60 MPa and at 76 K. Such conditions simulated stresses in the CS insulation. We performed voltage withstand tests and after end of cycling we measured the breakdown voltages between in the arrays. After that we dissectioned the arrays and studied micro cracks in the insulation. We report details of the specimens’ preparation, test procedures and test results.

Applied↗

A study on the maximum power transfer condition in an inductively coupled plasma using transformer circuit model

Correlations between the external discharge parameters (the driving frequency ω and the chamber dimension R) and plasma characteristics (the skin depth δ and the electron-neutral collision frequency ν{sub m}) are studied using the transformer circuit model [R. B. Piejak et al., Plasma Sources Sci. Technol. 1, 179 (1992)] when the absorbed power is maximized in an inductively coupled plasma. From the analysis of the transformer circuit model, the maximum power transfer conditions, which depend on the external discharge parameters and the internal plasma characteristics, were obtained. It was found that a maximum power transfer occurs when δ≈0.38R for the discharge condition at which ν{sub m}/ω≪1, while it occurs when δ≈√(2)√(ω/ν{sub m})R for the discharge condition at which ν{sub m}/ω≫1. The results of this circuit analysis are consistent with the stable last inductive mode region of an inductive-to-capacitive mode transition [Lee and Chung, Phys. Plasmas 13, 063510 (2006)], which was theoretically derived from Maxwell's equations. Our results were also in agreement with the experimental results. From this work, we demonstrate that a simple circuit analysis can be applied to explain complex physical phenomena to a certain extent.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pore architecture of nanoporous gold and titania by hydrogen thermoporometry

Nanoporous gold (NPG) and materials derived from it by templating have complex pore architecture that determines their technologically relevant physical properties. Here, we apply high-resolution hydrogen thermoporometry to study the pore structure of NPG and NPG-derived titania nanofoam (TNF). Results reveal complex multimodal pore size distributions for NPG and TNF. The freezing–melting hysteresis is pronounced, with freezing and melting scans having entirely different shapes. Experiments involving partial freeze–melt cycles reveal the lack of direct correlation between individual freezing and melting peaks, pointing to phenomena that are beyond the Gibbs-Thomson formalism. The depression of the average freezing temperature scales linearly with the ratio of the internal surface area (measured by gas sorption) and the total pore volume derived from the density of monoliths. In conclusion, thermoporometry yields total pore volumes in good agreement with those derived from monolith densities for both NPG and TNF.

36 MATERIALS SCIENCE↗

Revisiting the plasma sheath—dust in plasma sheath

In this work, we have considered the formation of warm plasma sheath in the vicinity of a wall in a plasma with considerable presence of dust particles. As an example, we have used the parameters relevant in case of plasma sheath formed around surfaces of various solid bodies in space, though the results obtained in this work can be applied to any other physical situation such as laboratory plasma. In the ion-acoustic time scale, we neglect the dust dynamics. The dust particles affect the sheath dynamics by affecting the Poisson equation which determines the plasma potential in the sheath region. It is important to note that our calculations are valid only when the amount of dust particles is not sufficient so as to affect the plasma dynamics in the dust-acoustic time scale, but enough to affect the plasma sheath. We have assumed the current to a dust particle to be balanced throughout the analysis. This makes the grain potential dependent on plasma potential, which is then incorporated into the Poisson equation. The resultant numerical model becomes an initial value problem, which is described by a 1-D integro-differential equation, which is then solved self-consistently by incorporating the change in plasma potential caused by inclusion of the dust potential in the Poisson equation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

When action is not least for systems with action-dependent Lagrangians

The dynamics of some non-conservative and dissipative systems can be derived by calculating the first variation of an action-dependent action according to the variational principle of Herglotz. This is directly analogous to the variational principle of Hamilton commonly used to derive the dynamics of conservative systems. In a similar fashion, just as the second variation of a conservative system’s action can be used to infer whether that system’s possible trajectories are dynamically stable, so too can the second variation of the action-dependent action be used to infer whether the possible trajectories of non-conservative and dissipative systems are dynamically stable. In this paper, I show, generalizing earlier analyses of the second variation of the action for conservative systems, how to calculate the second variation of the action-dependent action and how to apply it to two physically important systems: a time-independent harmonic oscillator and a time-dependent harmonic oscillator.

