Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

DFT calculations on spectroscopic and structural properties of a NLO chromophore

The molecular geometry optimization, vibrational frequencies and gauge including atomic orbital (GIAO) {sup 1}H and {sup 13}C NMR chemical shift values of 2-(1′-(4’’’-Methoxyphenyl)-5′-(thien-2″-yl)pyrrol-2′-yl)-1,3-benzothiazole as potential nonlinear optical (NLO) material were calculated using density functional theory (DFT) HSEh1PBE method with 6–311G(d,p) basis set. The best of our knowledge, this study have not been reported to date. Additionally, a detailed vibrational study was performed on the basis of potential energy distribution (PED) using VEDA program. It is noteworthy that NMR chemical shifts are quite useful for understanding the relationship between the molecular structure and electronic properties of molecules. The computed IR and NMR spectra were used to determine the types of the experimental bands observed. Predicted values of structural and spectroscopic parameters of the chromophore were compared with each other so as to display the effects of the different substituents on the spectroscopic and structural properties. Obtained data showed that there is an agreement between the predicted and experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A low cost and large-scale synthesis of 3D photonic crystal with SP2 lattice symmetry

In this work, a novel lithographic method is proposed to prepare three-dimensional (3D) photonic crystal (PC) that is different from conventional top-down and bottom-up approaches. The method combines a 2D optical mask and off-the-axis double optical exposures to create a desirable 3D PC structure. Since the method uses only two optical exposures of a photo-resist layer, it is inherently a low-cost, high throughput and wafer-scale lithographic method. The method is implemented to make a slanted post 3D PC having the SP2 lattice symmetry. Three types of SP2 3D PC structures were successfully fabricated with a minimum feature size of d=1.5 μm over a large scale of 8x10 mm 2 , without any observable fabrication defects. The SP2 PCs are: (i) SU8 posts in air background, (ii) air pores in CdS background and (iii) Pt coated on SU8 SP2 templates. A spectroscopic study of the SP2 PCs shows select spectral regions of high reflectance, indicating the existence of a photonic stop band. This low-cost and large-scale method could enable broader technological impacts of 3D PC materials in areas such as thermo-photovoltaics and above room-temperature Bose-Einstein Condensation. Furthermore, this off-axis method could lead to the creation of an entirely new class of slanted-rod based photonic crystals, such as topological photonic crystal in 3D.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interband transitions in strained InGaAs/AlAsSb multiple-quantum-well structures

Room temperature photoreflectance (PR) was performed on strained In{sub x}Ga{sub 1-x}As/AlAsSb quantum wells (QWs) grown on InP substrates. We observed clear and well-resolved structures, which could be attributed to the interband optical transitions originating in the QWs. By comparing the transition energies measured from the PR spectra with those theoretically calculated from the confined energy levels in the QWs, we confirmed that the value of the conduction band offset of In{sub 0.8}Ga{sub 0.2}As/AlAsSb was close to 1.7 eV and the nonparabolicity of the conduction band of In{sub 0.8}Ga{sub 0.2}As was between 2.25 and 2.5, which is higher than that obtained using a three-band model.

36 MATERIALS SCIENCE↗

Structure, growth and properties of a novel polar material, KSr{sub 4}B{sub 3}O{sub 9}

A novel polar material, KSr{sub 4}B{sub 3}O{sub 9}, has been obtained by the high temperature solution method for the first time. It crystallizes in the polar space group Ama2. The material exhibits a three-dimensional structure consisting of interconnecting KO{sub 10} groups, SrO{sub x} (x=8, 9) units and isolated BO{sub 3} triangles. DSC/TG curve shows that KSr{sub 4}B{sub 3}O{sub 9} melts incongruently. The calculated band structures and the density of states of KSr{sub 4}B{sub 3}O{sub 9} suggest that its direct gap is 3.897 eV. The absorption spectrum indicates the absorption edge of KSr{sub 4}B{sub 3}O{sub 9} is about 302 nm. It produces SHG intensity about as large as that of KH{sub 2}PO{sub 4} (KDP) and is phase matchable. - Graphical abstract: Viewed along the c-axis, B(2)O{sub 3} triangles and B(3)O{sub 3} triangles are parallel with the (0 1 0) face and opposite to each other. However, all the B(1)O{sub 3} triangles have the same direction along the c-axis. So the main SHG efficiency of the compound comes from B(1)O{sub 3} triangles according to the anion group theory. Highlights: Black-Right-Pointing-Pointer A polar material, KSr{sub 4}B{sub 3}O{sub 9}, has been obtained by high temperature solution method. Black-Right-Pointing-Pointer The material consists of KO{sub 10} units, SrO{sub x}(x=8, 9) units and isolated BO{sub 3} units. Black-Right-Pointing-Pointer KSr{sub 4}B{sub 3}O{sub 9} produces SHG intensity as large as that of KDP and is phase matchable. Black-Right-Pointing-Pointer The absorption edge of KSr{sub 4}B{sub 3}O{sub 9} is about 302 nm.

