Search NASA⌕ Search

SEARCH · Search NASA

Results for “Approximate Computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Numerical simulation of supersonic inlets using a three-dimensional viscous flow analysis

A three dimensional fully viscous computer analysis was evaluated to determine its usefulness in the design of supersonic inlets. This procedure takes advantage of physical approximations to limit the high computer time and storage associated with complete Navier-Stokes solutions. Computed results are presented for a Mach 3.0 supersonic inlet with bleed and a Mach 7.4 hypersonic inlet. Good agreement was obtained between theory and data for both inlets. Results of a mesh sensitivity study are also shown.

Anderson, B. H.↗

The dynamics and control of large flexible space structures, 3. Part A: Shape and orientation control of a platform in orbit using point actuators

The dynamics, attitude, and shape control of a large thin flexible square platform in orbit are studied. Attitude and shape control are assumed to result from actuators placed perpendicular to the main surface and one edge and their effect on the rigid body and elastic modes is modelled to first order. The equations of motion are linearized about three different nominal orientations: (1) the platform following the local vertical with its major surface perpendicular to the orbital plane; (2) the platform following the local horizontal with its major surface normal to the local vertical; and (3) the platform following the local vertical with its major surface perpendicular to the orbit normal. The stability of the uncontrolled system is investigated analytically. Once controllability is established for a set of actuator locations, control law development is based on decoupling, pole placement, and linear optimal control theory. Frequencies and elastic modal shape functions are obtained using a finite element computer algorithm, two different approximate analytical methods, and the results of the three methods compared.

Bainum, P. M.↗

Kinetic theory of relativistic plasmas

The thermalization of particle kinetic motion by binary collisions is considered for a plasma with a Boltzmann constant-temperature product approximately equal to 10 to 100 times the product of the electron mass with the square of the speed of light. At this temperature, the principal mechanism for relaxation of electron motion is via radiationless electron-electron collisions (Moller scattering). Ions are nonrelativistic, but are energetic enough so that their Coulomb scattering can be treated in the Born approximation. Relaxation times are computed and Boltzmann-equation Fokker-Planck operators are derived for the various binary-collision processes. The expression for the rate of kinetic energy exchange between electron and ion gases is derived for the case where the gases are at different temperatures.

Gould, R. J.↗

Algorithm for fuel conservative horizontal capture trajectories

A real time algorithm for computing constant altitude fuel-conservative approach trajectories for aircraft is described. The characteristics of the trajectory computed were chosen to approximate the extremal trajectories obtained from the optimal control solution to the problem and showed a fuel difference of only 0.5 to 2 percent for the real time algorithm in favor of the extremals. The trajectories may start at any initial position, heading, and speed and end at any other final position, heading, and speed. They consist of straight lines and a series of circular arcs of varying radius to approximate constant bank-angle decelerating turns. Throttle control is maximum thrust, nominal thrust, or zero thrust. Bank-angle control is either zero or aproximately 30 deg.

Neuman, F.↗

Incorporating spatial context into statistical classification of multidimensional image data

Compound decision theory is employed to develop a general statistical model for classifying image data using spatial context. The classification algorithm developed from this model exploits the tendency of certain ground-cover classes to occur more frequently in some spatial contexts than in others. A key input to this contextural classifier is a quantitative characterization of this tendency: the context function. Several methods for estimating the context function are explored, and two complementary methods are recommended. The contextural classifier is shown to produce substantial improvements in classification accuracy compared to the accuracy produced by a non-contextural uniform-priors maximum likelihood classifier when these methods of estimating the context function are used. An approximate algorithm, which cuts computational requirements by over one-half, is presented. The search for an optimal implementation is furthered by an exploration of the relative merits of using spectral classes or information classes for classification and/or context function estimation.