Physics↗

Manifold projection image segmentation for nano-XANES imaging

As spectral imaging techniques are becoming more prominent in science, advanced image segmentation algorithms are required to identify appropriate domains in these images. We present a version of image segmentation called manifold projection image segmentation (MPIS) that is generally applicable to a broad range of systems without the need for training because MPIS uses unsupervised machine learning with a few physically motivated hyperparameters. We apply MPIS to nanoscale x-ray absorption near edge structure (XANES) imaging, where XANES spectra are collected with nanometer spatial resolution. We show the superiority of manifold projection over linear transformations, such as the commonly used principal component analysis (PCA). Moreover, MPIS maintains accuracy while reducing computation time and sensitivity to noise compared to the standard nano-XANES imaging analysis procedure. Finally, we demonstrate how multimodal information, such as x-ray fluorescence data and spatial location of pixels, can be incorporated into the MPIS framework. We propose that MPIS is adaptable for any spectral imaging technique, including scanning transmission x-ray microscopy, where the length scale of domains is larger than the resolution of the experiment.

36 MATERIALS SCIENCE↗

Closing the loop between microstructure and charge transport in conjugated polymers by combining microscopy and simulation

A grand challenge in materials science is to identify the impact of molecular composition and structure across a range of length scales on macroscopic properties. We demonstrate a unified experimental–theoretical framework that coordinates experimental measurements of mesoscale structure with molecular-level physical modeling to bridge multiple scales of physical behavior. Here we apply this framework to understand charge transport in a semiconducting polymer. Spatially-resolved nanodiffraction in a transmission electron microscope is combined with a self-consistent framework of the polymer chain statistics to yield a detailed picture of the polymer microstructure ranging from the molecular to device relevant scale. Using these data as inputs for charge transport calculations, the combined multiscale approach highlights the underrepresented role of defects in existing transport models. Short-range transport is shown to be more chaotic than is often pictured, with the drift velocity accounting for a small portion of overall charge motion. Local transport is sensitive to the alignment and geometry of polymer chains. At longer length scales, large domains and gradual grain boundaries funnel charges preferentially to certain regions, creating inhomogeneous charge distributions. While alignment generally improves mobility, these funneling effects negatively impact mobility. The microstructure is modified in silico to explore possible design rules, showing chain stiffness and alignment to be beneficial while local homogeneity has no positive effect. This combined approach creates a flexible and extensible pipeline for analyzing multiscale functional properties and a general strategy for extending the accesible length scales of experimental and theoretical probes by harnessing their combined strengths.

42 ENGINEERING↗

Rehabilitation of semi-arid coal mine spoil bank soils with mine residues and farm organic by-products

A method of rehabilitating coal mine soils was studied under the conditions of a semi-arid climate, lack of topsoil but availability of farm by-products in NE Spain. The objectives of the research were to assess a new method in order to achieve a suitable substrate for the establishment of native vegetation, to evaluate environmental impacts associated with the reclamation process, and to determine the time necessary to integrate the treated area into the surrounding environment. Eight plots (10 x 35 m{sup 2}) were established in September 1997. Substrate combinations of two types of mine spoil (coal dust and coarse-sized material), two levels of pig slurry (39 and 94 Mg ha{sup -1}dry-wt), and cereal straw (0 and 15 Mg ha{sup -1}) were applied. Monitoring of select physical and chemical soil properties and vegetation characteristics was performed from 1997 until 2005. The bulk density and the saturated hydraulic conductivity measured did not limit plant development and water availability. Initial substrate salinity (1.37 S m{sup -1}) decreased with time and in the long term did not limit plant colonization to salinity-adapted species. Initial nitrate concentration was 298 mg kg{sup -1}, but was reduced significantly to acceptable values in 3 years (55 mg kg{sup -1}) and the measured pH (7.6) was maintained at the level of initial spoil values. Vegetation cover reached up to 90%. In the treated area, spontaneous vegetation cover (15 to 70%) colonized the nonsown areas widely. In the medium term, vegetation cover tended to be higher in plots with a thicker layer of coal dust material and the higher slurry rate. Soil rehabilitation and environmental reintegration, taking into account soil and vegetation indicators, was possible in the studied area with low cost inputs using residual materials from mining activities and animal husbandry by-products.