36 MATERIALS SCIENCE↗

Indium tin oxide-free transparent and conductive electrode based on SnO{sub x} | Ag | SnO{sub x} for organic solar cells

A SnO{sub x} | Ag | SnO{sub x} multilayer deposited by E-beam evaporation is proposed as transparent anode for a (poly-3-hexylthiophene):[6,6]-phenyl-C{sub 61}-butyric acid methyl ester (P3HT:PCBM) bulk heterojunction based Organic Solar Cell (OSC). Such multilayers are studied and manufactured with the objective to give to the electrode its best conductivity and transparency in the visible spectral range. A transfer matrix method numerical optimization of the thicknesses of each layer of the electrode is developed to limit the number of test samples which would have been manufactured whether an empirical method was chosen. Optical characterization of the deposited SnO{sub x} and Ag thin films is performed to determine the dispersion of the complex refractive indices which are used as input parameters in the model. A satisfying agreement between numerical and experimental optical properties is found. The bare tri-layer electrodes show low sheet resistance (as low as 6.7 Ω/□) and the whole Glass | SnO{sub x} | Ag | SnO{sub x} structure presents a mean transparency on 400–700 nm spectral band as high as 67%. The multilayer is then numerically studied as anode for a P3HT:PCBM bulk heterojunction based OSC. Intrinsic absorption inside the sole active layer is calculated giving the possibility to perform optical optimization on the intrinsic absorption efficiency inside the active area by considering the media embedding the electrodes. An additional study using the morphology of the silver inserted between both oxide layers as input data is performed with a finite difference time domain 3D-method to improve the accordance between optical measurements and numerical results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Cation Size on the Electronic and Magnetic Structure of M CoO{sub 3} (M = Bi, La) from Ab Initio Calculations

Using the first-principle DFT method and LSDA+ U calculations, we have performed a detailed investigation on the structural and magnetic ground states of strongly correlated M CoO{sub 3} (M= Bi, La) perovskites. Magneticphase stabilities, structural behaviors and electronic properties of both materials have been investigated. LSDA+ U calculations show that the antiferromagnetic (AFM)-C phase in the tetragonal La/BiCoO{sub 3} is energetically more favorable than the other configurations, and both rhombohedral materials are nonmagnetic. All structural data of tetragonal BiCoO{sub 3} and rhombohedral LaCoO{sub 3} compounds are found in excellent agreement with the experiment for U{sub eff}= 6 eV. We have predicted also band gaps and magnetic moments with a good accuracy via the band structure calculations. From the total and partial densities of states, we have shown the important role of O p Co d and Bi/La s-O p hybridizations in both systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The SDSS-IV extended baryon oscillation spectroscopic survey: Luminous red galaxy target selection

Here, we describe the algorithm used to select the luminous red galaxy (LRG) sample for the extended Baryon Oscillation Spectroscopic Survey (eBOSS) of the Sloan Digital Sky Survey IV (SDSS-IV) using photometric data from both the SDSS and the Wide-field Infrared Survey Explorer. LRG targets are required to meet a set of color selection criteria and have z-band and i-band MODEL magnitudes z < 19.95 and 19.9 < i < 21.8, respectively. Our algorithm selects roughly 50 LRG targets per square degree, the great majority of which lie in the redshift range 0.6 < z < 1.0 (median redshift 0.71). We also demonstrate that our methods are highly effective at eliminating stellar contamination and lower-redshift galaxies. We perform a number of tests using spectroscopic data from SDSS-III/BOSS ancillary programs to determine the redshift reliability of our target selection and its ability to meet the science requirements of eBOSS. The SDSS spectra are of high enough signal-to-noise ratio that at least ~89% of the target sample yields secure redshift measurements. Finally, we present tests of the uniformity and homogeneity of the sample, demonstrating that it should be clean enough for studies of the large-scale structure of the universe at higher redshifts than SDSS-III/BOSS LRGs reached.