Bauer, M. E.↗

Recent developments in thermal radiation system analyzer (Trasys)

Changes in the thermal radiation analyzer system (TRASYS) computer program are discussed. New capabilities were added while keeping intact the same data input structure. An overview of the program structure and general capabilities is given. Where appropriate, assessments are made of new features. The application of TRASYS peripheral programs and the importance they have in developing a totally integrated thermal analysis system are discussed. Form factor computations times were reduced approximately 40 percent, and the longer flux runs were reduced 50 percent when shadow tables were used.

Vogt, R. A.↗

Numerical methods for stiff systems of two-point boundary value problems

Numerical procedures are developed for constructing asymptotic solutions of certain nonlinear singularly perturbed vector two-point boundary value problems having boundary layers at one or both endpoints. The asymptotic approximations are generated numerically and can either be used as is or to furnish a general purpose two-point boundary value code with an initial approximation and the nonuniform computational mesh needed for such problems. The procedures are applied to a model problem that has multiple solutions and to problems describing the deformation of thin nonlinear elastic beam that is resting on an elastic foundation.

Flaherty, J. E.↗

Generation of Alfven-ion cyclotron waves on auroral field lines in the presence of heavy ions

Observation of electromagnetic waves in the low-altitude auroral zone at frequencies between the proton and helium gyrofrequencies suggests that Alfven-ion cyclotron waves modified by the presence of helium ions are being excited. Estimates of the growth rates for this mode indicate that the auroral electron beam can provide the free energy for the instability. The effect of the heavy ions is to decrease the group velocity of the waves, leading to larger convective growth. Theoretical wave spectra are computed in the local approximation, which assumes that the gradient scale lengths in density and magnetic field are constant over the ray paths. Narrow banded spectral peaks similar to observations may be produced when the thickness of the electron beam is small (200 m at 3000 km altitude). Narrow beams also limit growth of whistler mode waves, which compete for the free energy of the electron beam.

Lysak, R. L.↗

Finite element methods for the inhomogeneous Navier-Stokes equations

A conforming mixed finite element method for the stationary Navier-Stokes equations with inhomogeneous boundary conditions is considered. Estimates for the error in the velocity and pressure approximations are derived. A computational example is provided to illustrate the implementation of the method.

Peterson, J. S.↗

Relativistic dispersion, the cyclotron maser instability, and auroral kilometric radiation

It is demonstrated that relativistic effects can significantly modify the wave dispersion in auroral kilometric radiation (AKR), even for only mildly relativistic electrons, when the ratio of the square of the electron plasma frequeny omega(pe) to the square of the electron cyclotron frequency Omega(e) is much less than one, which is frequently the case in the AKR source region. The k-parallel dispersion relation for waves in a relativistic Maxwellian plasma is considered for the case of omega(pe) much less than Omega(e). The results of Shkarovsky (1966) are used to evaluate the relativistic corrections to the R-X mode cutoff. The general relativistic dispersion tensor is applied to evaluate the dispersion relation for a delta function ring distribution in p-perpendicular, again assuming omega(pe) much less than Omega(e). The effect of finite velocity spread is studied by analyzing the Dory-Guest-Harris distribution in the semirelativistic approximation. The results of computer simulations for ring and shell distributions are presented.

Pritchett, P. L.↗

Passive microwave remote sensing of an anisotropic random-medium layer

The principle of reciprocity is invoked to calculate the brightness temperatures for passive microwave remote sensing of a two-layer anisotropic random medium. The bistatic scattering coefficients are first computed with the Born approximation and then integrated over the upper hemisphere to be subtracted from unity, in order to obtain the emissivity for the random-medium layer. The theoretical results are illustrated by plotting the emissivities as functions of viewing angles and polarizations. They are used to interpret remote sgnsing data obtained from vegetation canopy where the anisotropic random-medium model applies. Field measurements with corn stalks arranged in various configurations with preferred azimuthal directions are successfully interpreted with this model.