01 COAL, LIGNITE, AND PEAT↗

Isocurvature perturbations in extra radiation

Recent cosmological observations, including measurements of the CMB anisotropy and the primordial helium abundance, indicate the existence of an extra radiation component in the Universe beyond the standard three neutrino species. In this paper we explore the possibility that the extra radiation has isocurvatrue fluctuations. A general formalism to evaluate isocurvature perturbations in the extra radiation is provided in the mixed inflaton-curvaton system, where the extra radiation is produced by the decay of both scalar fields. We also derive constraints on the abundance of the extra radiation and the amount of its isocurvature perturbation. Current observational data favors the existence of an extra radiation component, but does not indicate its having isocurvature perturbation. These constraints are applied to some particle physics motivated models. If future observations detect isocurvature perturbations in the extra radiation, it will give us a hint to the origin of the extra radiation.

79 ASTRONOMY AND ASTROPHYSICS↗

A new step forward in realistic cluster lens mass modelling: analysis of Hubble Frontier Field Cluster Abell S1063 from joint lensing, X-ray, and galaxy kinematics data

We present a new method to simultaneously and self-consistently model the mass distribution of galaxy clusters that combines constraints from strong lensing features, X-ray emission, and galaxy kinematics measurements. We are able to successfully decompose clusters into their collisionless and collisional mass components thanks to the X-ray surface brightness, as well as use the dynamics of cluster members, to obtain more accurate masses exploiting the fundamental plane of elliptical galaxies. Knowledge from all observables is included through a consistent Bayesian approach in the likelihood or in physically motivated priors. We apply this method to the galaxy cluster Abell S1063 and produce a mass model that we publicly release with this paper. The resulting mass distribution presents different ellipticities for the intra-cluster gas and the other large-scale mass components as well as deviation from elliptical symmetry in the main halo. We assess the ability of our method to recover the masses of the different elements of the cluster using a mock cluster based on a simplified version of our Abell S1063 model. Thanks to the wealth of mutliwavelength information provided by the mass model and the detected X-ray emission, we also found evidence for an ongoing merger event with gas sloshing from a smaller infalling structure into the main cluster. In agreement with previous findings, the total mass, gas profile, and gas mass fraction are all consistent with small deviations from the hydrostatic equilibrium. This new mass model for Abell S1063 is publicly available, as the lenstool extension used to construct it.

79 ASTRONOMY AND ASTROPHYSICS↗

Multiple valence-space and core-excited band terminations in Ho and Er isotopes

High-spin structures of holmium (𝑍 = 67) and erbium (𝑍 = 68) isotopes are presented near mass 160, a region where collective and single-particle modes of excitation compete in the generation of angular momentum at the highest experimentally attainable spins in atomic nuclei. The level schemes of the 156,157,158 Ho isotopes have been significantly extended, reaching spins in the 40⁢ℏ to 55⁢ℏ range, through multiple experiments utilizing the Gammasphere spectrometer. In particular, several new noncollective band-terminating states are reported for these nuclei. The nature of these states, including both valence-space terminations and core-excited oblateconfigurations, is discussed in terms of proton particle-hole (p-h) excitations across the semimagic 𝑍 = 64 shell closure. Cranked-Nilsson–Strutinsky (CNS) calculations have been used to interpret the nature of these noncollective states. The corresponding terminating states in 154–159 Er are also included, providing a systematic description of band termination in this mass region. In addition, three weak rotational structures have been assigned to 157 Ho at the highest spins. These collective bands are proposed to be based on a triaxial strongly deformed nuclear shape, involving neutron p-h excitations across the 𝑁 = 82 shell gap.