79 ASTRONOMY AND ASTROPHYSICS↗

Quartz tube extensometer for observation of Earth tides and local tectonic deformations at the Sopronbanfalva Geodynamic Observatory, Hungary

In May 1990, a quartz tube extensometer was installed in the Sopronbanfalva Geodynamic Observatory of the Geodetic and Geophysical Research Institute (GGRI) of the Hungarian Academy of Sciences for recording Earth tides and recent tectonic movements. The paper describes the construction of the extensometer and a portable calibrator used for the in situ calibration of the instrument. The extensometer is very sensitive. Its scale factor is 2.093{+-}0.032 nm/mV according to the highly precise calibration method developed at the GGRI. Since the stability of extensometers is strongly influenced by the geological structure and properties of the rocks in the vicinity of the recording site, the observatory instrument system was tested by coherence analysis between theoretical (as the input signal) and measured tidal data series (as the output signal). In the semidiurnal tidal frequency band the coherence is better than 0.95, while in the diurnal band it is about 0.8. Probably this is due to the fact that the noise is higher in the diurnal band (0.4-0.5 nstr) than in the semidiurnal band (0.19-0.22 nstr). Coherence analysis between theoretical and measured data corrected for barometric changes yielded a small improvement of coherence in both frequency bands, while using temperature data correction, no observable improvement was obtained. Results of the tidal analysis also show that the observatory instrument system is suitable for recording very small tectonic movements. The 18 years of continuous data series measured by the extensometer prove the high quality of the extensometer. On the basis of investigations, it was pointed out that further efforts should be done to improve the barometric correction method and that correction for ocean load, as well as considering topographic and cavity effects are necessary to increase the accuracy of determining tidal parameters.

58 GEOSCIENCES↗

Lattice Structure and Dynamics of Sparse Molecular Crystals: OsO 4 and RuO 4

OsO 4 and RuO 4 are molecular oxides with unique tetrameric structures and rare +8 oxidation states. Accurately modeling their properties remains challenging for density functional theory (DFT) due to weak intertetramer interactions, which standard functionals fail to capture. Here, in this work, we show that the van der Waals (vdW)-corrected density functional (vdW-DF-optB86b) provides structural parameters that are much closer to experimental values than the standard generalized gradient approximation, with volume predictions that fall within the experimentally observed range. Phonon band structure analysis shows that the inclusion of vdW interactions stabilizes soft phonon modes, highlighting the importance of dispersion corrections for accurate predictions of lattice dynamics. Experimental measurements of the phonon density of states for OsO 4 , obtained via inelastic neutron scattering, demonstrate good agreement with our vdW-DF-optB86b calculations. These results validate OsO 4 and RuO 4 as valuable benchmarks for structural and vibrational calculations via vdW-corrected DFT methods and offer insights for studying the broader class of sparse molecular materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cathodoluminescence Microscopy and Spectroscopy of Planar Deformation Features of Shocked Zircon from the Vredefort Impact Structure, South Africa

Thorough understanding of the shock metamorphic signatures of zircon will provide a basis for the application of this mineral as a powerful tool for the study of terrestrial impact structures and formations. This paper of the cathodoluminescence (CL) spectroscopic signatures of naturally shocked zircon crystals from the Vredefort Dome, South Africa contributes to the understanding of the formation of microdeformation in zircon under very high pressures. All investigated shocked samples shows an inverse relationship between the brightness of the backscattered electron (BSE) signal and the corresponding cathodoluminescence intensity of the zonation patterns. The CL spectra of samples are characterised by narrow emission lines and broad bands in the region of visible light and in the near-ultraviolet range. The emission lines result from rare earth element activators and the broad bands are associated with lattice defects. The results show a clear relationship between the CL properties of zircon and shock pressure, which confirm the possible use of these methods as shock indicators.