Lee, J. K.↗

Molecular photoionization processes of astrophysical and aeronomical interest

An account is given of aspects of photoionization processes in molecules, with particular reference to recent theoretical and experimental studies of partial cross sections for production of specific final electronic states and of parent and fragment ions. Such cross sections help provide a basis for specifying the state of excitation of the ionized medium, are useful for estimating the kinetic energy distributions of photoejected electrons and fragment ions, provide parent-and fragment-ion yields, and clarify the possible origins of neutral fragments in highly excited rovibronic states. A descriptive account is given of photoionization phenomena, including tabulation of valence- and inner-shell potentials for some molecules of astrophysical and aeronomical interest. Cross sectional expressions are given. Various approximations currently employed in computational studies are described briefly, threshold laws and high-energy limits are indicated, and distinction is drawn between resonant and direct photoionization phenomena. Recent experimental and theoretical studies of partial photoionization cross sections in selected compounds of astrophysical and aeronomical relevance are described and discussed.

Langhoff, P. W.↗

Approximation of discrete-time LQG compensators for distributed systems with boundary input and unbounded measurement

The approximation of optimal discrete-time linear quadratic Gaussian (LQG) compensators for distributed parameter control systems with boundary input and unbounded measurement is considered. The approach applies to a wide range of problems that can be formulated in a state space on which both the discrete-time input and output operators are continuous. Approximating compensators are obtained via application of the LQG theory and associated approximation results for infinite dimensional discrete-time control systems with bounded input and output. Numerical results for spline and modal based approximation schemes used to compute optimal compensators for a one dimensional heat equation with either Neumann or Dirichlet boundary control and pointwise measurement of temperature are presented and discussed.

Gibson, J. S.↗

Imprecise results: Utilizing partial computations in real-time systems

In real-time systems, a computation may not have time to complete its execution because of deadline requirements. In such cases, no result except the approximate results produced by the computations up to that point will be available. It is desirable to utilize these imprecise results if possible. Two approaches are proposed to enable computations to return imprecise results when executions cannot be completed normally. The milestone approach records results periodically, and if a deadline is reached, returns the last recorded result. The sieve approach demarcates sections of code which can be skipped if the time available is insufficient. By using these approaches, the system is able to produce imprecise results when deadlines are reached. The design of the Concord project is described which supports imprecise computations using these techniques. Also presented is a general model of imprecise computations using these techniques, as well as one which takes into account the influence of the environment, showing where the latter approach fits into this model.

Lin, Kwei-Jay↗

Stress-and-Strain Analysis Of Hot Metal/Fiber Composites

Macroscopic mechanical properties derived from micromechanics. Stress-and-strain equations developed to express microscopic and macroscopic mechanical properties of metals reinforced by unidirectional fibers, over range of temperatures. New equations reduce computational load by providing approximate, closed-form expressions for microscopic and pseudohomogeneous anisotropic properties of single ply reinforced by unidirectional fibers. Typical application is calculation of residual stress in newly manufactured article.

Hopkins, Dale A.↗

An automated procedure for material parameter evaluation for viscoplastic constitutive models

An automated procedure is presented for evaluating the material parameters in Walker's exponential viscoplastic constitutive model for metals at elevated temperature. Both physical and numerical approximations are utilized to compute the constants for Inconel 718 at 1100 F. When intermediate results are carefully scrutinized and engineering judgement applied, parameters may be computed which yield stress output histories that are in agreement with experimental results. A qualitative assessment of the theta-plot method for predicting the limiting value of stress is also presented. The procedure may also be used as a basis to develop evaluation schemes for other viscoplastic constitutive theories of this type.

Imbrie, P. K.↗

Electronic and transport properties of HgCdTe and HgZnTe

Band structures are calculated for HgTe, CdTe, and ZnTe. A near band-edge approximation to the coherent potential approximation is used to compute the alloy band-gap variation and electron and hole effective masses in HgZnTe and HgCdTe. Both diagonal and off-diagonal disorder are included. The consequences for hole mobility are found to be significant if anion disorder is present because of a valence-band offset.

Berding, M. A.↗