150 ≤ A ≤ 189↗

Diagnosis of information scrambling from Hamiltonian evolution under decoherence

We apply a quantum teleportation protocol based on the Hayden-Preskill thought experiment to quantify how scrambling a given quantum evolution is. It has an advantage over the direct measurement of out-of time ordered correlators when used to diagnose the information scrambling in the presence of decoherence effects stemming from a noisy quantum device. We demonstrate the protocol by applying it to two physical systems: Ising spin chain and SU(2) lattice Yang-Mills theory. To this end, we numerically simulate the time evolution of the two theories in the Hamiltonian formalism. The lattice Yang-Mills theory is implemented with a suitable truncation of Hilbert space on the basis of the Kogut-Susskind formalism. On a two-leg ladder geometry and with the lowest nontrivial spin representations, it can be mapped to a spin chain, which we call Yang-Mills-Ising model and is also directly applicable to future digital quantum simulations. Here, we find that the Yang-Mills-Ising model shows the signal of information scrambling at late times.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Factors influencing quantum evaporation of helium from polar semiconductors from first principles

While there is much indirect evidence for the existence of dark matter (DM), to date it has evaded detection. Current efforts focus on DM masses over ~GeV—to push the sensitivity of DM searches to lower masses, new DM targets and detection schemes are needed. In this work, we focus on the latter—a novel detection scheme recently proposed to detect 10–100 meV phonons in polar target materials. Previous work showed that well-motivated models of DM can interact with polar semiconductors to produce an athermal population of phonons. This new sensing scheme proposes that these phonons then facilitate quantum evaporation of 3 He from a van der Waals film deposited on the target material. However, a fundamental understanding of the underlying process is still unclear, with several uncertainties related to the precise rate of evaporation and how it can be controlled. In this work, we use ab initio density functional theory calculations to compare the adsorption energies of helium atoms on a polar target material, sodium iodide, to understand the underlying evaporation physics. We explore the role of surface termination, monolayer coverage, and elemental species on the rate of He evaporation from the target material. Using this, we discuss the optimal target features for He-evaporation experiments and their range of tunability through chemical and physical modifications such as applied field and surface termination.

36 MATERIALS SCIENCE↗

Reconstructing cosmic acceleration from modified and nonminimal gravity: The Yang-Mills case

A variant of the accelerating cosmology reconstruction program is developed for f(R) gravity and for a modified Yang-Mills/Maxwell theory. Reconstruction schemes in terms of e-foldings and by using an auxiliary scalar field are developed and carefully compared, for the case of f(R) gravity. An example of a model with a transient phantom behavior without real matter is explicitly discussed in both schemes. Further, the two reconstruction schemes are applied to the more physically interesting case of a Yang-Mills/Maxwell theory, again with explicit examples. Detailed comparison of the two schemes of reconstruction is presented also for this theory. It seems to support, as well, physical nonequivalence of the two frames.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nonlinear Wave-Packet Dynamics in a Disordered Medium

We develop an effective theory of pulse propagation in a nonlinear and disordered medium in two dimensions. The theory is formulated in terms of a nonlinear diffusion equation. Despite its apparent simplicity this equation describes novel phenomena which we refer to as 'locked explosion' and diffusive collapse. The equation can be applied to such distinct physical systems as laser beams propagating in disordered photonic crystals or Bose-Einstein condensates expanding in a disordered environment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of biaxial strain on the phase transitions of Ca ( Fe 1 – x Co x ) 2 As 2

We study the effect of applied strain as a physical control parameter for the phase transitions of Ca(Fe 1–x Co x ) 2 As 2 using resistivity, magnetization, x-ray diffraction, and 57 Fe Mossbauer spectroscopy. Biaxial strain, namely, compression of the basal plane of the tetragonal unit cell, is created through firm bonding of samples to a rigid substrate via differential thermal expansion. This strain is shown to induce a magnetostructural phase transition in originally paramagnetic samples, and superconductivity in previously nonsuperconducting ones. Lastly, the magnetostructural transition is gradual as a consequence of using strain instead of pressure or stress as a tuning parameter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