36 MATERIALS SCIENCE↗

Practical auxiliary basis implementation of Rung 3.5 functionals

Approximate exchange-correlation functionals for Kohn-Sham density functional theory often benefit from incorporating exact exchange. Exact exchange is constructed from the noninteracting reference system's nonlocal one-particle density matrix γ(r{sup -vector},r{sup -vector}′). Rung 3.5 functionals attempt to balance the strengths and limitations of exact exchange using a new ingredient, a projection of γ(r{sup -vector},r{sup -vector} ′) onto a semilocal model density matrix γ{sub SL}(ρ(r{sup -vector}),∇ρ(r{sup -vector}),r{sup -vector}−r{sup -vector} ′). γ{sub SL} depends on the electron density ρ(r{sup -vector}) at reference point r{sup -vector}, and is closely related to semilocal model exchange holes. We present a practical implementation of Rung 3.5 functionals, expanding the r{sup -vector}−r{sup -vector} ′ dependence of γ{sub SL} in an auxiliary basis set. Energies and energy derivatives are obtained from 3D numerical integration as in standard semilocal functionals. We also present numerical tests of a range of properties, including molecular thermochemistry and kinetics, geometries and vibrational frequencies, and bandgaps and excitation energies. Rung 3.5 functionals typically provide accuracy intermediate between semilocal and hybrid approximations. Nonlocal potential contributions from γ{sub SL} yield interesting successes and failures for band structures and excitation energies. The results enable and motivate continued exploration of Rung 3.5 functional forms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Adding flexibility to the “particles-on-a-sphere” model for large-amplitude motion: POSflex force field for protonated methane

The so-called “particles-on-a-sphere” (POS) model has been introduced a while ago in order to describe in simple terms large-amplitude motion of polyatomic hydrides, XH{sub n}. The POS model of protonated methane, CH{sub 5}{sup +}, has been shown to capture well the essence of the fluxional nature of this enigmatic floppy molecule. Here, we extend this model to the POSflex force field by adding flexibility to the C–H bonds, which are constrained to a common fixed bond length in the original model. This makes the present model extremely efficient for computer simulation, including path integral molecular dynamics in order to assess the crucial quantum effects on nuclear motion at low temperatures. Moreover, the POSflex force field can be conveniently used to study microsolvation effects upon combining it with intermolecular pair potentials to account for solute-solvent interactions. Upon computing static properties as well as thermal and quantum fluctuation effects at ambient and low temperatures, respectively, it is shown that the POSflex model is very well suited to describe the structural properties of bare CH{sub 5}{sup +}, including hydrogen scrambling and thus fluxionality in the first place. The far- to mid-infrared spectrum up to the bending band is roughly described, whereas the model fails to account for the well-structured stretching band by construction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A projection-free method for representing plane-wave DFT results in an atom-centered basis

Plane wave density functional theory (DFT) is a powerful tool for gaining accurate, atomic level insight into bulk and surface structures. Yet, the delocalized nature of the plane wave basis set hinders the application of many powerful post-computation analysis approaches, many of which rely on localized atom-centered basis sets. Traditionally, this gap has been bridged via projection-based techniques from a plane wave to atom-centered basis. We instead propose an alternative projection-free approach utilizing direct calculation of matrix elements of the converged plane wave DFT Hamiltonian in an atom-centered basis. This projection-free approach yields a number of compelling advantages, including strict orthonormality of the resulting bands without artificial band mixing and access to the Hamiltonian matrix elements, while faithfully preserving the underlying DFT band structure. The resulting atomic orbital representation of the Kohn-Sham wavefunction and Hamiltonian provides a gateway to a wide variety of analysis approaches. We demonstrate the utility of the approach for a diverse set of chemical systems and example analysis approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiple Scattering Effects of Trees on L-band Microwave Using a Hybrid Method

The multiple scattering of electromagnetic waves in forests is studied using a two-step hybrid method. First, the T-matrix of a single tree is calculated based on its far-field computed with the full-wave simulations of the FEKO software. The T-matrix captures the multiple scattering caused by the tree structure. Second, the the interactions among different trees are considered using the T-matrices of the individual trees and the Foldy-Lax equations. The result of the two-step hybrid method is validated with FEKO by solving scattering from two trees directly. The multiple scattering effects are illustrated by the field solutions.

Yueh, Simon↗

Thermoelectric properties of binary LnN (Ln=La and Lu): First principles study

First principles density functional calculations were carried out to study the electronic structure and thermoelectric properties of LnN (Ln = La and Lu) using the full potential linearized augmented plane wave (FP-LAPW) method. The thermoelectric properties were calculated by solving the Boltzmann transport equation within the constant relaxation time approximation. The obtained lattice parameters are in good agreement with the available experimental and other theoretical results. The calculated band gaps using the Tran-Blaha modified Becke-Johnson potential (TB-mBJ), of both compounds are in good agreement with the available experimental values. Thermoelectric properties like thermopower (S), electrical conductivity scaled by relaxation time (σ/τ) and power-factor (S{sup 2}σ/τ) are calculated as functions of the carrier concentration and temperature for both compounds. The calculated thermoelectric properties are compared with the available experimental results of the similar material ScN.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Curated Collection of More than 20,000 Experimentally Reported One-Dimensional Metal–Organic Frameworks

Herein, a collection of more than 20,000 experimentally derived crystal structures for metal–organic frameworks (MOFs) that do not have two- or three-dimensional covalently bonded networks has been developed from the materials available at the Cambridge Crystallographic Data Centre. Of these 20,000 1D MOFs, more than 12,000 structures have been verified to be solvent-free and in exact agreement with the stoichiometry of the synthesized materials. More than 10% of the complete data set comprise materials including two or more distinct metals. The band gaps of more than 12,000 1D MOFs have been computed at the density functional theory-generalized gradient approximation level, finding more than 2000 materials that have a zero band gap. Molecular simulations of CH4 adsorption in a small number of 1D MOFs indicated that adsorbate-induced deformation plays a significant role in determining adsorption isotherms in these materials. As a result, methods that have been used previously for high-throughput predictions of molecular adsorption in 3D MOFs are not suitable for 1D MOFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of nanosecond time-resolved infrared detection at the LEAF pulse radiolysis facility

When coupled with transient absorption spectroscopy, pulse radiolysis, which utilizes high-energy electron pulses from an accelerator, is a powerful tool for investigating the kinetics and thermodynamics of a wide range of radiation-induced redox and electron transfer processes. The majority of these investigations detect transient species in the UV, visible, or near-IR spectral regions. Unfortunately, the often-broad and featureless absorption bands in these regions can make the definitive identification of intermediates difficult. Time-resolved vibrational spectroscopy would offer much improved structural characterization, but has received only limited application in pulse radiolysis. In this paper, we describe in detail the development of a unique nanosecond time-resolved infrared (TRIR) detection capability for condensed-phase pulse radiolysis on a new beam line at the LEAF facility of Brookhaven National Laboratory. The system makes use of a suite of high-power, continuous wave external-cavity quantum cascade lasers as the IR probe source, with coverage from 2330-1051 cm⁻¹. The response time of the TRIR detection setup is ~40 ns, with a typical sensitivity of ~100 µOD after 4-8 signal averages using a dual-beam probe/reference normalization detection scheme. As a result, this new detection method has enabled mechanistic investigations of a range of radiation-induced chemical processes, some of which are highlighted here.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic Properties and Photocatalytic Behavior of Co Co-doped BiFeO{sub 3}:Er

The multiferroic materials Bi{sub 0.95}Er{sub 0.05}Fe{sub 1−x}Co{sub x} O{sub 3} (x = 0, 0.01, 0.03, and 0.05) are synthesized by solvothermal method. X-ray diffraction pattern is used to confirm the formation of rhombohedral crystal structure. TEM images show agglomerated nanosize particles. With the concentration of Co, a red shift is observed in the charge transfer transition of O{sub 2p}-Fe{sub 3d} band and band gap decreases. At higher concentration of Co, the saturation magnetization enhances and coercivity also varies with the concentration of Co. The photocatalytic degradation of methylene blue is evaluated under the visible light with the assistance of H{sub 2}O{sub 2}. With the increase in Co concentration, the photocatalytic activity decreases. The main species responsible for the degradation is found out using scavengers like ammonium oxalate, silver nitrate, p-benzoquinone, and tert-butyl-alcohol. The possible mechanism for the degradation of dye is explained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